Physical characteristics of small ions and their interaction with ultrafine particles in the urban environment

In recent years, the effect of ions and ultrafine particles on ambient air quality and human health has been well documented, however, knowledge about their sources, concentrations and interactions within different types of urban environments remains limited. This thesis presents the results of numerous field studies aimed at quantifying variations in ion concentration with distance from the source, as well as identifying the dynamics of the particle ionisation processes which lead to the formation of charged particles in the air. In order to select the most appropriate measurement instruments and locations for the studies, a literature review was also conducted on studies that reported ion and ultrafine particle emissions from different sources in a typical urban environment. The initial study involved laboratory experiments on the attachment of ions to aerosols, so as to gain a better understanding of the interaction between ions and particles. This study determined the efficiency of corona ions at charging and removing particles from the air, as a function of different particle number and ion concentrations. The results showed that particle number loss was directly proportional to particle charge concentration, and that higher small ion concentrations led to higher particle deposition rates in all size ranges investigated. Nanoparticles were also observed to decrease with increasing particle charge concentration, due to their higher Brownian mobility and subsequent attachment to charged particles. Given that corona discharge from high voltage powerlines is considered one of the major ion sources in urban areas, a detailed study was then conducted under three parallel overhead powerlines, with a steady wind blowing in a perpendicular direction to the lines. The results showed that large sections of the lines did not produce any corona at all, while strong positive emissions were observed from discrete components such as a particular set of spacers on one of the lines. Measurements were also conducted at eight upwind and downwind points perpendicular to the powerlines, spanning a total distance of about 160m. The maximum positive small and large ion concentrations, and DC electric field were observed at a point 20 m downwind from the lines, with median values of 4.4×103 cm-3, 1.3×103 cm-3 and 530 V m-1, respectively. It was estimated that, at this point, less than 7% of the total number of particles was charged. The electrical parameters decreased steadily with increasing downwind distance from the lines but remained significantly higher than background levels at the limit of the measurements. Moreover, vehicles are one of the most prevalent ion and particle emitting sources in urban environments, and therefore, experiments were also conducted behind a motor vehicle exhaust pipe and near busy motorways, with the aim of quantifying small ion and particle charge concentration, as well as their distribution as a function of distance from the source. The study found that approximately equal numbers of positive and negative ions were observed in the vehicle exhaust plume, as well as near motorways, of which heavy duty vehicles were believed to be the main contributor. In addition, cluster ion concentration was observed to decrease rapidly within the first 10-15 m from the road and ion-ion recombination and ion-aerosol attachment were the most likely cause of ion depletion, rather than dilution and turbulence related processes. In addition to the above-mentioned dominant ion sources, other sources also exist within urban environments where intensive human activities take place. In this part of the study, airborne concentrations of small ions, particles and net particle charge were measured at 32 different outdoor sites in and around Brisbane, Australia, which were classified into seven different groups as follows: park, woodland, city centre, residential, freeway, powerlines and power substation. Whilst the study confirmed that powerlines, power substations and freeways were the main ion sources in an urban environment, it also suggested that not all powerlines emitted ions, only those with discrete corona discharge points. In addition to the main ion sources, higher ion concentrations were also observed environments affected by vehicle traffic and human activities, such as the city centre and residential areas. A considerable number of ions were also observed in a woodland area and it is still unclear if they were emitted directly from the trees, or if they originated from some other local source. Overall, it was found that different types of environments had different types of ion sources, which could be classified as unipolar or bipolar particle sources, as well as ion sources that co-exist with particle sources. In general, fewer small ions were observed at sites with co-existing sources, however particle charge was often higher due to the effect of ion-particle attachment. In summary, this study quantified ion concentrations in typical urban environments, identified major charge sources in urban areas, and determined the spatial dispersion of ions as a function of distance from the source, as well as their controlling factors. The study also presented ion-aerosol attachment efficiencies under high ion concentration conditions, both in the laboratory and in real outdoor environments. The outcomes of these studies addressed the aims of this work and advanced understanding of the charge status of aerosols in the urban environment.

Measured and perceived physical fitness, intention, and self-reported physical activity in adolescence

Objective: The aim of this study was to investigate the associations among measured physical fitness, perceived fitness, intention towards future physical activity and self-reported physical activity through junior high school years. Methods: Study participants included 122 Finnish students who were 13 years old during Grade 7. The sample was comprised of 80 girls and 42 boys from 3 junior high schools (Grades 7-9). During the autumn semester of Grade 7, students completed fitness tests and a questionnaire analyzing self-perception of their physical fitness. The questionnaire delivered at Grade 8 included intention towards future physical activity. At Grade 9 students’ self-reported physical activity levels. Results: Structural Equation Modeling revealed an indirect path from physical fitness to self-reported physical activity via perceived physical fitness and intention towards future physical activity. The model also demonstrated a correlation between perceived physical fitness and physical activity. Squared multiple correlations revealed that perceived physical fitness explained 33 % of the actual physical fitness. Conclusions: The results of this study highlight the role of physical and cognitive variables in the process of adoption of physical activity in adolescence.

Psycho-markers of weight loss. The roles of TFEQ Disinhibition and Restraint in exercise-induced weight management

Eating behaviour traits, namely Disinhibition and Restraint, have the potential to exert an effect on food intake and energy balance. The effectiveness of exercise as a method of weight management could be influenced by these traits. Fifty eight overweight and obese participants completed 12-weeks of supervised exercise. Each participant was prescribed supervised exercise based on an expenditure of 500 kcal/session, 5 d/week for 12-weeks. Following 12-weeks of exercise there was a significant reduction in mean body weight (-3.26 ± 3.63 kg), fat mass (FM: -3.26 ± 2.64 kg), BMI (-1.16 ± 1.17 kg/m2)and waist circumference (WC: -5.0 ± 3.23 cm). Regression analyses revealed a higher baseline Disinhibition score was associated with a greater reduction in BMI and WC, while Internal Disinhibition was associated with a larger decrease in weight, %FM and WC. Neither baseline Restraint or Hunger were associated with any of the anthropometric markers at baseline or after 12-weeks. Furthermore, after 12-weeks of exercise, a decrease in Disinhibition and increase in Restraint were associated with a greater reduction in WC, whereas only Restraint was associated with a decrease in weight. Post-hoc analysis of the sub-factors revealed a decrease in External Disinhibition and increase in Flexible Restraint were associated with weight loss. However, an increase in Rigid Restraint was associated with a reduction in %FM and WC. These findings suggest that exercise-induced weight loss is more marked in individuals with a high level of Disinhibition. These data demonstrate the important roles that Disinhibition and Restraint play in the relationship between exercise and energy balance.

Influence of physical and chemical properties of solids on heavy metal adsorption

Partition of heavy metals between particulate and dissolve fraction of stormwater primarily depends on the adsorption characteristics of solids particles. Moreover, the bioavailability of heavy metals is also influenced by the adsorption behaviour of solids. However, due to the lack of fundamental knowledge in relation to the heavy metals adsorption processes of road deposited solids, the effectiveness of stormwater management strategies can be limited. The research study focused on the investigation of the physical and chemical parameters of solids on urban road surfaces and, more specifically, on heavy metal adsorption to solids. Due to the complex nature of heavy metal interaction with solids, a substantial database was generated through a series of field investigations and laboratory experiments. The study sites for the build-up pollutant sample collection were selected from four urbanised suburbs located in a major river catchment. Sixteen road sites were selected from these suburbs and represented typical industrial, commercial and residential land uses. Build-up pollutants were collected using a wet and dry vacuum collection technique which was specially designed to improve fine particle collection. Roadside soil samples were also collected from each suburb for comparison with the road surface solids. The collected build-up solids samples were separated into four particle size ranges and tested for a range of physical and chemical parameters. The solids build-up on road surfaces contained a high fraction (70%) of particles smaller than 150ìm, which are favourable for heavy metal adsorption. These solids particles predominantly consist of soil derived minerals which included quartz, albite, microcline, muscovite and chlorite. Additionally, a high percentage of amorphous content was also identified in road deposited solids. In comparing the mineralogical data of surrounding soil and road deposited solids, it was found that about 30% of the solids consisted of particles generated from traffic related activities on road surfaces. Significant difference in mineralogical composition was noted in different particle sizes of build-up solids. Fine solids particles (<150ìm) consisted of a clayey matrix and high amorphous content (in the region of 40%) while coarse particles (>150ìm) consisted of a sandy matrix at all study sites, with about 60% quartz content. Due to these differences in mineralogical components, particles larger than and smaller than 150ìm had significant differences in their specific surface area (SSA) and effective cation exchange capacity (ECEC). These parameters, in turn, exert a significant influence on heavy metal adsorption. Consequently, heavy metal content in >150ìm particles was lower than in the case of fine particles. The particle size range <75ìm had the highest heavy metal content, corresponding with its high clay forming minerals, high organic matter and low quartz content which increased the SSA, ECEC and the presence of Fe, Al and Mn oxides. The clay forming minerals, high organic matter and Fe, Al and Mn oxides create distinct groups of charge sites on solids surfaces and exhibit different adsorption mechanisms and bond strength, between heavy metal elements and charge sites. Therefore, the predominance of these factors in different particle sizes leads to different heavy metal adsorption characteristics. Heavy metals show preference for association with clay forming minerals in fine solids particles, whilst in coarse particles heavy metals preferentially associate with organic matter. Although heavy metal adsorption to amorphous material is very low, the heavy metals embedded in traffic related materials have a potential impact on stormwater quality.Adsorption of heavy metals is not confined to an individual type of charge site in solids, whereas specific heavy metal elements show preference for adsorption to several different types of charge sites in solids. This is attributed to the dearth of preferred binding sites and the inability to reach the preferred binding sites due to competition between different heavy metal species. This confirms that heavy metal adsorption is significantly influenced by the physical and chemical parameters of solids that lead to a heterogeneity of surface charge sites. The research study highlighted the importance of removal of solids particles from stormwater runoff before they enter into receiving waters to reduce the potential risk posed by the bioavailability of heavy metals. The bioavailability of heavy metals not only results from the easily mobile fraction bound to the solids particles, but can also occur as a result of the dissolution of other forms of bonds by chemical changes in stormwater or microbial activity. Due to the diversity in the composition of the different particle sizes of solids and the characteristics and amount of charge sites on the particle surfaces, investigations using bulk solids are not adequate to gain an understanding of the heavy metal adsorption processes of solids particles. Therefore, the investigation of different particle size ranges is recommended for enhancing stormwater quality management practices.

Community planning : integrating social and physical environments

This key planning textbook on designing healthy and sustainable communities informs planners about community life and the processes of planning and equips them with the essential knowledge and skills they need to organise change and improve the quality of urban living. The author examines the impacts of social and economic change on community life and organization and explores ways in which these changes can be planned and managed. Community planning is presented as a means to balance and integrate beneficial change with the maintenance of valued cultural traditions and life styles. This involves bringing together fields of study and practice including urban and regional planning, design, communication, housing, community organization, employment, transport, and governance. Links drawn between personal values, human activities, physical spaces and societal governance assist this process of synthesis. Establishing a common vocabulary to discuss planning - for urban and regional planners, including health planners; and open space planners - enables both students and practitioners to work with each other and with those for whom they provide services to create stronger, healthier and more sustainable communities. The aims and roles of community planning are explored and the key planning operations are explained, including the phases and applications of community planning method; the planning and location of community facilities; the roles of design in shaping responsive community spaces; and the capacity of different types of community governance to improve the relations between citizens and societies. The book is organized into two main parts: after the first three chapters have established the interests and scope of community planning, the next six each moves from an account of issues and theoretical concerns, through a review of case studies, to summaries of leading practice. This positive approach is intended to encourage readers to develop their own capacities for effective participation and action. The concluding chapter draws together the contributions of preceding ones to demonstrate the integrity of the community planning process

‘Please leave your mobile phone on’ : Social educational networking in a social society : Encouraging in-class engagement at QUT across physical and virtual learning environments

Though stadium style seating in large lecture theatres may suggest otherwise, effective teaching and learning is a not a spectator sport. A challenge in creating effective learning environments in both physical and virtual spaces is to provide optimal opportunity for student engagement in active learning. Queensland University of Technology (QUT) has developed the Open Web Lecture (OWL), a new web-based student response application, which seamlessly integrates a virtual learning environment within the physical learning space. The result is a blended learning experience; a fluid collaboration between academic and students connected to OWL via the University’s Wi-Fi using their own laptop or mobile web device. QUT is currently piloting the OWL application to encourage student engagement. OWL offers opportunities for participants to: • Post comments and questions • Reply to comments
 • "Like" comments
 • Poll students and review data • Review archived sessions. Many of these features instinctively appeal to student users of social networking media, yet avail the academic of control within the University network. Student privacy is respected through a system of preserving peer-peer anonymity, a functionality that seeks to address a traditional reluctance to speak up in large classes. The pilot is establishing OWL as an opportunity for engaging students in active learning opportunities by enabling • virtual learning in physical spaces for large group lectures, seminar groups, workshops and conferences • live collaborative technology connecting students and the academic via the wireless network using their own laptop or mobile device • an non- intimidating environment in which to ask questions • promotion of a sense of community • instant feedback • problem based learning. The student and academic response to OWL has been overwhelmingly positive, crediting OWL as an easy to use application, which creates effective learning opportunities though interactivity and immediate feedback. This poster and accompanying online presentation of the technology will demonstrate how OWL offers new possibilities for active learning in physical spaces by: • providing increased opportunity for student engagement • supporting a range of learners and learning activities • fostering blended learning experiences. The presentation will feature visual displays of the technology, its various interfaces and feedback including clips from interviews with students and academics participating in the early stages of the pilot.

Evaluation of modal analysis techniques using physical models to detect osseointegration of implants in transfemoral amputees

Non-invasive vibration analysis has been used extensively to monitor the progression of dental implant healing and stabilization. It is now being considered as a method to monitor femoral implants in transfemoral amputees. This paper evaluates two modal analysis excitation methods and investigates their capabilities in detecting changes at the interface between the implant and the bone that occur during osseointegration. Excitation of bone-implant physical models with the electromagnetic shaker provided higher coherence values and a greater number of modes over the same frequency range when compared to the impact hammer. Differences were detected in the natural frequencies and fundamental mode shape of the model when the fit of the implant was altered in the bone. The ability to detect changes in the model dynamic properties demonstrates the potential of modal analysis in this application and warrants further investigation.

A rebirth of physical activity in parents : applying a theory-based approach

Physical inactivity is a serious concern both nationally and internationally. Despite the numerous benefits of performing regular physical activity, many individuals lead sedentary lifestyles. Of concern, though, is research showing that some population sub-groups are less likely to be active, such as parents of young children. Although there is a vast amount of research dedicated to understanding people.s physical activity-related behaviours, there is a paucity of research examining those factors that influence parental physical activity. More importantly, research applying theoretical models to understand physical activity decision-making among this at-risk population is limited. Given the current obesity epidemic, the decline in physical activity with parenthood, and the many social and health benefits associated with regular physical activity, it is important that adults with young children are sufficiently active. In light of the dearth of research examining parental physical activity and the scant research applying a theory-based approach to gain this understanding, the overarching aim of the current program of research was to adopt a mixed methods approach as well as use sound theoretical frameworks to understand the regular physical activity behaviour of mothers and fathers with young children. This program of research comprised of three distinct stages: a qualitative stage exploring individual, social, and psychological factors that influence parental regular physical activity (Stage 1); a quantitative stage identifying the important predictors of parental regular physical activity intentions and behaviour using sound theoretical frameworks and testing a single-item measure for assessing parental physical activity behaviour (Stage 2); and a qualitative stage exploring strategies for an intervention program aimed at increasing parental regular physical activity (Stage 3). As a thesis by publication, eight papers report the findings of this program of research; these papers are presented according to the distinct stages of investigation that guided this program of research. Stage One of the research program comprised a qualitative investigation using a focus group/interview methodology with parents of children younger than 5 years of age (N = 40; n = 21 mothers, n = 19 fathers) (Papers 1, 2, and 3). Drawing broadly on a social constructionist approach (Paper 1), thematic analytic methods revealed parents. understandings of physical activity (e.g., requires effort), patterns of physical activity-related behaviours (e.g., grab it when you can, declining physical activity habits), and how constructions of social role expectations might influence parents. physical activity decision making (e.g., creating an active family culture, guilt and selfishness). Drawing on the belief-based framework of the TPB (Paper 2), thematic content analytic methods revealed parents. commonly held beliefs about the advantages (e.g., improves parenting practices), disadvantages (e.g., interferes with commitments), barriers (e.g., time), and facilitators (e.g., social support) to performing regular physical activity. Parents. normative beliefs about social approval from important others or groups (e.g., spouse/partner) were also identified. Guided by theories of social support, Paper Three identified parents. perceptions about the specific social support dimensions that influence their physical activity decision making. Thematic content analysis identified instrumental (e.g., providing childcare, taking over chores), emotional (e.g., encouragement, companionship), and informational support (e.g., ideas and advice) as being important to the decision-making of parents in relation to their regular physical activity behaviour. The results revealed also that having support for being active is not straightforward (e.g., guilt-related issues inhibited the facilitative nature of social support for physical activity). Stage Two of the research program comprised a quantitative examination of parents. physical activity intentions and behaviour (Papers 4, 5, 6, and 7). Parents completed an extended TPB questionnaire at Time 1 (N = 580; n = 288 mothers, n = 292 fathers) and self-reported their physical activity at Time 2, 1 week later (N = 458; n = 252 mothers, n = 206 fathers). Paper Four revealed key behavioural (e.g., improving parenting practices), normative (e.g., people I exercise with), and control (e.g., lack of time) beliefs as significant independent predictors of parental physical activity. A test of the TPB augmented to include the constructs of self-determined motivation and planning was assessed in Paper Five. The findings revealed that the effect of self-determined motivation on intention was fully mediated by the TPB variables and the impact of intention on behaviour was partially mediated by the planning variables. Slight differences in the model.s motivational sequence between the sexes were also noted. Paper Six investigated, within a TPB framework, a range of social influences on parents. intentions to be active. For both sexes, attitude, perceived behavioural control, group norms, friend general support, and an active parent identity predicted intentions, with subjective norms and family support further predicting mothers. intentions and descriptive norms further predicting fathers. intentions. Finally, the measurement of parental physical activity was investigated in Paper Seven of Stage Two. The results showed that parents are at risk of low levels of physical activity, with the findings also revealing validation support for a brief single-item physical activity measure. Stage Three of the research program comprised a qualitative examination of parents. (N = 12; n = 6 mothers, n = 6 fathers) ideas for strategies that may be useful for developing and delivering an intervention program aimed at increasing parental physical activity (Paper 8). Parents revealed a range of strategies for what to include in a physical activity intervention designed for parents of young children. For example, parents identified persuasion and information type messages, problem-solving strategies that engage parents in generating a priority list of their lifestyle commitments, and behavioural modification techniques such as goal setting and incentives. Social intervention strategies (e.g., social comparison, counselling) and environmental approaches (e.g., community-based integrative parent/child programs) were also identified as was a skill-based strategy in helping parents generate a flexible life/family plan. Additionally, a range of strategies for how to best deliver a parental physical activity intervention was discussed. Taken as a whole, Paper Eight found that adopting a multifaceted approach in both the design and implementation of a resultant physical activity intervention may be useful in helping to increase parental physical activity. Overall, this program of research found support for parents as a unique group who hold both similar and distinctive perceptions about regular physical activity to the general adult population. Thus, these findings highlight the importance of targeting intervention strategies for parents of young children. Additionally, the findings suggest that it might also be useful to tailor some messages specifically to each sex. Effective promotion of physical activity in parents of young children is essential given the low rate of activity in this population. Results from this program of research highlight parents as an at-risk group for inactivity and provide an important first step in identifying the factors that influence both mothers. and fathers. physical activity decision making. These findings, in turn, provide a foundation on which to build effective intervention programs aimed at increasing parents. regular physical activity which is essential for ensuring the health and well-being of parents with young children.

Designerly analysis of a socio-physical design activity

The Making Design and Analysing Interaction track at the Participatory Innovation Conference calls for submissions from ‘Makers’ who will contribute examples of participatory innovation activities documented in video and ‘Analysts’ who will analyse those examples of participatory innovation activity. The aim of this paper is to open up for a discussion within the format of the track of the roles that designers could play in analysing the participatory innovation activities of others and to provide a starting point for this discussion through a concrete example of such ‘designerly analysis’. Designerly analysis opens new analytic frames for understanding participatory innovation and contributes to our understanding of design activities.

Red mud from Brazil : thermal behavior and physical properties

The main constituents of red mud produced in Aluminio city (S.P. – Brazil) are iron, aluminium and silicon oxides. It has been determined that the average particle diameter for this red mud is between 0.05 and 0.002mm. It is observed that a decrease in the percentage of smaller particles occurs at temperatures greater than 400°C. This observation corresponds with the thermal analysis and X-ray diffraction (XRD) data, which illustrate the phase transition of goethite to hematite. A 10% mass loss is observed in the thermal analysis patterns due to the hydroxide – oxide phase transitions of iron (primary phase transition) and aluminium (to a lesser extent). The disappearance and appearance of the different phases of iron and aluminium confirms the decomposition reactions proposed by the thermal analysis data. This Brazilian red mud has been classified as mesoporous at all temperatures except between 400 and 500°C where the classification changes to micro/mesoporous.

Physical capital and its consequences for fitness workers in Queensland

Sexual, social and employment success have been linked to the physical capital drawn from having aesthetic attributes of the socially idealised body. In certain workplace settings, such as health and fitness centres, the body becomes a mainstream commodity with physical capital affording the fitness worker a high degree of distinction and adoration as well as employment opportunities. The employment relationship is shaped by 'lookism', with both the employer and employee taking advantage of the fitness worker's idealised form. The worker's physical capital provides a walking billboard advertising the employer's products and services, while exposure to comparison and adoration provides a heightened sense of self-worth, distinction and celebrity. Fitness workers appear to be prepared to ignore poor employment conditions or trade-off standard entitlements for the alternative rewards that their physical capital brings.

How effective is the new child restraint legislation in Queensland? A mixed methods evaluation

Research Interests: Are parents complying with the legislation? Is this the same for urban, regional and rural parents? Indigenous parents? What difficulties do parents experience in complying? Do parents understand why the legislation was put in place? Have there been negative consequences for other organisations or sectors of the community?

A fragment of the LG3 peptide of endorepellin is present in the urine of physically active mining workers : a potential marker of physical activity

Biomarker analysis has been implemented in sports research in an attempt to monitor the effects of exertion and fatigue in athletes. This study proposed that while such biomarkers may be useful for monitoring injury risk in workers, proteomic approaches might also be utilised to identify novel exertion or injury markers. We found that urinary urea and cortisol levels were significantly elevated in mining workers following a 12 hour overnight shift. These levels failed to return to baseline over 24h in the more active maintenance crew compared to truck drivers (operators) suggesting a lack of recovery between shifts. Use of a SELDI-TOF MS approach to detect novel exertion or injury markers revealed a spectral feature which was associated with workers in both work categories who were engaged in higher levels of physical activity. This feature was identified as the LG3 peptide, a C-terminal fragment of the anti-angiogenic / anti-tumourigenic protein endorepellin. This finding suggests that urinary LG3 peptide may be a biomarker of physical activity. It is also possible that the activity mediated release of LG3 / endorepellin into the circulation may represent a biological mechanism for the known inverse association between physical activity and cancer risk / survival.

Physical effect in patent law

This thesis addresses one of the fundamental issues that remains unresolved in patent law today. It is a question that strikes at the heart of what a patent is and what it is supposed to protect. That question is whether an invention must produce a physical effect or cause a physical transformation of matter to be patentable, or whether it is sufficient that an invention involves a specific practical application of an idea or principle to achieve a useful result. In short, the question is whether patent law contains a physicality requirement. Resolving this issue will determine whether only traditional mechanical, industrial and manufacturing processes are patent eligible, or whether patent eligibility extends to include purely intangible, or non-physical, products and processes. To this end, this thesis seeks to identify where the dividing line lies between patentable subject matter and the recognised categories of excluded matter, namely, fundamental principles of nature, physical phenomena, and abstract ideas. It involves determining which technological advances are worth the inconvenience monopoly protection causes the public at large, and which should remain free for all to use without restriction. This is an issue that has important ramifications for innovation in the ‘knowledge economy’ of the Information Age. Determining whether patent law contains a physicality requirement is integral to deciding whether much of the valuable innovation we are likely to witness, in what are likely to be the emerging areas of technology in the near future, will receive the same encouragement as industrial and manufacturing advances of previous times.

An application of the Health Belief Model to understanding use of child restraint practices

Aims Multi-method study including two parts: Study One: three sets of observations in two regional areas of Queensland Study Two: two sets of parent intercept interviews conducted in Toowoomba, Queensland. The aim of Study Two is to determine parents’ views, opinions and knowledge of child restraint practices and the Queensland legislative amendment.