Avaliação dos resíduos sólidos gerados no Restaurante Universitário da UNESP de Rio Claro: uma análise do potencial de compostagem

A consequence of population growth is the increased generation of solid waste, which requires environmentally and economically viable suitable disposal sites. The scarcity of such sites makes necessary to adopt non-generation measures, reduction, reuse , recycling and treatment of solid waste before final disposal of waste. This paper presents the quantification and qualification of organic waste generated in each sector of the University Restaurant (UR) , by proposing indicators of waste generation per meal (index of waste) . Then, from the characterization of the waste management practices adopted internally, evaluates the potential deployment of the composting process for organic waste, with signaling for opportunities to improve waste management. The diagnosis of waste generation was made based on data collected during the period of 10 days. The waste were classified into 3 groups (organic, recyclable and waste) in each sector of the restaurant ( pre preparation , kitchen and tray return) . The results reveal that 33 % of the waste generated in the UR currently has the potential to be composted in a suitable place on campus. Every meal served generat approximately 124g of waste, of which 35g are organic waste of the pre preparation sector, 49g are remnants of food in the tray’s return and 40g are other kinds of waste, including recyclable and non recyclable. You can still get a higher percentage of compostable if the trays pre-wash is not performed with detergent and water. To minimize the generation of waste trays can be replaced by plates and skimmers and ladles can be replaced by smaller ones. The food exposed in the counter but not consumed, can be distributed to students after the restaurant is closed so this material would not be disposed in the garbage

Reciclagem de poliestireno expandido: compósito com fibras de algodão para a confecção de placas de circuito impresso

In this work polymeric composites reinforced with cotton fibers, from the textile industry, were developed in order to manufacture printed circuit boards. It was used expanded polystyrene (EPS) as a thermoplastic matrix by melting it. For the obtention of 10% and 15% of fiber volume fraction in cotton fibers composites, it was used wasted cotton fibers as an incentive of recycling and reusing of the domestic and industrial wastes as well as for Expanded Polystyrene(EPS). The mechanical properties of the composites were evaluated by tensile and flexural strength from standardized test methods. Composites were characterized by a Scanning Electron Microscopy (SEM), Thermogravimetry (TG/DTG), Differential Scanning Calorimetry (DSC) and dielectric analysis. The analysis of the results showed that fiber in the composite directly influenced in the thermal and mechanical properties

Reciclagem de poliestireno expandido: compósito com fibras de sisal para confecção de placas de circuito impresso

In this work polystyrene composites reinforced with recycled sisal fibers were processed, in order to apply in the manufacture of printed circuit boards. A thermoplastic matrix of recycled polystyrene was used, this material came from waste expanded polystyrene (EPS) used in appliance's packages. Composites were prepared with 15% and 25% of sisal fibers. To obtain the composites, wasted EPS and natural sisal fibers were chosen, to encourage recycling and reuse of household waste and also the use of renewable resources. The composites were analyzed by standard tensile and flexural test, in order to verify the mechanical properties of the material. The characterization of the composite was done by scanning electron microscopy (SEM) , thermogravimetry (TGA / DTG) , differential scanning calorimetry (DSC) and dielectric analysis . The analysis of the results showed that the percentage of fibers in the composite influences directly the thermal and mechanical properties. Plates with a lower percentage of fibers showed superior properties at a higher percentage. The composite material obtained is easy to process and it's use is feasible for the confection of printed circuit boards, considering it's mechanical, thermal and insulative properties

Desafios ambientais na indústria automobiliística: uma análise do processo de reciclagem e reutilização de materiais

This research has as main objective the analysis of the auto industry has done to reduce disposal of solid waste in its production process as much as to facilitate the recycling of cars after they complete their life cycle. Despite the auto industry is not one of the most polluting in terms of its production process, it produces a good that is causing major pollution. In despite of the great current concern in seeking to reduce the emissions of pollutants by vehicles, as important as the quest for cleaner fuels is the study of how to dispose of old cars. Even if the car production does not increase significantly each year in relative terms, we must consider the fleet of used cars that still circulates in the world. Ending the mammoth “cemeteries” of automobiles, however, it is not so easy, even because the car is composed of various materials, which in many cases are not easily separable. In addition to an overview, the research seeks to examine the possible advances in Brazil related to the process of auto recycling

Plano de gerenciamento sustentável dos resíduos de construção civil. O caso de Rio Claro (SP)

The current problematic of the construction and demolition (C&D) waste faced for the Brazilian cities, is one of the main degradation factors of the environment, over all about the promise of the urban ambient quality. This scenery must mainly to the unsustainable management adopted by the great majority of the Brazilian cities. Therefore, this work aims at to offer subsidies for medium cities, having as study object the city of Rio Claro-SP, (Brazil), in the elaboration of plans and integrated programs of sustainable management of the construction and demolition waste, in accordance with CONAMA Resolution nº 307/2002, that’s set up a sustainable management system of C&D waste. In this direction, the diagnosis of the management was elaborated for the city of Rio Claro, (generation, collects, transport and disposal) and the public administration of the construction and demolition waste, as well as of the study of the related aspects with C&D waste recycling plant. Later, was suggested a plan of improvements for the public manager of C&D waste: areas of temporary disposal to facility the appropriating destination, appropriated areas of final disposal, incentives to the recycling of C&D waste, new legislations, education and orientation programs and adequacy the agents of C&D waste management (generating, transporting, addressee and public manager), directing for an environmental, economic and social sustainability.

O ensino da compostagem e produção de sabão como forma de gerenciamento dos resíduos sólidos domiciliares

Introdução: O adequado gerenciamento dos resíduos sólidos domiciliares (RSD) tem se estabelecido nas últimas décadas como um importante instrumento na diminuição do lixo doméstico destinados aos aterros. A compostagem doméstica e a produção de sabão a partir de óleo usado são alternativas para a reciclagem dos RSD que, ao contrário dos lixos recicláveis, não são explorados comercialmente. Assim, o ensino dessas técnicas para a comunidade pode ser uma ferramenta útil na educação ambiental, disseminando práticas que evitam a destinação final de resíduos sólidos em aterros e desenvolvendo valores para a sustentabilidade. Objetivos: Ensinar formas de reciclagem dos RSD através de técnicas de compostagem e produção de sabão a partir de óleo usado, servindo também como instrumento para promover a educação ambiental, e conscientizar a comunidade sobre a importância de um adequado gerenciamento de resíduos. Métodos: As atividades de ensino consistiram em duas partes, unindo teoria e prática, por meio da apresentação de painéis explicativos sobre compostagem, produção de sabão, e sobre as vantagens decorrentes desses processos seguida da realização das técnicas apresentadas, com a produção de sabão em barra e líquido com óleo usado, e pela montagem de pequenas composteiras em garrafões PET de 5 litros de água mineral reaproveitados. Resultados: As atividades foram realizadas em eventos abertos a sociedade de São José do Rio Preto, tais como a Semana da Tecnologia, em outubro de 2010 e a Semana do Meio Ambiente, em junho de 2011, ambas desenvolvidas no SESC (Serviço Social do Comércio) da cidade. O público foi variado, incluindo desde aposentados e donas de casa até estudantes e profissionais de diversos setores. O interesse em anotar as metodologias explicadas culminou na idéia de produzir um material impresso que contivesse as receitas de sabão (líquido e em barra), os procedimentos e dicas de como realizar a compostagem. A convite de uma escola pública, houve também a apresentação das atividades para pais de alunos e funcionários interessados em aprender as práticas para o adequado gerenciamento dos RSD, levando à discussão das possibilidades de implantação de um projeto de compostagem na própria escola.

Estudo da influência da adição de resíduos de óleo em concretos para aplicação em pavimentos

Pós-graduação em Engenharia Civil - FEIS

Gestão de resíduos sólidos urbanos: contribuições socioambientais de duas cooperativas de catadores de materiais recicláveis na região do Médio Paranapanema

Pós-graduação em Biociências - FCLAS

Avaliação de cenários para a gestão dos resíduos domiciliares na região norte do Vale do Paraíba/SP

Pós-graduação em Engenharia de Produção - FEB

Reciclagem de cavacos para a formação de carbonetos de titânio no metal de solda produzido por soldagem GTAW em aço-carbono

Pós-graduação em Engenharia Mecânica - FEIS

Gestão de resíduos sólidos no município de Tibagi - PR: desempenho da coleta seletiva

The objective of this study was to analyze the performance of solid waste management in the municipality of Tibagi, Paraná, a city with approximately 20000 inhabitants, which implemented the selective collection program called Recycle Tibagi. The analysis was based on descriptive statistical techniques, considering the three types of waste (tailings, organic and recyclable), and per capita generation of garbage upward trend in the coming years, based on the method of Winter (Triple Exponential Damping), using data recorded by the Department of the Environment and the Association of Recyclable Materials from Tibagi - ACAMARTI. Efficient selective collection from a structured environmental education program with constant training conducted with the scavengers, possible to obtain important data in sorting and marketing of recyclable materials, saving raw materials, water and energy, as well as relevant indicators social inclusion and employment generation and income. The project involves several areas of municipal management and arouses curiosity and interest in several areas: social, financial, environmental and administrative. It's a way to encourage new projects and public bodies, highlighting the importance of recycling and proper disposal of solid waste.

Uso da avaliação do ciclo de vida para a determinação na redução de emissões de gases do efeito estufa e do consumo de energia associados a reciclagem de EPS

Pós-graduação em Engenharia Mecânica - FEG

Diagnóstico e gestão dos resíduos gerados em aterro sanitário

The issue of environmental impacts to human health and the generation and disposal of solid waste has led to a change of paradigms for your face, highlighting the need for sustainable management of municipal solid waste (MSW). In this context, the expansion of landfills in Brazil in recent decades makes it necessary to sustainable management of waste generated by this type of enterprise, since its implementation. The aim of this study was to perform a diagnosis of the generation of waste in a landfill, in the expansion phase, and the alternatives adopted for its management. The qualitative diagnosis was made from observations on site and the wastes were classified and quantified from August 2011 to January 2012. In the diagnosis was considered the reduction, reuse and recycle, in that order. The results of this study showed that the residue of the greatest generation was PEAD geomembranes used in the waterproofing of the landfill, reaching 7 t, followed by PVC pipes, which reached 850 kg, both destined for recycling. The largest volume of wastewater generated corresponded to the leachate, reaching 11,500 m3 , which were sent for treatment

Simulação do impacto ambiental de uma proposta de programa de reciclagem no município de Cachoeira Paulista/SP

A reciclagem é uma importante ferramenta para a gestão dos Resíduos Sólidos Domiciliares, como cita a Política Nacional dos Resíduos Sólidos. Assim esta pesquisa visa quantificar o impacto ambiental que um programa de reciclagem, com o objetivo de reciclar 20% dos resíduos passíveis de reciclagem, causaria na cidade de Cachoeira Paulista/SP. Para isso, foi utilizado o Waste Reduction Model para simular os dados e calcular a Emissão dos Gases de Efeito Estufa (MTCO2E e MTCE) e quantidade de Energia (Kwh). Um programa de reciclagem de 20% tem oportunidade de reduzir, em um ano e em relação a situação sem reciclagem, aproximadamente em 49% a quantidade de CO2 e C equivalentes, além de economizar em Kwh o equivalente ao gasto por um mês de energia elétrica de 9400 residências.

A gestão de resíduos da construção civil: iniciativas na bacia hidrográfica Tietê-Jacaré e uma proposta para o município de Bauru (SP)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)