Desenvolvimento de um sistema Inteligente para a análise de cartas dinamométricas no método de elevação por bombeio mecânico

The artificial lifting of oil is needed when the pressure of the reservoir is not high enough so that the fluid contained in it can reach the surface spontaneously. Thus the increase in energy supplies artificial or additional fluid integral to the well to come to the surface. The rod pump is the artificial lift method most used in the world and the dynamometer card (surface and down-hole) is the best tool for the analysis of a well equipped with such method. A computational method using Artificial Neural Networks MLP was and developed using pre-established patterns, based on its geometry, the downhole card are used for training the network and then the network provides the knowledge for classification of new cards, allows the fails diagnose in the system and operation conditions of the lifting system. These routines could be integrated to a supervisory system that collects the cards to be analyzed

Evaluación financiera del uso de gas licuado de petróleo (GLP) en empresas dedicadas al transporte de carga terrestre.

Las empresas de transporte de carga terrestre del país son parte de uno de los sectores productivos más importantes, que contribuyen en la economía y en el producto interno bruto (PIB), a través de las operaciones requeridas para su actividad. Así mismo, influye en los costos de los bienes que se movilizan desde su lugar de embarque hacia su destino, mediante el cobro de la tarifa del servicio de transporte y/o logística. El origen de esta investigación radica en la incidencia del alza de los precios de los combustibles en los costos operativos de las empresas dedicadas al transporte de carga terrestre nacional, y la decisión de estas; entre incrementar el importe de la prestación, afectando el nivel de competitividad que se tiene en el mercado o absorber las variaciones provocando la disminución del margen de ganancias. El objetivo de este trabajo es brindar información referente al uso del recurso energético alternativo llamado gas licuado de petróleo (GLP) para automotores, que disminuya significativamente los costos de operación del sector de transporte de carga terrestre en el país y contribuya de esta manera en la competitividad brindando precios rentables sin sacrificar sus utilidades. Además, dar a conocer la legislación, los aspectos técnicos de instalación, mantenimiento, el análisis del ahorro generado y el valor de la inversión. Con el propósito que los empresarios de dicho sector puedan tomar la decisión, de invertir en el proyecto del uso del recurso energético alternativo GLP. El desarrollo de la investigación se enfocó en las empresas dedicadas al transporte de carga terrestre ubicadas en el departamento de San Salvador, municipio de San Salvador. Formando un universo de 66 empresas y de las que se tomó una muestra de 32. La encuesta fue la herramienta de investigación utilizada para entrevistar a los empresarios y/o responsables del área contable financiera, por medio de preguntas relevantes para la comprobación de la problemática y la ampliación del estudio, las cuales se encuentran tabuladas y con su correspondiente análisis. Los resultados obtenidos permitieron elaborar un diagnóstico, el cual determina que las empresas han visto afectados sus costos de operación de una forma representativa, principalmente por el incremento de los precios de los combustibles, este dato lo reportan por medio del análisis financiero que de forma periódica llevan a cabo. También los empresarios poseen información significativa de algunas opciones para el ahorro en los carburantes, y además se evidencia la necesidad de un documento completo que les brinde el conocimiento de una alternativa para enfrentar la problemática mencionada. En conclusión, al ejecutar el estudio y al realizar el análisis financiero de los ahorros generados a partir de la instalación del sistema de conversión combustión Diesel – Gas Licuado de Petróleo (GLP) en los equipos de transporte de carga terrestre, se observa una disminución sustancial de los costos operativos de la empresa permitiendo mayores ganancias y una mejor competitividad del negocio. Por lo tanto, se recomienda sean tomados en cuenta los resultados de esta investigación por parte de los empresarios de dicho sector para que les sirva de apoyo en la evaluación y toma de mejores decisiones.

Sistema de sensoriamento eletromagnético utilizado para detecção da contaminação do óleo isolante do motor no método de elevação artificial do tipo bombeio centrífugo submerso

In the artificial lift method by Electrical Submersible Pump (ESP), the energy is transmitted for the well´s deep through a flat electric handle, where it is converted into mechanical energy through an engine of sub-surface, which is connected to a centrifugal pump. This transmits energy to the fluid under the pressure form, bringing it to the surface In this method the subsurface equipment is basically divided into: pump, seal and motor. The main function of the seal is the protect the motor, avoiding the motor´s oil be contaminated by oil production and the consequent burning of it. Over time, the seal will be wearing and initiates a contamination of motor oil, causing it to lose its insulating characteristics. This work presents a design of a magnetic sensor capable of detecting contamination of insulating oil used in the artificial lift method of oil-type Electrical Submersible Pump (ESP). The objective of this sensor is to generate alarm signal just the moment when the contamination in the isolated oil is present, enabling the implementation of a predictive maintenance. The prototype was designed to work in harsh conditions to reach a depth of 2000m and temperatures up to 150°C. It was used a simulator software to defined the mechanical and electromagnetic variables. Results of field experiments were performed to validate the prototype. The final results performed in an ESP system with a 62HP motor showed a good reliability and fast response of the prototype.

Controle aplicado a poços com método de elevação e bombeio centrífugo submerso

The Electrical Submersible Pumping is an artificial lift method for oil wells employed in onshore and offshore areas. The economic revenue of the petroleum production in a well depends on the oil flow and the availability of lifting equipment. The fewer the failures, the lower the revenue shortfall and costs to repair it. The frequency with which failures occur depends on the operating conditions to which the pumps are submitted. In high-productivity offshore wells monitoring is done by operators with engineering support 24h/day, which is not economically viable for the land areas. In this context, the automation of onshore wells has clear economic advantages. This work proposes a system capable of automatically control the operation of electrical submersible pumps, installed in oil wells, by an adjustment at the electric motor rotation based on signals provided by sensors installed on the surface and subsurface, keeping the pump operating within the recommended range, closest to the well s potential. Techniques are developed to estimate unmeasured variables, enabling the automation of wells that do not have all the required sensors. The automatic adjustment, according to an algorithm that runs on a programmable logic controller maintains the flow and submergence within acceptable parameters avoiding undesirable operating conditions, as the gas interference and high engine temperature, without need to resort to stopping the engine, which would reduce the its useful life. The control strategy described, based on modeling of physical phenomena and operational experience reported in literature, is materialized in terms of a fuzzy controller based on rules, and all generated information can be accompanied by a supervisory system

Percepción de los trabajadores acerca de la seguridad en el trabajo en una empresa del sector de gas natural en Casanare

Introducción: La percepción puede ser considerada principalmente como un grupo de procesos internos en las personas que genera en los observadores una representación mental del entorno. Percibir es adelantarse al suceso, a lo que puede llegar a suceder, determinando lo que puede ser un peligro a nuestra seguridad y salud. Objetivo: El presente estudio tiene como objetivo determinar la percepción de los trabajadores acerca de la seguridad en el trabajo en áreas de procesos automatizados y mecánicas en una empresa del sector de gas natural en el departamento de Casanare, Colombia 2016. Metodología: Se llevó a cabo un estudio de corte transversal en 50 trabajadores de una empresa del sector de gas natural en Casanare. Se uttilizó el Cuestionario nórdico NOSACQ-50-Spanish, instrumento validado para evaluar la percepción acerca de la seguridad y salud en el lugar de trabajo. Se incluyeron variables sociodemográficas, laborales y las relacionadas con la percepción de la seguridad en el lugar del trabajo. Para el análsiis estadistico se calcularon medidas de tendencia central y de dispersión. El estudio de la percepción de seguridad tuvo como puntos de corte: < 2,5 mala percepción y > 2,5 buena percepción. Se emplearon pruebas de asociación X2 o test exacto de Fisher (valores esperados <5) y medidas de asociación OR con sus intervalos de confianza del 95% y se usaron modelos de regresión lineal. Resultados: El total de trabajadores fue de 50 personas, el 76% correspondió al sexo masculino y la mayor distribución se presentó en áreas mecánicas con 52% frente al 48% que se encontró en áreas automatizadas. Se halló asociación estadísticamente significativa entre las variables sociodemográficas área/sexo (Pr = 0,016), indicando que a los trabajadores de sexo femenino se les ubican en el área mecánica mientras que los de sexo masculino, laboran en todas las áreas sin darle relevancia al género. También se encontró asociación con las variables área/año de nacimiento (Pr =0.022), indicando que en el área automatizada se dejan profesionales con promedio de edad de 32 años, por el tipo de requisitos en competencias que exigen para ejecutar las labores. Para las demás variables ocupacionales que evaluaron la percepción de seguridad frente al trabajo, no se encontró asociación significativa. Conclusión: Los resultados permiten realizar acciones en pro de mejorar la percepción de los trabajadores dentro de la organización. Se podrán desarrollar programas de seguridad y salud en el trabajo, que respondan de manera efectiva a los peligros laborales detectados.

Particle and gaseous emissions from compressed natural gas and ultralow sulphur diesel-fuelled buses at four steady engine loads

Exhaust emissions from thirteen compressed natural gas (CNG) and nine ultralow sulphur diesel in-service transport buses were monitored on a chassis dynamometer. Measurements were carried out at idle and at three steady engine loads of 25%, 50% and 100% of maximum power at a fixed speed of 60 kmph. Emission factors were estimated for particle mass and number, carbon dioxide and oxides of nitrogen for two types of CNG buses (Scania and MAN, compatible with Euro 2 and 3 emission standards, respectively) and two types of diesel buses (Volvo Pre-Euro/Euro1 and Mercedez OC500 Euro3). All emission factors increased with load. The median particle mass emission factor for the CNG buses was less than 1% of that from the diesel buses at all loads. However, the particle number emission factors did not show a statistically significant difference between buses operating on the two types of fuel. In this paper, for the very first time, particle number emission factors are presented at four steady state engine loads for CNG buses. Median values ranged from the order of 1012 particles min-1 at idle to 1015 particles km-1 at full power. Most of the particles observed in the CNG emissions were in the nanoparticle size range and likely to be composed of volatile organic compounds The CO2 emission factors were about 20% to 30% greater for the diesel buses over the CNG buses, while the oxides of nitrogen emission factors did not show any difference due to the large variation between buses.

Microstructural characterization of electron beam evaporated tungsten oxide films for gas sensing applications

Tungsten trioxide is one of the potential semiconducting materials used for sensing NH3, CO, CH4 and acetaldehyde gases. The current research aims at development, microstructural characterization and gas sensing properties of thin films of Tungsten trioxide (WO3). In this paper, we intend to present the microstructural characterization of these films as a function of post annealing heat treatment. Microstructural and elemental analysis of electron beam evaporated WO3 thin films and iron doped WO3 films (WO3:Fe) have been carried out using analytical techniques such as Transmission electron microscopy, Rutherford Backscattered Spectroscopy and XPS analysis. TEM analysis revealed that annealing at 300oC for 1 hour improves cyrstallinity of WO3 film. Both WO3 and WO3:Fe films had uniform thickness and the values corresponded to those measured during deposition. RBS results show a fairly high concentration of oxygen at the film surface as well as in the bulk for both films, which might be due to adsorption of oxygen from atmosphere or lattice oxygen vacancy inherent in WO3 structure. XPS results indicate that tungsten exists in 4d electronic state on the surface but at a depth of 10 nm, both 4d and 4f electronic states were observed. Atomic force microscopy reveals nanosize particles and porous structure of the film. This study shows e-beam evaporation technique produces nanoaparticles and porous WO3 films suitable for gas sensing applications and doping with iron decreases the porosity and particle size which can help improve the gas selectivity.

Electron beam evaporation of tungsten oxide films for gas sensors

Pure and Iron incorporated nanostructured Tungsten Oxide (WO3) thin films were investigated for gas sensing applications using noise spectroscopy. The WO3 sensor was able to detect lower concentrations (1 ppm-10 ppm) of NH3, CO, CH4 and Acetaldehyde gases at higher operating temperatures between 100oC to 250oC. The response of the WO3 sensor to NH3, CH4 and Acetaldehyde at lower temperatures (50oC-100oC) was significant when the sensor was photo-activated using blue-light emitting diode (Blue-LED). The WO3 with Fe (WO3:Fe) was found to show some response to Acetaldehyde gas only at relatively higher operating temperature (250oC) and gas concentration of 10 ppm.

Thin film deposition and characterization of pure and iron-doped electron-beam evaporated tungsten oxide for gas sensors

Pure Tungsten Oxide (WO3) and Iron-doped (10 at%) Tungsten Oxide (WO3:Fe) nanostructured thin films were prepared using a dual crucible Electron Beam Evaporation techniques. The films were deposited at room temperature in high vacuum condition on glass substrate and post-heat treated at 300 oC for 1 hour. From the study of X-ray diffraction and Raman the characteristics of the as-deposited WO3 and WO3:Fe films indicated non-crystalline nature. The surface roughness of all the films showed in the order of 2.5 nm as observed using Atomic Force Microscopy (AFM). X-Ray Photoelectron Spectroscopy (XPS) analysis revealed tungsten oxide films with stoichiometry close to WO3. The addition of Fe to WO3 produced a smaller particle size and lower porosity as observed using Transmission Electron Microscopy (TEM). A slight difference in optical band gap energies of 3.22 eV and 3.12 eV were found between the as-deposited WO3 and WO3:Fe films, respectively. However, the difference in the band gap energies of the annealed films were significantly higher having values of 3.12 eV and 2.61 eV for the WO3 and WO3:Fe films, respectively. The heat treated samples were investigated for gas sensing applications using noise spectroscopy and doping of Fe to WO3 reduced the sensitivity to certain gasses. Detailed study of the WO3 and WO3:Fe films gas sensing properties is the subject of another paper.