The effect of construction pattern and unit interlock on the structural behaviour of block pavements

The maintenance or even replacement of cracked pavements requires considerable financial resources and puts a large burden on the budgets of local councils. In addition to these costs, local councils also face liability claims arising from uneven or cracked pedestrian pavements. These currently cost the Manchester City Council and Preston City Council around £6 million a year each. Design procedures are empirical. A better understanding of the interaction between paving blocks, bedding sand and subbase was necessary in order to determine the mode of failure of pavements under load. Increasing applied stress was found to mobilise ‘‘rotational interlock’’, providing increased pavement stiffness and thus increased load dissipation resulting in lower transmitted stress on the subgrade. The indications from the literature
review were that pavements are designed to fail by excessive deformation and that paving blocks remained uncracked at failure. This was confirmed with experimental data which was obtained from tests on segments of pavements that were laid/constructed in a purpose built test frame in the laboratory.

Crack detection of steel girders using Brillouin optical time domain analysis

This article presents the results from an experimental program designed to evaluate the performance of a system consisting of a readout unit and a ribbon type Fiber Optic Sensor (FOS) based on Brillouin Optical Time Domain Analysis (BOTDA). The system is intended for the detection of cracks as well as the monitoring of long-term performance for steel bridge girders. The program consisted of introducing a crack at the center of a 3-m-long steel beam and monitoring its progression using static loading tests performed at ambient and sub-zero temperatures. For sensor lengths similar to those used in the field, the resonant frequency shifts per unit increase in crack width were found to decrease from 114 MHz/mm at ambient temperature (~25C) to 65 MHz/mm at -10C. Results also revealed nonlinearity and variability, which can be attributed to an incompatibility between the settings of the laser pump in the readout unit and the sensor length. Significant losses were detected along the bonded segments of the sensor and were attributed to the presence of ripples along the sensor. These undulations worsen with a reduction in temperature and are induced by the bonding procedure as well as the slack provided in the plastic sleeves containing the splices.

Microstructural analysis of non-woven fabrics using scanning electron microscopy and image processing. Part 1:Development and verification of the methods

This paper reports image analysis methods that have been developed to study the microstructural changes of non-wovens made by the hydroentanglement process. The validity of the image processing techniques has been ascertained by applying them to test images with known properties. The parameters in preprocessing of the scanning electron microscope (SEM) images used in image processing have been tested and optimized. The fibre orientation distribution is estimated using fast Fourier transform (FFT) and Hough transform (HT) methods. The results obtained using these two methods are in good agreement. The HT method is more demanding in computational time compared with the Fourier transform (FT) method. However, the advantage of the HT method is that the actual orientation of the lines can be concluded directly from the result of the transform without the need for any further computation. The distribution of the length of the straight fibre segments of the fabrics is evaluated by the HT method. The effect of curl of the fibres on the result of this evaluation is shown.

Theory and Practice of Aircraft Performance

Textbook introducing the fundamentals of aircraft performance using industry standards and examples: bridging the gap between academia and industry
•Provides an extensive and detailed treatment of all segments of mission profile and overall aircraft performance
•Considers operating costs, safety, environmental and related systems issues
•Includes worked examples relating to current aircraft (Learjet 45, Tucano Turboprop Trainer, Advanced Jet Trainer and Airbus A320 types of aircraft)
•Suitable as a textbook for aircraft performance courses

Readjusting our Sporting Sites/Sight: Sportification and the Theatricality of Social Life

This paper points out the potential of using sport for the analysis of society. Cultivated human movement is a specific social and cultural subsystem (involving sport, movement culture and physical culture), yet it becomes a part of wider social discourses by extending some of its characteristics into various other spheres. This process, theorised as sportification, provides as useful concept to examine the permeation of certain phenomena from the area of sport into the social reality outside of sport. In this paper, we investigate the phenomena of sportification which we parallel with visual culture and spectatorship practices in the Renaissance era. The emphasis in our investigation is on theatricality and performativity; particularly, the superficial spectator engagement with modern sport and sporting spectacles. Unlike the significance afforded to visualisation and deeper symbolic interpretation in Renaissance art, contemporary cultural shifts have changed and challenged the ways in which the active and interacting body is positioned, politicised, symbolised and ultimately understood. We suggest here that the ways in which we view sport and sporting bodies within a (post)modern context (particularly with the confounding amalgamations of signs and symbols and emphasis on hyper-realities) has invariably become detached from sports’ profound metaphysical meanings and resonance. Subsequently, by emphasising the associations between social theatrics and the sporting complex, this paper aims to remind readers of ways that sport—as a nuanced phenomenon—can be operationalised to help us to contemplate questions about nature, society, ourselves and the complex worlds in which we live.

Computational design with flexible backbone sampling for protein remodeling and scaffolding of complex binding sites

Dissertation presented to obtain the Doutoramento (Ph.D.) degree in Biochemistry at the Instituto de Tecnologia Qu mica e Biol ogica da Universidade Nova de Lisboa

Unilever food solutions new digital CRM platform- what is the combination of tools, processes and content that will help Unilever food solutions grow his business?

Unilever Food Solutions new digital CRM1 Platform - What is the combination of tools, processes and content that will help Unilever Food Solutions grow his business? Unilever Food Solutions (UFS) intend to create a new online platform to enable it to communicate with segments of the markets, which have previously been too difficult to reach. Specifically targeted at Chefs and other food professionals, the aim is to create an interactive website, which delivers value to its intended users by providing a variety of relevant content and functions, while simultaneously opening up a potential transactional channel to those same users.

The fourth extracellular loop of the alpha subunit of Na,K-ATPase. Functional evidence for close proximity with the second extracellular loop.

Na,K-ATPase is the main active transport system that maintains the large gradients of Na(+) and K(+) across the plasma membrane of animal cells. The crystal structure of a K(+)-occluding conformation of this protein has been recently published, but the movements of its different domains allowing for the cation pumping mechanism are not yet known. The structure of many more conformations is known for the related calcium ATPase SERCA, but the reliability of homology modeling is poor for several domains with low sequence identity, in particular the extracellular loops. To better define the structure of the large fourth extracellular loop between the seventh and eighth transmembrane segments of the alpha subunit, we have studied the formation of a disulfide bond between pairs of cysteine residues introduced by site-directed mutagenesis in the second and the fourth extracellular loop. We found a specific pair of cysteine positions (Y308C and D884C) for which extracellular treatment with an oxidizing agent inhibited the Na,K pump function, which could be rapidly restored by a reducing agent. The formation of the disulfide bond occurred preferentially under the E2-P conformation of Na,K-ATPase, in the absence of extracellular cations. Using recently published crystal structure and a distance constraint reproducing the existence of disulfide bond, we performed an extensive conformational space search using simulated annealing and showed that the Tyr(308) and Asp(884) residues can be in close proximity, and simultaneously, the SYGQ motif of the fourth extracellular loop, known to interact with the extracellular domain of the beta subunit, can be exposed to the exterior of the protein and can easily interact with the beta subunit.

Transport of methotrexate by the in vitro isolated rabbit proximal tubule.

The tubular transport of [3H]methotrexate was studied in isolated nonperfused and perfused superficial proximal tubular segments of rabbit kidneys. Reabsorption represented only 5% of perfused methotrexate, and appeared to be mostly of passive nature inasmuch as it was not modified by reducing the temperature or by ouabain. Cellular accumulation in nonperfused segments and secretion in perfused tubules were highest in the S2 segment and lower in the S3 and S1 segments. Secretion against a bath-to-lumen concentration gradient was observed only in S2 segments (with a maximum methotrexate secretory rate of 478 +/- 48 fmol/mm.min and an apparent Km of transport of 363 +/- 32 microM), and was inhibited by probenecid and folate. The low capacity for methotrexate secretion may be explained by a low capacity of transport across the basolateral membrane of the proximal cell as methotrexate was accumulated only to a low extent in nonperfused tubules (tissue water to medium concentration ratio of 8.2 +/- 1 in S2 segments). During secretion a small amount of methotrexate was metabolized; the nature of the metabolite(s) remains to be defined.

Reproducibility of free-breathing cardiovascular magnetic resonance coronary angiography.

OBJECTIVE: Contemporary free-breathing non contrast enhanced cardiovascular magnetic resonance angiography (CMRA) was qualitatively and quantitatively evaluated to ascertain the reproducibility of the method for coronary artery luminal dimension measurements. SUBJECTS AND METHODS: Twenty-two healthy volunteers (mean age 32 +/- 7 years, 12 males) without coronary artery disease were imaged at 2 centers (1 each in Europe and North America) using navigator-gated and corrected SSFP CMRA on a commercial whole body 1.5T System. Repeat images of right (RCA, n = 21), left anterior descending (LAD, n = 14) and left circumflex (LCX, n = 14) coronary arteries were obtained in separate sessions using identical scan protocol and imaging parameters. True visible vessel length, signal-to-noise (SNR), contrast-to-noise ratios (CNR) and the average luminal diameter over the first 4 cm of the vessel were measured. Intra-observer, inter-observer and inter-scan reproducibility of coronary artery luminal diameter were determined using Pearson's correlation, Bland-Altman analysis and intraclass correlation coefficients (ICC). RESULTS: CNR, SNR and the mean length of the RCA, LAD and LCX imaged for original and repeat scans were not significantly different (all p > 0.30). There was a high degree of intra-observer, inter-observer and inter-scan agreements for RCA, LAD and LCX luminal diameter respectively on Bland-Altman and ICC analysis (ICC's for RCA: 0.98. 0.98 and 0.86; LAD: 0.89, 0.89 and 0.63; LCX: 0.95, 0.94 and 0.79). CONCLUSION: In a 2-center study, we demonstrate that free-breathing 3D SSFP CMRA can visualize long continuous segments of coronary vessels with highly reproducible measurements of luminal diameter.

Verbal ability, previous practice and load on short-term memory as determiners of differences in a complex learning task: an experimental study

Traditional psychometric theory and practice classify people according to broad ability dimensions but do not examine how these mental processes occur. Hunt and Lansman (1975) proposed a 'distributed memory' model of cognitive processes with emphasis on how to describe individual differences based on the assumption that each individual possesses the same components. It is in the quality of these components ~hat individual differences arise. Carroll (1974) expands Hunt's model to include a production system (after Newell and Simon, 1973) and a response system. He developed a framework of factor analytic (FA) factors for : the purpose of describing how individual differences may arise from them. This scheme is to be used in the analysis of psychometric tes ts . Recent advances in the field of information processing are examined and include. 1) Hunt's development of differences between subjects designated as high or low verbal , 2) Miller's pursuit of the magic number seven, plus or minus two, 3) Ferguson's examination of transfer and abilities and, 4) Brown's discoveries concerning strategy teaching and retardates . In order to examine possible sources of individual differences arising from cognitive tasks, traditional psychometric tests were searched for a suitable perceptual task which could be varied slightly and administered to gauge learning effects produced by controlling independent variables. It also had to be suitable for analysis using Carroll's f ramework . The Coding Task (a symbol substitution test) found i n the Performance Scale of the WISe was chosen. Two experiments were devised to test the following hypotheses. 1) High verbals should be able to complete significantly more items on the Symbol Substitution Task than low verbals (Hunt, Lansman, 1975). 2) Having previous practice on a task, where strategies involved in the task may be identified, increases the amount of output on a similar task (Carroll, 1974). J) There should be a sUbstantial decrease in the amount of output as the load on STM is increased (Miller, 1956) . 4) Repeated measures should produce an increase in output over trials and where individual differences in previously acquired abilities are involved, these should differentiate individuals over trials (Ferguson, 1956). S) Teaching slow learners a rehearsal strategy would improve their learning such that their learning would resemble that of normals on the ,:same task. (Brown, 1974). In the first experiment 60 subjects were d.ivided·into high and low verbal, further divided randomly into a practice group and nonpractice group. Five subjects in each group were assigned randomly to work on a five, seven and nine digit code throughout the experiment. The practice group was given three trials of two minutes each on the practice code (designed to eliminate transfer effects due to symbol similarity) and then three trials of two minutes each on the actual SST task . The nonpractice group was given three trials of two minutes each on the same actual SST task . Results were analyzed using a four-way analysis of variance . In the second experiment 18 slow learners were divided randomly into two groups. one group receiving a planned strategy practioe, the other receiving random practice. Both groups worked on the actual code to be used later in the actual task. Within each group subjects were randomly assigned to work on a five, seven or nine digit code throughout. Both practice and actual tests consisted on three trials of two minutes each. Results were analyzed using a three-way analysis of variance . It was found in t he first experiment that 1) high or low verbal ability by itself did not produce significantly different results. However, when in interaction with the other independent variables, a difference in performance was noted . 2) The previous practice variable was significant over all segments of the experiment. Those who received previo.us practice were able to score significantly higher than those without it. J) Increasing the size of the load on STM severely restricts performance. 4) The effect of repeated trials proved to be beneficial. Generally, gains were made on each successive trial within each group. S) In the second experiment, slow learners who were allowed to practice randomly performed better on the actual task than subjeots who were taught the code by means of a planned strategy. Upon analysis using the Carroll scheme, individual differences were noted in the ability to develop strategies of storing, searching and retrieving items from STM, and in adopting necessary rehearsals for retention in STM. While these strategies may benef it some it was found that for others they may be harmful . Temporal aspects and perceptual speed were also found to be sources of variance within individuals . Generally it was found that the largest single factor i nfluencing learning on this task was the repeated measures . What e~ables gains to be made, varies with individuals . There are environmental factors, specific abilities, strategy development, previous learning, amount of load on STM , perceptual and temporal parameters which influence learning and these have serious implications for educational programs .

Representations of swinging London in 1960s British cinema : Blowup (1966), Smashing Time (1967), and Performance (1970)

This thesis explores the representation of Swinging London in three examples of 1960s British cinema: Blowup (Michelangelo Antonioni, 1966), Smashing Time (Desmond Davis, 1967) and Performance (Donald Cammell and Nicolas Roeg, 1970). It suggests that the films chronologically signify the evolution, commodification and dissolution of the Swinging London era. The thesis explores how the concept of Swinging London is both critiqued and perpetuated in each film through the use of visual tropes: the reconstruction of London as a cinematic space; the Pop photographer; the dolly; representations of music performance and fashion; the appropriation of signs and symbols associated with the visual culture of Swinging London. Using fashion, music performance, consumerism and cultural symbolism as visual narratives, each film also explores the construction of youth identity through the representation of manufactured and mediated images. Ultimately, these films reinforce Swinging London as a visual economy that circulates media images as commodities within a system of exchange. With this in view, the signs and symbols that comprise the visual culture of Swinging London are as central and significant to the cultural era as their material reality. While they attempt to destabilize prevailing representations of the era through the reproduction and exchange of such symbols, Blowup, Smashing Time, and Performance nevertheless contribute to the nostalgia for Swinging London in larger cultural memory.

Examining the Learning Effects of Segmented Model Demonstrations on the Motor & Cognitive Learning of the Basketball Jump Shot

The purpose of the present experiment was to determine whether learning is optimized when providing the opportunity to observe either segments, or the whole basketball jump shot. Participants performed 50 jump-shots from the free throw line during acquisition, and returned one day later for a 10 shot retention test and a memory recall test of the jump-shot technique. Shot accuracy was assessed on a 5-point scale and technique assessed on a 7-point scale. The number of components recalled correctly by participants assessed mental representation. Retention results showed superior shot technique and recall success for those participants provided control over the frequency and type of modelled information compared to participants not provided control. Furthermore, participants in the self-condition utilized the part-model information more frequently than whole-model information highlighting the effectiveness of providing the learner control over viewing multiple segments of a skill compared to only watching the whole model.

"Profile of Industrial workers in Kerala - A Comparative Study of the Socioeconomic Profile of Workers in Traditional and Modern Industries

The objective of this study is to assess the changes that have been taking place in the socio-economic profile of organized industrial workers of Kerala in the context of the changes that have been taking place in the state's industrial structure. with this object in view, the study seeks to find out the similarities and differences in the profile of workers belonging to two Segments of factory sector industries in Kerala viz., modern and traditional segments. It also seeks to examine the factors leading to the differences in profile, if any, and their consequences. As noted earlier, the profile of workers may be influenced both by external societal factors and by internal factors like the difference in industrial structure and the technologies used. It is proposed to assess the relative importance of these two groups of factors. In drawing up the profile, we seek to find out whether the workers belonging to the organised sector of industry in Kerala particularly the more modern sector have begun to form a ‘select group‘ in the Kerala society and the total work force. Wherever possible, it is proposed to compare the profile of the Kerala workers with those of workers in other states of India. As an incidental objective, it is also proposed to find out to the extent possible, whether trends towards labour embourgeoisement and class shifting have begun to set in among the industrial workers of Kerala, particularly among the workers in the modern industries as a result of their relative affluence and their middle class socioeconomic background. besides, the study seeks to find out whether there is any difference in the class consciousness of workers belonging to these two segments of organized industry, arising from the differences in their economic status and social background.

Radiopacity and Chemical resistance of Elastomer-Barium sulphate nanocomposites with special reference to Natural Rubber, Ethylene Propylene Rubber and Isobutylene Isoprene Rubber

The Human race of our century is in gluttonous search for novel engineering products which led to a skyrocketed progress in research and fabrication of filled polymers. Recently, a big window has been opened up for speciality polymers especially elastomers with promising properties. Among the many reasons why rubbers are widely used in the process industries, three are considered as important. Firstly, rubbers operate in a variety of environments and possess usable ranges of deformity and durability and can be exploited through suitable and more or less conventional equipment design principles. Secondly, rubber is an eminently suitable construction material for protection against corrosion in the chemical plant and equipment against various corrosive chemicals as, acids and alkalies and if property tailored, can shield ionising radiations as X-rays and gamma rays in medical industry, with minimum maintenance lower down time, negligible corrosion and a preferred choice for aggressive corroding and ionising environment. Thirdly, rubber can readily and hastily, and at a relatively lower cost, be converted into serviceable products, having intricate shapes and dimensions. In a century’s gap, large employment of flexible polymer materials in the different segments of industry has stimulated the development of new materials with special properties, which paved its way to the synthesis of various nanoscale materials. At nano scale, one makes an entry into a world where multidisciplinary sciences meet and utilises the previously unapproached infinitesimal length scale, having dimension which measure upto one billionth of a meter, to create novel properties. The nano fillers augment the elastomers properties in an astonishing fashion due to their multifunctional nature and unprecedented properties have been exhibited by these polymer-nanocomposites just to beat the shortcomings of traditional micro composites. The current research aims to investigate the possibility of using synthesised nano barium sulphate for fabricating elastomer-based nanocomposites and thereby imparting several properties to the rubber. In this thesis, nano materials, their synthesis, structure, properties and applications are studied. The properties of barium sulphate like chemical resistance and radiopacity have been utilized in the present study and is imparted to the elastomers by preparing composites