Síntese geológica e geocronológica do Cráton São Luís e do Cinturão Gurupi na região do Rio Gurupi (NE-Pará / NW-Maranhão)

A região do Gurupi, na fronteira norte dos estados do Pará e Maranhão, é historicamente dividida em dois domínios geocronológicos (Rb-Sr, K-Ar): um paleoproterozóico (Cráton São Luís), outro neoproterozóico (Cinturão Gurupi). Dados geocronológicos em zircão (evaporação de Pb), recentemente disponibilizados, além de dados inéditos aqui apresentados, contemplam a maioria das unidades litoestratigráficas e litodêmicas regionais e, juntamente com poucos dados de Sm-Nd em rocha total, mostram ser o período entre 2,0 e 2,2 Ga a época de formação da quase totalidade das unidades rochosas (juvenis ou não). Apenas um granitóide possui idade de cristalização neoproterozóica (~0,55 Ga) e o Arqueano apresenta-se somente como vestígio em cristais herdados de zircão e em idades modelo Sm-Nd (T_DM) de protólitos de algumas unidades. A avaliação das características composicionais, metamórficas, estruturais, geofísicas e geocronológicas das diversas unidades sustenta a divisão prévia em dois domínios, mas mostra que o domínio (cinturão) Gurupi possui história orogênica paleoproterozóica comum ao domínio (cráton) São Luís. O domínio Gurupi possui características de orógeno colisional, enquanto que o domínio São Luís possui características acrescionárias e ambos participaram da colagem orogênica Paleoproterozóica (2,2 - 2,0 Ga), muito importante em escala global. No Neoproterozóico, a borda sul desse conjunto foi afetada por forte atividade tectônica direcional e litogênese muito limitada, como reflexo da colagem orogênica Brasiliana, definindo a configuração atual do Cinturão Gurupi e da borda sul do Cráton São Luís.

Ambiente flúvio-deltáico influenciado por maré e tempestade da Formação Rio Maria, leste da Província Carajás (SE) do Cráton Amazônico

A Formação Rio Maria compreende uma sucessão sedimentar progradante depositada em mar epicontinental desenvolvido ao longo da borda leste da Província Carajás – a mais antiga província do Cráton Amazônico – tendo sido intrudida por granitos em torno de 1.88 Ga. Quatro associações de fácies foram reconhecidas: prodelta-barras distais, frente deltaica-shoreface, planície deltaica-distributários e canais fluviais. Estratificações cruzadas hummocky e swaley de grande porte (> 1 m) atestam influência de ondas de tempestade nos depósitos de shoreface (tempestitos) e estratificações bipolares com recobrimento argiloso indicam atuação de processos de maré. As composições modais dos componentes detríticos do quartzarenito, sublitarenito e arcóseo indicam fontes de blocos continentais (Cráton interior, segundo a classificação de Dickinson). Os minerais pesados (por exemplo, zircão, turmalina, estaurolita, epidoto, etc.) sugerem contribuições de rochas plutônicas félsicas e metamórfica. Grãos de zircão muito bem arredondados podem ser relacionados a sedimentos reciclados ou intensamente retrabalhados, ou fontes metamórficas. Esses litotipos podem ser atribuídos às rochas que constituem o Bloco Rio Maria, que inclui granitos e rochas metamórficas do terreno granito-greenstone de Rio Maria (3.0 – 2.86 Ga).

Biostratigraphy and paleoecology of an unusual palynological record from the Aquidauana Formation, Late Pennsylvanian of Paraná Basin

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Uma estética do paradoxo: aspectos do melodrama no romance latino-americano do pós-boom

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A new species of Equinoxiodus (Dipnoi: ?Neoceratodontidae) from the Late Cretaceous of Brazil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A new turtle from the Upper Cretaceous Bauru Group of Brazil, updated phylogeny and implications for age of the Santo Anastacio Formation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Multistep taphonomic alterations in fluvial mollusk shells: a case study in the touro passo formation (pleistocene–holocene), Southern Brazil

Accurate paleoenvironmental reconstruction relies on the correct interpretation of the postmortem history of skeletal remains in shelly assemblages. In contrast to marine settings, actualistic taphonomic studies are lacking for shell-rich concentrations in freshwater riverine systems. In particular, the taphonomic pathways and the origins of taphonomic signatures that are recorded in bioclasts from fluvial settings are poorly known. In this study, we addressed this issue by comparing the taphonomic signatures and shell-damage profiles among shells of freshwater mollusks recorded both in death and in fossil assemblages from the same fluvial environment. Our data indicated that dissolution was the most pervasive taphonomic process leading to the destruction of the shells. The loss of taphonomic information extended beyond shell dissolution in the riverbed, or the early diagenesis in the sedimentary record. The loss of biological information from the living community through the death assemblage, until the incorporation of shells as fossils, mainly occurred during the time the shells were in the sediment-water interface. Though this destruction affected primarily dead shells, reworked fossils also became vulnerable because they were carried out into the river load again by channel avulsion. A model that included the main taphonomic pathways followed by the molluscan shells in the fluvial Touro Passo Formation (Pleistocene-Holocene) is discussed. In this model, two main destructive domains were recognized, which were the biological, physical, and chemical processes operating at the taphonomically active zone (= TAZ domain) and the pedogenetic domain.

Análise paleopalinológica do Albiano (Cretáceo inferior) da Bacia de Campos, com ênfase no estudo de dinoflagelados

Pós-graduação em Geociências e Meio Ambiente - IGCE

Trophic structure on the West Antarctic Peninsula shelf: Detritivory and benthic inertia revealed by delta(13)C and delta(15)N analysis

Summer bloom-derived phytodetritus settles rapidly to the seafloor on the West Antarctic Peninsula (WAP) continental shelf, where it appears to degrade relatively slowly, forming a sediment ""food bank"" for benthic detritivores. We used stable carbon and nitrogen isotopes to examine sources and sinks of particulate organic material (POM) reaching the WAP shelf benthos (550-625 m depths), and to explore trophic linkages among the most abundant benthic megafauna. We measured delta(13)C and delta(15)N values in major megafaunal taxa (n = 26) and potential food sources, including suspended and sinking POM, ice algae, sediment organic carbon, phytodetritus, and macrofaunal polychaetes. The range in delta(13)C values (> 14 parts per thousand) of suspended POM was considerably broader than in sedimentary POC, where little temporal variability in stable isotope signatures was observed. While benthic megafauna also exhibited a broad range of VC values, organic carbon entering the benthic food web appeared to be derived primarily from phytoplankton production, with little input from ice algae. One group of organisms, primarily deposit-feeders, appeared to rely on fresh phytodetritus recovered from the sediments, and sediment organic material that had been reworked by sediment microbes. A second group of animals, including many mobile invertebrate and fish predators, appeared to utilize epibenthic or pelagic food resources such as zooplankton. One surface-deposit-feeding holothurian (Protelpidia murrayi) exhibited seasonal variability in stable isotope values of body tissue, while other surface- and subsurface-deposit-feeders showed no evidence of seasonal variability in food source or trophic position. Detritus from phytoplankton blooms appears to be the primary source of organic material for the detritivorous benthos; however, seasonal variability in the supply of this material is not mirrored in the sediments, and only to a minor degree in the benthic fauna. This pattern suggests substantial inertia in benthic-pelagic coupling, whereby the sediment ecosystem integrates long-term variability in production processes in the water column above. Published by Elsevier Ltd.

Petrographic approach to the study of organic microfossils from the Irati Subgroup (Permian, Parana Basin, Brazil)

Early diagenetic chert, infrequently exploited in Phanerozoic micropaleontology, was examined for organic-walled microfossils in petrographic thin sections of silicified dolostones from diverse levels and localities of the Assistencia Formation (Permian, Parana Basin) in the state of Sao Paulo, Brazil. In contrast to previous palynological studies of this formation, the use of thin sections allowed direct observation in three dimensions of common palynomorphs, as well as benthic microbial mats preserved in situ in various stages of their life cycles and degradation. As in palynological residues from the more wellknown shale of this formation, the chert contains wind-dispersed pollen grains and phytoclasts derived from terrestrial sources and planktonic cryptarchs (unornamented coccoidal unicellular or colonial palynomorphs). However, only in the chert is it possible to see much more delicate microfossils, such as abundant cyanobacteria of the in situ benthic microbiota as well as chlorophycean microalgae of the microphytoplankton. Post-depositional processes affecting the formation have destroyed all but the most resistant organic remains in the other lithologies, such that only rare, degraded pollen grains are seen in the unsilicified dolostone of the formation, and in the shale the vast majority of microfossils have been compacted to flattened disks. On the other hand, early silicification not only preserved organic remains at an incipient stage of decomposition but also impeded significant further degradation due to compaction, recrystallization, and oxidation. Thus, the petrographic study of such chert can complement traditional palynological investigations in Phanerozoic rocks by furnishing hitherto unavailable information, especially with regard to benthic organic microfossils and fragile organic-walled phytoplankton normally absent from organic residues. (C) 2011 Elsevier Ltd. All rights reserved.

Evolution of Precambrian life in the Brazilian geological record

Precambrian rocks comprise nearly one-quarter of the surface of Brazil and range from Paleoarchean (ca. 3.6 Ga) to the latest Ediacaran (0.542 Ga) in age. Except for controversial phosphatized 'embryo-like' microfossils like those from the lower Ediacaran Doushantuo Formation, China and complex rangeomorphs, Brazilian research has revealed all major categories of Precambrian life forms described elsewhere - microbialites, biomarkers, silicified microfossils, palynomorphs, vase-shaped microfossils, macroalgae, metazoans, vendobionts and ichnofossils - but the paleobiological significance of this record has been little explored. At least four occurrences of these fossils offer promise for increased understanding of the following aspects of Precambrian biospheric evolution: (i) the relationship of microbialites in 2.1-2.4 Ga old carbonates of the Minas Supergroup in the Quadrilatero Ferrifero, Minas Gerais (the oldest Brazilian fossils) to the development of the early oxygenic atmosphere and penecontemporaneous global tectonic and climatic events; (ii) the evolutionary and biostratigraphic significance of Mesoproterozoic to Ediacaran organic-walled microfossils in central-western Brazil; (iii) diversity and paleoecological significance of vase-shaped heterotrophic protistan microfossils in the Urucum Formation (Jacadigo Group) and possibly the Bocaina Formation (Corumba Group), of Mato Grosso do Sul; and (iv) insights into the record of skeletogenesis and paleoecology of latest Ediacaran metazoans as represented by the abundant organic carapaces of Corumbella and calcareous shells of the index fossil Cloudina, of the Corumba Group, Mato Grosso do Sul. Analysis of the Brazilian Precambrian fossil record thus holds great potential for augmenting paleobiological knowledge of this crucial period on Earth and for developing more robust hypotheses regarding possible origins and evolutionary pathways of biospheres on other planets. Received 26 February 2012, accepted 17 May 2012, first published online 18 June 2012

Morphology and surface sedimentation on the upper and middle continental slope off Uruguay

This paper presents for the first time a morphological and surface sediment characterization of the Uruguayan outer continental shelf and slope. The study is based on a high-resolution coverage using hydrographical, geomorphological and sedimentological sampling and several textural and productivity proxies. Along slope terraces and an important canyon system characterizes continental slope morphology, indicating that across- and down-slope sedimentary processes control large-scale sedimentation. Terraces represent the prolongation of the Argentinean Contouritic Depositional System that vanishes in the study area, presumably as a result of the dynamic of the Brazil-Malvinas confluence. Canyons incised in the upper slope are likely related to low-stand sea level conditions. At the outer shelf and shallow upper slope (170-250 m depth), off-shelf sand transport is inferred from the distribution of relict sand and reworked biogenic gravel. In the upper continental slope, the northern region is characterized by an erosive environment controlled by a steep slope and the southward flowing Brazil current. In the south, a depositional environment is enhanced by the presence of a gentler slope and seaward incised canyons and is mainly controlled by hemipelagic processes associated with nutrient-rich Sub-Antarctic Waters (SAW), by its confluence with South Atlantic Central Waters (SACW) and by the Rio de la Plata’s (RdlP) influence. Additionally, within the upper slope, the occurrence of igneous-metamorphic cobbles and pebbles in canyon and mound lag deposits suggests the influence of glacial fluvial discharge and/or iceberg transport processes. In the middle slope, sedimentation is controlled by thermohaline-induced deep-water bottom currents. The decreasing influence of the erosive Antarctic Intermediate Water (AAIW) is evident in a northward diminution in grain size. The variety of transport and sedimentary processes identified reflect the control of the Brazil-Malvinas confluence zone and the Rio de la Plata’s discharge.

Modellazione e simulazione di sistemi meccanici ad elevato numero di gradi di libertà mediante metodi non convenzionali e sistemi CAD

Recent developments in piston engine technology have increased performance in a very significant way. Diesel turbocharged/turbo compound engines, fuelled by jet fuels, have great performances. The focal point of this thesis is the transformation of the FIAT 1900 jtd diesel common rail engine for the installation on general aviation aircrafts like the CESSNA 172. All considerations about the diesel engine are supported by the studies that have taken place in the laboratories of the II Faculty of Engineering in Forlì. This work, mostly experimental, concerns the transformation of the automotive FIAT 1900 jtd – 4 cylinders – turbocharged – diesel common rail into an aircraft engine. The design philosophy of the aluminium alloy basement of the spark ignition engine have been transferred to the diesel version while the pistons and the head of the FIAT 1900 jtd are kept in the aircraft engine. Different solutions have been examined in this work. A first V 90° cylinders version that can develop up to 300 CV and whose weight is 30 kg, without auxiliaries and turbocharging group. The second version is a development of e original version of the diesel 1900 cc engine with an optimized crankshaft, that employ a special steel, 300M, and that is verified for the aircraft requirements. Another version with an augmented stroke and with a total displacement of 2500 cc has been examined; the result is a 30% engine heavier. The last version proposed is a 1600 cc diesel engine that work at 5000 rpm, with a reduced stroke and capable of more than 200 CV; it was inspired to the Yamaha R1 motorcycle engine. The diesel aircraft engine design keeps the bore of 82 mm, while the stroke is reduced to 64.6 mm, so the engine size is reduced along with weight. The basement weight, in GD AlSi 9 MgMn alloy, is 8,5 kg. Crankshaft, rods and accessories have been redesigned to comply to aircraft standards. The result is that the overall size is increased of only the 8% when referred to the Yamaha engine spark ignition version, while the basement weight increases of 53 %, even if the bore of the diesel version is 11% lager. The original FIAT 1900 jtd piston has been slightly modified with the combustion chamber reworked to the compression ratio of 15:1. The material adopted for the piston is the aluminium alloy A390.0-T5 commonly used in the automotive field. The piston weight is 0,5 kg for the diesel engine. The crankshaft is verified to torsional vibrations according to the Lloyd register of shipping requirements. The 300M special steel crankshaft total weight is of 14,5 kg. The result reached is a very small and light engine that may be certified for general aviation: the engine weight, without the supercharger, air inlet assembly, auxiliary generators and high pressure body, is 44,7 kg and the total engine weight, with enlightened HP pump body and the titanium alloy turbocharger is less than 100 kg, the total displacement is 1365 cm3 and the estimated output power is 220 CV. The direct conversion of automotive piston engine to aircrafts pays too huge weight penalties. In fact the main aircraft requirement is to optimize the power to weight ratio in order to obtain compact and fast engines for aeronautical use: this 1600 common rail diesel engine version demonstrates that these results can be reached.

Neoproterozoic to middle Palaeozoic evolution of the Central Asian Orogenic Belt in south-central Mongolia: chronological and geochemical perspectives

Mongolia occupies a central position within the eastern branch of the large accretionary Central Asian Orogenic Belt (CAOB) or Altaids. The present work aims to outline the geodynamic environment and possible evolution of this part of the eastern CAOB, predominantly from the Cambrian to the middle Palaeozoic. The investigation primarily focussed on zircon geochronology as well as whole-rock geochemical and Sm–Nd isotopic analyses for a variety of metaigneous rocks from the southern Hangay and Gobi-Altai regions in south-central Mongolia. The southern slope of the Hangay Mountains in central Mongolia exposes a large NWSE-trending middle Neoproterozoic ophiolitic complex (c. 650 Ma), which is tectonically integrated within an accretionary complex developed between the Precambrian Baydrag and Hangay crustal blocks. Formation of the entire accretionary system along the north-eastern margin of the Baydrag block mainly occurred during the early Cambrian, but convergence within this orogenic zone continued until the early Ordovician, because of on-going southward subduction-accretion of the Baydrag block. An important discovery is the identification of a late Mesoproterozoic to early Neoproterozoic belt within the northern Gobi-Altai that was reworked during the late Cambrian and throughout the late Ordovician/Devonian. Early Silurian low-grade mafic and felsic metavolcanic rocks from the northern Gobi-Altai display subduction-related geochemical features and highly heterogeneous Nd isotopic compositions, which suggest an origin at a mature active continental margin. Early Devonian protoliths of granodioritic and mafic gneisses from the southern Gobi-Altai display geochemical and Nd isotopic compositions compatible with derivation and evolution from predominantly juvenile crustal and mantel sources and these rocks may have been emplaced within the outboard portion of the late Ordovician/early Silurian active continental margin. Moreover, middle Devonian low-grade metavolcanic rocks from the southwestern Gobi-Altai yielded geochemical and Nd isotopic data consistent with emplacement in a transitional arc-backarc setting. The combined U–Pb zircon ages and geochemical data obtained from the Gobi-Altai region suggest that magmatism across an active continental margin migrated oceanwards through time by way of subduction zone retreat throughout the Devonian. Progressive extension of the continental margin was associated with the opening of a backarc basin and culminated in the late Devonian with the formation of a Japan-type arc front facing a southward open oceanic realm (present-day coordinates).

Integrated reconstruction of Holocene millennial-scale environmental changes in Tierra del Fuego, southernmost South America

This study presents new paleoenvironmental data obtained from sedimentary cores from Lago Fagnano, an elon- gated lake located at 54°S in southernmost South America. Data from palynomorphs (pollen, spores and algae) and associated palynofacies as well as from diatom taxa retrieved from these cores compared with other regional proxies contribute to evaluate the similarities and differences in the climate patterns based on different proxies from southernmost Patagonia. The pollen analysis reveals that a grass steppe environment existed during the early Holocene (11,300–~8000 cal a BP) followed by a major vegetation change characterized by development of forest-steppe ecotone communities between ~8000 and ~6500 cal a BP, under more humid conditions. Between ~ 6500 and ~ 4000 cal a BP, expansion and colonization by Nothofagus forests reflect an increase in effec- tive moisture levels, while openness in the forest communities characterizes the region after ~ 1100 cal a BP. The palynological organic matter combined with the algal content reflects hydrological changes occurring in the lake and its nutrient status, probably in close relation with past climate oscillations. All these past ecological changes are closely related to oscillations in precipitation and temperature as a response to the variations in the latitudinal position and/or strength of the Southern Westerlies wind belt during the Holocene.