Procedimentos conservadores para restabelecimento da estética anterior

A Odontologia atual está direcionada em executar procedimentos cada vez menos invasivos sem perder a objetividade, tais como função e estética. Como tais procedimentos, podemos citar o clareamento dentário e a utilização de resinas compostas diretas, que nos fazem praticar o conceito de uma Odontologia minimamente invasiva. Este artigo tem o objetivo de demonstrar, através de alguns procedimentos conservadores, a possibilidade de se obter resultados satisfatórios.

Correspondência de cor de diferentes marcas e sistemas de resina c omposta em relação à escala vita classical

The objective of this study was to compare different resins and determine their matching color with Vita shade, also investigating the possibility of substitution among them and the correlation between the visual and spectrophotometry methods of color selection. The composite resin Tetric N-Ceram® shade A1 was used as light-control and color A4 as dark-control. For each material were prepared five 10 x 2 mm disks. Analyses were performed in a metamerism box by volunteers who ordered the specimens from the lightest to the darkest. The spectrophotometry was carried out using the spectrophotometer Vita Easyshade®. ∆E values were subjected to analysis of variance with 5% significance level. The Fisher exact test showed that there was no color match among the materials and the reference Vita shade. The possibility of substitution among the composites could not be established. The two methods are able to correctly differentiate the control resin A4 as distinct from the other resins shade A2.

Matriz Bertholdo/Ricci/Barrotte (BRB): uma simplificação de técnica para obtenção de guia de estratificação com compósitos

Advanced Layering composite resins can be facilitated by a technique called "Lingual Matrix", where a guide is made of elastomer by molding a previously waxed tooth or sculped in an intraoral test drive restoration. This technique has many advantages to sophisticated layering, facilitation stratification, anatomic construcrion and the stages of finishing and polishing. However, in some clinical situations, the unfolding of the steps to obtains this matrix can be time consuming or even infeasible. To facilitate the achievement of this apparatus, a technique was idealized allowing significant reducrion in clinical time. This matrix, called the "BRB Matrix" is widly discussed in a didactic and clinical manner in this article, presenting its advantages in clinical cases where it is imperative to use a guide for conduction a controlled layering. The simplicity of this approach, as well as reduced clinical time and finacial costs turn it feasible in an everyday clinical practice.

Reparo de uma restauração classe IV com o uso de resina composta nanoparticulada: quatro anos de acompanhamento

O aprimoramento da odontologia estética restauradora está ligado ao desenvolvimento de materiais e técnicas inovadoras, os quais podem oferecer diversos benefícios, incluindo a integração cromática, policromatismo, forma anatômica, função, adequado contato proximal e aumento da integridade marginal. Em função desses aspectos, as restaurações de resina composta, aplicadas de forma direta, tendem a ganhar maior longevidade. Assim, o objetivo do presente relato de caso é fornecer ao leitor a visão dos desafios restauradores envolvidos no reparo de uma fratura classe IV de um dente incisivo superior, utilizando-se um novo sistema de resina composta híbrida nanoparticulada (FiltekTM Supreme - 3M ESPE). Resultados: com base no referido material e técnica, otimizamos a obtenção de resultados satisfatórios alcançados por meio da utilização adequada do sistema adesivo e resina composta, mantidos com sucesso após o acompanhamento de 4 anos. Conclusão: pode-se concluir que, interagindo técnica adequada de aplicação, princípios adesivos básicos e materiais de qualidade, o clínico pode garantir o sucesso na restauração da forma, função e estética de dentes anteriores.

Associação de microabrasão e fechamento de diastemas com resina composta: relato de caso clínico

Com o avanço das técnicas e materiais restauradores, o cirurgião-dentista tornou-se capaz de solucionar problemas estéticos de forma conservadora. Esse relato de caso descreve a associação das técnicas de microabrasão e fechamento de diastemas com resinas compostas diretas. A paciente do sexo feminino, 16 anos de idade, foi encaminhada pelo ortodontista à clínica de Dentística Restauradora para o fechamento de diastema. Após anamnese e exame clínico detalhado, constatou-se, também, a presença de manchas brancas de fluorose na face vestibular dos dentes anterossuperiores, sendo também proposto o procedimento de microabrasão. Por meio de modelos de estudo da paciente, foi realizado o enceramento diagnóstico, de forma a simular o fechamento dos diastemas. O modelo encerado foi moldado com silicona de condensação para servir como guia de orientação durante os procedimentos restauradores. O tratamento resultou na elevação da autoestima da paciente, pela obtenção de um sorriso mais harmonioso por meio da associação de técnicas estéticas conservadoras.

Effect of finishing and polishing on color stability of a nanofilled resin immersed in different media

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Preparo e caracterização de compósitos polímero/cerâmica com potencial aplicação como sensor multifuncional

Pós-graduação em Química - IQ

Obtenção e caracterização de compósitos de benzoxazina/fibra de carbono

Pós-graduação em Engenharia Mecânica - FEG

Adesivos multi-uso-avaliação da resistência adesiva a dentina frente a teste de cisalhamento, estereomicroscopia e microscopia eletrônica de varredura

Recent bonding systems have been advocated as multi-purpose bonding agents. The aim of this study was to determine if some of these bonding systems could be associated to composite resins from different manufacturers. This investigation was conducted to test lhe shear bond strength of three bonding systems: Scotchbond Multi-Purpose (3M Dental Products), Optibond Light Cure (Kerr) and Optibond Dual Cure (Kerr), when each of them was associated to lhe composite resins: Z1 00 (3M Dental Products), Prisma - APH (Dentsply) and Herculite XRV (Kerr). Seventy-two flat dentin bonding sites were prepared to 600 grit on human premolars mounted using acrilic resins. The teeth were assigned at random to 9 groups of 8 samples each. A split die with a 3mm diameter was placed over lhe surface of lhe dentin treated with one of lhe adhesive systems, and lhe selected composite resin was inserted and light cured. The split mold was removed and all samples were termocycled and stored in 37ºC water for 24 hours before testing. Shear bond strength was determined using an lnstron Universal testing machine. Some failures were examined under lhe S.E.M. Data was analysed by one-way analysis of variance, that demonstrated a significant difference (p<0,05) in the mean shear bond strength among Optibond Light Cure (15,446 MPa), Scotchbond Multi-Purpose (13,339 MPa) and Optibond Dual Cure (10,019 MPa). These values did not depend on the composite resin used. The association between bonding system/composite resin was statistycally significant (p<0,05) and the best results were obtained when the composite resins Z100 and Herculite were used with the adhesive system Optibond Light Cure, and when the composite resin APH was used with the adhesive system Scotchbond Multi-Purpose

Compósitos preparados a partir de resíduo industrial de couro com elastômeros termoplásticos obtidos através de blendas de polietileno de baixa densidade e borracha natural

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Emprego de ma teriais rest auradores adesivos direto no ângulo incisal de incisivos centrais fra turados

A case report of a patient who presents as chief complaint presence of stained restorations in the anterior teeth. After analysis and discussion of the clinical therapeutic approaches to be adopted, it was observed the presence of type class IV restorations on teeth 11 and 21, due to an oblique coronal fracture in the past. But the patient was not satisfied with the aesthetic result, then where was planned the realization of the removal of the restorations, for subsequently be used direct restorative materials for the correction of form, function and esthetics. The final result showed that the restorations were able to return the form, function and aesthetic dental, thereby evidencing the proven development of restorative dentistry in the solution of aesthetic problems.

Avaliação da termociclagem sobre a estabilidade de cor de diferentes matizes de resina composta

The objective was to evaluate the effect of thermocycling on the color variation of three different composite resins . We studied was Resin Enamel on 3 levels : ( Esthetic X , Opallis and Venus ) ; Resin Dentin in three levels : ( Esthetic X , Opallis and Venus ) and Thermocycling on level 1 : ( 3,000 cycles ) ; variable was the change of color gauged by spectrophotometry . 60 specimens , subdivided into 6 groups were made : GI - Esthetic X Enamel ; GII - Esthetic X dentin ; GIII - Opallis Enamel ; GIV - Opallis dentin ; GV - Enamel and GVI Venus - Venus dentin . The specimens were prepared with a matrix to standardize samples . The inserts of incrementally resins and polymerized with a halogen light Ultralux unit ( Dabi Atlante , Brazil ) with a power of 450mW / cm ² . After fabrication , underwent color reading with a UV Visible Spectrophotometer reflection , UV -2450 ( Shimadzu , Kyoto , Japan ) , with the changes calculated by the system CIE L * a * b * . Then isolates were stored in artificial saliva at 35 ° C ± 2 ° C during 3 months containers being subjected to the effects of thermal cycling for 3000 cycles over the range of 5C to 55C . Again subjected to chromatic evaluation. For the analysis of the results of color change of the studied resins was applied ANOVA two factors at 5 % . The results showed a statistically equal resins enamel GI and GV ( p = 0.79 ) ; the same was not observed for GI and G III resins , where the color change was higher for resin G III ( p = 0.0000002 ) . The same was observed between G III and GV , where the resin enamel G III showed a statistically superior to the color change ( p = 0.0000005 ) Average . Resins to dentin was there a statistical equality between the materials studied . We conclude that the resins studied change in color and resin enamel G III was the most suffered major color changes after aging by thermocycling .

Fechamento de diastemas utilizando restaurações diretas de resina composta

Os diastemas contribuem para a quebra de harmonia dos dentes, comprometendo a beleza do sorriso; os incisivos superiores são os dentes que mais se destacam no sorriso, sendo muito importante a simetria e harmonia entre eles. Para o fechamento dos diastemas, durante muito tempo, as alternativas clínicas foram o emprego da Ortodontia e das próteses fixas. Atualmente, com a evolução dos sistemas adesivos e das resinas compostas, é possível reproduzir as características dos dentes com uma técnica simples, previsível, sem desgaste da estrutura dentária, reversível, com menor custo, proporcionando um resultado satisfatório e imediato. O propósito do presente artigo é apresentar três casos clínicos de fechamento de diastemas generalizados associados ou não a outras alterações que comprometem o sorriso do paciente.

Diastemas: reestablishment of an attractive smile

A healthy and attractive smile is very valued in today s society. Yet this requires better aesthetic and cosmetic solutions from dental surgeons.The present paper presents a case report of diastema closure using an association of tooth movement induced by orthodontic elastics,dental cosmetics and resin-bonded prosthesis. The female patient L.B.A.J., aged 19 years, visited the Integrated Clinic of Araçatuba DentalSchool UNESP mainly complaining of missing teeth and poor esthetics. After anamnesis, clinical and radiographic examination revealedhypodontia of the maxillary right and left first premolars, abnormal maxillary right lateral incisor shape and diastema between the maxillaryright lateral incisor and canine and between the maxillary left lateral incisor and canine. Planning was done which included indication ofdiastema closure with composite resin restoration and metal-free resin-bonded prosthesis, with a structure made of Vectris (Ivoclar VivadentInc., Amherst, NT, USA). The option for dental cosmetics associated with resin-bonded prosthesis after movement with orthodontic elasticsresulted in an excellent aesthetic outcome of low cost and short treatment duration.Indexing terms: composite resins; diastema; fixed resin bonded partial denture.

Avaliação do efeito do plasma não térmico na resistência adesiva à dentina supericial e profunda

Pós-graduação em Odontologia Restauradora - ICT