Determinação de tetraciclinas em leite por cromatografia de camada fina

As tetraciclinas são compostos antibacterianos utilizados em bovinos de leite para tratamento de doenças infecciosas, como a mastite, mas também como aditivos em ração animal. O uso das tetraciclinas pode conduzir à presença de resíduos destes fármacos no leite, principalmente se não forem utilizados de acordo com as indicações, nem respeitado o período mínimo de eliminação dos antibióticos pelo leite. A presença de resíduos de antibióticos no leite interfere no processo industrial dos seus derivados, podendo inviabilizar a produção destes e, consequentemente, causar igualmente prejuízos económicos, como por exemplo, pela inibição de fermentos lácticos que são culturas de microorganismos utilizados na produção de iogurtes, queijos e outros produtos lácteos. Os resíduos de antibióticos no leite de consumo podem representar riscos à saúde humana, podendo causar reacções alérgicas em indivíduos sensíveis ou ter um efeito adverso na flora intestinal humana, prejudicando a sua acção protectora local, além de propiciar a selecção de populações bacterianas resistentes.(Denobile & Nascimento, 2004)

Extreme complementarity in a macrocycle-tweezer complex

Interaction of a novel pyrene-based tweezer molecule with a macrocyclic ether-imide-sulfone results in formation of a strongly bound complex (K-a = 24 000 M-1) in which binding results not only from pi-pi stacking interactions involving pyrene units as donors and macrocyclic naphthalene-tetracarboximide and biphenylenedisulfone groups as acceptors but also from N-(HO)-O-... and C-(HO)-O-... hydrogen bonds and from "reverse" pi-stacking of the electron-poor isophthaloyl residue of the tweezer with an electron-rich 3-aminophenoxy residue of the macrocyclic imide.

Estudo da incorporação de cascalho proveniente da perfuração de poços de petróleo em formulações para tijolos de solo-cimento

The present work is to study the characteristics and technological properties of soil-cement bricks made from binary and ternary mixtures of Portland cement, sand, water, with or without addition of gravel from the drilling of oil wells, which could be used by industry, aiming to improve its performance and reduce cost by using the residue and, consequently, increasing its useful life. The soil-cement bricks are one of the alternatives to masonry construction. These elements, after a short curing period, provide compressive strength similar to that of solid bricks and ceramic blocks, and the higher the resistance the higher the amount of cement used. We used the soil from the city of São José do Mipibu / RN, the banks of the River Baldun, cement CPIIZ-32 and residue of drill cuttings from oil wells drilling onshore wells in the town of Mossley, RN, provided Petrobras. To determine the optimum mix, we studied the inclusion of different residues (100%, 80%, 70%, 60% and 50%) where 15 bodies were made of the test piece. The assessment was made of bricks made from simple compression tests, mass loss by immersion and water absorption. The experimental results proved the efficiency and high utilization of the waste from the drilling of oil wells, making the brick-cement-soil residue with a higher strength and lower water absorption. The best result in terms of mechanical strength and water absorption for the ternary mixture was 10% soil, 14% cement and 80% residue. In terms of binary mixtures, we obtained the best result for the mix-cement residue, which was 14% cement incorporated in the residue

Avaliação da potencialidade dos resíduos de gesso de revestimento incorporados em formulações de massas cerâmicas

In building, during the implementation process of major or even minor works, there is a considerable waste of plaster in the steps of coating, making it is a negative factor because of the loss of these processes constructive remains incorporated into buildings, as component, whose final dimensions are higher than those projected. Another negative factor is the disposal of waste gypsum in inappropriate places, thus contributing to the degradation of environmental quality, due to the leaching of this waste and may trigger the formation of sulfuric acid. Therefore, based on this picture, processing and reuse of waste coating, combined with the ceramics industry, which is a strong potential in the reuse of certain types of waste, promote mutual benefits. Thus the overall objective of this work is to conduct a search with scientific and technological aspects, to determine the effect of the incorporation of the residue of plaster for coating, from the building, the formulation of bodies for red ceramic. The residue of plaster coating was collected and characterized. They were also selected raw materials of two ceramic poles of the state of Rio Grande do Norte and formulations have been made with the intention of obtaining those with the best physical and mechanical properties, the residue was added the percentage of 5%, 10%, 15%, 20%, 25% and 30%, in the best formulation of ceramic industry 1 and, according the properties analyses, 5%, 10% and 15% as the best results of ceramic industry 2. The samples were sintered at temperatures of 850 ºC, 950 °C and 1050 °C, the heating rate of 5 ºC / min with isotherm of two hours. They were submitted to testing technology, such as lineal shrinkage, water absorption, apparent porosity, apparent density and bending resistence. The residue incorporation best results in the formulations of mass in red ceramic, were observed between the temperatures of 850 ºC and 950 ºC, in those formulations that have illite clays and medium plastic in their composition, in the range of 0% to 15% residue incorporated

Concreto celular polimérico: influência na adição de resíduo de poliéster insaturado termofixo

This work addresses the production of lightweight concrete building elements, such as plates, prefabricated slabs for pre-molded and panels of fencing, presenting a singular concrete: the Lightweight Concrete, with special properties such low density and good strength, by means of the joint use of industrial waste of thermosetting unsaturated polyesters and biodegradable foaming agent, named Polymeric Lightweight Concrete. This study covered various features of the materials used in the composition of the Polymeric Lightweight Concrete, using a planning of factorial design 23, aiming at studying of the strength, production, dosage processes, characterization of mechanical properties and microstructural analysis of the transition zone between the light artificial aggregate and the matrix of cement. The results of the mechanical strength tests were analyzed using a computational statistics tool (Statistica software) to understand the behavior and obtain the ideal quantity of each material used in the formula of the Polymeric Lightweight Concrete. The definition of the ideal formula has the purpose of obtaining a material with the lowest possible dry density and resistance to compression in accordance with NBR 12.646/92 (≥ 2.5 MPa after 28 days). In the microstructural characterization by scanning electron microscopy it was observed an influence of the materials in the process of cement hydration, showing good interaction between the wrinkled face of the residue of unsaturated polyesters thermosetting and putty and, consequently, the final strength. The attaining of an ideal formula, given the Brazilian standards, the experimental results obtained in the characterization and comparison of these results with conventional materials, confirmed that the developed Polymeric Lightweight Concrete is suitable for the production of building elements that are advantageous for construction

Adição do resíduo de biomassa da cana-de-açúcar em pastas para cimentação de poços petrolíferos produtores de óleos pesados

The Potiguar basin has large fields of viscous oil where the used method for recovering is based on vapor injection; this operation is carried out by injecting vapor in the oilwell directly, without the protection of a revetment through thermal insulation, what causes its dilation and, consequently, cracks in the cement placed on the annular, and lost of hydraulic insulation; this crack is occasioned by the phenomenon of retrogression of the compressive resistance due to the conversion of the hydrated calcium silicate in phases calcium-rich, caused by the high temperatures in the wells, subjected to thermal recuperation. This work has evaluated the application of composite pastes with addition of residue of biomass of ground sugar-cane bagasse as anti-retrogression mineral admixture for cementation of oil-wells subjected to thermal recuperation. The addition of the mineral residue was carried out considering a relative amount of 10, 20, 30, 40 and 59% in relation to cement mass, trying to improve the microstructure of the paste, still being developed a reference paste only with cement and a paste with addition of 40% of silica flour - renowned material in the oil industry as anti-retrogression additive. Pozzolanic activity of the ash was evaluated through XRD, TG/DTG, as the resistance to compression, and it was also determined the physical and mechanical behavior of the pastes when submitted to cure at low temperatures (22 and 38º C); besides it was evaluated the behavior of the pastes when submitted to two cycles of cure at high temperature (280ºC) and pressure (7 MPa). It was verified that the ash of the sugar-cane biomass presents pozzolanic reaction and has great efficiency in decrease the permeability of the paste by filler effect, as well as that addition of ash in a relative amount of 10, 20 e 30% increases cured compressive resistance at low temperatures. It was also showed that the ash in a relative amount of 40% and 59% has very significant efficiency as anti-retrogression additive, since it prevents the decrease of compressive resistance and forms hydrated calcium silicate type xenotlita and tobermorita which have more resistance and stability in high temperatures

Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.

Estudo da adição de resíduo de scheelita em matriz cerâmica: formulação, propriedades físicas e microestrutura

Extractivism mineral is considered an activity highly degrading, due to the large volume of material that he moves in the form of ore and residues. The vast majority of mining companies do not show any technology or economically viable application that will allow the recycling of mineral residue, these being launched in areas receiving located the "open skies" degrade the environment. In Rio Grande do Norte to the production of ceramic red restricts their activities to the production of products such as: solid bricks, ceramic blocks, tiles, among others. Seeking to unite experiences and technical information that favor sustainable development, with important benefits to the construction sector and civil society in general, the present work studies the incorporation of the residue of scheelite in ceramic matrix kaolinitic, coming from the municipality of Boa Saúde - RN, in percentage of 5 %, 10 %, 20 %, 30% 40% and 50 %, by evaluating its microstructure, physical properties and formulation. The raw materials were characterized through the trials of X ray fluorescence, Diffraction of X rays, Differential Thermal Analysis and Termogravimetric Analysis. The samples were formed and fired at temperatures of 850o, 900o, 1000o, 1050o, 1100o, 1150o and 1200 oC, with isotherm of 1 hour and heating rate of 10 oC/min. Assays were performed technological of loss to fire, Water Absorption, Apparent Porosity, Apparent Density, Mass Loss in Fire and Bending Resistance; in addition to the Scanning Electron Microscopy, analyzing their physical and mechanical properties. The use of residue of scheelite in ceramic mass kaolinitic provided a final product with technological properties that meet the technical standards for the production of bricks and roofing tiles, with the percentage of 20% of waste that showed the best results

Avaliação da incorporação combinada dos resíduos de cascalho de perfuração de poço de petróleo e de polimento do porcelanato em cerâmica vermelha

Among the industries, those that produce ceramic porcelain for use in construction industry and oil, during the exploration and production period, play an important role in the production of waste. Much research has been carried out both by academia and the productive sector, sometimes reintroducing them in the same production line that generated them, sometimes in areas unrelated to their generation, as in the production of concrete and mortar for the construction, for example, but each one in an isolated way. In this research, the aim is to study the combined incorporation of the waste drill cuttings of oil well and the residue of the polishing of porcelain, generated in the final stage of finishing of this product in a clay matrix, for the production of red pottery, specifically bricks, ceramic blocks and tiles. The clay comes from the municipality of São Gonçalo, RN, the drilling waste is from the Natal basin, in Rio Grande do Norte, and the residue of the polishing proceeds from a ceramic porcelain of the State of Paraíba. For this purpose, we used a mixture of a plastic clay with a non-plastic, in a ratio of 50% each, settling formulations with the addition of these two residues in this clay matrix. In the formulations, both residues were incorporated with a minimum percentage of 2.5% and maximum of 12.5%, varying from 2.5% each, in each formulation, which the sum of the waste be no more than 15%. It should be noted that the residue of the polishing of ceramic porcelain is a IIa class (not inert). The materials were characterized by XRF, XRD, TG, DTA, laser granulometry and the plasticity index. The technological properties of water absorption, apparent porosity, linear shrinkage of burning, flexural tensile strength and bulk density were evaluated after the sintering of the pieces to 850 °C, 950 °C and 1050 °C, with a burning time of 3 hr, 3 hr and 30 minutes, and 3 hr and 50 minutes, respectively, with a heating rate of 10 °C/minute, for all formulations and landing of 30 minutes. To better understand the influence of each residue and temperature on the evaluated properties, we used the factorial planning and its surfaces of response for the interpretation of the results. It was found that the temperature has no statistical significance at a 95% of reliability level in flexural tensile strength and that it decreases the water absorption and the porosity, but increases the shrinkage and the bulk density. The results showed the feasibility of the desired incorporation, but adjusting the temperature to each product and formulation, and that the temperatures of 850 °C and 950 °C were the one that responded to the largest number of formulations

Eugenol em juvenis de tilápia do nilo: concentrações e administrações sucessivas

Several anesthetics are used in aquaculture to reduce the stress caused by management. In the field, the most common anesthetic is benzocaine, but several authors are researching about eugenol. The objective of this study were to compare the action of these drugs on the anesthetics stages and measure the effects of successive administration of eugenol on the anesthetics stages in Oreochromis niloticus. In the first test, fish (47.73 +/- 8.73 g and 14.23 +/- 0.81 cm) were subjected to five concentrations of eugenol (40, 60, 80, 100 and 120 mg L-1) and one of benzocaine (100 mg L-1). All the anesthetic concentrations tested were able to induce fish to all stages of anesthesia, and revealed an inverse relationship between the induction times and increased concentrations. The minimum concentration of eugenol to induce anesthesia was 100 mg L-1. In the second test, the juveniles (38.07 +/- 5.00 g and 12.70 +/- 0.54 cm) were exposed to concentrations of 60, 80, 100 mg L-1 of eugenol, as determined in the first test. Evaluating the differences between successive days, there was no significant difference (P > 0.05) between anesthetics stages in the concentrations of eugenol tested, suggesting that the residue of eugenol was removed from the fish in less than 24 hours.

Alterações anatômicas induzidas pelo cálcio na parede celular de frutos de goiabeira

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Componentes da Produção de Forragem em Pastagens dos Capins Tanzânia e Mombaça Adubadas com Quatro Doses de NPK

O trabalho foi conduzido na FCAV-Unesp, em Jaboticabal-SP, para avaliar os efeitos de quatro doses combinadas de NPK sobre os componentes da produção e das perdas de matéria seca (MS) em pastagens dos cultivares Tanzânia e Mombaça de Panicum maximum Jacq., manejadas com 28 dias de descanso e com altura média de 30 cm de resíduo pós-pastejo. As avaliações foram realizadas em parcelas de 96 m² segundo um fatorial 2 (cultivares) x 4 (doses de NPK), em blocos completos ao acaso, com três repetições. As adubações estudadas corresponderam ao decréscimo em 30 % e aos acréscimos em 30 e 60 % de uma dose padrão com 145; 21,6 e 180 kg/ha de N, P2O5 e K2O, respectivamente (referente a 1,2; a 0,08; e a 1,2 % de N, P e K na MS, com produção estimada em 12000 kg/ha). A MS verde (MSV) em pré-pastejo e no resíduo aumentou linearmente com a adubação, com maiores valores obtidos para o cv. Mombaça (9183 e 5227 kg/ha, respectivamente) do que para o cv. Tanzânia (6275 e 3808 kg/ha, respectivamente). A participação de lâminas foliares na MSV em pré-pastejo foi menor no cv. Tanzânia (51 %) do que no cv. Mombaça (54 %). A densidade de perfilhos não variou com a adubação. O aumento do peso de perfilho com a elevação das doses de NPK resultou em maiores produções de MSV. A MS senescida (média de 3108 kg/ha de MS) não diferiu entre cultivares. de modo geral, quanto maior a dose de adubo aplicado, maiores foram a taxa de acúmulo diário de MSV e a MSV perdida por pisoteio. O cv. Mombaça apresentou maior potencial de resposta à adubação do que o cv. Tanzânia, com taxas de lotação de 6,2 e 4,0 UA/ha, respectivamente.

Resposta de mudas de goiabeira a doses e modos de aplicação de fertilizante fosfatado

O presente trabalho objetivou avaliar o desenvolvimento de mudas de goiabeira em resposta a doses e modos de aplicação de fertilizante fosfatado. As mudas de goiabeira foram transplantadas em conjuntos de vasos (sacos plásticos, 18 x 28 cm) geminados, contendo em cada lado 2,8 dm³ do subsolo de um Argissolo (P resina = 1 mg dm-3), de modo que a metade do sistema radicular ficasse em cada vaso. Usou-se um fatorial 2 x 3 x 2 + 1 (testemunha, sem fósforo), em 5 blocos casualizados. As doses de 70; 140 e 280 mg de P dm-3 de solo, na forma de superfosfato triplo, foram aplicadas de dois modos diferentes com relação ao solo (distribuído em todo o volume do solo ou localizado a 1/3 de profundidade) e dois modos diferentes com relação às raízes (dividindo-se a dose igualmente entre os dois vasos do conjunto ou aplicando-se a dose total em um único vaso). Cem dias após o transplante, verificou-se maior acúmulo de P e maior produção de matéria seca nas plantas que receberam adubação fosfatada. As mudas de goiabeira responderam positivamente à adubação fosfatada, sendo a dose próxima de 100 mg de P dm-3 de solo suficiente para o bom desenvolvimento das plantas. Doses acima de 200 mg de P dm-3 promoveram redução do crescimento das mudas de goiabeira. A disponibilização de fósforo à metade ou a todo o sistema radicular da goiabeira não afetou o suprimento desse nutriente às mudas e tampouco o seu desenvolvimento. A aplicação do adubo fosfatado distribuído em todo o volume de solo no vaso proporcionou maior desenvolvimento do sistema radicular e menor desenvolvimento da parte aérea das mudas de goiabeira, comparado à aplicação localizada do adubo a 1/3 de profundidade.

Variáveis biométricas da cana-de-açúcar fertilizada com resíduos orgânico e industrial e irrigada com água servida e potável

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Dinâmica populacional de Triozoida limbata, Costalimaita ferruginea e inimigos naturais em pomar orgânico e convencional de goiaba

We investigated the population dynamics of Triozoida limbata (Hemiptera: Triozidae) and Costalimaita ferruginea (Coleoptera: Chrysomelidae) and its correlation with the population of natural enemies in organic and conventional orchard of guava. The experiments were performed in two distinct orchards of guava in the 2010/2011 harvest. For monitoring pests and natural enemies, we installed five yellow sticky traps in each orchard. To obtain the correlation between population densities of pests with natural enemies, we used Pearson linear correlation analysis (SAS). The population density of T. limbata remained low, and reaches the top in October in organic orchard of guava. The main pest in conventional orchard of guava was T. limbata and population reaches the top several times. The damage caused by T. limbata in new leaves of guava was more pronounced in conventional orchard. There was a low population density of C. ferruginea in both orchards; however we observed that the population reaches the top in November in organic orchard. The species C. ferruginea caused higher damage in young leaves of guava tree in organic orchard. The highest population density of natural enemies was observed in organic orchard, which presented positive correlation between T. limbata and the coccinellid predator Scymnus spp.