Metacognitive monitoring and control in elementary school children: Their interrelations and their role for test performance

Contemporary models of self-regulated learning emphasize the role of distal motivational factors for student's achievement, on the one side, and the proximal role of metacognitive monitoring and control for learning and test outcomes, on the other side. In the present study, two larger samples of elementary school children (9- and 11-year-olds) were included and their mastery-oriented motivation, metacognitive monitoring and control skills were integrated into structural equation models testing and comparing the relative impact of these different constituents for self-regulated learning. For one, results indicate that the factorial structure of monitoring, control and mastery motivation was invariant across the two age groups. Of specific interest was the finding that there were age-dependent structural links between monitoring, control, and test performance (closer links in the older compared to the younger children), with high confidence yielding a direct and positive effect on test performance and a direct and negative effect on adequate control behavior in the achievement test. Mastery-oriented motivation was not found to be substantially associated with monitoring (confidence), control (detection and correction of errors), or test performance underlining the importance of proximal, metacognitive factors for test performance in elementary school children.

Group abilities, individual group-efficacy beliefs and performance motivation: A mediation analysis

Introduction Research has shown that individuals infer their group-efficacy beliefs from the groups’ abilities to perform in specific tasks. Group abilities also seem to affect team members’ performance motivation adding a psychological advantage to teams already high on task relevant abilities. In a recent study we found the effect of group abilities on individual performance motivation to be partially mediated by the team members’ individual group-efficacy beliefs which is an example of how attributes on a group-level can be affecting individual-level parameters. Objectives The study aimed at testing the possibility to reduce the direct and mediated effects of low group abilities on performance motivation by augmenting the visibility of individual contributions to group performances via the inclusion of a separate ranking on individual performances. Method Forty-seven students (M=22.83 years, SD=2.83, 34% women) of the University of Bern participated in the study. At three collection points (t1-3) subjects were provided information about fictive team members with whom they had to imagine performing a group triathlon. Three values (low, medium, high) of the other team members’ abilities to perform in their parts of the triathlon (swimming and biking) were combined in a 3x3 full factorial design yielding nine groups with different ability profiles. At t1 subjects were asked to rate their confidence that the teams would perform well in the triathlon task, at t2 and t3 subjects were asked how motivated they were to perform at their best in the respective groups. At t3 the presence of an individual performance ranking was mentioned in the cover story. Mixed linear models (SPSS) and structural equation models for complex survey data (Mplus) were specified to estimate the effects of the individual performance rankings on the relationship between group-efficacy beliefs and performance motivation. Results A significant interaction effect for individual group-efficacy beliefs and the triathlon condition on performance motivation was found; the effect of group-efficacy beliefs on performance motivation being smaller with individual performance rankings available. The partial mediation of group attributes on performance motivation by group-efficacy beliefs disappeared with the announcement of individual performance rankings. Conclusion In teams low in task relevant abilities the disadvantageous effect of group-efficacy beliefs on performance motivation might be reduced by providing means of evaluating individual performances apart from a group’s overall performance. While it is believed that a common group goal is a core criterion for a well performing sport group future studies should also aim at the possible benefit of individualized goal setting in groups.

Group abilities, individual group-efficacy beliefs and performance motivation: A mediation analysis

Introduction Research has shown that individuals infer their group-efficacy beliefs from the groups’ abilities to perform in specific tasks. Group abilities also seem to affect team members’ performance motivation adding a psychological advantage to teams already high on task relevant abilities. In a recent study we found the effect of group abilities on individual performance motivation to be partially mediated by the team members’ individual group-efficacy beliefs which is an example of how attributes on a group-level can be affecting individual-level parameters. Objectives The study aimed at testing the possibility to reduce the direct and mediated effects of low group abilities on performance motivation by augmenting the visibility of individual contributions to group performances via the inclusion of a separate ranking on individual performances. Method Forty-seven students (M=22.83 years, SD=2.83, 34% women) of the University of Bern participated in the study. At three collection points (t1-3) subjects were provided information about fictive team members with whom they had to imagine performing a group triathlon. Three values (low, medium, high) of the other team members’ abilities to perform in their parts of the triathlon (swimming and biking) were combined in a 3x3 full factorial design yielding nine groups with different ability profiles. At t1 subjects were asked to rate their confidence that the teams would perform well in the triathlon task, at t2 and t3 subjects were asked how motivated they were to perform at their best in the respective groups. At t3 the presence of an individual performance ranking was mentioned in the cover story. Mixed linear models (SPSS) and structural equation models for complex survey data (Mplus) were specified to estimate the effects of the individual performance rankings on the relationship between group-efficacy beliefs and performance motivation. Results A significant interaction effect for individual group-efficacy beliefs and the triathlon condition on performance motivation was found; the effect of group-efficacy beliefs on performance motivation being smaller with individual performance rankings available. The partial mediation of group attributes on performance motivation by group-efficacy beliefs disappeared with the announcement of individual performance rankings. Conclusion In teams low in task relevant abilities the disadvantageous effect of group-efficacy beliefs on performance motivation might be reduced by providing means of evaluating individual performances apart from a group’s overall performance. While it is believed that a common group goal is a core criterion for a well performing sport group future studies should also aim at the possible benefit of individualized goal setting in groups.

Longitudinal relationships between prospective memory, executive functions, and metacognition in young elementary school children

Prospective Memory (PM), executive functions (EF) and metacognition (MC) are relevant cognitive abilities for everyday functioning. They all seem to develop gradually in childhood and appear to be theoretically closely related; however, their empirical links remain unclear, especially in children. As a recent study revealed significant cross-sectional links between PM and EF, and a weaker but close link between PM and MC in 2nd graders (Spiess, Meier, & Roebers, submitted), this study focused on their short-term relationships and on their development. 119 children (MT1 =95 months, SDT1, = 4.8 months) completed the same tasks (one PM, three EF, one MC task) twice with a time-lag of 7 months. T-tests showed significant improvements in all tasks, except in the updating task. Different structural equation models were contrasted (AMOS); the best fitting model revealed that PMT2 was similarly predicted by PMT1 (r = .33) and EFT1 (r = .34). Additionally, EFT1 predicted MCT2 (r = .44), chi2(118, 119) = 128.91, p = .23, TLI = .968, CFI = .978, RMSEA = .028. Results show that PM, EF, and MC develop during childhood and also demonstrate that they are linked not only cross-sectionally, but longitudinally. Findings are discussed in a broader developmental framework.

Pond-Breeding Amphibian Species Distributions in a Beaver-Modified Landscape, Acadia National Park, Mount Desert Island, Maine

In order to maintain pond-breeding amphibian species richness, it is important to understand how both natural and anthropogenic disturbances affect species assemblages and individual species distributions both at the scale of individual ponds and at a larger landscape scale. The goal of this project was to investigate what characteristics of ponds and the surrounding wetland landscape were most effective in predicting pond-breeding species richness and the individual occurrence of wood frog (Rana sylvatica), bullfrog (Rana catesbeiana) and pickerel frog (Rana palustris) breeding sites in a beaver-modified landscape and how this landscape has changed over time. The wetland landscape of Acadia National Park was historically modified by the natural disturbance cycles of beaver (Castor cazadensis), and since their reintroduction to the island in 1921, beaver have played a large role in creating and maintaining palustrine wetlands. In 2000 and 2001, I studied pond-breeding amphibian assemblages at 71 palustrine wetlands in Acadia National Park, Mount Desert Island, Maine. I determined breeding presence of 7 amphibian species and quantified 15 variables describing local pond conditions and characteristics of the wetland landscape. I developed a priori models to predict sites with high amphibian species and used model selection with Akaike's Information Criterion (AIC) to identify important variables. Single species models were also developed to predict wood frog, bullfrog and pickerel frogs breeding presence. The variables for wetland connectivity by stream corridors and the presence of beaver disturbance were the most effective variables to predict sites with high amphibian richness. Wood frog breeding was best predicted by local scale variables describing temporary, fishless wetlands and the absence of active beaver disturbance. Abandoned beaver sites provided wood frog breeding habitat (70%) in a similar proportion to that found in non beaver-influenced sites (79%). In contrast, bullfrog breeding presence was limited to active beaver wetlands with fish and permanent water, and 80% of breeding sites were large (≥2ha in size). Pickerel frog breeding site selection was predicted best by the connectivity of sites in the landscape by stream corridors. Models including the presence of beaver disturbance, greater wetland perimeter and greater depth were included in the confidence set of pickerel frog models but showed considerably less support. Analysis of historic aerial photographs showed an 89% increase in the total number of ponded wetlands available in the landscape between the years of 1944 and 1997. Beaver colonization generally converted forested wetlands and riparian areas to open water and emergent wetlands. Temporal colonization of beaver wetlands favored large sites low in the watersheds and sites that were impounded later were generally smaller, higher in the watershed, and more likely to be abandoned. These results suggest that beaver have not only increased the number of available breeding sites in the landscape for pond-breeding amphibians, but the resulting mosaic of active and abandoned beaver wetlands also provides suitable breeding habitat for species with differing habitat requirements.

Impact of a modified dietary plan on the health related quality of life of minority participants in the Women's Healthy Eating and Living (WHEL) Study

Advances in medical technology, in genetics, and in clinical research have led to early detection of cancer, precise diagnosis, and effective treatment modalities. Decline in cancer incidence and mortality due to cancer has led to increased number of long-term survivors. However, the ethnic minority population has not experienced this decline and still continues to carry a disparate proportion of the cancer burden. Majority of the clinical research including survivorship studies have recruited and continue to recruit a convenient sample of middle- to upper-class Caucasian survivors. Thus, minorities are underrepresented in cancer research in terms of both clinical studies and in health related quality of life (HRQOL) studies. ^ Life style and diet have been associated with increased risk of breast cancer. High vegetable low fat diet has been shown to reduce recurrence of breast cancer and early death. The Women's Healthy Eating and Living Study is an ongoing multi-site randomized controlled trial that is evaluating the high-vegetable low fat diet in reducing the recurrence of breast cancer and early death. The purpose of this dissertation was to (1) compare the impact of the modified diet on the HRQOL during the first 12-month period on specific Minorities and matched Caucasians; (2) identify predictors that significantly impact the HRQOL of the study participants; and (3) using the structural equation modeling assess the impact of nutrition on the HRQOL of the intervention group participants. Findings suggest that there are no significant differences in change in HRQOL between Minorities and Caucasians; between Minorities in the intervention group and those in the comparison group; and between women in the intervention group and those in the comparison group. Minority indicator variable and Intervention/Comparison group indicator variable were not found to be good predictors of HRQOL. Although the structural equation models suggested viable representation of the relationship between the antecedent variables, the mediating variables and the two outcome variables, the impact of nutrition was not statistically significant to be included in the model. This dissertation, by analyzing the HRQOL of minorities in the WHEL Study, attempted to add to the knowledge base specific to minority cancer survivors. ^

La dimensión de la subjetividad en la formación del valor inmobiliario : aplicación del método de análisis de ecuaciones estructurales al mercado residencial de Lisboa

The discretionality and the appraisers’ subjectivity that characterize traditional real estate valuation are still allowed to take part in the formation of the asset price even when respecting international standards (EVS, IVS) or Appraisal Institution´s regulations (TEGOVA, RICS, etc.). The application of econometric and statistical methods to real estate valuation aims at the elimination of subjectivity on the appraisal process. But the unanswered question underneath this subject is the following: How important is the subjective component on real estate appraisal value formation? On this study Structural Equation Models (SEM) are used to determine the importance of the objective and subjective components on real estate valuation value formation as well as the weight of economic factors and the current economic context on real estate appraisal for mortgage purposes price formation. There were used two latent variables, Objective Component and Subjective Component, witch aggregate objective observed variables and subjective observed and unobserved variables, respectively. Factorial Exploratory Analysis is the statistical technique used in order to link the observed variables extracted from the valuation appraisal reports to the latent constructs derived from the theoretical model. SEM models were used to refine the model, eliminate non‐significant variables and to determine the weight of Objective and Subjective latent variables. These techniques were applied to a sample of over 11.000 real estate assets appraisal reports throughout the time period between November of 2006 and April of 2012. The real assets used on this study are located on Lisbon’s Metropolitan Area – “Grande Lisboa” –, Portugal. From this study, we conclude that Subjective Component has a considerable weight on real estate appraisal value formation and that the external factor Economic Situation has a very small impact on real estate appraisal value formation.

Modelización de los Procesos de Cristalización en Poliolefinas

“Por lo tanto, la cristalización de polímeros se supone, y en las teorías se describe a menudo, como un proceso de múltiples pasos con muchos aspectos físico-químicos y estructurales influyendo en él. Debido a la propia estructura de la cadena, es fácil entender que un proceso que es termodinámicamente forzado a aumentar su ordenamiento local, se vea obstaculizado geométricamente y, por tanto, no puede conducirse a un estado de equilibrio final. Como resultado, se forman habitualmente estructuras de no equilibrio con diferentes características dependiendo de la temperatura, presión, cizallamiento y otros parámetros físico-químicos del sistema”. Estas palabras, pronunciadas recientemente por el profesor Bernhard Wunderlich, uno de los mas relevantes fisico-quimicos que han abordado en las ultimas décadas el estudio del estado físico de las macromoléculas, adelantan lo que de alguna manera se explicita en esta memoria y constituyen el “leitmotiv” de este trabajo de tesis. El mecanismo de la cristalización de polímeros esta aun bajo debate en la comunidad de la física de polímeros y la mayoría de los abordajes experimentales se explican a través de la teoría LH. Esta teoría clásica debida a Lauritzen y Hoffman (LH), y que es una generalización de la teoría de cristalización de una molécula pequeña desde la fase de vapor, describe satisfactoriamente muchas observaciones experimentales aunque esta lejos de explicar el complejo fenómeno de la cristalización de polímeros. De hecho, la formulación original de esta teoría en el National Bureau of Standards, a comienzos de la década de los 70, sufrió varias reformulaciones importantes a lo largo de la década de los 80, buscando su adaptación a los hallazgos experimentales. Así nació el régimen III de cristalización que posibilita la creacion de nichos moleculares en la superficie y que dio pie al paradigma ofrecido por Sadler y col., para justificar los experimentos que se obtenian por “scattering” de neutrones y otras técnicas como la técnica de “droplets” o enfriamiento rapido. Por encima de todo, el gran éxito de la teoría radica en que explica la dependencia inversa entre el tamaño del plegado molecular y el subenfriamiento, definido este ultimo como el intervalo de temperatura que media entre la temperatura de equilibrio y la temperatura de cristalización. El problema concreto que aborda esta tesis es el estudio de los procesos de ordenamiento de poliolefinas con distinto grado de ramificacion mediante simulaciones numéricas. Los copolimeros estudiados en esta tesis se consideran materiales modelo de gran homogeneidad molecular desde el punto de vista de la distribución de tamaños y de ramificaciones en la cadena polimérica. Se eligieron estas poliolefinas debido al gran interes experimental en conocer el cambio en las propiedades fisicas de los materiales dependiendo del tipo y cantidad de comonomero utilizado. Además, son modelos sobre los que existen una ingente cantidad de información experimental, que es algo que preocupa siempre al crear una realidad virtual como es la simulación. La experiencia en el grupo Biophym es que los resultados de simulación deben de tener siempre un correlato mas o menos próximo experimental y ese argumento se maneja a lo largo de esta memoria. Empíricamente, se conoce muy bien que las propiedades físicas de las poliolefinas, en suma dependen del tipo y de la cantidad de ramificaciones que presenta el material polimérico. Sin embargo, tal como se ha explicado no existen modelos teóricos adecuados que expliquen los mecanismos subyacentes de los efectos de las ramas. La memoria de este trabajo es amplia por la complejidad del tema. Se inicia con una extensa introducción sobre los conceptos básicos de una macromolecula que son relevantes para entender el contenido del resto de la memoria. Se definen los conceptos de macromolecula flexible, distribuciones y momentos, y su comportamiento en disolución y fundido con los correspondientes parametros caracteristicos. Se pone especial énfasis en el concepto de “entanglement” o enmaranamiento por considerarse clave a la hora de tratar macromoléculas con una longitud superior a la longitud critica de enmaranamiento. Finaliza esta introducción con una reseña sobre el estado del arte en la simulación de los procesos de cristalización. En un segundo capitulo del trabajo se expone detalladamente la metodología usada en cada grupo de casos. En el primer capitulo de resultados, se discuten los estudios de simulación en disolución diluida para sistemas lineales y ramificados de cadena única. Este caso mas simple depende claramente del potencial de torsión elegido tal como se discute a lo largo del texto. La formación de los núcleos “babys” propuestos por Muthukumar parece que son consecuencia del potencial de torsión, ya que este facilita los estados de torsión mas estables. Así que se propone el análisis de otros potenciales que son igualmente utilizados y los resultados obtenidos sobre la cristalización, discutidos en consecuencia. Seguidamente, en un segundo capitulo de resultados se estudian moleculas de alcanos de cadena larga lineales y ramificados en un fundido por simulaciones atomisticas como un modelo de polietileno. Los resultados atomisticos pese a ser de gran detalle no logran captar en su totalidad los efectos experimentales que se observan en los fundidos subenfriados en su etapa previa al estado ordenado. Por esta razon se discuten en los capítulos 3 y 4 de resultados sistemas de cadenas cortas y largas utilizando dos modelos de grano grueso (CG-PVA y CG-PE). El modelo CG-PE se desarrollo durante la tesis. El uso de modelos de grano grueso garantiza una mayor eficiencia computacional con respecto a los modelos atomísticos y son suficientes para mostrar los fenómenos a la escala relevante para la cristalización. En todos estos estudios mencionados se sigue la evolución de los procesos de ordenamiento y de fusión en simulaciones de relajación isoterma y no isoterma. Como resultado de los modelos de simulación, se han evaluado distintas propiedades fisicas como la longitud de segmento ordenado, la cristalinidad, temperaturas de fusion/cristalizacion, etc., lo que permite una comparación con los resultados experimentales. Se demuestra claramente que los sistemas ramificados retrasan y dificultan el orden de la cadena polimérica y por tanto, las regiones cristalinas ordenadas decrecen al crecer las ramas. Como una conclusión general parece mostrarse una tendencia a la formación de estructuras localmente ordenadas que crecen como bloques para completar el espacio de cristalización que puede alcanzarse a una temperatura y a una escala de tiempo determinada. Finalmente hay que señalar que los efectos observados, estan en concordancia con otros resultados tanto teoricos/simulacion como experimentales discutidos a lo largo de esta memoria. Su resumen se muestra en un capitulo de conclusiones y líneas futuras de investigación que se abren como consecuencia de esta memoria. Hay que mencionar que el ritmo de investigación se ha acentuado notablemente en el ultimo ano de trabajo, en parte debido a las ventajas notables obtenidas por el uso de la metodología de grano grueso que pese a ser muy importante para esta memoria no repercute fácilmente en trabajos publicables. Todo ello justifica que gran parte de los resultados esten en fase de publicación. Abstract “Polymer crystallization is therefore assumed, and in theories often described, to be a multi step process with many influencing aspects. Because of the chain structure, it is easy to understand that a process which is thermodynamically forced to increase local ordering but is geometrically hindered cannot proceed into a final equilibrium state. As a result, nonequilibrium structures with different characteristics are usually formed, which depend on temperature, pressure, shearing and other parameters”. These words, recently written by Professor Bernhard Wunderlich, one of the most prominent researchers in polymer physics, put somehow in value the "leitmotiv "of this thesis. The crystallization mechanism of polymers is still under debate in the physics community and most of the experimental findings are still explained by invoking the LH theory. This classical theory, which was initially formulated by Lauritzen and Hoffman (LH), is indeed a generalization of the crystallization theory for small molecules from the vapor phase. Even though it describes satisfactorily many experimental observations, it is far from explaining the complex phenomenon of polymer crystallization. This theory was firstly devised in the early 70s at the National Bureau of Standards. It was successively reformulated along the 80s to fit the experimental findings. Thus, the crystallization regime III was introduced into the theory in order to explain the results found in neutron scattering, droplet or quenching experiments. This concept defines the roughness of the crystallization surface leading to the paradigm proposed by Sadler et al. The great success of this theory is the ability to explain the inverse dependence of the molecular folding size on the supercooling, the latter defined as the temperature interval between the equilibrium temperature and the crystallization temperature. The main scope of this thesis is the study of ordering processes in polyolefins with different degree of branching by using computer simulations. The copolymers studied along this work are considered materials of high molecular homogeneity, from the point of view of both size and branching distributions of the polymer chain. These polyolefins were selected due to the great interest to understand their structure– property relationships. It is important to note that there is a vast amount of experimental data concerning these materials, which is essential to create a virtual reality as is the simulation. The Biophym research group has a wide experience in the correlation between simulation data and experimental results, being this idea highly alive along this work. Empirically, it is well-known that the physical properties of the polyolefins depend on the type and amount of branches presented in the polymeric material. However, there are not suitable models to explain the underlying mechanisms associated to branching. This report is extensive due to the complexity of the topic under study. It begins with a general introduction to the basics concepts of macromolecular physics. This chapter is relevant to understand the content of the present document. Some concepts are defined along this section, among others the flexibility of macromolecules, size distributions and moments, and the behavior in solution and melt along with their corresponding characteristic parameters. Special emphasis is placed on the concept of "entanglement" which is a key item when dealing with macromolecules having a molecular size greater than the critical entanglement length. The introduction finishes with a review of the state of art on the simulation of crystallization processes. The second chapter of the thesis describes, in detail, the computational methodology used in each study. In the first results section, we discuss the simulation studies in dilute solution for linear and short chain branched single chain models. The simplest case is clearly dependent on the selected torsion potential as it is discussed throughout the text. For example, the formation of baby nuclei proposed by Mutukhumar seems to result from the effects of the torsion potential. Thus, we propose the analysis of other torsion potentials that are also used by other research groups. The results obtained on crystallization processes are accordingly discussed. Then, in a second results section, we study linear and branched long-chain alkane molecules in a melt by atomistic simulations as a polyethylene-like model. In spite of the great detail given by atomistic simulations, they are not able to fully capture the experimental facts observed in supercooled melts, in particular the pre-ordered states. For this reason, we discuss short and long chains systems using two coarse-grained models (CG-PVA and CG-PE) in section 3 and 4 of chapter 2. The CG-PE model was developed during the thesis. The use of coarse-grained models ensures greater computational efficiency with respect to atomistic models and is enough to show the relevant scale phenomena for crystallization. In all the analysis we follow the evolution of the ordering and melting processes by both isothermal and non isothermal simulations. During this thesis we have obtained different physical properties such as stem length, crystallinity, melting/crystallization temperatures, and so on. We show that branches in the chains cause a delay in the crystallization and hinder the ordering of the polymer chain. Therefore, crystalline regions decrease in size as branching increases. As a general conclusion, it seems that there is a tendency in the macromolecular systems to form ordered structures, which can grown locally as blocks, occupying the crystallization space at a given temperature and time scale. Finally it should be noted that the observed effects are consistent with both, other theoretical/simulation and experimental results. The summary is provided in the conclusions chapter along with future research lines that open as result of this report. It should be mentioned that the research work has speeded up markedly in the last year, in part because of the remarkable benefits obtained by the use of coarse-grained methodology that despite being very important for this thesis work, is not easily publishable by itself. All this justify that most of the results are still in the publication phase.

Desarrollo de un modelo integral de evaluación para instituciones de educación superior y análisis de su impacto en la planificación y gestión institucional

El propósito de esta tesis doctoral es el desarrollo de un modelo integral de evaluación de la gestión para instituciones de educación superior (IES), fundamentado en valorar la gestión de diferentes subsistemas que la integran, así como estudiar el impacto en la planificación y gestión institucional. Este Modelo de Evaluación Institucional fue denominado Modelo Integral de Evaluación de Gestión de las IES (MIEGIES), que incorpora la gestión de la complejidad, los aspectos gerenciales, el compromiso o responsabilidad social, los recursos, además de los procesos propios universitarios con una visión integral de la gestión. Las bases conceptuales se establecen por una revisión del contexto mundial de la educación superior, pasando por un análisis sobre evaluación y calidad en entornos universitarios. La siguiente reflexión conceptual versó sobre la gestión de la complejidad, de la gestión gerencial, de la gestión de responsabilidad social universitaria, de la gestión de los recursos y de la gestión de los procesos, seguida por un aporte sobre modelaje y modelos. Para finalizar, se presenta un resumen teórico sobre el alcance de la aplicación de ecuaciones estructurales para la validación de modelos. El desarrollo del modelo conceptual, dimensiones e indicadores, fue efectuado aplicando los principios de la metodología de sistemas suaves –SSM. Para ello, se identifica la definición raíz (DR), la razón sistémica de ser del modelo, para posteriormente desarrollar sus componentes y principios conceptuales. El modelo quedó integrado por cinco subsistemas, denominados: de la Complejidad, de la Responsabilidad Social Universitaria, Gerencial, de Procesos y de Recursos. Los subsistemas se consideran como dimensiones e indicadores para el análisis y son los agentes críticos para el funcionamiento de una IES. Los aspectos referidos a lo Epistemetodológico, comenzó por identificar el enfoque epistemológico que sustenta el abordaje metodológico escogido. A continuación se identifican los elementos clásicos que se siguieron para llevar a cabo la investigación: Alcance o profundidad, población y muestra, instrumentos de recolección de información y su validación, para finalizar con la explicación procedimental para validar el modelo MIEGIES. La población considerada para el estudio empírico de validación fueron 585 personas distribuidas entre alumnos, docentes, personal administrativo y directivos de una Universidad Pública Venezolana. La muestra calculada fue de 238 individuos, número considerado representativo de la población. La aplicación de los instrumentos diseñados y validados permitió la obtención de un conjunto de datos, a partir de los cuales se validó el modelo MIEGIES. La validación del Modelo MIGEIES parte de sugerencias conceptuales para el análisis de los datos. Para ello se identificaron las variables relevantes, que pueden ser constructos o conceptos, las variables latentes que no pueden ser medidas directamente, sino que requiere seleccionar los indicadores que mejor las representan. Se aplicó la estrategia de modelación confirmatoria de los Modelos de Ecuaciones Estructurales (SEM). Para ello se parte de un análisis descriptivo de los datos, estimando la fiabilidad. A continuación se aplica un análisis factorial exploratorio y un análisis factorial confirmatorio. Para el análisis de la significancia del modelo global y el impacto en la planificación y gestión, se consideran el análisis de coeficientes de regresión y la tabla de ANOVA asociada, la cual de manera global especifica que el modelo planteado permite explicar la relación entre las variables definidas para la evaluación de la gestión de las IES. Así mismo, se encontró que este resultado de manera global explica que en la evaluación institucional tiene mucha importancia la gestión de la calidad y las finanzas. Es de especial importancia destacar el papel que desarrolla la planificación estratégica como herramienta de gestión que permite apoyar la toma de decisiones de las organizaciones en torno al quehacer actual y al camino que deben recorrer en el futuro para adecuarse a los cambios y a las demandas que les impone el entorno. El contraste estadístico de los dos modelos ajustados, el teórico y el empírico, permitió a través de técnicas estadísticas multivariables, demostrar de manera satisfactoria, la validez y aplicación del modelo propuesto en las IES. Los resultados obtenidos permiten afirmar que se pueden estimar de manera significativa los constructos que definen la evaluación de las instituciones de educación superior mediante el modelo elaborado. En el capítulo correspondiente a Conclusiones, se presenta en una de las primeras instancias, la relación conceptual propuesta entre los procesos de evaluación de la gestión institucional y de los cinco subsistemas que la integran. Posteriormente se encuentra que los modelos de ecuaciones estructurales con base en la estrategia de modelación confirmatoria es una herramienta estadística adecuada en la validación del modelo teórico, que fue el procedimiento propuesto en el marco de la investigación. En cuanto al análisis del impacto del Modelo en la Planificación y la Gestión, se concluye que ésta es una herramienta útil para cerrar el círculo de evaluación institucional. La planificación y la evaluación institucional son procesos inherentes a la filosofía de gestión. Es por ello que se recomienda su práctica como de necesario cumplimiento en todas las instancias funcionales y operativas de las Instituciones de Educación Superior. ABSTRACT The purpose of this dissertation is the development of a comprehensive model of management evaluation for higher education institutions (HEIs), based on evaluating the management of different subsystems and study the impact on planning and institutional management. This model was named Institutional Assessment Comprehensive Evaluation Model for the Management of HEI (in Spanish, MIEGIES). The model incorporates the management of complexity, management issues, commitment and social responsibility and resources in addition to the university's own processes with a comprehensive view of management. The conceptual bases are established by a review of the global context of higher education, through analysis and quality assessment in university environments. The following conceptual discussions covered the management of complexity, management practice, management of university social responsibility, resources and processes, followed by a contribution of modeling and models. Finally, a theoretical overview of the scope of application of structural equation model (SEM) validation is presented. The development of the conceptual model, dimensions and indicators was carried out applying the principles of soft systems methodology (SSM). For this, the root definition (RD), the systemic rationale of the model, to further develop their components and conceptual principles are identified. The model was composed of five subsystems, called: Complexity, University Social Responsibility, Management, Process and Resources. The subsystems are considered as dimensions and measures for analysis and are critical agents for the functioning of HEIs. In matters relating to epistemology and methodology we began to identify the approach that underpins the research: Scope, population and sample and data collection instruments. The classic elements that were followed to conduct research are identified. It ends with the procedural explanation to validate the MIEGIES model. The population considered for the empirical validation study was composed of 585 people distributed among students, faculty, staff and authorities of a public Venezuelan university. The calculated sample was 238 individuals, number considered representative of the population. The application of designed and validated instruments allowed obtaining a data set, from which the MIEGIES model was validated. The MIGEIES Model validation is initiated by the theoretical analysis of concepts. For this purpose the relevant variables that can be concepts or constructs were identified. The latent variables cannot be measured directly, but require selecting indicators that best represent them. Confirmatory modeling strategy of Structural Equation Modeling (SEM) was applied. To do this, we start from a descriptive analysis of the data, estimating reliability. An exploratory factor analysis and a confirmatory factor analysis were applied. To analyze the significance of the overall models the analysis of regression coefficients and the associated ANOVA table are considered. This comprehensively specifies that the proposed model can explain the relationship between the variables defined for evaluating the management of HEIs. It was also found that this result comprehensively explains that for institutional evaluation quality management and finance are very important. It is especially relevant to emphasize the role developed by strategic planning as a management tool that supports the decision making of organizations around their usual activities and the way they should evolve in the future in order to adapt to changes and demands imposed by the environment. The statistical test of the two fitted models, the theoretical and the empirical, enabled through multivariate statistical techniques to demonstrate satisfactorily the validity and application of the proposed model for HEIs. The results confirm that the constructs that define the evaluation of HEIs in the developed model can be estimated. In the Conclusions section the conceptual relationship between the processes of management evaluation and the five subsystems that comprise it are shown. Subsequently, it is indicated that structural equation models based on confirmatory modeling strategy is a suitable statistical tool in validating the theoretical model, which was proposed in the framework of the research procedure. The impact of the model in Planning and Management indicates that this is a useful tool to complete the institutional assessment. Planning and institutional assessment processes are inherent in management philosophy. That is why its practice is recommended as necessary compliance in all functional and operational units of HEIs.

The relationship between young people's transit use and their perceptions of equity concepts in transit service provision

This study investigates the effect of price and travel mode fairness and spatial equity in transit provision on the perceived transit service quality, willingness to pay, and habitual frequency of use. Based on the theory of planned behavior, we developed a web-based questionnaire for revealed preferences data collection. The survey was administered among young people in Copenhagen and Lisbon to explore the transit perceptions and use under different economic and transit provision conditions. The survey yielded 499 questionnaires, analyzed by means of structural equation models. Results show that higher perceived fairness relates positively to higher perceived quality of transit service and higher perceived ease of paying for transit use. Higher perceived spatial equity in service provision is associated with higher perceived service quality. Higher perceived service quality relates to higher perceived ease of payment, which links to higher frequency of transit use.

Transit Use by Young People in Times of Financial Austerity: A Cause of Equity Concern?

This study investigates the effect of price and travel time fairness and spatial equity in transit provision on the perceived transit service quality, willingness to pay, and habitual frequency of use. Based on the theory of planned behavior, we developed a web-based questionnaire for revealed preferences data collection. The survey was administered among young people in Copenhagen and Lisbon to explore the transit perceptions and use under different economic and transit provision conditions. The survey yielded 499 questionnaires, analyzed by means of structural equation models. Results show that higher perceived fairness relates positively to higher perceived quality of transit service and higher perceived ease of paying for transit use. Higher perceived spatial equity in service provision is associated with higher perceived service quality. Higher perceived service quality relates to higher perceived ease of payment, which links to higher frequency of transit use.

Modelo multivariante de evolución en el tiempo de la calidad percibida en la educación superior

Las instituciones de educación superior deben gestionar eficaz y eficientemente sus procesos de captación de nuevos estudiantes, y con este objetivo necesitan mejorar su comprensión sobre los antecedentes que inciden en la intención de recomendarlas. Por lo que esta Tesis Doctoral se centra en el estudio y análisis de las componentes de la calidad del servicio de la educación superior, como antecedentes de la intención de recomendación de una institución universitaria. El enfoque que se adopta en esta investigación integra las dimensiones de calidad docente y de calidad de servicio e incorpora en el análisis la valoración global de la carrera. Paralelamente se contempla la moderación de la experiencia y el desempeño académico del estudiante. En esta Tesis Doctoral se hace uso de la Encuesta de Calidad de la Universidad ORT Uruguay cedida a los autores para su explotación con fines de investigación. Los estudiantes cumplimentan la encuesta semestralmente con carácter obligatorio en una plataforma en línea autoadministrada, que permite identificar las valoraciones realizadas por los estudiantes a lo largo de su paso por la universidad. Por lo que la base de datos es un panel no balanceado que consta de 195.058 registros obtenidos, a partir de 7.077 estudiantes en 17 semestres (marzo de 2003 a 2011). La metodología se concreta en los Modelos de Ecuaciones Estructurales, que proporciona una serie de ventajas con respecto a otras aproximaciones. Una de las más importantes es que permite al investigador introducir información a priori y valorar su inclusión, además de reformular las modelizaciones propuestas desde una perspectiva multi-muestra. En esta investigación se estiman los modelos con MPLUS 7. Entre las principales conclusiones de esta Tesis Doctoral cabe señalar que las percepciones de calidad, servicio, docencia y carrera, inciden positivamente en la intención de recomendar la universidad, y que la variable experiencia del estudiante modera dichas relaciones. Los resultados señalan, en general, que a medida que los estudiantes avanzan en su carrera, los efectos totales de la percepción de la calidad del servicio en la calidad global de la carrera y en la intención de recomendar la universidad son mayores que los efectos que tiene la percepción de calidad de la docencia. Estos hallazgos señalan la necesidad que tienen estas instituciones de educación superior de incorporar en su planificación estratégica la segmentación de los estudiantes según su experiencia. ABSTRACT For institutions of higher education to effectively and efficiently manage their processes for attracting new students, they need to understand the influences that activate student intentions to recommend a program and/or college. This Thesis describes research identifying the quality components of a university that serve as antecedents of student intentions to recommend. The research design integrates teaching and service dimensions of higher education, as well as measures of student perceptions of the overall quality of a program. And introduces the student quality and student experience during the program as moderators of these relationships. This Thesis makes use of the Quality Survey of the Universidad ORT Uruguay ceded to the authors for their exploitation for research purposes. The students complete the survey each semester in a self-administered online platform, which allows to identify the assessments conducted by the students throughout its passage by the university. So that the database is an unbalanced panel consisting of 195.058 records obtained from 7.077 students in 17 semesters (march 2003 to 2011). The methodology of analysis incorporated Simultaneous Equation Models, which provides a number of advantages with respect to other approaches. One of the most important is that it allows the researcher to introduce a priori information and assess its inclusion, in addition to reformulate the modellings proposals with a multi-sample approach. In this research the models are estimated with MPLUS 7. Based on the findings, student perceptions of quality, service, teaching and program, impact positively the intent to recommend the university, but the student’s experience during the program moderates these relationships. Overall, the results indicate that as students advance in the program, the full effects of the perception of service quality in the overall quality of the program and in the intention to recommend the university, outweigh the effects of the perceived teaching quality. The results indicate the need for institutions of higher education to incorporate in its strategic planning the segmentation of the students according to their experience during the program.

Optimización multiobjetivo inteligente del dimensionamiento energético en sistemas ferroviarios señalizados y en plataformas software de tiempo real

La capacidad de transporte es uno de los baremos fundamentales para evaluar la progresión que puede llegar a tener un área económica y social. Es un sector de elevada importancia para la sociedad actual. Englobado en los distintos tipos de transporte, uno de los medios de transporte que se encuentra más en alza en la actualidad, es el ferroviario. Tanto para movilidad de pasajeros como para mercancías, el tren se ha convertido en un medio de transporte muy útil. Se encuentra dentro de las ciudades, entre ciudades con un radio pequeño entre ellas e incluso cada vez más, gracias a la alta velocidad, entre ciudades con gran distancia entre ellas. Esta Tesis pretende ayudar en el diseño de una de las etapas más importantes de los Proyectos de instalación de un sistema ferroviario: el sistema eléctrico de tracción. La fase de diseño de un sistema eléctrico de tracción ferroviaria se enfrenta a muchas dudas que deben ser resueltas con precisión. Del éxito de esta fase dependerá la capacidad de afrontar las demandas de energía de la explotación ferroviaria. También se debe atender a los costes de instalación y de operación, tanto costes directos como indirectos. Con la Metodología que se presenta en esta Tesis se ofrecerá al diseñador la opción de manejar un sistema experto que como soluciones le plantee un conjunto de escenarios de sistemas eléctricos correctos, comprobados por resolución de modelos de ecuaciones. Correctos desde el punto de vista de validez de distintos parámetros eléctrico, como de costes presupuestarios e impacto de costes indirectos. Por tanto, el diseñador al haber hecho uso de esta Metodología, tendría en un espacio de tiempo relativamente corto, un conjunto de soluciones factibles con las que poder elegir cuál convendría más según sus intereses finales. Esta Tesis se ha desarrollado en una vía de investigación integrada dentro del Centro de Investigaciones Ferroviarias CITEF-UPM. Entre otros proyectos y vías de investigación, en CITEF se ha venido trabajando en estudios de validación y dimensionamiento de sistemas eléctricos ferroviarios con diversos y variados clientes y sistemas ferroviarios. A lo largo de los proyectos realizados, el interés siempre ha girado mayoritariamente sobre los siguientes parámetros del sistema eléctrico: - Calcular número y posición de subestaciones de tracción. Potencia de cada subestación. - Tipo de catenaria a lo largo del recorrido. Conductores que componen la catenaria. Características. - Calcular número y posición de autotransformadores para sistemas funcionando en alterna bitensión o 2x25kV. - Posición Zonas Neutras. - Validación según normativa de: o Caídas de tensión en la línea o Tensiones máximas en el retorno de la línea o Sobrecalentamiento de conductores o Sobrecalentamiento de los transformadores de las subestaciones de tracción La idea es que las soluciones aportadas por la Metodología sugieran escenarios donde de estos parámetros estén dentro de los límites que marca la normativa. Tener la posibilidad de tener un repositorio de posibles escenarios donde los parámetros y elementos eléctricos estén calculados como correctos, aporta un avance en tiempos y en pruebas, que mejoraría ostensiblemente el proceso habitual de diseño para los sistemas eléctricos ferroviarios. Los costes directos referidos a elementos como subestaciones de tracción, autotransformadores, zonas neutras, ocupan un gran volumen dentro del presupuesto de un sistema ferroviario. En esta Tesis se ha querido profundizar también en el efecto de los costes indirectos provocados en la instalación y operación de sistemas eléctricos. Aquellos derivados del impacto medioambiental, los costes que se generan al mantener los equipos eléctricos y la instalación de la catenaria, los costes que implican la conexión entre las subestaciones de tracción con la red general o de distribución y por último, los costes de instalación propios de cada elemento compondrían los costes indirectos que, según experiencia, se han pensado relevantes para ejercer un cierto control sobre ellos. La Metodología cubrirá la posibilidad de que los diseños eléctricos propuestos tengan en cuenta variaciones de coste inasumibles o directamente, proponer en igualdad de condiciones de parámetros eléctricos, los más baratos en función de los costes comentados. Analizando los costes directos e indirectos, se ha pensado dividir su impacto entre los que se computan en la instalación y los que suceden posteriormente, durante la operación de la línea ferroviaria. Estos costes normalmente suelen ser contrapuestos, cuánto mejor es uno peor suele ser el otro y viceversa, por lo que hace falta un sistema que trate ambos objetivos por separado. Para conseguir los objetivos comentados, se ha construido la Metodología sobre tres pilares básicos: - Simulador ferroviario Hamlet: Este simulador integra módulos para construir esquemas de vías ferroviarios completos; módulo de simulación mecánica y de la tracción de material rodante; módulo de señalización ferroviaria; módulo de sistema eléctrico. Software realizado en C++ y Matlab. - Análisis y estudio de cómo focalizar los distintos posibles escenarios eléctricos, para que puedan ser examinados rápidamente. Pico de demanda máxima de potencia por el tráfico ferroviario. - Algoritmos de optimización: A partir de un estudio de los posibles algoritmos adaptables a un sistema tan complejo como el que se plantea, se decidió que los algoritmos genéticos serían los elegidos. Se han escogido 3 algoritmos genéticos, permitiendo recabar información acerca del comportamiento y resultados de cada uno de ellos. Los elegidos por motivos de tiempos de respuesta, multiobjetividad, facilidad de adaptación y buena y amplia aplicación en proyectos de ingeniería fueron: NSGA-II, AMGA-II y ɛ-MOEA. - Diseño de funciones y modelo preparado para trabajar con los costes directos e indirectos y las restricciones básicas que los escenarios eléctricos no deberían violar. Estas restricciones vigilan el comportamiento eléctrico y la estabilidad presupuestaria. Las pruebas realizadas utilizando el sistema han tratado o bien de copiar situaciones que se puedan dar en la realidad o directamente sistemas y problemas reales. Esto ha proporcionado además de la posibilidad de validar la Metodología, también se ha posibilitado la comparación entre los algoritmos genéticos, comparar sistemas eléctricos escogidos con los reales y llegar a conclusiones muy satisfactorias. La Metodología sugiere una vía de trabajo muy interesante, tanto por los resultados ya obtenidos como por las oportunidades que puede llegar a crear con la evolución de la misma. Esta Tesis se ha desarrollado con esta idea, por lo que se espera pueda servir como otro factor para trabajar con la validación y diseño de sistemas eléctricos ferroviarios. ABSTRACT Transport capacity is one of the critical points to evaluate the progress than a specific social and economical area is able to reach. This is a sector of high significance for the actual society. Included inside the most common types of transport, one of the means of transport which is elevating its use nowadays is the railway. Such as for passenger transport of weight movements, the train is being consolidated like a very useful mean of transport. Railways are installed in many geography areas. Everyone know train in cities, or connecting cities inside a surrounding area or even more often, taking into account the high-speed, there are railways infrastructure between cities separated with a long distance. This Ph.D work aims to help in the process to design one of the most essential steps in Installation Projects belonging to a railway system: Power Supply System. Design step of the railway power supply, usually confronts to several doubts and uncertainties, which must be solved with high accuracy. Capacity to supply power to the railway traffic depends on the success of this step. On the other hand is very important to manage the direct and indirect costs derived from Installation and Operation. With the Methodology is presented in this Thesis, it will be offered to the designer the possibility to handle an expert system that finally will fill a set of possible solutions. These solutions must be ready to work properly in the railway system, and they were tested using complex equation models. This Thesis has been developed through a research way, integrated inside Citef (Railway Research Centre of Technical University of Madrid). Among other projects and research ways, in Citef has been working in several validation studies and dimensioning of railway power supplies. It is been working by a large range of clients and railways systems. Along the accomplished Projects, the main goal has been rounded mostly about the next list of parameters of the electrical system: - Calculating number and location of traction substations. Power of each substation. - Type of Overhead contact line or catenary through the railway line. The wires which set up the catenary. Main Characteristics. - Calculating number and position of autotransformers for systems working in alternating current bi-voltage of called 2x25 kV. - Location of Neutral Zones. - Validating upon regulation of: o Drop voltages along the line o Maximum return voltages in the line o Overheating/overcurrent of the wires of the catenary o Avoiding overheating in the transformers of the traction substations. Main objective is that the solutions given by the Methodology, could be suggest scenarios where all of these parameters from above, would be between the limits established in the regulation. Having the choice to achieve a repository of possible good scenarios, where the parameters and electrical elements will be assigned like ready to work, that gives a great advance in terms of times and avoiding several tests. All of this would improve evidently the regular railway electrical systems process design. Direct costs referred to elements like traction substations, autotransformers, neutral zones, usually take up a great volume inside the general budget in railway systems. In this Thesis has been thought to bear in mind another kind of costs related to railway systems, also called indirect costs. These could be enveloped by those enmarked during installation and operation of electrical systems. Those derived from environmental impact; costs generated during the maintenance of the electrical elements and catenary; costs involved in the connection between traction substations and general electric grid; finally costs linked with the own installation of the whole electrical elements needed for the correct performance of the railway system. These are integrated inside the set has been collected taking into account own experience and research works. They are relevant to be controlled for our Methodology, just in case for the designers of this type of systems. The Methodology will cover the possibility that the final proposed power supply systems will be hold non-acceptable variations of costs, comparing with initial expected budgets, or directly assuming a threshold of budget for electrical elements in actual scenario, and achieving the cheapest in terms of commented costs from above. Analyzing direct and indirect costs, has been thought to divide their impact between two main categories. First one will be inside the Installation and the other category will comply with the costs often happens during Railway Operation time. These costs normally are opposed, that means when one is better the other turn into worse, in costs meaning. For this reason is necessary treating both objectives separately, in order to evaluate correctly the impact of each one into the final system. The objectives detailed before build the Methodology under three basic pillars: - Railway simulator Hamlet: This software has modules to configure many railway type of lines; mechanical and traction module to simulate the movement of rolling stock; signaling module; power supply module. This software has been developed using C++ and Matlab R13a - Previously has been mandatory to study how would be possible to work properly with a great number of feasible electrical systems. The target comprised the quick examination of these set of scenarios in terms of time. This point is talking about Maximum power demand peaks by railway operation plans. - Optimization algorithms. A railway infrastructure is a very complex system. At the beginning it was necessary to search about techniques and optimization algorithms, which could be adaptable to this complex system. Finally three genetic multiobjective algorithms were the chosen. Final decision was taken attending to reasons such as time complexity, able to multiobjective, easy to integrate in our problem and with a large application in engineering tasks. They are: NSGA-II, AMGA-II and ɛ-MOEA. - Designing objectives functions and equation model ready to work with the direct and indirect costs. The basic restrictions are not able to avoid, like budgetary or electrical, connected hardly with the recommended performance of elements, catenary and safety in a electrical railway systems. The battery of tests launched to the Methodology has been designed to be as real as possible. In fact, due to our work in Citef and with real Projects, has been integrated and configured three real railway lines, in order to evaluate correctly the final results collected by the Methodology. Another topic of our tests has been the comparison between the performances of the three algorithms chosen. Final step has been the comparison again with different possible good solutions, it means power supply system designs, provided by the Methodology, testing the validity of them. Once this work has been finished, the conclusions have been very satisfactory. Therefore this Thesis suggest a very interesting way of research and work, in terms of the results obtained and for the future opportunities can be created with the evolution of this. This Thesis has been developed with this idea in mind, so is expected this work could adhere another factor to work in the difficult task of validation and design of railway power supply systems.

GESTÃO DO CONHECIMENTO: UM ESTUDO SOBRE A RELAÇÃO ENTRE A LIDERANÇA TRANSFORMACIONAL, A CONVERSÃO DO CONHECIMENTO E A EFICÁCIA ORGANIZACIONAL

Este estudo teve como objetivo principal analisar a relação entre a Liderança Transformacional, a Conversão do Conhecimento e a Eficácia Organizacional. Foram considerados como pressupostos teóricos conceitos consolidados sobre os temas desta relação, além de recentes pesquisas já realizadas em outros países e contextos organizacionais. Com base nisto identificou-se potencial estudo de um modelo que relacionasse estes três conceitos. Para tal considera-se que as organizações que buscam atingir Vantagem Competitiva e incorporam a Knowledge-Based View possam conquistar diferenciação frente a seus concorrentes. Nesse contexto o conhecimento ganha maior destaque e papel protagonista nestas organizações. Dessa forma criar conhecimento através de seus colaboradores, passa a ser um dos desafios dessas organizações ao passo que sugere melhoria de seus indicadores Econômicos, Sociais, Sistêmicos e Políticos, o que se define por Eficácia Organizacional. Portanto os modos de conversão do conhecimento nas organizações, demonstram relevância, uma vez que se cria e se converte conhecimentos através da interação entre o conhecimento existente de seus colaboradores. Essa conversão do conhecimento ou modelo SECI possui quatro modos que são a Socialização, Externalização, Combinação e Internalização. Nessa perspectiva a liderança nas organizações apresenta-se como um elemento capaz de influenciar seus colaboradores, propiciando maior dinâmica ao modelo SECI de conversão do conhecimento. Se identifica então na liderança do tipo Transformacional, características que possam influenciar colaboradores e entende-se que esta relação entre a Liderança Transformacional e a Conversão do Conhecimento possa ter influência positiva nos indicadores da Eficácia Organizacional. Dessa forma esta pesquisa buscou analisar um modelo que explorasse essa relação entre a liderança do tipo Transformacional, a Conversão do Conhecimento (SECI) e a Eficácia Organizacional. Esta pesquisa teve o caráter quantitativo com coleta de dados através do método survey, obtendo um total de 230 respondentes válidos de diferentes organizações. O instrumento de coleta de dados foi composto por afirmativas relativas ao modelo de relação pesquisado com um total de 44 itens. O perfil de respondentes concentrou-se entre 30 e 39 anos de idade, com a predominância de organizações privadas e de departamentos de TI/Telecom, Docência e Recursos Humanos respectivamente. O tratamento dos dados foi através da Análise Fatorial Exploratória e Modelagem de Equações Estruturais via Partial Least Square Path Modeling (PLS-PM). Como resultado da análise desta pesquisa, as hipóteses puderam ser confirmadas, concluindo que a Liderança Transformacional apresenta influência positiva nos modos de Conversão do Conhecimento e que; a Conversão do Conhecimento influencia positivamente na Eficácia Organizacional. Ainda, concluiu-se que a percepção entre os respondentes não apresenta resultado diferente sobre o modelo desta pesquisa entre quem possui ou não função de liderança.

Active control of waves in a cochlear model with subpartitions.

Multiscale asymptotic methods developed previously to study macromechanical wave propagation in cochlear models are generalized here to include active control of a cochlear partition having three subpartitions, the basilar membrane, the reticular lamina, and the tectorial membrane. Activation of outer hair cells by stereocilia displacement and/or by lateral wall stretching result in a frequency-dependent force acting between the reticular lamina and basilar membrane. Wavelength-dependent fluid loads are estimated by using the unsteady Stokes' equations, except in the narrow gap between the tectorial membrane and reticular lamina, where lubrication theory is appropriate. The local wavenumber and subpartition amplitude ratios are determined from the zeroth order equations of motion. A solvability relation for the first order equations of motion determines the subpartition amplitudes. The main findings are as follows: The reticular lamina and tectorial membrane move in unison with essentially no squeezing of the gap; an active force level consistent with measurements on isolated outer hair cells can provide a 35-dB amplification and sharpening of subpartition waveforms by delaying dissipation and allowing a greater structural resonance to occur before the wave is cut off; however, previously postulated activity mechanisms for single partition models cannot achieve sharp enough tuning in subpartitioned models.