Lamellarin D bioconjugates II: synthesis and cellular internalization of dendrimer and nuclear location signal derivatives

The design and synthesis of Lamellarin D conjugates with a nuclear localization signal peptide and a poly(ethylene glycol)-based dendrimer are described. Conjugates 1-4 were obtained in 8-84% overall yields from the corresponding protected Lamellarin D. Conjugates 1 and 4 are 1.4 to 3.3-fold more cytotoxic than the parent compound against three human tumor cell lines(MDA-MB-231 breast, A-549 lung, and HT-29 colon). Besides, conjugates 3, 4 showed a decrease in activity potency in BJ skin fibroblasts, a normal cell culture. Cellular internalization was analyzed and nuclear distribution pattern was observed for 4, which contains a nuclear localization signalling sequence.

Creative Industries: a Preliminary Insight to their Location Determinants

This paper is about location decisions of Creative Industries and the role played by existent spatial distribution and agglomeration economies of these kinds of activities in order to analyse their location determinants. Our main statistical source is the REIC (Catalan Manufacturing Establishments Register), which has plant-level microdata on location of new plants. Using Count Data Models, our main results show that location determinants are quite similar between both industries and also both non-creative and creative firms are positively influenced by the specialisation level in Creative Industries of municipalities. Moreover, our results provide evidence that the unobserved ‘creative milieu’ has a limited impact on attracting firms. Keywords: creative industries, creative milieu, count data models, industrial location, agglomeration economies

Aerosol particle size distributions at a traffic exposed site and an urban background location in Oporto, Portugal

Aerosol size distributions from 6 to 700 nm were measured simultaneously at an urban background site and a roadside station in Oporto. The particle number concentration was higher at the traffic exposed site, where up to 90% of the size spectrum was dominated by the nucleation mode. Larger aerosol mode diameters were observed in the urban background site possibly due to the coagulation processes or uptake of gases during transport. Factor analysis has shown that road traffic and the neighbour stationary sources localised upwind affect the urban area thought intra-regional pollutant transport.

Defining the location factors of new manufacturing site in chemical industry

The objective of this thesis is to examine the factors that have an impact on the location decision of new manufacturing site and to create the relative order of importance of these factors by analytic hierarchy process (AHP). The decision making process especially related to the location selection and the measurement of the location factors are also examined. In theoretical part the character of decision making process and the relevant methods are introduced. Based on the previous studies of other researchers, the location factors are examined and the main research method, analytic hierarchy process, is also introduced. The empirical part of the study mainly follows the phases of decision making process and is emphasized on the main stages of analytic hierarchy process; building the hierarchy, defining the priorities and analyzing the results. The hierarchy is constructed from seven main criteria which all have several sub criteria. The evaluation of the hierarchy is implemented at the group decision making –laboratory and there can be seen significant differences between the importance of criteria. The final stage in the study is to create the appropriate measurement scales to the chosen criteria.

Determining the location for a mobile device by utilization of local resources of the environment

The subject being analyzed of this Master’s Thesis is a development of a service that is used to define a current location of a mobile device. The service utilized data that is obtained from own GPS receiver in some possible cases and as well data from mobile devices which can be afforded for the current environment for acquisition of more precise position of the device. The computation environment is based on context of a mobile device. The service is implemented as an application for communicator series Nokia N8XX. The Master’s Thesis presents theoretical concept of the method and its practical implementation, architecture of the application, requirements and describes a process of its functionality. Also users’ work with application is presented and recommendations for possible future improvements are made.

Soil chiseling and fertilizer location in sugarcane ratoon cultivation

While the pre-harvest sugarcane burning is a disused practice, green harvest requires changes concerning ratoon cultivation due to the presence of a thick layer of straw. The experiment, conducted in a mechanical green harvesting area cultivated with sugarcane, consisted of two stages: in the first stage, the mechanical straw cutting performance of flat disks with different geometry edges was evaluated, considering two types of disks and 10 replications in a completely randomized design; in the second stage, the effect of soil chiseling on both sides of planting lines, using shanks with straw cutting flat disks, was assessed, as well as fertilizer deposition form. The experimental design in the second stage was completely randomized, with seven treatments and five replications. Treatments consisted of a combination of two straw cutting disks (smooth or toothed edge), chiseling presence or absence, and fertilizer deposition forms (broadcast, on the planting line, and incorporated into chiseling furrows). The toothed disk differed from the smooth one, presenting lower values of horizontal and vertical forces, and torque. The agroindustrial variables pol (%), brix (%), fiber (%), and ATR (kg Mg-1) were not influenced by the fertilizer deposition form and soil chiseling. However, the localized fertilizer deposition increased crop yield when compared with broadcast fertilization.

Strategic outsourcing of R&D: The location-specific advantages of India to the pharmaceutical industry

Companies are increasingly under pressure to be more efficient both in terms of costs and overall performance and thus, they seek new ways to develop their products and innovate. For pharmaceutical industry it can take several decades to launch a new drug to the markets. Since pharmaceutical industry is one of the most research-intensive industries, is outsourcing one way to enhance the R&D processes of such companies. It is said that outsourcing to offshore locations is vastly more challenging and complicated than any other exporting activity or inter-company relationship that has evoked a lot of discussion. By outsourcing strategically, companies must also thoroughly focus on transaction costs and core competences. Today, the suppliers are looked for beyond national boundaries and furthermore, the location of the outsourcing activity must also be thoroughly considered. Consequently, the purpose of this study is to analyze what is known of strategic outsourcing of pharmaceutical R&D to India. In order to meet the purpose of the study, this study tries to answer three sub-questions set to it: first, what is strategic outsourcing, second, why pharmaceutical companies utilize strategic outsourcing of R&D and last, why pharmaceutical companies select India as the location for outsourcing their R&D. The study is a qualitative study. The purpose of the study was approached by a literature review with systematic elements and sub-questions were analyzed through different relevant theories, such as theory of transaction costs, core competences and location advantages. Applicable academic journal articles were comprehensively included in the study. The data was collected from electronic journal article databases using key words and almost only peer-reviewed, as new as possible articles were included. Also both the reference list of the included articles and article recommendations from professionals generated more articles for inclusion. The data was analyzed through thematization that resulted in themes that illuminate the purpose of the study and sub-questions. As an outcome of the analysis, each of the theory chapters in the study represents one sub-question. The literature used in this study revealed that strategic outsourcing of R&D is increasingly used in pharmaceutical industry and the major motives to practice it has to do with lowering costs, accessing skilled labor, resources and knowledge and enhancing their quality while speeding up the introduction of new drugs. Mainly for the above-mentioned motives India is frequently chosen as the target location for pharma outsourcers. Still, the literature is somewhat incomplete in this complex phenomenon and more research is needed.

The effects of location, feedstock availability, and supply-chain logistics on the greenhouse gas emissions of forest-biomass energy utilization in Finland

Forest biomass represents a geographically distributed feedstock, and geographical location affects the greenhouse gas (GHG) performance of a given forest-bioenergy system in several ways. For example, biomass availability, forest operations, transportation possibilities and the distances involved, biomass end-use possibilities, fossil reference systems, and forest carbon balances all depend to some extent on location. The overall objective of this thesis was to assess the GHG emissions derived from supply and energy-utilization chains of forest biomass in Finland, with a specific focus on the effect of location in relation to forest biomass’s availability and the transportation possibilities. Biomass availability and transportation-network assessments were conducted through utilization of geographical information system methods, and the GHG emissions were assessed by means of lifecycle assessment. The thesis is based on four papers in which forest biomass supply on industrial scale was assessed. The feedstocks assessed in this thesis include harvesting residues, smalldiameter energy wood and stumps. The principal implication of the findings in this thesis is that in Finland, the location and availability of biomass in the proximity of a given energyutilization or energy-conversion plant is not a decisive factor in supply-chain GHG emissions or the possible GHG savings to be achieved with forest-biomass energy use. Therefore, for the greatest GHG reductions with limited forest-biomass resources, energy utilization of forest biomass in Finland should be directed to the locations where most GHG savings are achieved through replacement of fossil fuels. Furthermore, one should prioritize the types of forest biomass with the lowest direct supply-chain GHG emissions (e.g., from transport and comminution) and the lowest indirect ones (in particular, soil carbon-stock losses), regardless of location. In this respect, the best combination is to use harvesting residues in combined heat and power production, replacing peat or coal.

Evaluation of Location Intelligence exploitation in capital-intensive business

As technology has developed it has increased the number of data produced and collected from business environment. Over 80% of that data includes some sort of reference to geographical location. Individuals have used that information by utilizing Google Maps or different GPS devices, however such information has remained unexploited in business. This thesis will study the use and utilization of geographically referenced data in capital-intensive business by first providing theoretical insight into how data and data-driven management enables and enhances the business and how especially geographically referenced data adds value to the company and then examining empirical case evidence how geographical information can truly be exploited in capital-intensive business and what are the value adding elements of geographical information to the business. The study contains semi-structured interviews that are used to scan attitudes and beliefs of an organization towards the geographic information and to discover fields of applications for the use of geographic information system within the case company. Additionally geographical data is tested in order to illustrate how the data could be used in practice. Finally the outcome of the thesis provides understanding from which elements the added value of geographical information in business is consisted of and how such data can be utilized in the case company and in capital-intensive business.

Facilitatory effects of an auditory warning stimulus in a visual location identification task and a visual shape identification task

The occurrence of a weak auditory warning stimulus increases the speed of the response to a subsequent visual target stimulus that must be identified. This facilitatory effect has been attributed to the temporal expectancy automatically induced by the warning stimulus. It has not been determined whether this results from a modulation of the stimulus identification process, the response selection process or both. The present study examined these possibilities. A group of 12 young adults performed a reaction time location identification task and another group of 12 young adults performed a reaction time shape identification task. A visual target stimulus was presented 1850 to 2350 ms plus a fixed interval (50, 100, 200, 400, 800, or 1600 ms, depending on the block) after the appearance of a fixation point, on its left or right side, above or below a virtual horizontal line passing through it. In half of the trials, a weak auditory warning stimulus (S1) appeared 50, 100, 200, 400, 800, or 1600 ms (according to the block) before the target stimulus (S2). Twelve trials were run for each condition. The S1 produced a facilitatory effect for the 200, 400, 800, and 1600 ms stimulus onset asynchronies (SOA) in the case of the side stimulus-response (S-R) corresponding condition, and for the 100 and 400 ms SOA in the case of the side S-R non-corresponding condition. Since these two conditions differ mainly by their response selection requirements, it is reasonable to conclude that automatic temporal expectancy influences the response selection process.