938 resultados para S2-01
Resumo:
In a greenhouse pot experiment with kohlrabi, variety Luna, we explored the joint effect of N (0.6 g N per pot = 6 kg of soil) and S in the soil (25-35-45 mg kg-1 of S) on yields, on N, S and NO3- content in tubers and leaves, and on alterations in the amino acids concentration in the tubers. S fertilisation had no effect on tuber yields. The ranges of N content in tubers and leaves were narrow (between 1.42-1.48 % N and 1.21-1.35 % N, respectively) and the effect of S fertilisation was insignificant. S concentration in the tubers ranged between 0.59 and 0.64 % S. S fertilisation had a more pronounced effect on the S concentration in leaf tissues where it increased from 0.50 to 0.58 or to 0.76 % S under the applied dose. The NO3- content was higher in tubers than in leaves. Increasing the S level in the soil significantly reduced NO3- concentrations in the tubers by 42.2-53.6 % and in the leaves by 8.8-21.7 %. Increasing the S content in the soil reduced the concentration of cysteine + methionine by 16-28 %. The values of valine, tyrosine, aspartic acid and serine were constant. In the S0, S1, and S2 treatments the levels of threonine, isoleucine, leucine, arginine, the sum of essential amino acids and alanine decreased from 37 to 9 %. The histidine concentration increased with increasing S fertilisation. S fertilisation of kohlrabi can be recommended to stabilize the yield and reduce the undesirable NO3- contained in the parts used for consumption.
Resumo:
A cama de frango constitui-se em adubo orgânico com boas características agronômicas, podendo ser bom condicionador das propriedades físicas do solo. Assim, o objetivo deste trabalho foi verificar alterações nas propriedades do solo em sistemas de plantio direto com adição de cama de frango. O estudo foi feito em três camadas (0-10, 10-20 e 20-30 cm) e três repetições, em Latossolo Vermelho-Amarelo distrófico submetido a plantio direto contínuo nos últimos anos, com rotação principalmente de soja, milho, algodão e milheto. Os tratamentos foram: sistema com adubação mineral (S2), com adição de cama de frango crua (S3), com adição de cama de frango compostada (S4) e uma área não manejada de Cerrado nativo (S1). Os sistemas de manejo induziram em ordem crescente - S4, S2, S3 - à degradação dos atributos do solo em relação à vegetação nativa (S1), e isso foi quantificado pelos menores valores de carbono total, diâmetro e estabilidade de agregados, macroporosidade e condutividade hidráulica saturada e pelos maiores valores de densidade e resistência do solo à penetração e microporosidade. A cama de frango crua revelou-se mais vantajosa na disponibilidade de nitrogênio total e menos eficiente em garantir a qualidade física do solo. A cama de frango compostada proporcionou atributos mais semelhantes às condições naturais.
Resumo:
A large variety of techniques have been used to measure soil CO2 released from the soil surface, and much of the variability observed between locations must be attributed to the different methods used by the investigators. Therefore, a minimum protocol of measurement procedures should be established. The objectives of this study were (a) to compare different absorption areas, concentrations and volumes of the alkali trapping solution used in closed static chambers (CSC), and (b) to compare both, the optimized alkali trapping solution and the soda-lime trapping using CSC to measure soil respiration in sugarcane areas. Three CO2 absorption areas were evaluated (7; 15 and 20 % of the soil emission area or chamber); two volumes of NaOH (40 and 80 mL) at three concentrations (0.1, 0.25 and 0.5 mol L-1). Three different types of alkaline traps were tested: (a), 80 mL of 0.5 mol L-1 NaOH in glass containers, absorption area 15 % (V0.5); (b) 40 mL of 2 mol L-1 NaOH retained in a sponge, absorption area 80 % (S2) and (c) 40 g soda lime, absorption area 15 % (SL). NaOH concentrations of 0.5 mol L-1 or lower underestimated the soil CO2-C flux or CO2 flux. The lower limit of the alkali trap absorption area should be a minimum of 20 % of the area covered by the chamber. The 2 mol L-1 NaOH solution trap (S2) was the most efficient (highest accuracy and highest CO2 fluxes) in measuring soil respiration.
Resumo:
A espectroscopia de raios-X por reflexão total (TXRF) é uma técnica promissora para análise de elementos-traço (ETs), principalmente por não ser necessária a digestão das amostras, reduzindo assim a geração de resíduos e emissão de vapores tóxicos. Este trabalho comparou os teores dos ETs: Cr, Mn, Ni, Zn, Cu, As, Se, Hg e Pb, coletados em solos de área de agricultura intensiva e vegetação nativa, determinados por TXRF e por espectrometria de absorção atômica de chama ou forno de grafite (FAAS/GFAAS). Adicionalmente, compararam-se os teores dos ET com valores de referência para solos não contaminados. As amostras de solo foram coletadas na profundidade 0,0-0,2 m em municípios representativos de cada região agrícola do Estado de Mato Grosso (Rondonópolis, Alto Garça, Primavera do Leste, Campo Novo, Nova Mutum, Lucas do Rio Verde, Sorriso, Sinop, Campo Novo dos Parecis, Campos de Julho e Vila Bela da Santíssima Trindade). Em cada município, foram selecionadas seis áreas, totalizando 72 amostras, todas georreferenciadas. Para a leitura dos teores de ET no aparelho de TXRF S2 Picofox™, foram preparadas suspensões de solo usando Triton X-100 a 5 % v/v utilizando gálio como padrão interno, enquanto no FAAS/GFAAS as amostras foram submetidas à digestão ácida pelo método 3051A. Considerando área cultivada e área nativa, respectivamente, os teores médios dos ET por TXRF, em mg kg-1, foram: Cr, 69 e 62; Zn, 16 e 8; Pb, 28 e 21; Mn, 56 e 42; As, 2 e 2; Cu, 9 e 8; e Ni, 2 e 2. O Cd, Se e Hg não foram detectados por TXRF nas amostras analisadas. Para As, Cr, Mn, Zn, Ni, Cu e Pb, houve correlação linear (p<0,001) positiva entre as técnicas e, no geral, os teores obtidos para esses ET em TXRF foram superiores aos do FAAS/GFAAS. Os teores de todos os elementos detectados pelo TXRF, exceto o Cr, estão dentro das faixas dos relatados para solos não contaminados e muito inferiores aos limites de alerta estipulados na literatura.
Resumo:
The Federal Highway Administration (FHWA) and the Iowa and Illinois Departments of Transportation (Iowa DOT and IDOT) have identified the Selected Alternative for improving Interstate 74 (I-74) from its southern terminus at Avenue of the Cities (23rd Avenue) in Moline, Illinois to its northern terminus one mile north of the I-74 interchange with 53rd Street in Davenport, Iowa. The Selected Alternative identified and discussed in this Record of Decision is the preferred alternative identified in the Final Environmental Impact Statement (FEIS). The purpose of the proposed improvements is to improve capacity, travel reliability, and safety along I-74 between its termini, and provide consistency with local land use planning goals. The need for the proposed improvements to the I-74 corridor is based on a combination of factors related to providing better transportation service and sustaining economic development.
Resumo:
En muchas ocasiones, el conocimiento y la importancia de los grandes yacimientos arqueológicos son dos conceptos diferentes. La adecuación museográfica y las referencias específicas a materiales o intervenciones puntuales pueden enmascarar el valor real de los datos científicos que se conocen sobre ellos, limitando así su importancia dentro del conjunto de la información necesaria para la realización de síntesis y el conocimiento exhaustivo de un período histórico. En muchos casos, se añade la prolongación en el tiempo de excavaciones e intervenciones de consolidación cuyos resultados tardan en ser publicados o bien no llegan nunca a ver la luz, por lo que permanecen en los intrincados vericuetos del circuito científico, quedando como referencias de transmisión personal y provocando innecesarios vacíos en el conocimiento.
Resumo:
Many of the bridges in the state of Iowa have type ‘CF’, ‘EE’, or ‘EF’ expansion joints installed in the bridge approach slabs. These joints, which are typically 4” wide, are currently filled with a foam expansion joint material that is covered with a sealant. Over time the sealant begins to pull off of the walls of the joint and it ultimately fails. The joint, which is now exposed to the weather, is then filled with water and solids. The foam joint material, which is lighter than water, floats out of the joint onto the highway. This foam resembles a large 4” X 6” plank and poses a threat to motorists. A possible solution to this problem would be to replace the foam material with rubber buffings. Rubber buffings are a by-product of the tire retread industry.
Resumo:
The Iowa State Highway Commission purchased a Conrad automatic freeze and thaw machine and placed it in operation during October 1961. There were a few problems, but considering, the many electrical and mechanical devices used in the automatic system it has always functioned quite well. Rapid freezing and thawing of 4"x4"xl8" concrete beams has been conducted primarily in accordance with ASTM C-29l (now ASTM C-666 procedure B) at the rate of one beam per day. Over 4000 beams have been tested since 1961, with determination of the resulting durability factors. Various methods of curing were used and a standard 90 day moist cure was selected. This cure seemed to yield durability factors that correlated very well with ratings of coarse aggregates based on service records. Some concrete beams had been made using the same coarse aggregate and the durability factors compared relatively well with previous tests. Durability factors seemed to yield reasonable results until large variations in durability factors were noted from beams of identical concrete mix proportions in research projects R-234 and R-247. This then presents the question "How reliable is the durability as determined by ASTM C-666?" This question became increasingly more important when a specification requiring a minimum durability factor for P.C. concrete made from coarse aggregates was incorporated into the 1972 Standard Specification for coarse aggregates for concrete.
Resumo:
O objetivo deste trabalho foi avaliar o emprego do delineamento em blocos aumentados e de métodos de análise espacial nas etapas iniciais dos programas de melhoramento do feijoeiro (Phaseolus vulgaris L.). Foram avaliadas 121 famílias S2, provenientes de um programa de seleção recorrente, em três locais: Lavras, Lambari e Patos de Minas. Utilizou-se um látice simples 11 x 11, por local. Adicionalmente, foram incluídas duas testemunhas, Carioca e EMGOPA201-Ouro, cada uma alocada a intervalos regulares de cinco em cinco parcelas em cada bloco. A parcela foi composta por duas linhas de dois metros, com 15 sementes por metro. Os dados de produção de grãos (g/parcela) foram submetidos a uma análise de variância considerando os seguintes delineamentos e métodos: látice, blocos aumentados, blocos ao acaso, método de Papadakis, método das médias móveis e testemunha intercalar. Realizou-se a comparação entre as diferentes estratégias quanto à eficiência no controle do erro experimental e em relação à precisão das estimativas de parâmetros genéticos e fenotípicos obtidas em cada método. Constatou-se que o emprego do delineamento em blocos aumentados é viável para a seleção de famílias nas etapas iniciais dos programas de melhoramento genético, principalmente se for aplicada uma intensidade de seleção moderada; porém, esse delineamento não se mostrou apropriado para a estimação de parâmetros genéticos e fenotípicos, em virtude da baixa precisão das estimativas; o uso de testemunha intercalar não proporcionou melhoria na precisão experimental; os métodos de análise de vizinhança, Papadakis e o das médias móveis, foram eficientes no controle da heterogeneidade dos blocos, sendo esta eficiência similar àquela proporcionada pela análise em látice.