Experimental and numerical analysis of reinforced concrete elements subjected to blast loading

El hormigón es uno de los materiales de construcción más empleados en la actualidad debido a sus buenas prestaciones mecánicas, moldeabilidad y economía de obtención, entre otras ventajas. Es bien sabido que tiene una buena resistencia a compresión y una baja resistencia a tracción, por lo que se arma con barras de acero para formar el hormigón armado, material que se ha convertido por méritos propios en la solución constructiva más importante de nuestra época. A pesar de ser un material profusamente utilizado, hay aspectos del comportamiento del hormigón que todavía no son completamente conocidos, como es el caso de su respuesta ante los efectos de una explosión. Este es un campo de especial relevancia, debido a que los eventos, tanto intencionados como accidentales, en los que una estructura se ve sometida a una explosión son, por desgracia, relativamente frecuentes. La solicitación de una estructura ante una explosión se produce por el impacto sobre la misma de la onda de presión generada en la detonación. La aplicación de esta carga sobre la estructura es muy rápida y de muy corta duración. Este tipo de acciones se denominan cargas impulsivas, y pueden ser hasta cuatro órdenes de magnitud más rápidas que las cargas dinámicas impuestas por un terremoto. En consecuencia, no es de extrañar que sus efectos sobre las estructuras y sus materiales sean muy distintos que las que producen las cargas habitualmente consideradas en ingeniería. En la presente tesis doctoral se profundiza en el conocimiento del comportamiento material del hormigón sometido a explosiones. Para ello, es crucial contar con resultados experimentales de estructuras de hormigón sometidas a explosiones. Este tipo de resultados es difícil de encontrar en la literatura científica, ya que estos ensayos han sido tradicionalmente llevados a cabo en el ámbito militar y los resultados obtenidos no son de dominio público. Por otra parte, en las campañas experimentales con explosiones llevadas a cabo por instituciones civiles el elevado coste de acceso a explosivos y a campos de prueba adecuados no permite la realización de ensayos con un elevado número de muestras. Por este motivo, la dispersión experimental no es habitualmente controlada. Sin embargo, en elementos de hormigón armado sometidos a explosiones, la dispersión experimental es muy acusada, en primer lugar, por la propia heterogeneidad del hormigón, y en segundo, por la dificultad inherente a la realización de ensayos con explosiones, por motivos tales como dificultades en las condiciones de contorno, variabilidad del explosivo, o incluso cambios en las condiciones atmosféricas. Para paliar estos inconvenientes, en esta tesis doctoral se ha diseñado un novedoso dispositivo que permite ensayar hasta cuatro losas de hormigón bajo la misma detonación, lo que además de proporcionar un número de muestras estadísticamente representativo, supone un importante ahorro de costes. Con este dispositivo se han ensayado 28 losas de hormigón, tanto armadas como en masa, de dos dosificaciones distintas. Pero además de contar con datos experimentales, también es importante disponer de herramientas de cálculo para el análisis y diseño de estructuras sometidas a explosiones. Aunque existen diversos métodos analíticos, hoy por hoy las técnicas de simulación numérica suponen la alternativa más avanzada y versátil para el cálculo de elementos estructurales sometidos a cargas impulsivas. Sin embargo, para obtener resultados fiables es crucial contar con modelos constitutivos de material que tengan en cuenta los parámetros que gobiernan el comportamiento para el caso de carga en estudio. En este sentido, cabe destacar que la mayoría de los modelos constitutivos desarrollados para el hormigón a altas velocidades de deformación proceden del ámbito balístico, donde dominan las grandes tensiones de compresión en el entorno local de la zona afectada por el impacto. En el caso de los elementos de hormigón sometidos a explosiones, las tensiones de compresión son mucho más moderadas, siendo las tensiones de tracción generalmente las causantes de la rotura del material. En esta tesis doctoral se analiza la validez de algunos de los modelos disponibles, confirmando que los parámetros que gobiernan el fallo de las losas de hormigón armado ante explosiones son la resistencia a tracción y su ablandamiento tras rotura. En base a los resultados anteriores se ha desarrollado un modelo constitutivo para el hormigón ante altas velocidades de deformación, que sólo tiene en cuenta la rotura por tracción. Este modelo parte del de fisura cohesiva embebida con discontinuidad fuerte, desarrollado por Planas y Sancho, que ha demostrado su capacidad en la predicción de la rotura a tracción de elementos de hormigón en masa. El modelo ha sido modificado para su implementación en el programa comercial de integración explícita LS-DYNA, utilizando elementos finitos hexaédricos e incorporando la dependencia de la velocidad de deformación para permitir su utilización en el ámbito dinámico. El modelo es estrictamente local y no requiere de remallado ni conocer previamente la trayectoria de la fisura. Este modelo constitutivo ha sido utilizado para simular dos campañas experimentales, probando la hipótesis de que el fallo de elementos de hormigón ante explosiones está gobernado por el comportamiento a tracción, siendo de especial relevancia el ablandamiento del hormigón. Concrete is nowadays one of the most widely used building materials because of its good mechanical properties, moldability and production economy, among other advantages. As it is known, it has high compressive and low tensile strengths and for this reason it is reinforced with steel bars to form reinforced concrete, a material that has become the most important constructive solution of our time. Despite being such a widely used material, there are some aspects of concrete performance that are not yet fully understood, as it is the case of its response to the effects of an explosion. This is a topic of particular relevance because the events, both intentional and accidental, in which a structure is subjected to an explosion are, unfortunately, relatively common. The loading of a structure due to an explosive event occurs due to the impact of the pressure shock wave generated in the detonation. The application of this load on the structure is very fast and of very short duration. Such actions are called impulsive loads, and can be up to four orders of magnitude faster than the dynamic loads imposed by an earthquake. Consequently, it is not surprising that their effects on structures and materials are very different than those that cause the loads usually considered in engineering. This thesis broadens the knowledge about the material behavior of concrete subjected to explosions. To that end, it is crucial to have experimental results of concrete structures subjected to explosions. These types of results are difficult to find in the scientific literature, as these tests have traditionally been carried out by armies of different countries and the results obtained are classified. Moreover, in experimental campaigns with explosives conducted by civil institutions the high cost of accessing explosives and the lack of proper test fields does not allow for the testing of a large number of samples. For this reason, the experimental scatter is usually not controlled. However, in reinforced concrete elements subjected to explosions the experimental dispersion is very pronounced. First, due to the heterogeneity of concrete, and secondly, because of the difficulty inherent to testing with explosions, for reasons such as difficulties in the boundary conditions, variability of the explosive, or even atmospheric changes. To overcome these drawbacks, in this thesis we have designed a novel device that allows for testing up to four concrete slabs under the same detonation, which apart from providing a statistically representative number of samples, represents a significant saving in costs. A number of 28 slabs were tested using this device. The slabs were both reinforced and plain concrete, and two different concrete mixes were used. Besides having experimental data, it is also important to have computational tools for the analysis and design of structures subjected to explosions. Despite the existence of several analytical methods, numerical simulation techniques nowadays represent the most advanced and versatile alternative for the assessment of structural elements subjected to impulsive loading. However, to obtain reliable results it is crucial to have material constitutive models that take into account the parameters that govern the behavior for the load case under study. In this regard it is noteworthy that most of the developed constitutive models for concrete at high strain rates arise from the ballistic field, dominated by large compressive stresses in the local environment of the area affected by the impact. In the case of concrete elements subjected to an explosion, the compressive stresses are much more moderate, while tensile stresses usually cause material failure. This thesis discusses the validity of some of the available models, confirming that the parameters governing the failure of reinforced concrete slabs subjected to blast are the tensile strength and softening behaviour after failure. Based on these results we have developed a constitutive model for concrete at high strain rates, which only takes into account the ultimate tensile strength. This model is based on the embedded Cohesive Crack Model with Strong Discontinuity Approach developed by Planas and Sancho, which has proved its ability in predicting the tensile fracture of plain concrete elements. The model has been modified for its implementation in the commercial explicit integration program LS-DYNA, using hexahedral finite elements and incorporating the dependence of the strain rate, to allow for its use in dynamic domain. The model is strictly local and does not require remeshing nor prior knowledge of the crack path. This constitutive model has been used to simulate two experimental campaigns, confirming the hypothesis that the failure of concrete elements subjected to explosions is governed by their tensile response, being of particular relevance the softening behavior of concrete.

Análisis de la cadena de valor, canales cortos de comercialización y horticultura multifuncional como opciones de puesta en valor: Caso de la Huerta de Aranjuez

La Vega de Aranjuez ha sido desde hace siglos conocida por la notoriedad de sus jardines y huertas históricas y también, en épocas más recientes, por ser la despensa de Madrid. A mediados del siglo XX, sin embargo, con las transformaciones que el sector agrario ha experimentado no sólo a nivel local, sino a escala global, empezó un proceso de declive que se ha acentuado en los últimos años. Paralelamente, en el año 2001, la Unesco declara el Paisaje Cultural de Aranjuez, como Patrimonio de la Humanidad con un valor universal excepcional. Parte de lo que sustenta este reconocimiento a nivel internacional radica en las peculiaridades del paisaje que conforma la actividad agraria. El cambio de orientación, eminentemente hortofrutícola hacia cultivos extensivos y superficies en barbecho, y la pérdida de importancia del sector, no han pasado desapercibidos para la administración local y han sido varios los intentos de recuperación y dinamización del sector en los últimos años. La investigación de la que es objeto esta Tesis Doctoral surgió por iniciativa del Ayuntamiento de Aranjuez, que en al año 2010 deseó conocer la situación del sector hortícola en el municipio, para lo cual, encargó un estudio a la UPM-ETSIA. Para conocer la realidad desde una perspectiva integral, se planteó abordar el análisis desde la perspectiva de Cadena de Valor. Las implicaciones de este concepto, su evolución y su papel como instrumento de análisis de la cadena alimentaria, han sido revisadas y presentadas en el epígrafe del Marco Conceptual. Por cadena de valor se entiende el conjunto de procesos desde el consumidor, a través de los proveedores que proporcionan productos, servicios e información que añaden valor hacia los clientes (Lambert & Cooper, 2000; Chen, 2004). Para el análisis de la situación del sector hortícola en Aranjuez, se procedió en varios pasos, los cuales constituyeron la primera fase de la investigación y contemplaron lo siguiente: 1. La identificación de los problemas y de las demandas de los actores de la cadena, realizando cortes transversales en el mercado a distintos niveles para conocer los puntos de vista de los operadores de la cadena (Gunasekaran & Patel ,2004; Rojas, 2009; Schiefer, 2007). Para ello se diseñaron cuestionarios y se dirigieron a representantes de cinco eslabones de la cadena presentes en el caso de estudio: Agricultores (15), Mayoristas (11), Detallistas (55), Consumidores (85) y Restaurantes (36), tanto en Aranjuez como en Madrid (un total de 202). 2. Análisis D.A.F.O de cada uno de los eslabones y de la cadena completa, como herramienta para identificar y sintetizar la problemática y las potencialidades del sector. 3. Análisis global de la Cadena de Valor mediante el Método de Organización Sectorial, según Briz, de Felipe y Briz (2010), el cual permite estudiar aspectos de la estructura, la conducta y el funcionamiento de la cadena. 4. Jornada de análisis por parte de un Panel de Expertos en la sede de la Fundación Foro Agrario, en la cual se presentaron las conclusiones del análisis de la cadena de valor y se plantearon estrategias para la dinamización del sector. Con los resultados del análisis en esta primera fase de la investigación, se obtuvo una panorámica de la cadena de valor. Algunos de los aspectos más destacados son los siguientes: • El eslabón productivo en Aranjuez está muy atomizado y trabaja por lo general de forma independiente. Cultiva hasta veinte productos hortícolas diferentes, entre los cuales los frutales están casi en desaparición y hay poca presencia de producto ecológico. Le preocupan los precios poco estables y bajos y por lo general no trabaja con contratos. •El eslabón mayorista prácticamente carece de presencia en Aranjuez y está representado en su mayoría por operadores de Mercamadrid, los cuales demandan mayores volúmenes y mejor normalización de los productos hortícolas procedentes de Aranjuez. • El eslabón detallista consultado es diverso (con representación de comercios minoristas, supermercados e hipermercados) y también demanda mayores volúmenes de producción y mejoras en la normalización. Un 80% conoce los productos de Aranjuez, especialmente el espárrago y la fresa-fresón citados en un 74% y 63% de los casos respectivamente. • En el eslabón de consumidores, el 79% de los encuestados da importancia a la procedencia de los productos hortícolas y un 82% conoce los productos de la Huerta de Aranjuez, siendo los más consumidos el espárrago y el fresón. Un 42% de los encuestados compra producto ecológico por razones de salud, sabor y buscando la ausencia de químicos. • El eslabón de restaurantes es un gran consumidor de hortalizas, la gran mayoría de los productos incluidos en el análisis se oferta en más del 75% de los casos. Las más presentes son tomate y espárrago. La fresa y el fresón (en un 83% de los casos), y el espárrago (72%) seguido de la alcachofa (44%) son los productos de Aranjuez que más se conocen en el conjunto de los restaurantes entrevistados. El 75% de los restaurantes prefiere el producto fresco frente al procesado o congelado. La mayoría de los restaurantes locales (92%) estaría dispuesto a incluir en su carta una diferenciación para los productos de Aranjuez. Sin embargo, en el resto de restaurantes el porcentaje es mucho menor (21%). Entre las conclusiones del análisis se evidenció que un 52% de las ventas de los agricultores se realizaba sin intermediarios y un 69% de los consumidores se manifestaba interesado en adquirir productos de Aranjuez directamente del campo a su casa. Se identificó de esta manera que el acortamiento de la cadena se está utilizando como una forma de crear valor. Para profundizar en este aspecto, se planteó una segunda fase en la investigación. Además de estudiar diversos aspectos de los canales cortos de comercialización, se planteó estudiar el enfoque multifuncional de la horticultura, como estrategia para poner en valor la Huerta ribereña. Para dar una coherencia con la fase anterior, el planteamiento se realizó también desde la perspectiva de la cadena de valor, orientando la consulta hacia el eslabón consumidor. De esta manera, se realizó una consulta mediante cuestionario a 221 consumidores sobre diferentes aspectos relativos a los Canales Cortos de Comercialización (CCC) y la Horticultura Multifuncional (HM)1, lo cual permitió realizar un análisis cuantitativo de diferentes variables. Para completar la visión integral de la cadena corta, se seleccionaron 6 proyectos significativos que son ejemplos de diversas tipologías de canales cortos de comercialización en Aranjuez y Madrid, como representantes del denominado eslabón de “Promotores de CCC” y se consultó también a la Asociación de Productores de la Huerta de Aranjuez, constituida formalmente en el año 2014, como representante del eslabón Productor. Para la obtención de información, la cual tiene un carácter cualitativo en el caso de estos dos eslabones de la cadena, se realizaron cuestionarios y Estudios de Caso de cada proyecto. Los cuestionarios de esta segunda fase de consulta a los eslabones de la cadena corta contuvieron cuestiones relativas a los canales cortos de comercialización, tanto a nivel general (concepto de canal corto, puntos fuertes y ventajas que aportan, dificultades para su desarrollo, factores clave para su éxito) como para el caso concreto de la Huerta de Aranjuez (perfil del consumidor, factores implicados en la compra de verduras, utilización de diversas modalidades de canal corto, relación con las tecnologías de la información y comunicación (TICs) y la producción ecológica o la importancia del factor confianza). También aspectos relacionados con la Horticultura Multifuncional, como son, la valoración de diferentes actividades o proyectos de carácter agro-turístico, educativo, social o terapéutico, o la percepción del consumidor de las actividades de huerta como fuente de bienestar y como agente satisfactor de diversas necesidades humanas. Para completar la visión sobre estos dos temas, CCC y HM, se realizó una consulta mediante cuestionario a Expertos en el campo de los canales cortos de comercialización, procedentes del ámbito académico, y a Profesionales en activo trabajando en proyectos de horticultura social y terapéutica. La información aportada, aunque tiene carácter cualitativo, complementa el estudio ofreciendo la perspectiva académica en el caso de los canales cortos y amplía la información sobre la horticultura multifuncional, tratando cuestiones relativas al desempeño profesional o a la formación existente en España en el campo de la horticultura social y terapéutica. Los resultados de esta segunda fase de la investigación, entre otras cuestiones, evidenciaron que: • Los canales cortos de comercialización implican mucho más que la simple reducción de intermediarios y comprenden una gran diversidad de tipologías. • Los casos estudiados, están enfocados en su mayoría al producto ecológico y su funcionamiento está muy fundamentado en el uso de TICs y en el factor confianza. • En relación a la compra de verduras en el ámbito de los canales cortos, son aspectos muy valorados por el consumidor la calidad del producto, la rapidez y frescura con la que llega del campo a la mesa y que el Producto sea recogido en su punto óptimo de maduración. • Las actividades en el ámbito de la horticultura multifuncional son valoradas positivamente por los consumidores, siendo las más puntuadas las de huerto educativo, huerto terapéutico, seguidas de visitas guiadas y degustaciones de productos de huerta en restaurantes. • Por lo general existe una valoración muy alta de la huerta como fuente de bienestar y de satisfacción de necesidades humanas básicas, especialmente las de una alimentación saludable y de conexión con la naturaleza. Para terminar esta síntesis de la investigación realizada, se presentan las principales conclusiones a nivel global de la Tesis, que son las siguientes: 1. La metodología de cadena de valor ha resultado adecuada para conocer la complejidad y el funcionamiento del sector hortícola arancetano desde una perspectiva integral. 2. La Huerta de Aranjuez cuenta con importantes fortalezas, sustentadas en la calidad de sus suelos y en la fama que mantienen sus productos, pero también debilidades. Esto supone poco volumen de producción, que dificulta la relación con mayoristas y grandes detallistas. 3. El acortamiento de la cadena, mediante canales cortos de comercialización se ha identificado como una forma de creación de valor en la cadena. Existen oportunidades de abastecimiento a consumidores de Madrid mediante canales cortos, sin embargo, las modalidades que requieren mayor organización o requisitos de producción ecológica todavía no están desarrolladas. 4. La producción ecológica podría ser una estrategia para crear valor pero todavía es un método de cultivo muy minoritario en la cadena productiva arancetana. 5. Las peculiaridades de la Huerta de Aranjuez propician la puesta en práctica del enfoque multifuncional de la horticultura como vía de desarrollo económico. Los resultados apuntan a una posible demanda de servicios que contemplen actividades de horticultura de carácter educativo, terapéutico y agro-turístico, conducidas por profesionales. Existe una percepción positiva sobre el potencial de la huerta como fuente de bienestar y de satisfacción de necesidades humanas básicas. 6. La puesta en marcha de proyectos empresariales en el ámbito de la horticultura social es una apuesta interesante para crear valor en la huerta que ha sido valorada positivamente por los eslabones de la cadena corta consultados. 7. El campo de la Horticultura Multifuncional que contempla aspectos educativos, sociales y terapéuticos conforma una disciplina con posibilidades de desarrollo que en la investigación se perciben como limitadas por la falta de profesionales y su acceso a una formación adecuada en España. El estudio de los Canales Cortos de Comercialización y de la Horticultura Multifuncional como vías de puesta en valor en el caso de la Huerta de Aranjuez ha tenido un carácter exploratorio y en gran parte cualitativo en esta Tesis Doctoral. Ambos conceptos han desvelado cierta complejidad y requieren de un mayor conocimiento en diversos aspectos para su puesta en práctica con éxito. Se abre, por tanto, un campo para futuras investigaciones que profundicen en estos ámbitos. ABSTRACT La Vega de Aranjuez has been known for centuries for the reputation of its orchards and historic gardens and, more recently, as the pantry of Madrid. However, in the mid-twentieth century, with the transformations in agriculture, not only locally, but globally, began a process of decline that has been accentuated in recent years. Meanwhile, in 2001, Unesco declared Aranjuez Cultural Landscape, as a World Heritage Site with outstanding universal value. Part of what underpins this international recognition lies in the peculiarities of the landscape created by farming. The shift, from an eminently horticultural vocation to extensive field crops and fallow surfaces, and the loss of importance of the sector, have not gone unnoticed for local authorities and have been several attempts at recovery and revitalization of the sector in recent years. The beginning of this research came at the initiative of the municipality of Aranjuez, which in 2010 wanted to know the situation of the horticultural sector, for which he commissioned a study by the UPM-ETSIA. To know reality from an integral perspective, it was proposed to approach the analysis from the perspective of value chain. The implications of this concept, its evolution and its role as an instrument of analysis of the food chain, have been reviewed and presented in Chapter 3.2. The value chain concept refers to all the processes from the consumer, through suppliers who provide products, services and information that add value to customers (Lambert & Cooper, 2000; Chen, 2004). For the analysis of the situation of the horticultural sector in Aranjuez, which constituted the first phase of research, it proceeded in several steps: 1. Identifying the problems and demands of the actors in the chain, making transverse cuts in the market at different levels to meet the views of the chain operators (Gunasekaran & Patel , 2004; Rojas, 2009; Schiefer, 2007). Questionnaires were designed for it and went to representatives of the five links in the chain: Farmers (15), Wholesalers (11), Retailers (55), Consumers (85) and Restaurants (36), both in Aranjuez and Madrid (a total of 202). 2. SWOT analysis of each chain actor and of the whole supply chain, as a tool to identify and synthesize the problems and potential of the sector. 3. Analysis of the whole supply chain by Industrial Organization Method according to Briz et al. (2010), which allows to study aspects of the structure, conduct and performance of the chain. 4. Analysis by a Panel of Experts at Foro Agrario Foundation headquarters, where the conclusions of the analysis were presented and strategies for the revitalization of the sector were raised. The results of the analysis in this first phase of the research, presented an overview of the value chain. Some of the highlights are: - The productive sector in Aranjuez is very fragmented and usually works independently. With a wide variety of horticultural products (up to 20), fruit crops almost disappearing and little presence of organic product. Is concerned about the unstable and low prices and usually does not work with contracts. - The wholesale sector with virtually no presence in Aranjuez is represented mostly by Mercamadrid operators, who demand higher volumes and better standardization of horticultural products from Aranjuez. - The retailer sector is diversified (with representation from retailers, supermarkets and hypermarkets) and also demand higher production volumes and improved standardization. 80% know the products of Aranjuez, especially asparagus and strawberry-strawberry cited by 74% and 63% of cases respectively. - Among the consumers, 79% give importance to the origin of horticultural products and 82% know the products from Aranjuez, the most consumed asparagus and strawberries. 42% buy organic products for health, taste and absence of chemicals. - Restaurants are big consumers of vegetables, most of the products included in the analysis is offered in over 75% of cases. The most: tomato and asparagus. Strawberry (83% of cases), and asparagus (72%) followed by the artichoke (44%) are the products of Aranjuez more known in all the surveyed restaurants. 75% of the restaurants prefer fresh product against processed or frozen. Most local restaurants (92%) would be willing to include in their menu a differentiation for products of Aranjuez. However, for those restaurants from Madrid the percentage is much lower (21%). Among the conclusions of the analysis it showed that 52% of sales were realized from farmers without intermediaries and 69% of consumers expressed interest in acquiring products directly from field to table. It has been identified that the shortening of the chain is being used as a way to create value. To deepen this aspect, a second phase investigation arose. Besides studying various aspects of the short supply chains, it was also proposed to study the functional approach of horticulture as a strategy to add value. To provide consistency with the previous phase, the focus was also conducted from the perspective of the value chain, directing the query to consumers. Thus, again it was used the questionnaire as a methodological tool, and 221 consumers were asked about different aspects of the Short Suppy Chains (SSC) and Multifunctional Horticulture (MH)2, which allowed a quantitative analysis of several variables. To complete the comprehensive view of the short chain, 6 significant projects were selected as examples of different types of short supply chains in Aranjuez and Madrid, representing "SSC Promoters" and also the “Asociación de Productores de la Huerta de Aranjuez”, formally constituted in 2014, was asked representing the productive sector. The Study Case and again the questionnaire were elected as methodological tools in a qualitative analysis. The questionnaires of this second phase of research contained short supply chain issues, as a general topic (short supply chain concept, strengths and advantages they bring difficulties for its development, key factors success) and also refered to the case of Aranjuez (consumer profile, factors involved in the purchase of vegetables, use of several types of short supply chains, relation with information and communication technologies (ICTs) and organic production or the importance of trust in short supply chains). It also contemplated aspects of multifunctional horticulture, such as the valuation of different activities (agro-tourism, educational, social or therapeutic horticulture) and consumer perception about horticultural activities as a source of welfare and satisfactor of human needs. To complete the vision of these two issues, SSC and MH, experts in the field of short supply chains and professionals working in the field of social and therapeutic horticulture were asked. The qualitative information provided, complements the study offering a new perspective in the value chain analysis, such as those relating to job performance, the difficulties encountered or training existing in our country in the field of social and therapeutic horticulture. The results of this second phase of research showed that: Short supply chains involve much more than simply reducing intermediaries and cover a wide range of types. The cases studied are mostly focused on ecological product and its operation is heavily based on the use of ICTs and the trust factor. In connection with the purchase of vegetables in the field of short supply chains, product quality, speed and freshness with which comes from the field to the table and products picked at its peak maturation, are aspects highly valued by the consumer. Activities in the field of multifunctional horticulture are positively valued by consumers, the most scored: the educational garden, therapeutic garden, followed by guided tours and tastings of vegetables from Aranjuez in restaurants. Horticultural activities were highly valuated as a source of welfare and satisfaction of human needs, especially those of healthy eating and connection with nature. To complete this summary, the main conclusions of the research are presented as follows: 1. The value chain approach has been adequate to meet the complexity and operation of the horticultural sector in Aranjuez from a holistic perspective. 2. La Huerta de Aranjuez has important strengths, underpinned by the quality of its soils and fame that keep their products, but also weaknesses. This implies low volume of production, which makes difficult the link with wholesalers and large retailers. 3. The shortening of the chain by short supply chains has been identified as a way of creating value in the chain. Opportunities exist to supply consumers from Madrid by short supply chains, however, methods that require greater organization or requirements of organic production are not yet developed. 4. Organic production could be a strategy to create value but is not generally being implemented in the production chain. 5. The peculiarity of the Huerta de Aranjuez favours the implementation of the multifunctional approach as a means of economic development. The results point to a possible demand for multifunctional horticulture that include educational, therapeutic and agro-tourism activities. There is a positive perception of the potential of horticultural activities as a source of welfare and satisfaction of basic human needs. 6. The implementation of business projects in the field of social horticulture are an interesting way to create value that has been highly valued in the short supply chain. 7. The field of Multifunctional Horticulture which includes educational, social and therapeutic aspects, forms a discipline with possibilities of development, which in research are seen as limited by the lack of professionals and access to adequate training in our country. The study of Short Supply Chains and Multifunctional Horticulture as strategies to create value in the case of the Huerta de Aranjuez has an exploratory character and largely qualitative in this research. Both concepts have revealed some complexity and require greater knowledge in various aspects for successful implementation. It opens therefore a field for future research to deepen in these areas.

Gay Couples Who Adopt Children Who Have Been Abused: Ideas and Interventions From a Self Psychological Perspective to Facilitate the Adoption Process

here are currently hundreds of thousands of children in the US foster care system who are all in need of a stable and predictable home with parents on whom they can depend. Recently, there has been an increased interest in adoption from gay couples who want to start a family. Because the majority of children in the foster care system have some sort of abuse or neglect history, a large number of them present with difficulties such as oppositional behavior, mood dysregulation, and other kinds of mental health problems. This paper addresses the unique situation of gay couples who adopt children who have been abused. Kohut's self psychology theory is utilized to help identify strengths and potential problems that could arise from this type of situation. Particular attention is given to the three selfobject needs that are central in self psychology: mirroring, idealization, and twinship. Additionally, ideas for interventions are posed for potential adoptive parents and mental health professionals to use to help the adoption process progress more smoothly and to hopefully lead to long-term, healthy placements.

Development of a Strengths-Based Model for Insurance Automobile, Property, and Casualty Claims Operations

ABSTRACT \ Employers know that to have a successful organization, they must have the right people in the right jobs. But how will they know whom to place where? The development of a model based upon an individual's personality traits and strengths, and how to best use them, is a good place to start. Employees working in positions in which their traits and strengths are maximized enjoy work more, are more efficient, and are less apt to be absent or to look for work elsewhere. It is a mutually beneficial process of selection for both employers and employees. This model illustrates the process in an automobile and property insurance claims operation through utilization of the Myers-Briggs Type Indicators and the StrengthsFinder Profiles.

Teamwork in Health and Rehabilitation Sciences: Evaluation of a multiprofessional workshop

This paper outlines a multiprofessional education workshop piloted and subsequently conducted with a cohort of 81 graduate entry students of occupational therapy, physiotherapy, speech pathology and audiology. The rationale for, and format of, the workshop is outlined, followed by comparisons between students' knowledge about teamwork prior to and after the four-hour workshop. The workshop was based on a real case scenario of a child with Developmental Coordination Disorder (DCD). Students completed pre- and post-workshop questionnaires about their knowledge of DCD, teamwork and the roles of various professionals and parents; and a post-workshop questionnaire about their views regarding the utility of the workshop, its strengths, and learning outcomes. The evaluation indicated that the workshop was overwhelmingly successful from the students' perspective in: (1) enhancing their understanding about DCD and its multifaceted impact on school age children; (2) developing a deeper appreciation of the importance of teamwork itself; (3) refining their understanding of their own profession's role and (4) developing an appreciation of the role of other professions and parents in working with children with complex needs, and their families. Limitations of this study and directions for future research are discussed.

A survey of continuous improvement practices in the United Kingdom and Mexico

With the advent of globalisation companies all around the world must improve their performance in order to survive. The threats are coming from everywhere, and in different ways, such as low cost products, high quality products, new technologies, and new products. Different companies in different countries are using various techniques and using quality criteria items to strive for excellence. Continuous improvement techniques are used to enable companies to improve their operations. Therefore, companies are using techniques such as TQM, Kaizen, Six-Sigma, Lean Manufacturing, and quality award criteria items such as Customer Focus, Human Resources, Information & Analysis, and Process Management. The purpose of this paper is to compare the use of these techniques and criteria items in two countries, Mexico and the United Kingdom, which differ in culture and industrial structure. In terms of the use of continuous improvement tools and techniques, Mexico formally started to deal with continuous improvement by creating its National Quality Award soon after the Americans began the Malcolm Baldrige National Quality Award. The United Kingdom formally started by using the European Quality Award (EQA), modified and renamed as the EFQM Excellence Model. The methodology used in this study was to undertake a literature review of the subject matter and to study some general applications around the world. A questionnaire survey was then designed and a survey undertaken based on the same scale, about the same sample size, and the about the same industrial sector within the two countries. The survey presents a brief definition of each of the constructs to facilitate understanding of the questions. The analysis of the data was then conducted with the assistance of a statistical software package. The survey results indicate both similarities and differences in the strengths and weaknesses of the companies in the two countries. One outcome of the analysis is that it enables the companies to use the results to benchmark themselves and thus act to reinforce their strengths and to reduce their weaknesses.

Teaching and learning German language and culture in higher education in Britain:problems, challenges and didactical implications. A case study

The aim of this thesis is to explore key aspects and problems of the institutionalised teaching and learning of German language and culture in the context of German Studies in British Higher Education (HE). This investigation focuses on teaching and learning experiences in one department of German Studies in the UK, which is the micro-context of the present study, in order to provide an in-depth insight into real-life problems, strengths and weaknesses as they occur in the practice of teaching and learning German. Following Lamb (2004) and Holliday (1994), the present study acts on the assumption that each micro-context does not exist in vacuo but is always embedded in a wider socio-political and education environment, namely the macro-context, which largely determines how and what is taught. The macro-analysis of the present study surveys the socio-political developments that have recently affected the sector of modern languages and specifically the discipline of German Studies in the UK. It demonstrates the impact they have had on teaching and learning German at the undergraduate level in Britain. This context is interesting inasmuch as the situation in Britain is to a large extent a paradigmatic example of the developments in German Studies in English-speaking countries. Subsequently, the present study explores learning experiences of a group of thirty-five first year students. It focuses on their previous experiences in learning German, exposure to the target language, motivation, learning strategies and difficulties encountered, when learning German at the tertiary level. Then, on the basis of interviews with five lecturers of German, teaching experience in the context under study is explored, problems and successful teaching strategies discussed.

Características dos programas de residência médica em cardiologia do estado do Rio Grande do Norte

The present study had as goal to evaluate Rio Grande do Norte state’s medical residency programs (MRP) in Cardiology. It’s a descriptive study, including a documental analysis of the program’s accreditation processes (PAP) of cardiology’s medical residency in Rio Grande do Norte state in 2014 and the analysis of the resident’s perception about his professional education as a specialist in Cardiology. Beside the documental analysis of the PAPs, it was applied a semi-structured questionnaire with closed questions Likert style and open questions to all the current and former residents of the MRPs analyzed. Two MRPs in Cardiology were identified in Rio Grande do Norte state, one hosted in a public institution and the other in a private institution. The documental analysis showed a greater amount of preceptors with a good level of ownership on the public institution in comparison with the private one, as well as a bigger number of publications, participation in congresses and in book’s publications. The private institution presents a better Urgency’s infrastructure, with emergency room and cardiologic ICU. It IS clear that the residents are aware of how a good residency must work, as well as the strengths and fragilities of their own residences. Most of Onofre Lopes Universitary Hospital’s residents point out as a strength the organization, participation and quality of the preceptors, practice activities and scientific debates, great amount of patients and the visits and debates with the preceptors on the sickrooms. As the greatest fragilities, they emphasize the lack of a urgency service of their own and a specialized ICU. In Coração Hospital of Natal (HCor), it is listed as weak points the theoretic scheduling and the few ambulatory practices. As positive aspects, they report the preceptors, the agility on the execution of exams, a good number of serious patients and procedures. In both residences, it is seen a certain difficulty in accepting the important and mandatory items imposed by the rules of the Medical Residences’ National Committee, such as: biostatistics, bioethics, medical ethic, epidemiology and research methodology. Besides that, the residents recognize that both hospitals have a good infrastructure and technological support, especially in imaging methods. The evaluation of PRMCs identifies the strengths of each program and the aspects to be improved in both programs. It also allowed the observation of difficulties in accepting some regulations contained in the CNRM resolution by the resident, such as participation in activities such as biostatistics, epidemiology and research methodology as well as the improvement needs of specific technical training, such as in emergency care. Thus, our results make possible to develop strategies for continued improvement of PRMC in RN state. In addition, it enabled the preparation of the resident’s manual in cardiology, containing even a breakdown of resident evaluation system, which could serve as a model for other residency programs.

Secure and Scalable Statistical Computation of Questionnaire Data in R

Collecting data via a questionnaire and analyzing them while preserving respondents’ privacy may increase the number of respondents and the truthfulness of their responses. It may also reduce the systematic differences between respondents and non-respondents. In this paper, we propose a privacy-preserving method for collecting and analyzing survey responses using secure multi-party computation (SMC). The method is secure under the semi-honest adversarial model. The proposed method computes a wide variety of statistics. Total and stratified statistical counts are computed using the secure protocols developed in this paper. Then, additional statistics, such as a contingency table, a chi-square test, an odds ratio, and logistic regression, are computed within the R statistical environment using the statistical counts as building blocks. The method was evaluated on a questionnaire dataset of 3,158 respondents sampled for a medical study and simulated questionnaire datasets of up to 50,000 respondents. The computation time for the statistical analyses linearly scales as the number of respondents increases. The results show that the method is efficient and scalable for practical use. It can also be used for other applications in which categorical data are collected.

Self-regulatory behaviours and flow dispositions in musical practice: a survey with advanced performers

Flow experience, a holistic sensation of total involvement in an activity, seems to have positive influences on musical performance activities. Although its main requirements (balance between challenges and skills, clear goals and unequivocal feedback) are inherent elements of musical practice, there is a lack of research about flow occurrences in the context of musical practice and on how specific practice behaviours affect the experience of flow and its particular dimensions. The aims of this thesis were to investigate advanced performersʼ dispositions to flow in musical practice, and to investigate whether the frequency of these experiences of holistic engagement with practice are associated with self-regulatory practice behaviours. 168 advanced classicallytrained performers (male = 50.0%; female = 50.0%), ranging in age from 18 to 74 years (m = 34.41, SD = 12.39), answered a survey that included two measures: the Dispositional Short Flow Scale, assessing performersʼ flow dispositions, and the Self-Regulated Practice Behaviours Questionnaire, developed specifically for the present research. The overall results of the survey suggested that advanced musicians have high dispositions to flow in musical practice, but not associated with the participantsʼ demographic characteristics. Three of the individual flow indicators were less experienced, suggesting that the most intense flow experiences are rare in musical practice. However, the results point to the existence of another relevant experience, named optimal practice experience. Practice engagement levels were positively associated with knowledge of oneʼs own personal resources and a capacity for practice organization, but not with inclusion/use of external resources. A capacity for setting optimal practice goals was related to self-regulation and to immersion aspects of flow. Current findings offer new clues about the assessment of flow dispositions in performers, helping to clarify how daily practice can heighten positive affective responses in musicians who are vulnerable to the requirements and difficulties of deliberate practice, as well as to other negative practice outcomes. The current research questions issues pertaining to the optimization and sustaining of flow in daily practice, suggesting future directions in the study of the affective subjective functioning of engagement with deliberate practice.

The use of Acceptance and Commitment Therapy to address psychological distress experienced by caregivers: a randomised controlled feasibility trial

Background: An extensive research literature has documented the impact of caring for an individual with acquired brain injury (ABI) on caregivers and family members, including role adjustment, psychological distress, social isolation, family tension and coping with the cognitive and behavioural difficulties of the injured person. Given these findings it is important this population have access to services and supports. Acceptance and Commitment Therapy (ACT) is an intervention that helps individuals to accept difficult experiences and commit to behaviour that is consistent with their values. Research into the effectiveness of ACT to support caregivers is at a preliminary stage. Aim: To investigate the feasibility of using ACT to reduce psychological distress and increase psychological flexibility in ABI caregivers. A secondary aim was to gain an understanding of the experience of caregivers in this context and how this can inform the development and delivery of interventions for this population. Method: Phase one was a randomised controlled feasibility trial of an ACT intervention for use with ABI caregivers. The parameters of this study were formulated around the PICO (population, intervention, control, and outcome) framework. Eighteen carers were recruited and randomised to ACT or an enhanced treatment as usual (ETAU) group. ACT was implemented over 3 sessions; and ETAU was implemented over 2 sessions. The General Health Questionnaire, Valuing Questionnaire, Acceptance and Action Questionnaire, Experiential Avoidance of Caregiving Questionnaire and the Flexibility of Responses to Self-Critical Thoughts Scale were administered to both groups at baseline and following the final session. Phase two used a retrospective qualitative design that involved conducting semi-structured interviews with four participants from phase one. Results: ACT and control participants were successfully recruited. Positive feedback was obtained from ACT participants suggesting that the intervention was acceptable. There were no significant differences between the ACT and ETAU groups on outcome measures. However, there were challenges retaining participants and the overall attrition rate was high (44.44%). Therefore a number of participants did not complete the full complement of sessions, which may have impacted on this result. Qualitative results illustrated the challenges this population face including significant adjustments in their life, the emotional impact of having a loved one with a brain injury and trying to adapt to the changes in the injured person. In addition, findings elucidated the types of support that this population would find helpful and the barriers to accessing same. Conclusions: Findings from this study highlight factors that will help the development of this intervention further for a caring population. Recommendations for future implementation include completing some preparatory work with carers before beginning the intervention, consideration of a larger sample and wider recruitment strategy from local services, barriers to attending interventions and the possibility of holding groups in local venues.

School Anxiety Inventory: Reliability and Validity Evidence in a Sample of Slovenian Adolescents

The purpose of this study was to examine the reliability and validity of the School Anxiety Inventory (SAI) using a sample of 646 Slovenian adolescents (48% boys), ranging in age from 12 to 19 years. Single confirmatory factor analyses replicated the correlated four-factor structure of scores on the SAI for anxiety-provoking school situations (Anxiety about School Failure and Punishment, Anxiety about Aggression, Anxiety about Social Evaluation, and Anxiety about Academic Evaluation), and the three-factor structure of the anxiety response systems (Physiological Anxiety, Cognitive Anxiety, and Behavioral Anxiety). Equality of factor structures was compared using multigroup confirmatory factor analyses. Measurement invariance for the four- and three-factor models was obtained across gender and school-level samples. The scores of the instrument showed high internal reliability and adequate test–retest reliability. The concurrent validity of the SAI scores was also examined through its relationship with the Social Anxiety Scale for Adolescents (SASA) scores and the Questionnaire about Interpersonal Difficulties for Adolescents (QIDA) scores. Correlations of the SAI scores with scores on the SASA and the QIDA were of low to moderate effect sizes.

COMPARATIVE ANALYSIS OF EFFICIENCY AND OPERATING CHARACTERISTICS OF AUTOMOTIVE POWERTRAIN ARCHITECTURES THROUGH CHASSIS DYNAMOMETER TESTING

The thesis "COMPARATIVE ANALYSIS OF EFFICIENCY AND OPERATING CHARACTERISTICS OF AUTOMOTIVE POWERTRAIN ARCHITECTURES THROUGH CHASSIS DYNAMOMETER TESTING" was completed through a collaborative partnership between Michigan Technological University and Argonne National Laboratory under a contractual agreement titled "Advanced Vehicle Characterization at Argonne National Laboratory". The goal of this project was to investigate, understand and document the performance and operational strategy of several modern passenger vehicles of various architectures. The vehicles were chosen to represent several popular engine and transmission architectures and were instrumented to allow for data collection to facilitate comparative analysis. In order to ensure repeatability and reliability during testing, each vehicle was tested over a series of identical drive cycles in a controlled environment utilizing a vehicle chassis dynamometer. Where possible, instrumentation was preserved between vehicles to ensure robust data collection. The efficiency and fuel economy performance of the vehicles was studied. In addition, the powertrain utilization strategies, significant energy loss sources, tailpipe emissions, combustion characteristics, and cold start behavior were also explored in detail. It was concluded that each vehicle realizes different strengths and suffers from different limitations in the course of their attempts to maximize efficiency and fuel economy. In addition, it was observed that each vehicle regardless of architecture exhibits significant energy losses and difficulties in cold start operation that can be further improved with advancing technology. It is clear that advanced engine technologies and driveline technologies are complimentary aspects of vehicle design that must be utilized together for best efficiency improvements. Finally, it was concluded that advanced technology vehicles do not come without associated cost; the complexity of the powertrains and lifecycle costs must be considered to understand the full impact of advanced vehicle technology.

Mobility and satisfaction with lower-limb prostheses and orthoses among users in Sierra Leone: A cross-sectional study

Objectives: To investigate patients' mobility and satisfaction with their lower-limb prosthetic or orthotic device and related service delivery in Sierra Leone; to compare groups of patients regarding type and level of assistive device, gender, area of residence, income; and to identify factors associated with satisfaction with the assistive device and service. Methods: A total of 139 patients answered questionnaires, including the Quebec User Evaluation of Satisfaction with Assistive Technology questionnaire (QUEST 2.0). Results: Eighty-six percent of assistive devices were in use, but half needed repair. Thirty-three percent of patients reported pain when using their assistive device. Patients had difficulties or could not walk at all on: uneven ground (65%); hills (75%); and stairs (66%). Patients were quite satisfied with their assistive device and the service (mean 3.7 out of 5 in QUEST), but reported 886 problems. Approximately half of the patients could not access services. In relation to mobility and service delivery, women, orthotic patients and patients using above-knee assistive devices had the poorest results. The general condition of the assistive device and patients' ability to walk on uneven ground were associated with satisfaction with the assistive devices and service. Conclusion: Patients reported high levels of mobility while using their device although they experienced pain and difficulties walking on challenging surfaces. Limitations in the effectiveness of assistive devices and limited access to follow-up services and repairs were issues desired to be addressed.

Revisiting the conceptualization and measurement of service quality

Since the 1980s, industries and researchers have sought to better understand the quality of services due to the rise in their importance (Brogowicz, Delene and Lyth 1990). More recent developments with online services, coupled with growing recognition of service quality (SQ) as a key contributor to national economies and as an increasingly important competitive differentiator, amplify the need to revisit our understanding of SQ and its measurement. Although ‘SQ’ can be broadly defined as “a global overarching judgment or attitude relating to the overall excellence or superiority of a service” (Parasuraman, Berry and Zeithaml 1988), the term has many interpretations. There has been considerable progress on how to measure SQ perceptions, but little consensus has been achieved on what should be measured. There is agreement that SQ is multi-dimensional, but little agreement as to the nature or content of these dimensions (Brady and Cronin 2001). For example, within the banking sector, there exist multiple SQ models, each consisting of varying dimensions. The existence of multiple conceptions and the lack of a unifying theory bring the credibility of existing conceptions into question, and beg the question of whether it is possible at some higher level to define SQ broadly such that it spans all service types and industries. This research aims to explore the viability of a universal conception of SQ, primarily through a careful re-visitation of the services and SQ literature. The study analyses the strengths and weaknesses of the highly regarded and widely used global SQ model (SERVQUAL) which reflects a single-level approach to SQ measurement. The SERVQUAL model states that customers evaluate SQ (of each service encounter) based on five dimensions namely reliability, assurance, tangibles, empathy and responsibility. SERVQUAL, however, failed to address what needs to be reliable, assured, tangible, empathetic and responsible. This research also addresses a more recent global SQ model from Brady and Cronin (2001); the B&C (2001) model, that has potential to be the successor of SERVQUAL in that it encompasses other global SQ models and addresses the ‘what’ questions that SERVQUAL didn’t. The B&C (2001) model conceives SQ as being multidimensional and multi-level; this hierarchical approach to SQ measurement better reflecting human perceptions. In-line with the initial intention of SERVQUAL, which was developed to be generalizable across industries and service types, this research aims to develop a conceptual understanding of SQ, via literature and reflection, that encompasses the content/nature of factors related to SQ; and addresses the benefits and weaknesses of various SQ measurement approaches (i.e. disconfirmation versus perceptions-only). Such understanding of SQ seeks to transcend industries and service types with the intention of extending our knowledge of SQ and assisting practitioners in understanding and evaluating SQ. The candidate’s research has been conducted within, and seeks to contribute to, the ‘IS-Impact’ research track of the IT Professional Services (ITPS) Research Program at QUT. The vision of the track is “to develop the most widely employed model for benchmarking Information Systems in organizations for the joint benefit of research and practice.” The ‘IS-Impact’ research track has developed an Information Systems (IS) success measurement model, the IS-Impact Model (Gable, Sedera and Chan 2008), which seeks to fulfill the track’s vision. Results of this study will help future researchers in the ‘IS-Impact’ research track address questions such as: • Is SQ an antecedent or consequence of the IS-Impact model or both? • Has SQ already been addressed by existing measures of the IS-Impact model? • Is SQ a separate, new dimension of the IS-Impact model? • Is SQ an alternative conception of the IS? Results from the candidate’s research suggest that SQ dimensions can be classified at a higher level which is encompassed by the B&C (2001) model’s 3 primary dimensions (interaction, physical environment and outcome). The candidate also notes that it might be viable to re-word the ‘physical environment quality’ primary dimension to ‘environment quality’ so as to better encompass both physical and virtual scenarios (E.g: web sites). The candidate does not rule out the global feasibility of the B&C (2001) model’s nine sub-dimensions, however, acknowledges that more work has to be done to better define the sub-dimensions. The candidate observes that the ‘expertise’, ‘design’ and ‘valence’ sub-dimensions are supportive representations of the ‘interaction’, physical environment’ and ‘outcome’ primary dimensions respectively. The latter statement suggests that customers evaluate each primary dimension (or each higher level of SQ classification) namely ‘interaction’, physical environment’ and ‘outcome’ based on the ‘expertise’, ‘design’ and ‘valence’ sub-dimensions respectively. The ability to classify SQ dimensions at a higher level coupled with support for the measures that make up this higher level, leads the candidate to propose the B&C (2001) model as a unifying theory that acts as a starting point to measuring SQ and the SQ of IS. The candidate also notes, in parallel with the continuing validation and generalization of the IS-Impact model, that there is value in alternatively conceptualizing the IS as a ‘service’ and ultimately triangulating measures of IS SQ with the IS-Impact model. These further efforts are beyond the scope of the candidate’s study. Results from the candidate’s research also suggest that both the disconfirmation and perceptions-only approaches have their merits and the choice of approach would depend on the objective(s) of the study. Should the objective(s) be an overall evaluation of SQ, the perceptions-only approached is more appropriate as this approach is more straightforward and reduces administrative overheads in the process. However, should the objective(s) be to identify SQ gaps (shortfalls), the (measured) disconfirmation approach is more appropriate as this approach has the ability to identify areas that need improvement.