Influência do desponte sôbre a composição do côlmo e do caldo da cana-de-açucar, I. Var. Co 421

I. This paper deals with an experiment carried out to evaluate the effect of the sugar cane upper end on the composition of the sugar cane harvest as a raw material for the sugar industry. The variety studied was Co 421. The authors intend to study other varieties in the future. The data were collected from plant cane, at intervals of two weeks, always from the same field, from a small central area of 3.000 square meters approximately. Sixty (60) stalks were cut in each occasion, randomly chosen from the whole area. They were afterwards separated into three groups of 20 stalks, one for each of the treatments, namely: a) Complete stalks, with no leaves or sheaths. b) Stalks harvested by the technique of REYNOSO, that is, as usually done in practice. c) Stalks with the tops completely cut out, that is, cut by technique of REYNOSO and then with 3 other top internodes eliminated. The treatments caused significant differences on the following technological characteristics: a) Weight b) Cane pol c) Available sucrose (pol) per cent cane d) Cane juice pol e) Saline coefficient of juice. II. Except for weight, all changes were favorable to treatment c, even if with differences relatively slight, in percentage. IIII. Treatment differences for cane fiber, brix, reducing sugars, juice ashes, coefficient of purity and glucose coefficient were not significant. IV. Time of harvest was an important factor affecting the composition of the cane and of the juice. V. On the average the available sucrose of cane for treatments, with an standard error of 0.13%, was: Treatment c 13.05% Treatment b 12.65% Treatment a 12.53% This shows that there is no sound basis for the heavy fines applied by some sugar mills to planters who do not cut low enough the tops of the cane stalks.

Influência do desponte sôbre a composição do colmo e do caldo da cana-de-açúcar: III. Var. CB 41-76

I. This paper deals with an experiment carried out to evaluate the effect of sugar cane upper end on the composition of the stalks and juice of sugar cane harvest as a raw material for the sugar industry. The variety studied was CB 41-76. The data were collected from plant cane at intervals of a two weeks, always from the same field, from a small central area of 3.000 square meters approximately, 60 stalks were cut in each occasion, randomly chosen from the whole area. They were afterwards separated into three groups of 20 stalks one for each of the treatments, namely: a) Complete stalk, with no leaves or sheaths. b) Stalks harvested by the technique of REYNOSO, that is, as usually done in practice. c) Stalks with the tops completely cut out, that is, cut by the techinique of REYNOSO and then with 3 other top internodes eliminated. The treatments caused significant differences on the weight of cane and coefficient of purity of juice, but the percentual differences between the average treatments a and c is 13% and 2%, respectively. II. Treatment differences for cane pol, cane fibre, brix, juice pol, reducing sugars, juice ashes, glucose coefficient, saline coefficient and available sucrose (pol) per cent were not significant. III. Time of harvest was an important factor affecting the composition of the cane and the juice. This paper shows that there is no sound basis for the heavy fines applied some sugar mills to planters who do not cut low enough the tops of the cane stalks.

RNA-based gene duplication sheds new light on mammalian sex chromosome evolution

ABSTRACT : Gene duplication is a fundamental source of raw material for the origin of genetic novelty. It has been assumed for a long time that DNA-based gene duplication was the only source of new genes. Recently however, RNA-based gene duplication (retroposition) was shown in multiple organisms to contribute significantly to their genetic diversity. This mechanism produces intronless gene copies (retrocopies) that are inserted in random genomic position, independent of the position of the parental source genes. In human, mouse and fruit fly, it was demonstrated that the X-linked genes spawned an excess of functional retroposed gene copies (retrogenes). In human and mouse, the X chromosome also recruited an excess of retrogenes. Here we further characterized these interesting biases related to the X chromosome in mammals. Firstly, we have confirmed presence of the aforementioned biases in dog and opossum genome. Then based on the expression profile of retrogenes during various spermatogenetic stages, we have provided solid evidence that meiotic sex chromosome inactivation (MSCI) is responsible for an excess of retrogenes stemming from the X chromosome. Moreover, we showed that the X-linked genes started to export an excess of retrogenes just after the split of eutherian and marsupial mammalian lineages. This suggests that MSCI has originated around this time as well. More fundamentally, as MSCI reflects the spread of recombination barrier between the X and Y chromosomes during their evolution, our observation allowed us to re-estimate the age of mammalian sex chromosomes. Previous estimates suggested that they emerged in the common ancestor of all mammals (before the split of monotreme lineage); whereas, here we showed that they originated around the split of marsupial and eutherian lineages, after the divergence of monotremes. Thus, the therian (marsupial and eutherian) sex chromosomes are younger than previously thought. Thereafter, we have characterized the bias related to the recruitment of genes to the X chromosome. Sexually antagonistic forces are most likely driving this pattern. Using our limited retrogenes expression data, it is difficult to determine the exact nature of these forces but some conclusions have been made. Lastly, we looked at the history of this biased recruitment: it commenced around the split of marsupial and eutherian lineages (akin to the biased export of genes out of the X). In fact, the sexually antagonistic forces are predicted to appear just around that time as well. Thereby, the history of the recruitment of genes to the X, provides an indirect evidence that these forces are responsible for this bias.

Turnover and accumulation of genetic diversity across large time-scale cycles of isolation and connection of populations.

Major climatic and geological events but also population history (secondary contacts) have generated cycles of population isolation and connection of long and short periods. Recent empirical and theoretical studies suggest that fast evolutionary processes might be triggered by such events, as commonly illustrated in ecology by the adaptive radiation of cichlid fishes (isolation and reconnection of lakes and watersheds) and in epidemiology by the fast adaptation of the influenza virus (isolation and reconnection in hosts). We test whether cyclic population isolation and connection provide the raw material (standing genetic variation) for species evolution and diversification. Our analytical results demonstrate that population isolation and connection can provide, to populations, a high excess of genetic diversity compared with what is expected at equilibrium. This excess is either cyclic (high allele turnover) or cumulates with time depending on the duration of the isolation and the connection periods and the mutation rate. We show that diversification rates of animal clades are associated with specific periods of climatic cycles in the Quaternary. We finally discuss the importance of our results for macroevolutionary patterns and for the inference of population history from genomic data.

Biodièsel: impacte en origen del biodièsel consumit a Catalunya i a Espanya

Actualment la situació del mercat espanyol i català del biodièsel es caracteritza per les grans importacions d’oli de palma africana. Per a produir aquesta matèria primera s’estan establint plantacions a gran escala d’Elaeis guineensis (palma africana) a Indonèsia. El monocultiu d’Elaeis guineensis i la producció de l’oli tenen associats grans impactes ambientals i socials. Per una banda, els impactes ambientals són principalment la desforestació, el canvi d’ús del sòl, la pèrdua de biodiversitat, l’erosió del sòl i la contaminació de l’aire, del sòl de l’aigua. Per altra banda, els impactes socials més destacats són la violació dels drets humans dels pobles indígenes, els conflictes d’adquisició de terres i que es compromet la seguretat alimentària del país. Per tant, l’ús del biodièsel produït amb oli de palma africana redueix les emissions de GEH a Espanya i a Catalunya provocant un gran impacte ambiental i social a Indonèsia.

Study of chemical modification of alkaline lignin by the glyoxalation reaction

In this study, glyoxalated alkaline lignins with a non-volatile and non-toxic aldehyde, which can be obtained from several natural resources, namely glyoxal, were prepared and characterized for its use in wood adhesives. The preparation method consisted of the reaction of lignin with glyoxal under an alkaline medium. The influence of reaction conditions such as the molar ratio of sodium hydroxide-to-lignin and reaction time were studied relative to the properties of the prepared adducts. The analytical techniques used were FTIR and 1H-NMR spectroscopies, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Results from both the FTIR and 1H-NMR spectroscopies showed that the amount of introduced aliphatic hydroxyl groups onto the lignin molecule increased with increasing reaction time and reached a maximum value at 10 h, and after they began to decrease. The molecular weights remained unchanged until 10 h of reaction time, and then started to increase, possibly due to the repolymerization reactions. DSC analysis showed that the glass transition temperature (Tg) decreased with the introduction of glyoxal onto the lignin molecule due to the increase in free volume of the lignin molecules. TGA analysis showed that the thermal stability of glyoxalated lignin is not influenced and remained suitable for wood adhesives. Compared to the original lignin, the improved lignin is reactive and a suitable raw material for adhesive formula

The suitability of steam exploded vitis vinifera and alkaline lignin for the manufacture of fiberboard

The main objective of this study was to explore the suitability of Vitis vinifera as a raw material and alkaline lignin as a natural binder for fiberboard manufacturing. In the first step, Vitis vinifera was steam- exploded through a thermo-mechanical vapor process in a batch reactor, and the obtained pulp was dried, ground, and pressed to produce the boards. The effects of pretreatment factors and pressing conditions on the chemical composition of the fibers and the physico-mechanical properties of binderless fiberboards were evaluated, and the conditions that optimize these properties were found. A response surface method based on a central composite design and multiple-response optimization was used. The variables studied and their respective variation ranges were: pretreatment temperature (Tr: 190-210ºC), pretreatment time (tr: 5-10 min), pressing temperature (Tp: 190-210ºC), pressing pressure (Pp: 8-16MPa), and pressing time (tp: 3-7min). The results of the optimization step show that binderless fiberboards have good water resistance and weaker mechanical properties. In the second step, fiberboards based on alkaline lignin and Vitis vinifera pulp produced at the optimal conditions determined for binderless fiberboards were prepared and their physico-mechanical properties were tested. Our results show that the addition of about 15% alkaline lignin leads to the production of fiberboards that fully meet the requirements of the relevant standard specifications

Characterization of alkaline lignins for use in penol-formaldehyde and epoxy resins

Besides polyurethanes and polyesters, phenolic and epoxy resins are the most prominent applications for technical lignins in thermosetting materials. To evaluate the potential application of lignin raw materials in phenol formaldehyde and epoxy resins, three types of alkaline lignins were characterized in terms of their structures and thermal properties. The lignin samples analyzed were kraft lignin (LIG-1), soda–rice straw lignin (LIG-2), and soda-wheat straw lignin (LIG-3). FTIR and 1H-NMR methods were used to determine their structure. Gel permeation chromatography (GPC) was used to determine the molecular weight distribution (MWD). Differential scanning calorimetry (DSC) was used to measure the glass transition temperature (Tg), and thermogravimetric analysis (TGA) to determine the thermal stability of lignin samples. Results showed that kraft lignin (LIG-1) has moderate hydroxyl-group content, is rich in G-type units, and has good thermal stability. These properties make it more suitable for direct use in phenol formaldehyde resins, and it is therefore a good raw material for this purpose. The alkaline soda-rice straw lignin (LIG-2) with a high hydroxyl-group content and excellent thermal stability is most suited to preparing lignin-based epoxy resin

Biopolymers

Plants naturally synthesize a variety of polymers that have been used by mankind as a source of useful biomaterials. For example, cellulose, the main constituent of plant cell wall and the most abundant polymer on earth, has been used for several thousand years as a source of fibers for various fabrics. Similarly, rubber extracted from the bark of the tree Hevea brasiliensis, has been a major source of elastomers until the development of similar synthetic polymers. In the last century, the usefulness of plant polymers as biomaterials has been expanded through the chemical modification of the natural polymers. For example, a number of plastics have been made by substituting the hydroxyl groups present on the glucose moiety of cellulose with larger groups, such as nitrate or acetate, giving rise to materials such as cellulose acetate, a clear plastic used in consumer products such as toothbrush handles and combs. Similarly, starch has been used in the manufacture of plastics by either using it in blends with synthetic polymers or as the main constituent in biodegradable plastics. The advent of transformation and expres- sion of foreign genes in plants has created the possibility of expanding the usefulness of plants to include the synthesis of a range of biomolecules. In view of the capacity of certain crops to produce a large quantity of organic raw material at low cost, such as oils and starch, it is of interest to explore the possibility of using transgenic plants as efficient vectors for the synthesis of biopolymers. Such plant based biopolymers could replace, in part, the synthetic plastics and elastomers produced from petroleum, offering the advantage of renewability and sustainability. Furthermore, being natural pro- ducts, biopolymers are usually biodegradable and can thus contribute to alleviate problems associated with the management of plastic waste. In this article, the emphasis will be on the use of transgenic plants for the synthesis of two novel classes of industrially useful polymers, namely protein based polymers made from natural or artificial genes, and polyhydroxyalkanoates, a family of bacterial poly- esters having the properties of biodegradable plastics and elastomers.

Identificació de marcadors biològics amb potencial per a l’optimització sensorial i tecnològica de la carn de porc i pernil curat

L’aplicació de tecnologies innovadores per a l’anàlisi de la qualitat (proteòmica) i per al processat de productes carnis (envasament actiu i altes pressions hidrostàtiques) amb la finalitat d’optimitzar la qualitat i la seguretat de productes carnis llestos per al consum fou evaluat. Els resultats obtinguts amb l’anàlisi proteòmic van permetre la detecció de pèptids/ proteïnes candidats a marcadors proteics de la qualitat dels lloms i dels pernils. La detecció d’aquests marcadors a la matèria primera (llom i pernil fresc) ajudaria a predir la qualitat final dels productes carnis processats (llom cuit i pernil curat), i proporcionaria una eina per al control de la qualitat de la carn de porc. No obstant, la validació del paper d’aquestes proteïnes a la qualitat final dels productes carnis és necessària abans de poder-los considerar marcadors proteics. Per altra banda, es va estudiar la possiblitat de millorar la seguretat alimentària de llonganissa sense sal afegida obtinguda amb el procés QDS® process a través l’ús de tecnologies innovadores (envasament actiu i altes pressions hidrostàtiques). La llonganissa sense sal afegida no va permetre el creixement de L. monocytogenes. No obstant, el patogen seria capaç de sobreviure durant la vida útil del producte en cas de recontaminació. L’envasament antimicrobià amb la inclusió de nisina com a antimicrobià natural es pot considerar un mètode efectiu per a millorar la seguretat de la llonganissa estudiada. L. monocytogenes va sobreviure al tractament d’alta pressió hidrostàtica (600 MPa, 5 min, 12ºC) gràcies a les característiques del producte de baixa activitat d’aigua i presència de lactat a la seva formulació. Per aquest motiu, la APH no es consideraria un tractament apropiat per a reduir la presència de L. monocytogenes en aquest tipus de producte.

The role of gene duplication in the origin and evolution of new biological functions

Abstract : Gene duplication is an essential source of material for the origin of genetic novelty and the evolution of lineage- or species-specific phenotypic traits. The reverse transcription of source gene mRNA followed by the genomic insertion of the resulting cDNA - retroposition - has provided the human genome with a significant number of gene copies during the last ~63 million years (MYA) of primate evolution. We estimated that at least 1 new functional gene (retrogene) per MYA emerged by retroposition in the primate lineage leading to humans. Using a combination of comparative sequencing and evolutionary simulations, we obtained strong evidence of functionality for 7 primate specific retrogenes. Most of these genes are specifically expressed in testis suggesting that retroposition has contributed with genetic raw material necessary for the evolution ofmale-specific functions in primates. We characterized CDC14Bretro (identified in the previous survey) that originated from the retroposition of a cell cycle gene - CDC14B - in the common ancestor of humans and apes. We demonstrate that CDC14Bretro experienced a period of intense positive selection in the African ape ancestor. By virtue of the amino acid substitutions that occurred during this period CDC 14Bretro adapted to a new subcellular compartment in African apes. Further analyses indicate that this subcellular shift reflects the evolution of anew functional role of CDC 14Bretro. Prompted by this result, we used yeast (Saccharomyces cerevisiae) to investigate on a global scale the extent of functional diversification of duplicate genes through the subcellular adaptation of their encoded proteins. We found that duplicate proteins frequently evolved new cellular localization patterns, either by partitioning of ancestral localizations ("sublocalization"), or more frequently by relocalization to previously unoccupied compartments ("neolocalization"). Interestingly, proteins involved in processes with a wider subcellular distribution more frequently evolved new localization patterns suggesting that subcellular localization changes are dependent on progenitor gene functions. Relocated proteins adapted to their new subcellular environments and evolved new functional roles through changes of their physio-chemical properties, expression levels, and interaction partners. Our work suggests an important role of subcellular adaptation for the emergence of new gene functions.

Genetic and hormonal regulation of cambial development.

The stems and roots of most dicot plants increase in diameter by radial growth, due to the activity of secondary meristems. Two types of meristems function in secondary plant body formation: the vascular cambium, which gives rise to secondary xylem and phloem, and the cork cambium, which produces a bark layer that replaces the epidermis and protects the plant stem from mechanical damage and pathogens. Cambial development, the initiation and activity of the vascular cambium, leads to an accumulation of wood, the secondary xylem tissue. The thick, cellulose-rich cell walls of wood provide a source of cellulose and have the potential to be used as a raw material for sustainable and renewable energy production. In this review, we will discuss what is known about the mechanisms regulating the cambium and secondary tissue development.

Extracção de areia na praia de Calhetona (Ilha de Santiago, Cabo Verde): causas, processos e consequências

A extracção clandestina de areia, nas faixas costeiras e nos leitos das ribeiras, tem sido prática de muitos agregados familiares cabo-verdianos. Nas últimas décadas, a praia de Calhetona (Ilha de Santiago) foi um dos muitos locais que sofreram degradação ambiental significativa, devido à realização desta actividade sem quaisquer planos de extracção e de posterior recuperação das áreas degradadas. Este trabalho, através da conjugação de recolha de dados por inquérito, observação directa e pesquisa documental e bibliográfica, teve como objectivos a caracterização da comunidade (que habita no bairro de Ponta Calhetona) que se dedica à extracção de areia na praia de Calhetona, a descrição da dinâmica da actividade extractiva, a avaliação da percepção que a comunidade tem relativamente às consequências da sua actividade e a descrição do impacte ambiental resultante da extracção de areia. Da análise dos inquéritos, efectuados em Fevereiro de 2012, a 25 chefes de agregados familiares que efectuam a extracção de areia na praia de Calhetona, constata-se que estes são maioritariamente mulheres, predominantemente com idade compreendida entre os 40 e os 59 anos, domésticas, com baixa escolaridade, com famílias numerosas e/ou alargadas a seu cargo e dedicando-se à extração de areia à mais de 10 anos. Os inquiridos, face à situação de vulnerabilidade económica, à falta de emprego e à grande procura de areia para a construção civil, vêem nesta actividade uma fonte de rendimento. Contudo, o proveito obtido desta actividade difícil e potencialmente perigosa é reduzido. Quem efectivamente beneficia são os camionistas que compram a areia a quem procede à extracção e a vendem ao consumidor final pelo dobro do preço. Os inquiridos demonstram uma consciência generalizada dos diversos impactes ambientais negativos resultantes da sua actividade, mas alegam que a extracção de areia é uma das poucas alternativas existentes para providenciar o sustento dos seus agregados familiares. Com base na comparação do estado actual da praia de Calhetona com relatos de habitantes locais, relativos às características da mesma no passado, verifica-se que nos últimos 40-50 anos, desde que se iniciou a intensa extracção de areia nesta praia, o seu aspecto físico se degradou claramente. Essa degradação caracteriza-se principalmente pelo recuo da linha de costa, pela quase ausência de areia e pela salinização dos solos localizados nas proximidades da praia, para além dos consequentes impactes negativos sobre a desova das tartarugas e o turismo balnear.

Effectiveness of fused magnesium potassium phosphate for marandu grass

The current high price of KCl and great dependence on importation to satisfy the Brazilian demand indicate the need for studies that evaluate the efficiency of other K sources, particularly those based on domestic raw material. For this purpose, a greenhouse experiment was conducted with samples of a sandy clay loam Typic Haplustox, in a completely randomized 4 x 3 x 2 factorial design: four K rates (0, 60, 120, and 180 mg kg-1), three sources (potassium chloride (KCl), fused magnesium potassium phosphate (FMPP) and a mixture of 70 % FMPP + 30 % KCl) and two particle sizes (100 and 60 mesh), with three replications. Potassium fertilization resulted in significant increases in shoot dry matter production and in K concentrations, both in soil and plants. The K source and particle size had no significant effect on the evaluated characteristics. Potassium critical levels in the soil and the shoots were 1.53 mmol c dm-3 and 19.1 g kg-1, respectively.

Harvest managements and cultural practices in sugarcane

The presence of trash from the mechanical harvest of green cane on sugarcane plantations promotes changes in the agricultural management, for example, in the mechanical cultural practices of ratoon cane in-between the rows and nitrogen (N) fertilization. The goal of this study was to evaluate the performance of sugarcane in different harvest systems, associated to the mechanical cultural practices in interrows and N rates. The study was carried out on a sugarcane plantation in Sales Oliveira, São Paulo, Brazil, with the sugarcane variety SP81-3250, on soil classified as Acrudox, in a randomized block design with split-split plots and four replications. The main treatments consisted of harvest systems (harvesting green cane or burnt cane), the secondary treatment consisted of the mechanical cultural practices in the interrows and the tertiary treatments were N rates (0, 30, 60, 90, 120 and 160 kg ha-1), using ammonium nitrate (33 % N) as N source. The harvest systems did not differ in sugarcane yield (tons of cane per hectare - TCH), but in burnt cane, the pol percent and total sugar recovery (TSR) were higher. This could be explained by the higher quantity of plant impurities in the harvested raw material in the system without burning, which reduces the processing quality. Mechanical cultural practices in the interrows after harvest had no effect on cane yield and sugar quality, indicating that this operation can be omitted in areas with mechanical harvesting. The application of N fertilizer at rates of 88 and 144 kg ha-1 N, respectively, increased stalk height and TCH quadratically to the highest values for these variables. For the sugar yield per hectare (in pol %), N fertilization induced a linear increase.