Heat and mass transfer in two-phase porous materials under intensive microwave heating

Computational results for the intensive microwave heating of porous materials are presented in this work. A multi-phase porous media model has been developed to predict the heating mechanism. Combined finite difference time-domain and finite volume methods were used to solve equations that describe the electromagnetic field and heat and mass transfer in porous media. The coupling between the two schemes is through a change in dielectric properties which were assumed to be dependent both on temperature and moisture content. The model was able to reflect the evolution of both temperature and moisture fields as well as energy penetration as the moisture in the porous medium evaporates. Moisture movement results from internal pressure gradients produced by the internal heating and phase change.

Measurements of temperature dynamics of ions trapped inside an electron beam ion trap and evidence for ionisation heating

A technique is described whereby measurements of ions extracted from an electron beam ion trap can be used to deduce their temperature dynamics. The measured temperature dynamics shows the expected trend as a function of charge and also gives evidence for Landau-Spitzer heating, ionization heating and evaporative cooling.

Integrating field sports, hare population management and conservation

Conflicts between field sports, animal welfare and species conservation are frequently contentious. In Ireland, the Irish Coursing Club (ICC) competitively tests the speed and agility of two greyhounds by using a live hare as a lure. Each coursing club is associated with a number of discrete localities, known as preserves, which are managed favourably for hares including predator control, prohibition of other forms of hunting such as shooting and poaching and the maintenance and enhancement of suitable hare habitat. We indirectly tested the efficacy of such management by comparing hare abundance within preserves to that in the wider countryside. In real terms, mean hare density was 18 times higher, and after controlling for variance in habitat remained 3 times higher, within ICC preserves than the wider countryside. Whilst we cannot rule out the role of habitat, our results suggest that hare numbers are maintained at high levels in ICC preserves either because clubs select areas of high hare density and subsequently have a negligible effect on numbers or that active population management positively increases hare abundance. The Irish hare Lepus timidus hibernicus Bell, 1837 is one of the highest priority species for conservation action in Ireland and without concessions for its role in conservation, any change in the legal status Of hare coursing under animal welfare grounds, may necessitate an increase in Government subsidies for conservation on private land together with a strengthened capacity for legislation enforcement.

Hydrothermal synthesis of a continuous zeolite Beta layer by optimization of time, temperature and heating rate of the precursor mixture

Highly crystalline zeolite Beta coatings in a range of Si/Al ratios of 12-23 were synthesized on a surface-modified molybdenum substrate by hydrothermal synthesis. The average thickness of the coatings was ca. 2 mu m corresponding to a coverage of 2.5 gm(-2). The coatings were obtained from a viscous Na, K, and TEAOH containing aluminosilicate precursor mixture with silica sol as reactive silicon source. A mechanism for the in situ growth of zeolite Beta coatings is proposed. According to this mechanism, the deposition of an amorphous gel layer on the substrate surface in the initial stage of the synthesis is an important step for the crystallization of continuous zeolite Beta coatings. The heating rate of the precursor mixture and the synthesis temperature were optimized to control the level of supersaturation and to stimulate the initial formation of a gel layer. At a Si/Al ratio of 23, fast heating and a temperature of 150 degrees C are required to obtain high coverage, while at a Si/Al ratio of 15, hydrothermal synthesis has to be performed with a slow initial heating rate at 140 degrees C. (c) 2007 Elsevier Inc. All rights reserved.

Automated versus non-automated weaning for reducing the duration of mechanical ventilation for critically ill adults and children: a cochrane systematic review and meta-analysis

IntroductionAutomated weaning systems may improve adaptation of mechanical support for a patient’s ventilatory needs and facilitate systematic and early recognition of their ability to breathe spontaneously and the potential for discontinuation of ventilation. Our objective was to compare mechanical ventilator weaning duration for critically ill adults and children when managed with automated systems versus non-automated strategies. Secondary objectives were to determine differences in duration of ventilation, intensive care unit (ICU) and hospital length of stay (LOS), mortality, and adverse events.MethodsElectronic databases were searched to 30 September 2013 without language restrictions. We also searched conference proceedings; trial registration websites; and article reference lists. Two authors independently extracted data and assessed risk of bias. We combined data using random-effects modelling.ResultsWe identified 21 eligible trials totalling 1,676 participants. Pooled data from 16 trials indicated that automated systems reduced the geometric mean weaning duration by 30% (95% confidence interval (CI) 13% to 45%), with substantial heterogeneity (I2 = 87%, P <0.00001). Reduced weaning duration was found with mixed or medical ICU populations (42%, 95% CI 10% to 63%) and Smartcare/PS™ (28%, 95% CI 7% to 49%) but not with surgical populations or using other systems. Automated systems reduced ventilation duration with no heterogeneity (10%, 95% CI 3% to 16%) and ICU LOS (8%, 95% CI 0% to 15%). There was no strong evidence of effect on mortality, hospital LOS, reintubation, self-extubation and non-invasive ventilation following extubation. Automated systems reduced prolonged mechanical ventilation and tracheostomy. Overall quality of evidence was high.ConclusionsAutomated systems may reduce weaning and ventilation duration and ICU stay. Due to substantial trial heterogeneity an adequately powered, high quality, multi-centre randomized controlled trial is needed.

Ventilation rates in schools and pupil’s performance using computerized assessment tests

Research shows that poor indoor air quality (IAQ) in school buildings can cause a reduction in the students’ performance assessed by short-term computer-based tests; whereas good air quality in classrooms can enhance children's concentration and also teachers’ productivity. Investigation of air quality in classrooms helps us to characterise pollutant levels and implement corrective measures. Outdoor pollution, ventilation equipment, furnishings, and human activities affect IAQ. In school classrooms, the occupancy density is high (1.8–2.4 m2/person) compared to offices (10 m2/person). Ventilation systems expend energy and there is a trend to save energy by reducing ventilation rates. We need to establish the minimum acceptable level of fresh air required for the health of the occupants. This paper describes a project, which will aim to investigate the effect of IAQ and ventilation rates on pupils’ performance and health using psychological tests. The aim is to recommend suitable ventilation rates for classrooms and examine the suitability of the air quality guidelines for classrooms. The air quality, ventilation rates and pupils’ performance in classrooms will be evaluated in parallel measurements. In addition, Visual Analogue Scales will be used to assess subjective perception of the classroom environment and SBS symptoms. Pupil performance will be measured with Computerised Assessment Tests (CAT), and Pen and Paper Performance Tasks while physical parameters of the classroom environment will be recorded using an advanced data logging system. A total number of 20 primary schools in the Reading area are expected to participate in the present investigation, and the pupils participating in this study will be within the age group of 9–11 years. On completion of the project, based on the overall data recommendations for suitable ventilation rates for schools will be formulated.

Evaluation of dichroic material for enhancing light pipe/natural ventilation and daylighting in an integrated system

Integration of natural ventilation and daylighting in a single installation would make both technologies more attractive. One method for the integration is the use of concentric light pipe and ventilation stack. By constructing the light pipe using dichroic materials, the infrared part of the solar radiation is allowed to be transmitted to the stack but the visible light is guided by the light pipe into a room. The heat gain to the interior can be reduced and the thermal stack effect strengthened. Work presented here involved the experimental and computational evaluation of dichroic materials for enhancing both natural stack ventilation and daylighting. The transmittance of a dichroic light pipe was found to be similar to that of a light pipe with a 95% specular reflectance. The infra-red radiation transmitted through the dichroic material into a passive stack was found to enhance the natural ventilation flow by up to 14%. The effect is greater in summer than in winter, which is highly desirable as there is often a lack of driving force for natural stack ventilation in summer.

A review of the performance of different ventilation and airflow distribution systems in buildings

The objective of this article is to review the scientific literature on airflow distribution systems and ventilation effectiveness to identify and assess the most suitable room air distribution methods for various spaces. In this study, different ventilation systems are classified according to specific requirements and assessment procedures. This study shows that eight ventilation methods have been employed in the built environment for different purposes and tasks. The investigation shows that numerous studies have been carried out on ventilation effectiveness but few studies have been done regarding other aspects of air distribution. Amongst existing types of ventilation systems, the performance of each ventilation methods varies from one case to another due to different usages of the ventilation system in a room and the different assessment indices used. This review shows that the assessment of ventilation effectiveness or efficiency should be determined according to each task of the ventilation system, such as removal of heat, removal of pollutant, supply fresh air to the breathing zone or protecting the occupant from cross infection. The analysis results form a basic framework regarding the application of airflow distribution for the benefit of designers, architects, engineers, installers and building owners.

Steel Sheet Applications and Integrated Heat Management

Increasing energy use has caused many environmental problems including global warming. Energy use is growing rapidly in developing countries and surprisingly a remarkable portion of it is associated with consumed energy to keep the temperature comfortable inside the buildings. Therefore, identifying renewable technologies for cooling and heating is essential. This study introduced applications of steel sheets integrated into the buildings to save energy based on existing technologies. In addition, the proposed application was found to have a considerable chance of market success. Also, satisfying energy needs for space heating and cooling in a single room by using one of the selected applications in different Köppen climate classes was investigated to estimate which climates have a proper potential for benefiting from the application. This study included three independent parts and the results related to each part have been used in the next part. The first part recognizes six different technologies through literature review including Cool Roof, Solar Chimney, Steel Cladding of Building, Night Radiative Cooling, Elastomer Metal Absorber, and Solar Distillation. The second part evaluated the application of different technologies by gathering the experts’ ideas via performing a Delphi method. The results showed that the Solar Chimney has a proper chance for the market. The third part simulated both a solar chimney and a solar chimney with evaporation which were connected to a single well insulated room with a considerable thermal mass. The combination was simulated as a system to estimate the possibility of satisfying cooling needs and heating needs in different climate classes. A Trombe-wall was selected as a sample design for the Solar Chimney and was simulated in different climates. The results implied that the solar chimney had the capability of reducing the cooling needs more than 25% in all of the studied locations and 100% in some locations with dry or temperate climate such as Mashhad, Madrid, and Istanbul. It was also observed that the heating needs were satisfied more than 50% in all of the studied locations, even for the continental climate such as Stockholm and 100% in most locations with a dry climate. Therefore, the Solar Chimney reduces energy use, saves environment resources, and it is a cost effective application. Furthermore, it saves the equipment costs in many locations. All the results mentioned above make the solar chimney a very practical and attractive tool for a wide range of climates.

Comparison between intermittent mandatory ventilation and synchronized intermittent mandatory ventilation with pressure support in children

Objective: To compare intermittent mandatory ventilation (IMV) with synchronized intermittent mandatory ventilation plus pressure support (SIMV+PS) in terms of time on mechanical ventilation, duration of weaning and length of stay in a pediatric intensive care unit (PICU).Methods: This was a randomized clinical trial that enrolled children aged 28 days to 4 years who were admitted to a PICU between October of 2005 and June of 2007 and put on mechanical ventilation (MV) for more than 48 hours. These patients were allocated to one of two groups by drawing lots: IMV group (IMVG; n = 35) and SIMV+PS group (SIMVG; n = 35). Children were excluded if they had undergone tracheotomy or had chronic respiratory diseases. Data on oxygenation and ventilation were recorded at admission and at the start of weaning.Results: There were no statistical differences between the groups in terms of age, sex, indication for MV, PRISM score, Comfort scale, use of sedatives or ventilation and oxygenation parameters. The median time on MV was 5 days for both groups (p = 0.120). There were also no statistical differences between the two groups for duration of weaning [IMVG: 1 day (1-6) vs. SIMVG: 1 day (1-6); p = 0.262] or length of hospital stay [IMVG: 8 days (2-22) vs. SIMVG: 6 days (3-20); p = 0.113].Conclusion: Among the children studied here, there was no statistically significant difference between IMV and SIMV+ PS in terms of time on MV, duration of weaning or time spent in the PICU.ClinicalTrials.govID: NCT00549809.

Measurement of ventilation and cardiac related impedance changes with electrical impedance tomography

Introduction Electrical impedance tomography (EIT) has been shown to be able to distinguish both ventilation and perfusion. With adequate filtering the regional distributions of both ventilation and perfusion and their relationships could be analysed. Several methods of separation have been suggested previously, including breath holding, electrocardiograph (ECG) gating and frequency filtering. Many of these methods require interventions inappropriate in a clinical setting. This study therefore aims to extend a previously reported frequency filtering technique to a spontaneously breathing cohort and assess the regional distributions of ventilation and perfusion and their relationship. Methods Ten healthy adults were measured during a breath hold and while spontaneously breathing in supine, prone, left and right lateral positions. EIT data were analysed with and without filtering at the respiratory and heart rate. Profiles of ventilation, perfusion and ventilation/perfusion related impedance change were generated and regions of ventilation and pulmonary perfusion were identified and compared. Results Analysis of the filtration technique demonstrated its ability to separate the ventilation and cardiac related impedance signals without negative impact. It was, therefore, deemed suitable for use in this spontaneously breathing cohort. Regional distributions of ventilation, perfusion and the combined ΔZV/ΔZQ were calculated along the gravity axis and anatomically in each position. Along the gravity axis, gravity dependence was seen only in the lateral positions in ventilation distribution, with the dependent lung being better ventilated regardless of position. This gravity dependence was not seen in perfusion. When looking anatomically, differences were only apparent in the lateral positions. The lateral position ventilation distributions showed a difference in the left lung, with the right lung maintaining a similar distribution in both lateral positions. This is likely caused by more pronounced anatomical changes in the left lung when changing positions. Conclusions The modified filtration technique was demonstrated to be effective in separating the ventilation and perfusion signals in spontaneously breathing subjects. Gravity dependence was seen only in ventilation distribution in the left lung in lateral positions, suggesting gravity based shifts in anatomical structures. Gravity dependence was not seen in any perfusion distributions.

Regional and overall ventilation inhomogeneities in preterm and term-born infants

OBJECTIVES: We compared ventilation inhomogeneity assessed by electrical impedance tomography (EIT) and multiple breath washout (MBW) in preterm and term-born infants. We hypothesised that EIT measurements in spontaneously breathing infants are repeatable and that differences in regional ventilation distribution measured by EIT can distinguish between preterm and term-born infants. DESIGN: Cross-sectional group comparison study. SETTING: Lung function laboratory at a University Children's Hospital. PARTICIPANTS: Seventeen healthy term-born and 15 preterm infants at a matched postmenstrual age of 44 weeks. MEASUREMENTS AND RESULTS: We concurrently measured ventilation inhomogeneity by EIT, ventilation inhomogeneity (LCI) and functional residual capacity (FRC) by MBW and tidal breathing variables during unsedated quiet sleep. EIT measurements were highly repeatable (coefficient of variation 3.6%). Preterm infants showed significantly more ventilation of the independent parts of the lungs compared to healthy term-born infants assessed by EIT (mean difference 5.0, 95 CI 1.3-8%). Whereas the two groups showed no differences in lung volumes or ventilation inhomogeneities assessed by MBW, EIT discriminated better between term and preterm infants. (FRC/kg: mean difference 1.1 mL, 95% CI -1.4-3.8 mL; LCI: mean difference 0.03, 95% CI -0.32-0.25). CONCLUSIONS: EIT shows distinct differences in ventilation distribution between preterm and term-born infants, which cannot be detected by MBW. Although preterm infants are capable of dynamically maintaining overall functional residual volume and ventilation distribution, they show some spatial differences from fullterm infants.

The role of brand marketing in snowboarding: A comparative study of Switzerland and New Zealand

Introduction: Brands play an essential role in the organizational structure of snowboarding by sponsoring athletes, arranging events, contributing to product development and developing long-term partnerships with other key actors. However, the specialities of their role in scene sports, such as creating identities, networking and brand marketing strategies, have not been extensively researched. This study aims to provide an analysis of the function of brands within the snowboarding subculture by comparing how the sport is organized in Switzerland and New Zealand. Sociological theories of subcultures (Hitzler & Niederbacher, 2010) and social networks (Stegbauer, 2008) are used to defi ne the structures of the sport, whereas marketing and branding theories (Adjouri & Stastny, 2006) help to understand the role of the brands. Snowboarding will be defi ned as an alternative sports subculture based on characteristics such as aesthetics, adventure and new resources of performance (Schwier, 2006). Such a defi nition also begs for a novel form of analyzing its organization. Unlike more conventional structures, the organization of snowboarding allows a variety of actors to get involved in leading the sport. By portraying and encouraging differentiated identities and lifestyles, athletes provide a space for other actors to fi nd their place within the sport (Wheaton, 2005). According to Stegbauers network theory, individual actors are able to obtain high positions and defi ne their identity depending on their ties to actors and networks within the subculture (Stegbauer, 2008). For example, social capital, contacts within the sport and insider knowledge on subculture-related information enable actors to get closer to the core (Hitzler & Niederbacher, 2010). Actors who do not have close networks and allies within the subculture are less likely to engage successfully in the culture, whether as an individual or as a commercial actor (Thorpe, 2011). This study focuses on the organizational structure of snowboarding by comparing the development of the sport in Switzerland and New Zealand. An analysis of snowboarding in two nations with diverse cultures and economic systems allows a further defi nition of the structural organization of the sport and explains how brands play an important role in the sport. Methods: The structural organization of the sport will be analyzed through an ethnographic approach, using participant observation at various leading events in Switzerland (Freestyle.ch, European Open) and New Zealand (World Heli Challenge, New Zealand Open, New Zealand Winter Games). The data is analyzed using grounded theory (Glaser & Strauss 1967) and gives an overview of the actors that are playing an important role in the local development of snowboarding. Participant observation was also used as a tool to get inside the sport culture and opened up the possibility to make over 40 semi-structured qualitative expert interviews with international core actors from 11 countries. Obtaining access to one actor as a partner early on helped to get inside the local sport culture. The ‘snowball effect’ allowed the researcher to acquire access, build trust and conduct interviews with experts within the core scene. All the interviewed actors have a direct infl uence on the sport in one or both countries, which permit a cross-analysis. The data of the interviews was evaluated through content analysis (Mayring 2010). The two methods together provided suffi cient data to analyze the organizational structure and discuss the role of brand marketing within snowboarding. Results: An actors mapping by means of a center-periphery framework has identifi ed fi ve main core groups: athletes, media representatives, brand-marketing managers, resort managers and event organizers. In both countries the same grouping of actors were found. Despite possessing different and frequently multiple roles and responsibilities, core actors appear to have a strong common identifi cation as ‘snowboarders’, are considered to be part of the organizational elite of the sport and tend to advocate similar goals. The author has found that brands in Switzerland tend to have a larger impact on the broader snowboarding culture due to a number of factors discussed below. Due to a larger amount of snowboarders and stronger economic power in Europe, snowboarders are making attempts to differentiate themselves from other winter sports, while competing with each other to develop niche markets. In New Zealand, on the other hand, the smaller market enables more cooperation and mutual respect within snowboarders. Further they are more closely linked to other winter sports and are satisfi ed with being lumped together. In both countries, brands have taken up the role of supporting young athletes, organizing competitions and feeding media with subculture-related content. Brands build their image and identity through the collaboration with particular athletes who can represent the values of the brand. Local and global communities with similar lifestyles and interests are being built around brands that share a common vision of the sport. The dominance of brands in snowboarding has enabled them with the power to organize and rule the sport through its fan base and supporters. Brands were defi ned by interviewees as independent institutions led by insiders who know the codes and symbols of the sport and were given trust and credibility. The brands identify themselves as the engines of the sport by providing the equipment, opportunities for athletes to get exposure, allowing media to get exclusive information on activities, events and sport-related stories. Differences between the two countries are more related to the economic system. While Switzerland is well integrated in the broader European market, New Zealand’s geographical isolation and close proximity to Australia tends to limit its market. Further, due to different cultural lifestyles, access to resorts and seasonal restrictions, to name a few, the amount of people practicing winter sports in New Zealand is much smaller than in Switzerland. However, this also presents numerous advantages. For example, the short southern hemisphere winter season in New Zealand enables them to attract international sports athletes, brands and representatives in a period when Europe and North America is in summer. Further, the unique snow conditions in New Zealand and majestic landscape is popular for attracting world renowned photo- and cinematographers. Another advantage is the less populated network as it provides the opportunity for individuals to gain easier access to the core of the sport, obtain diverse positions and form a unique identity and market. In Switzerland, on the other hand, the snowboarding network is dense with few positions available for the taking. Homegrown brands with core recognition are found in both countries. It was found that the Swiss brands tend to have a larger impact on the market, whereas in New Zealand, the sport is more dependent on import products by foreign brands. Further, athletes, events and resorts in New Zealand are often dependent on large brand sponsorships from abroad such as from brand headquarters in the Unites States. Thus, due to its location in the centre of Europe, Swiss brands can take advantage of brands which are closer in proximity and culture to sponsor athletes and events. In terms of media coverage, winter sports in New Zealand tend to have a minor coverage and tradition in local mass media, which leads to less exposure, recognition and investment into the sport. This is also related to how snowboarding is more integrated into other winter sports in New Zealand. Another difference is the accessibility of the ski resort by the population. While in Switzerland the resorts are mostly being visited by day-travelers, ‘weekend warriors’ and holiday makers, the location of the resorts in New Zealand make it diffi cult to visit for one day. This is in part due to the fact that Swiss ski resorts and villages are usually the same location and are accessible through public transportation, while the ski resorts in New Zealand have been built separately from the villages. Further, the villages have not been built to accommodate to high tourist arrivals. Thus, accommodation and food facilities are limited and there is a lack of public transportation to the resorts. Discussion: The fi ndings show that networks and social relations combined with specifi c knowledge on scene-related attributes are crucial in obtaining opportunities within the sport. Partnerships as well as competition between these different actors are necessary for core acceptance, peer credibility and successful commercial interests. Brands need to maintain effective marketing strategies and identities which incorporate subcultural forms of behavior and communication. In order to sustain credibility from its fans, athletes and other snowboarding actors, brands need to maintain their insider status through social networks and commercial branding strategies. The interaction between all actors is a reciprocated process, where social capital, networks and identities are being shared. While the overall structure of snowboard subcultures in Europe and New Zealand are similar, there are some distinct characteristics which make each one unique. References Adjouri, N. & Stastny, P. (2006). Sport-Branding: Mit Sport-Sponsoring zum Markenerfolg. Wiesbaden: Gabler. Glaser, B. & Strauss, K. (1967). The discovery of grounded theory: Strategies for qualitative research. Chicago: Aldine. Hebdige, D. (2009). Subculture; The meaning of style. New York: Routledge. Hitzler, R. & Niederbacher, A. (2010). Leben in Szenen: Formen juveniler Vergemeinschaftung heute. Wiesbaden: Verlag für Sozialwissenschaften. Mayring, P. (2010). Qualitative Inhaltsanalyse: Grundlagen und Techniken. Weinheim: Beltz. Schwier, J. (2006). Repräsentationen des Trendsports. Jugendliche Bewegungskulturen, Medien und Marketing. In: Gugutzer, R. (Hrsg.). body turn. Perspektiven der Soziologie des Körpers und des Sports. Bielefeld: transcript (S. 321-340). Stegbauer, C. (2008). Netzwerkanalyse und Netzwerktheorie. Ein neues Paradigma in den Sozialwissenschaften. Wiesbaden: VS Verlag für Sozialwissenschaften. Thorpe, H. (2011). Snowboarding bodies in theory and practice. Basingstoke: Palgrave Macmillan. Wheaton, B. (2005). Understanding lifestyle sports; consumption, identity and difference. New York: Routledge.