Safety climate and its relationship with furniture companies’ safety performance and workers’ risk acceptance

This study aims to analyse the relationship between safety climate and the level of risk acceptance, as well as its relationship with workplace safety performance. The sample includes 14 companies and 403 workers. The safety climate assessment was performed by the application of a Safety Climate in Wood Industries questionnaire and safety performance was assessed with a checklist. Judgements about risk acceptance were measured through questionnaires together with four other variables: trust, risk perception, benefit perception and emotion. Safety climate was found to be correlated with workgroup safety performance, and it also plays an important role in workers’ risk acceptance levels. Risk acceptance tends to be lower when safety climate scores of workgroups are high, and subsequently, their safety performance is better. These findings seem to be relevant, as they provide Occupational, Safety and Health practitioners with a better understanding of workers’ risk acceptance levels and of the differences among workgroups.

Safety and immunogenicity of hepatitis B vaccine ButaNG in adults

Recombinant yeast-derived hepatitis B vaccine manufactured by Instituto Butantan was administered in two groups of adult volunteers (I, II) following two different schedules of immunization. In the first trial (10 mg doses and 0, 1, 3 months vaccination schedule) 106 individuals completed the full immunization program. The results of seroconversion by age group varied from 70 to 100% and the GMT from 46.5 to 124.9 mIU mL-1. In the second trial with 68 individuals (for dosage comparison and 0, 1, 6 months vaccination schedule) indicated that the vaccine formulated in 20 mg was more effective than in 10 mg. The adverse reactions observed in the vaccinees were less frequent than the ones previously found since the introduction of similar vaccines.

Desenvolvimento de ferramentas BIM no âmbito do cálculo estrutural em situação de incêndio

Este trabalho insere-se no âmbito de um estágio curricular realizado no gabinete de projetos SE2P, durante o qual foram desenvolvidas ferramentas de cálculo estrutural em situação de incêndio, integradas numa metodologia de trabalho que segue os princípios inerentes à tecnologia BIM (Building Information Modeling). Em particular foi implementado um procedimento de análise ao fogo segundo os modelos simplificados prescritos pelos Eurocódigos. Estes modelos garantem a segurança estrutural, permitindo, de forma rápida e eficiente, a determinação das necessidades de proteção passiva para diferentes cenários, tendo em vista a obtenção da solução mais económica. Esta dissertação, para além da apresentação do trabalho desenvolvido em regime de estágio curricular, objetivou dotar o leitor de um documento que introduza os principais conceitos relativos ao cálculo estrutural em situação de incêndio, indicando as várias opções de análise e respetivas vantagens e desvantagens, ajudando a definir a sua adequabilidade ao projeto em estudo. Neste contexto é efetuada uma introdução geral ao fenómeno do fogo e às medidas mais correntes de proteção, indicando-se os documentos normativos aplicáveis tanto ao cálculo estrutural como aos materiais de proteção. É também abordada a interação entre as várias normas que devem ser consultadas quando é efetuada uma análise ao fogo, e quais se aplicam a cada fase da análise. Efetua-se uma clara distinção entre a análise do comportamento térmico e mecânico, indicando-se as principais propriedades dos materiais em função do tipo de análise e a forma como são afetadas pela temperatura. No campo da análise do comportamento térmico faz-se essencialmente referência aos modelos de cálculo simplificados do desenvolvimento da temperatura em elementos metálicos e vigas mistas, com e sem proteção passiva. No que concerne ao campo da análise do comportamento mecânico são descritos os modelos de cálculo simplificados para a verificação da segurança estrutural atendendo às ações e combinações em situação de incêndio e à perda de resistência a temperaturas elevadas. Relativamente ao trabalho desenvolvido na SE2P, relativo ao desenvolvimento de ferramentas de cálculo e a sua implementação na análise ao fogo, realiza-se uma descrição detalhada de todo o processo, e da forma como se integra no conceito BIM, utilizando informações provenientes da modelação das estruturas e introduzindo novos dados ao modelo. Realizou-se também a aplicação de todo o procedimento de análise e das ferramentas desenvolvidas, a um caso de estudo baseado num edifício de habitação. Este caso de estudo serviu também para criar cenários de otimização utilizando-se referências de preços de mercado para o aço, sua transformação em fábrica e sistemas de proteção passiva, demonstrando-se a dificuldade em encontrar caminhos rápidos e diretos de decisão no processo de otimização.

The patient safety journey in Portugal : challenges and opportunities from a public health perspective

ABSTRACT - Despite improvements in healthcare interventions, the incidence of adverse events and other patient safety problems constitutes a major contributor to the global burden of diseases and a concern for Public Health. In the last years there have been some successful individual and institutional efforts to approach patient safety issues in Portugal, unless such effort has been fragmented or focused on specific small areas. Long-term and global improvement has remained elusive, and most of all the improvement of patient safety in Portugal, must evaluate not only the efficacy of a change but also what was effective for implementing the change. Clearly, patient safety issues result from various combinations of individual, team, organization, system and patient factors. A systemic and integrated approach to promote patient safety must acknowledge and strive to understand the complexity of work systems and processes in health care, including the interactions between people, technology, and the environment. Safety errors cannot be productively attributed to a single human error. Our objective with this paper is to provide a brief overview of the status quo in patient safety in Portugal, highlighting key aspects that should be taken into account in the design of a strategy for improving patient safety. With these key aspects in mind, policy makers and implementers can move forward and make better decisions about which changes should be made and about the way the needed changes to improve patient safety should be implemented. The contribution of colleagues that are international leaders on healthcare quality and patient safety may also contribute to more innovative research methods needed to create the knowledge that promotes less costly successful changes.---- ---------------------- RESUMO – As questões relacionadas com a Segurança do Doente, e em particular, com a ocorrência de eventos adversos tem constituído, de há uns tempos a esta parte, uma crescente preocupação para as organizações de saúde, para os decisores políticos, para os profissionais de saúde e para os doentes/utentes e suas famílias, sendo por isso considerado um problema de Saúde Pública a que urge dar resposta. Em Portugal, nos últimos anos, têm sido desenvolvidos esforços baseados, maioritariamente, em iniciativas isoladas, para abordar os aspectos da Segurança do Doente. O facto de essas iniciativas não serem integradas numa estratégia explícita e de dimensão regional ou nacional, faz com que os resultados sejam parcelares e tenham visibilidade reduzida. Paralelamente, a melhoria da qualidade dos cuidados de saúde (a longo prazo) resultante dessas iniciativas tem sido esparsa e nem sempre a avaliação tem sido feita tendo em conta critérios de efectividade e de eficiência. A Segurança do Doente resulta da interacção de diversos factores relacionados, por um lado, com o doente e, por outro, com a prestação de cuidados que envolvem elementos de natureza individual (falhas activas) e organizacional/estrutural (falhas latentes). Devido à multifactorialidade que está na base de «problemas/falhas» na Segurança do Doente, qualquer abordagem a considerar deve ser sistémica e integrada. Simultaneamente, tais abordagens devem contemplar a compreensão da complexidade dos sistemas e dos processos de prestação de cuidados de saúde e as suas interdependências (envolvendo aspectos individuais, tecnológicos e ambientais). O presente trabalho tem por objectivo reflectir sobre o «estado da arte» da Segurança do Doente em Portugal, destacando os elementos-chave que se consideram decisivos para uma estratégia de acção nesse domínio. Com esses elementos os responsáveis pela governação da saúde poderão valorizar os aspectos que consideram decisivos para uma política de Segurança do Doente mais eficaz. A contribuição de quatro colegas internacionalmente reconhecidos como líderes na área da Qualidade em Saúde e da Segurança do Doente, constitui, por certo, uma oportunidade ímpar para a identificação e discussão de alguns dos principais desafios, ameaças e oportunidades que s

A Novel Run-Time Monitoring Architecture for Safe and Efficient Inline Monitoring

20th International Conference on Reliable Software Technologies - Ada-Europe 2015 (Ada-Europe 2015), Madrid, Spain.

Formal Contracts for Runtime Verification Support in the Ada Programming Language

Poster presented in The 28th GI/ITG International Conference on Architecture of Computing Systems (ARCS 2015). 24 to 26, Mar, 2015. Porto, Portugal.

Reclamações, nova metodologia de avaliação do risco clínico

RESUMO - A OMS estima que dezenas de milhares de doentes em todo o mundo sofrem consequências ou morrem devido a cuidados e práticas médicas pouco seguras (JHA, A., ed. lit., 2008). Este estudo surge com o intuito de gerar conhecimento acerca dos EA e promover a melhoria da gestão do risco com base na perspectiva do doente, obtida através das reclamações. As reclamações contêm informação primordial acerca das necessidades reais, manifestas e sentidas pelo doente e as pessoas que lhes estão próximas (familiares, cuidadores informais). Elas podem reportar EA e constituir um veículo importante da melhoria da qualidade. O objectivo geral do estudo é contribuir para a melhoria da qualidade dos serviços de saúde, particularmente no que diz respeito à melhoria da segurança do doente. Para tal, será desenvolvida metodologia de análise de reclamações, para avaliação da ocorrência de EA. O instrumento de colheita de dados consiste numa checklist de verificação de variáveis, para posterior caracterização e realização de testes estatísticos. ----------ABSTRACT - The WHO estimate that tens of thousands customers around the world suffer or die due to Care and unsafe medical practices consequences (JHA, A., ed. lit., 2008). The aim of this research is to generate knowledge about the adverse events and promote the improvement of risk management based on patient perspective, obtained through complaints. Claims/Complaints contain vital information about the real needs, perceived and manifest by the patient and those close to them (families, informal caregivers). They can report adverse events and provide an essential vehicle to quality improvement. The study overall objective is to contribute to health services quality improvement, particularly as regard to improving the patient safety. For this will be developed methodology of complaints analysis, to adverse events occurrence assessment. The instrument for data collect consists in a checklist to variables verification toward further characterizati

A New Electronic Approach for the Surgical Safety Checklist

To improve surgical safety, and to reduce the mortality and surgical complications incidence, the World Health Organization (WHO) developed the Surgical Safety Checklist (SSC). The SSC is a support of information that aids health professionals to reduce the number of complications, induction of anaesthesia, period before skin incision and period before leaving the operating room (OR). The SSC was tested in several countries of the world and their results shown that after introduction of the SSC the incidence of patient complication lowered from 11.0% to 7.0% (P<0.001), the rate of death declined from 1.5% to 0.8% (P = 0.003) and the nurses recognized that patients identity was more often con rmed (81.6% to 94.2%, P<0.01) in many institutions. Recently the SSC was also implemented in Portuguese hospitals, which led us to its study in the real clinical environment. An observational study was performed: several health professionals were observed and interviewed, to understand the functioning of the SSC in an OR, during the clinical routine. The objective of this study was to understand the current use of the SSC, and how it may be improved in terms of usability, taking advantage of the technological advancements such as mobile applications. During two days were observed 14 surgeries, only 2 surgeries met the requirements for the three phases of the SSC, as de ned by the WHO. Of the remaining 12 observed surgeries, 9 surgeries completed the last phase at the correct time. It was also observed that only in 2 surgeries all the phases of the SSC were read aloud to the team and that, in 7 surgeries, several items were read aloud and answered but no one was checking the SSC, only after the end of the phase. The observational study results disclose that several health professionals do not meet with rules of the WHO manual. This study demonstrates that it is urgent to change the mindset of health professionals, and that di erent features in the SSC may be useful to make it more easy to use. With the results of the observational study, a SSC application proposal was developed with new functionalities to improve and aid the health professional in its use. In this application the user can chose between a SSC already created to a speci c surgery or to create a new SSC, adding and adapting some questions from the WHO standard. To create a new SSC, the application is connected to an online questionnaire builder (JotForm). The choice for this online questionnaire builder went through three essential characteristics: number of types of questions, mainly checkbox, radio button and text; the possibility of to create sections inside sections and the API. In addition, in this proposal the improvements are focused in forcing the user to focus in the work ow of the SSC and to save the input timestamps and any actions made by them. Therefore, the following features was implemented to achieve that goal: display one item of the SSC at a time; display the stage where the SSC is; do not allow going back to the previous step; do not allow going forward to the next item if the current is not lled; do not allow going forward to the next item if the time it took to ll the item was too short and log any action made by the user.

Run-time Monitoring Architecture for RealTime Systems

Presented at INForum - Simpósio de Informática (INFORUM 2015). 7 to 8, Sep, 2015. Portugal.

Multilevel model of safety climate for furniture industries

BACKGROUND: Furniture companies can analyze their safety status using quantitative measures. However, the data needed are not always available and the number of accidents is under-reported. Safety climate scales may be an alternative. However, there are no validated Portuguese scales that account for the specific attributes of the furniture sector. OBJECTIVE: The current study aims to develop and validate an instrument that uses a multilevel structure to measure the safety climate of the Portuguese furniture industry. METHODS: The Safety Climate in Wood Industries (SCWI) model was developed and applied to the safety climate analysis using three different scales: organizational, group and individual. A multilevel exploratory factor analysis was performed to analyze the factorial structure. The studied companies’ safety conditions were also analyzed. RESULTS: Different factorial structures were found between and within levels. In general, the results show the presence of a group-level safety climate. The scores of safety climates are directly and positively related to companies’ safety conditions; the organizational scale is the one that best reflects the actual safety conditions. CONCLUSIONS: The SCWI instrument allows for the identification of different safety climates in groups that comprise the same furniture company and it seems to reflect those groups’ safety conditions. The study also demonstrates the need for a multilevel analysis of the studied instrument.

Monte Carlo simulations for dosimetric verification in photon and electron beam radiotherapy

Dissertação para obtenção do Grau de Doutor em Engenharia Biomédica

Safety and skin delayed-type hypersensitivity response in vervet monkeys immunized with Leishmania donovani sonicate antigen delivered with adjuvants

In this study, we report on the safety and skin delayed-type hypersensitivity (DTH), responses of the Leishmania donovani whole cell sonicate antigen delivered in conjunction with alum-BCG (AlBCG), Montanide ISA 720 (MISA) or Monophosphoryl lipid A (MPLA) in groups of vervet monkeys. Following three intradermal injections of the inoculums on days 0, 28 and 42, safety and DTH responses were assessed. Preliminary tumor necrosis factor alpha (TNF-α) and interferon gamma (IFN-γ) levels were also measured and these were compared with DTH. Only those animals immunized with alum-BCG reacted adversely to the inoculum by producing ulcerative erythematous skin indurations. Non-parametric analysis of variance followed by a post-test showed significantly higher DTH responses in the MISA+Ag group compared with other immunized groups (p < 0.001). The MPLA+Ag group indicated significantly lower DTH responses to the sonicate antigen compared with the AlBCG+Ag group. There was a significant correlation between the DTH and cytokine responses (p < 0.0001). Based on this study we conclude that Leishmania donovani sonicate antigen containing MISA 720 is safe and is associated with a strong DTH reaction following immunization.

In situ measured cross section geometry of old timber structures and its influence on structural safety

Old timber structures may show significant variation in the cross section geometry along the same element, as a result of both construction methods and deterioration. As consequence, the definition of the geometric parameters in situ may be both time consuming and costly. This work presents the results of inspections carried out in different timber structures. Based on the obtained results, different simplified geometric models are proposed in order to efficiently model the geometry variations found. Probabilistic modelling techniques are also used to define safety parameters of existing timber structures, when subjected to dead and live loads, namely self-weight and wind actions. The parameters of the models have been defined as probabilistic variables, and safety of a selected case study was assessed using the Monte Carlo simulation technique. Assuming a target reliability index, a model was defined for both the residual cross section and the time dependent deterioration evolution. As a consequence, it was possible to compute probabilities of failure and reliability indices, as well as, time evolution deterioration curves for this structure. The results obtained provide a proposal for definition of the cross section geometric parameters of existing timber structures with different levels of decay, using a simplified probabilistic geometry model and considering a remaining capacity factor for the decayed areas. This model can be used for assessing the safety of the structure at present and for predicting future performance.

Safety function analysis in an industrial production process

Dissertação para obtenção do Grau de Mestre em Engenharia e Gestão Industrial