Using eye lens diameter as age indicator of young Lithognathus mormyrus and Diplodus vulgaris

Eye lens diameter was analyzed in two sparid fish species, Lithognathus mormyrus and Diplodus vulgaris, in order to determine the possibility of using these data for age determination. The results showed that the technique could be adopted for determining the age of the two species when the specimens are very young. The method is especially useful for age determination when otolith or scale rings are not visible or when false rings may give erroneous readings.

The role of small indigenous fish species in food and nutrition security in Bangladesh

In Bangladesh, only 6% of the daily food intake is animal food of which fish accounts for 50%. Rice is the mainstay, making up 60% of the daily food intake. However, many nutrients such as vitamins A and C, iron, calcium, zinc and iodine are not found in rice and have to be obtained from other sources. Small indigenous fish are a vital contribution to the diet of the rural poor in Bangladesh, where more than 30,000 children go blind every year from vitamin A deficiency and 70% of women and children are iron-deficient. Small fish, which are less than 10 cm in length and usually eaten whole with the organs and bones, contain large amount of calcium and possibly iron and zinc. The largest fish promoted in aquaculture do not contribute significantly to calcium intake. Some species also contain large amount of vitamin A. Much of the small indigenous fish (SIS) of Bangladesh are caught in floodplains and natural waterbodies. Small fish are eaten frequently in small amounts and are more equally distributed among family members than big fish of which men get the larger share. Unfortunately, overfishing and the deterioration of natural habitats have resulted in a decline in SIS. When measures are taken to improve food and nutrition security, there should be a focus on production of small fish so that greater quantities are accessible for consumption by the rural poor.

Efeitos da terapia periodontal na função endotelial e na expressão de marcadores inflamatórios sistêmicos

A periodontite é uma doença infecciosa, crônica e altamente prevalente causando uma resposta inflamatória. A infecção e a inflamação são consideradas a base etiológica para o desenvolvimento da aterosclerose. Recentes estudos indicam que a periodontite severa pode influenciar o aumento de marcadores inflamatórios e de disfunção endotelial associados com o aumento de risco da doença coronariana e o acidente vascular cerebral. Embora alguns estudos tenham sugerido esta associação, os reais efeitos do tratamento da doença periodontal sobre a rede complexa de marcadores envolvidos na aterosclerose são pouco conhecidos. O objetivo deste estudo foi avaliar o efeito da terapia periodontal nos biomarcadores inflamatórios (TNF-α, fibrinogênio, PCRus, INFγ, IL-1β, IL-6 e IL-10), perfil lipídico (CT, HDL, LDL, TG, oxLDL e anti-oxLDL) e função endotelial (IMT) das artérias carótidas. Um total de trinta e dois indivíduos saudáveis sistemicamente e afetados pela periodontite severa (16 mulheres, 16 homens; 51,87 anos de idade), incluindo 17 sujeitos para o grupo teste e 15 sujeitos para o grupo controle foram recrutados para o estudo. A ultrassonografia das artérias carótidas e os níveis séricos inflamatórios foram avaliados no início, 40 e 100 dias após o tratamento periodontal não-cirúrgico, comparando tempo e grupos. O tratamento periodontal resultou em significante redução dos parâmetros da doença periodontal. O grupo que recebeu tratamento mostrou decréscimos significativos de oxLDL (P<0.0001), anti-oxLDL (P<0,0001), TNF-α (P<0,0001), fibrinogênio (P=0,008), INFγ (P<0,0001), IL-1β (P<0,0001), IL-6 (P<0,0001), IMT (P=0,006) e significante aumento de IL-10 (P<0,0001) após 100 dias do tratamento periodontal comparando com grupo controle. Entretanto, os resultados não foram significativos para PCRu (P=0,109), colesterol total (P=0,438), HDL (P=0,119), LDL (P=0,425) e triglicerídeos (P=0,939). Com base nestes resultados, o tratamento da periodontite pode melhorar o perfil inflamatório e a função endotelial, sendo uma importante ferramenta adicional para a prevenção das doenças cardiovasculares.

Limnological conditions of naturally turbid ponds and its effects on fish growth

An experiment was conducted on six naturally turbid ponds in the village of Salakandi situated to the south-west corner of Bangladesh Agricultural University, Mymensingh for a period of three months from July to September '96. The experiment was performed by studying the physicochemical factors of water and soil, the biological factors such as densities of phytoplankton and zooplankton, and the growth of fishes. During the experimental period water turbidity varied among ponds. The highest value of turbidity was found to be 679±183.6 FTU in pond 1 and the lowest was 158±23.31 FTU in pond 4. The maximum and the minimum water transparency were recorded in the month of July and September respectably. The lowest net weight of fishes was found 28.8 kg/ha/year in pond 1 due to high turbidity and the highest was 35.8 kg/ha/year in pond 4 due to low turbidity. Most of the correlations between turbidity and transparency, phytoplankton, and zooplankton were significant at 1% and 5% levels.

Contrasting code performances for computational aeroacoustics of jets

The numerical propagation of subcritical Tollmein-Schlichting (T-S), inviscid vortical and cut-on acoustic waves is explored. For the former case, the performances of the very different NEAT, NTS, HYDRA, FLUXp and OSMIS3D codes is studied. A modest/coarse hexahedral computational grid that starkly shows differences between the different codes and schemes used in them is employed. For the same order of discretization the five codes show similar results. The unstructured codes are found to propagate vortical and acoustic waves well on triangular cell meshes but not the T-S wave. The above code contrasting exercise is then carried out using implicit LES or Smagorinsky LES for and Ma = 0.9 plane jet on modest 0.5 million cell grids moving to circa 5 million cell grids. For this case, even on the coarse grid, for all codes results were generally encouraging. In general, the spread in computational results is less than the spread of the measurements. Interestingly, the finer grid turbulence intensity levels are slightly more under-predicted than those of the coarse grid. This difference is attributed to the numerical dispersion error having a favourable coarse grid influence. For a non-isothermal jet, HYDRA and NTS also give encouraging results. Peak turbulence values along the jet centreline are in better agreement with measurements than for the isothermal jets. Copyright © 2006 by University of Wales.

Laboratory culture of Moina with organic ana inorganic fertilizers

An experiment was conducted in the laboratory condition to determine the effect of organic (poultry drop, cow dung and mustard oil cake) and inorganic fertilizer (urea) on production, reproduction rate and maturation time of Moina species. Production rate was also determined in both aerated and non-aerated system in plastic containers with carrying capacity of 2.5-liter each. Total production was significantly higher in both aerated (2475 individuals/2.5 l water) and non-aerated (3253 individuals/2.5 l water) containers using poultry manure compared to other fertilizers. Moreover, the reproduction rate and maturation time in poultry drops showed distinct efficacy in Moina species. Reproduction rate of 11 individuals was the maximal while lowest maturation time was found 78 hours. Reproduction and maturation were induced surprisingly in test tube where the aeration system was absent.

Milt quality determination of a critically endangered fish, olive barb (Puntius sarana, Ham.) in Bangladesh

The present study was aimed to evaluate the characteristics of the olive barb sperm. Milt was collected fortnightly from 49 male fish (mean weight 90.8 g and length 18.64 cm) from April to July in 2008. In the olive barb ejaculated milt, volume (µl/g), motility (%), duration of motility (s), concentration (x 10 super(10)/ml) and pH values were found to be 6.06±0.32, 88.27±0.71, 171.41±7.41, 5.16±0.05 and 7.75±0.04, respectively. Milt volume was significantly (P<0.05) correlated with sperm concentration. Milt volume, sperm concentration, motility and duration of motility significantly varied (P<0.05) during spawning season.

Hostile attributional bias and aggressive behavior in global context.

We tested a model that children's tendency to attribute hostile intent to others in response to provocation is a key psychological process that statistically accounts for individual differences in reactive aggressive behavior and that this mechanism contributes to global group differences in children's chronic aggressive behavior problems. Participants were 1,299 children (mean age at year 1 = 8.3 y; 51% girls) from 12 diverse ecological-context groups in nine countries worldwide, followed across 4 y. In year 3, each child was presented with each of 10 hypothetical vignettes depicting an ambiguous provocation toward the child and was asked to attribute the likely intent of the provocateur (coded as benign or hostile) and to predict his or her own behavioral response (coded as nonaggression or reactive aggression). Mothers and children independently rated the child's chronic aggressive behavior problems in years 2, 3, and 4. In every ecological group, in those situations in which a child attributed hostile intent to a peer, that child was more likely to report that he or she would respond with reactive aggression than in situations when that same child attributed benign intent. Across children, hostile attributional bias scores predicted higher mother- and child-rated chronic aggressive behavior problems, even controlling for prior aggression. Ecological group differences in the tendency for children to attribute hostile intent statistically accounted for a significant portion of group differences in chronic aggressive behavior problems. The findings suggest a psychological mechanism for group differences in aggressive behavior and point to potential interventions to reduce aggressive behavior.

Mechanistic-based Design-Integrated Reliability Validation Framework for Mechanical Systems

Abstract: New product design challenges, related to customer needs, product usage and environments, face companies when they expand their product offerings to new markets; Some of the main challenges are: the lack of quantifiable information, product experience and field data. Designing reliable products under such challenges requires flexible reliability assessment processes that can capture the variables and parameters affecting the product overall reliability and allow different design scenarios to be assessed. These challenges also suggest a mechanistic (Physics of Failure-PoF) reliability approach would be a suitable framework to be used for reliability assessment. Mechanistic Reliability recognizes the primary factors affecting design reliability. This research views the designed entity as a “system of components required to deliver specific operations”; it addresses the above mentioned challenges by; Firstly: developing a design synthesis that allows a descriptive operations/ system components relationships to be realized; Secondly: developing component’s mathematical damage models that evaluate components Time to Failure (TTF) distributions given: 1) the descriptive design model, 2) customer usage knowledge and 3) design material properties; Lastly: developing a procedure that integrates components’ damage models to assess the mechanical system’s reliability over time. Analytical and numerical simulation models were developed to capture the relationships between operations and components, the mathematical damage models and the assessment of system’s reliability. The process was able to affect the design form during the conceptual design phase by providing stress goals to meet component’s reliability target. The process was able to numerically assess the reliability of a system based on component’s mechanistic TTF distributions, besides affecting the design of the component during the design embodiment phase. The process was used to assess the reliability of an internal combustion engine manifold during design phase; results were compared to reliability field data and found to produce conservative reliability results. The research focused on mechanical systems, affected by independent mechanical failure mechanisms that are influenced by the design process. Assembly and manufacturing stresses and defects’ influences are not a focus of this research.