The suitability of steam exploded vitis vinifera and alkaline lignin for the manufacture of fiberboard

The main objective of this study was to explore the suitability of Vitis vinifera as a raw material and alkaline lignin as a natural binder for fiberboard manufacturing. In the first step, Vitis vinifera was steam- exploded through a thermo-mechanical vapor process in a batch reactor, and the obtained pulp was dried, ground, and pressed to produce the boards. The effects of pretreatment factors and pressing conditions on the chemical composition of the fibers and the physico-mechanical properties of binderless fiberboards were evaluated, and the conditions that optimize these properties were found. A response surface method based on a central composite design and multiple-response optimization was used. The variables studied and their respective variation ranges were: pretreatment temperature (Tr: 190-210ºC), pretreatment time (tr: 5-10 min), pressing temperature (Tp: 190-210ºC), pressing pressure (Pp: 8-16MPa), and pressing time (tp: 3-7min). The results of the optimization step show that binderless fiberboards have good water resistance and weaker mechanical properties. In the second step, fiberboards based on alkaline lignin and Vitis vinifera pulp produced at the optimal conditions determined for binderless fiberboards were prepared and their physico-mechanical properties were tested. Our results show that the addition of about 15% alkaline lignin leads to the production of fiberboards that fully meet the requirements of the relevant standard specifications

Characterization of alkaline lignins for use in penol-formaldehyde and epoxy resins

Besides polyurethanes and polyesters, phenolic and epoxy resins are the most prominent applications for technical lignins in thermosetting materials. To evaluate the potential application of lignin raw materials in phenol formaldehyde and epoxy resins, three types of alkaline lignins were characterized in terms of their structures and thermal properties. The lignin samples analyzed were kraft lignin (LIG-1), soda–rice straw lignin (LIG-2), and soda-wheat straw lignin (LIG-3). FTIR and 1H-NMR methods were used to determine their structure. Gel permeation chromatography (GPC) was used to determine the molecular weight distribution (MWD). Differential scanning calorimetry (DSC) was used to measure the glass transition temperature (Tg), and thermogravimetric analysis (TGA) to determine the thermal stability of lignin samples. Results showed that kraft lignin (LIG-1) has moderate hydroxyl-group content, is rich in G-type units, and has good thermal stability. These properties make it more suitable for direct use in phenol formaldehyde resins, and it is therefore a good raw material for this purpose. The alkaline soda-rice straw lignin (LIG-2) with a high hydroxyl-group content and excellent thermal stability is most suited to preparing lignin-based epoxy resin

Biopolymers

Plants naturally synthesize a variety of polymers that have been used by mankind as a source of useful biomaterials. For example, cellulose, the main constituent of plant cell wall and the most abundant polymer on earth, has been used for several thousand years as a source of fibers for various fabrics. Similarly, rubber extracted from the bark of the tree Hevea brasiliensis, has been a major source of elastomers until the development of similar synthetic polymers. In the last century, the usefulness of plant polymers as biomaterials has been expanded through the chemical modification of the natural polymers. For example, a number of plastics have been made by substituting the hydroxyl groups present on the glucose moiety of cellulose with larger groups, such as nitrate or acetate, giving rise to materials such as cellulose acetate, a clear plastic used in consumer products such as toothbrush handles and combs. Similarly, starch has been used in the manufacture of plastics by either using it in blends with synthetic polymers or as the main constituent in biodegradable plastics. The advent of transformation and expres- sion of foreign genes in plants has created the possibility of expanding the usefulness of plants to include the synthesis of a range of biomolecules. In view of the capacity of certain crops to produce a large quantity of organic raw material at low cost, such as oils and starch, it is of interest to explore the possibility of using transgenic plants as efficient vectors for the synthesis of biopolymers. Such plant based biopolymers could replace, in part, the synthetic plastics and elastomers produced from petroleum, offering the advantage of renewability and sustainability. Furthermore, being natural pro- ducts, biopolymers are usually biodegradable and can thus contribute to alleviate problems associated with the management of plastic waste. In this article, the emphasis will be on the use of transgenic plants for the synthesis of two novel classes of industrially useful polymers, namely protein based polymers made from natural or artificial genes, and polyhydroxyalkanoates, a family of bacterial poly- esters having the properties of biodegradable plastics and elastomers.

Identificació de marcadors biològics amb potencial per a l’optimització sensorial i tecnològica de la carn de porc i pernil curat

L’aplicació de tecnologies innovadores per a l’anàlisi de la qualitat (proteòmica) i per al processat de productes carnis (envasament actiu i altes pressions hidrostàtiques) amb la finalitat d’optimitzar la qualitat i la seguretat de productes carnis llestos per al consum fou evaluat. Els resultats obtinguts amb l’anàlisi proteòmic van permetre la detecció de pèptids/ proteïnes candidats a marcadors proteics de la qualitat dels lloms i dels pernils. La detecció d’aquests marcadors a la matèria primera (llom i pernil fresc) ajudaria a predir la qualitat final dels productes carnis processats (llom cuit i pernil curat), i proporcionaria una eina per al control de la qualitat de la carn de porc. No obstant, la validació del paper d’aquestes proteïnes a la qualitat final dels productes carnis és necessària abans de poder-los considerar marcadors proteics. Per altra banda, es va estudiar la possiblitat de millorar la seguretat alimentària de llonganissa sense sal afegida obtinguda amb el procés QDS® process a través l’ús de tecnologies innovadores (envasament actiu i altes pressions hidrostàtiques). La llonganissa sense sal afegida no va permetre el creixement de L. monocytogenes. No obstant, el patogen seria capaç de sobreviure durant la vida útil del producte en cas de recontaminació. L’envasament antimicrobià amb la inclusió de nisina com a antimicrobià natural es pot considerar un mètode efectiu per a millorar la seguretat de la llonganissa estudiada. L. monocytogenes va sobreviure al tractament d’alta pressió hidrostàtica (600 MPa, 5 min, 12ºC) gràcies a les característiques del producte de baixa activitat d’aigua i presència de lactat a la seva formulació. Per aquest motiu, la APH no es consideraria un tractament apropiat per a reduir la presència de L. monocytogenes en aquest tipus de producte.

The role of gene duplication in the origin and evolution of new biological functions

Abstract : Gene duplication is an essential source of material for the origin of genetic novelty and the evolution of lineage- or species-specific phenotypic traits. The reverse transcription of source gene mRNA followed by the genomic insertion of the resulting cDNA - retroposition - has provided the human genome with a significant number of gene copies during the last ~63 million years (MYA) of primate evolution. We estimated that at least 1 new functional gene (retrogene) per MYA emerged by retroposition in the primate lineage leading to humans. Using a combination of comparative sequencing and evolutionary simulations, we obtained strong evidence of functionality for 7 primate specific retrogenes. Most of these genes are specifically expressed in testis suggesting that retroposition has contributed with genetic raw material necessary for the evolution ofmale-specific functions in primates. We characterized CDC14Bretro (identified in the previous survey) that originated from the retroposition of a cell cycle gene - CDC14B - in the common ancestor of humans and apes. We demonstrate that CDC14Bretro experienced a period of intense positive selection in the African ape ancestor. By virtue of the amino acid substitutions that occurred during this period CDC 14Bretro adapted to a new subcellular compartment in African apes. Further analyses indicate that this subcellular shift reflects the evolution of anew functional role of CDC 14Bretro. Prompted by this result, we used yeast (Saccharomyces cerevisiae) to investigate on a global scale the extent of functional diversification of duplicate genes through the subcellular adaptation of their encoded proteins. We found that duplicate proteins frequently evolved new cellular localization patterns, either by partitioning of ancestral localizations ("sublocalization"), or more frequently by relocalization to previously unoccupied compartments ("neolocalization"). Interestingly, proteins involved in processes with a wider subcellular distribution more frequently evolved new localization patterns suggesting that subcellular localization changes are dependent on progenitor gene functions. Relocated proteins adapted to their new subcellular environments and evolved new functional roles through changes of their physio-chemical properties, expression levels, and interaction partners. Our work suggests an important role of subcellular adaptation for the emergence of new gene functions.

Genetic and hormonal regulation of cambial development.

The stems and roots of most dicot plants increase in diameter by radial growth, due to the activity of secondary meristems. Two types of meristems function in secondary plant body formation: the vascular cambium, which gives rise to secondary xylem and phloem, and the cork cambium, which produces a bark layer that replaces the epidermis and protects the plant stem from mechanical damage and pathogens. Cambial development, the initiation and activity of the vascular cambium, leads to an accumulation of wood, the secondary xylem tissue. The thick, cellulose-rich cell walls of wood provide a source of cellulose and have the potential to be used as a raw material for sustainable and renewable energy production. In this review, we will discuss what is known about the mechanisms regulating the cambium and secondary tissue development.

Extracção de areia na praia de Calhetona (Ilha de Santiago, Cabo Verde): causas, processos e consequências

A extracção clandestina de areia, nas faixas costeiras e nos leitos das ribeiras, tem sido prática de muitos agregados familiares cabo-verdianos. Nas últimas décadas, a praia de Calhetona (Ilha de Santiago) foi um dos muitos locais que sofreram degradação ambiental significativa, devido à realização desta actividade sem quaisquer planos de extracção e de posterior recuperação das áreas degradadas. Este trabalho, através da conjugação de recolha de dados por inquérito, observação directa e pesquisa documental e bibliográfica, teve como objectivos a caracterização da comunidade (que habita no bairro de Ponta Calhetona) que se dedica à extracção de areia na praia de Calhetona, a descrição da dinâmica da actividade extractiva, a avaliação da percepção que a comunidade tem relativamente às consequências da sua actividade e a descrição do impacte ambiental resultante da extracção de areia. Da análise dos inquéritos, efectuados em Fevereiro de 2012, a 25 chefes de agregados familiares que efectuam a extracção de areia na praia de Calhetona, constata-se que estes são maioritariamente mulheres, predominantemente com idade compreendida entre os 40 e os 59 anos, domésticas, com baixa escolaridade, com famílias numerosas e/ou alargadas a seu cargo e dedicando-se à extração de areia à mais de 10 anos. Os inquiridos, face à situação de vulnerabilidade económica, à falta de emprego e à grande procura de areia para a construção civil, vêem nesta actividade uma fonte de rendimento. Contudo, o proveito obtido desta actividade difícil e potencialmente perigosa é reduzido. Quem efectivamente beneficia são os camionistas que compram a areia a quem procede à extracção e a vendem ao consumidor final pelo dobro do preço. Os inquiridos demonstram uma consciência generalizada dos diversos impactes ambientais negativos resultantes da sua actividade, mas alegam que a extracção de areia é uma das poucas alternativas existentes para providenciar o sustento dos seus agregados familiares. Com base na comparação do estado actual da praia de Calhetona com relatos de habitantes locais, relativos às características da mesma no passado, verifica-se que nos últimos 40-50 anos, desde que se iniciou a intensa extracção de areia nesta praia, o seu aspecto físico se degradou claramente. Essa degradação caracteriza-se principalmente pelo recuo da linha de costa, pela quase ausência de areia e pela salinização dos solos localizados nas proximidades da praia, para além dos consequentes impactes negativos sobre a desova das tartarugas e o turismo balnear.

Effectiveness of fused magnesium potassium phosphate for marandu grass

The current high price of KCl and great dependence on importation to satisfy the Brazilian demand indicate the need for studies that evaluate the efficiency of other K sources, particularly those based on domestic raw material. For this purpose, a greenhouse experiment was conducted with samples of a sandy clay loam Typic Haplustox, in a completely randomized 4 x 3 x 2 factorial design: four K rates (0, 60, 120, and 180 mg kg-1), three sources (potassium chloride (KCl), fused magnesium potassium phosphate (FMPP) and a mixture of 70 % FMPP + 30 % KCl) and two particle sizes (100 and 60 mesh), with three replications. Potassium fertilization resulted in significant increases in shoot dry matter production and in K concentrations, both in soil and plants. The K source and particle size had no significant effect on the evaluated characteristics. Potassium critical levels in the soil and the shoots were 1.53 mmol c dm-3 and 19.1 g kg-1, respectively.

Harvest managements and cultural practices in sugarcane

The presence of trash from the mechanical harvest of green cane on sugarcane plantations promotes changes in the agricultural management, for example, in the mechanical cultural practices of ratoon cane in-between the rows and nitrogen (N) fertilization. The goal of this study was to evaluate the performance of sugarcane in different harvest systems, associated to the mechanical cultural practices in interrows and N rates. The study was carried out on a sugarcane plantation in Sales Oliveira, São Paulo, Brazil, with the sugarcane variety SP81-3250, on soil classified as Acrudox, in a randomized block design with split-split plots and four replications. The main treatments consisted of harvest systems (harvesting green cane or burnt cane), the secondary treatment consisted of the mechanical cultural practices in the interrows and the tertiary treatments were N rates (0, 30, 60, 90, 120 and 160 kg ha-1), using ammonium nitrate (33 % N) as N source. The harvest systems did not differ in sugarcane yield (tons of cane per hectare - TCH), but in burnt cane, the pol percent and total sugar recovery (TSR) were higher. This could be explained by the higher quantity of plant impurities in the harvested raw material in the system without burning, which reduces the processing quality. Mechanical cultural practices in the interrows after harvest had no effect on cane yield and sugar quality, indicating that this operation can be omitted in areas with mechanical harvesting. The application of N fertilizer at rates of 88 and 144 kg ha-1 N, respectively, increased stalk height and TCH quadratically to the highest values for these variables. For the sugar yield per hectare (in pol %), N fertilization induced a linear increase.

SWEET SORGHUM PERFORMANCE AFFECTED BY SOIL COMPACTION AND SOWING TIME AS A SECOND CROP IN THE BRAZILIAN CERRADO

ABSTRACT Increasing attention has recently been given to sweet sorghum as a renewable raw material for ethanol production, mainly because its cultivation can be fully mechanized. However, the intensive use of agricultural machinery causes soil structural degradation, especially when performed under inadequate conditions of soil moisture. The aims of this study were to evaluate the physical quality of aLatossolo Vermelho Distroférrico (Oxisol) under compaction and its components on sweet sorghum yield forsecond cropsowing in the Brazilian Cerrado (Brazilian tropical savanna). The experiment was conducted in a randomized block design, in a split plot arrangement, with four replications. Five levels of soil compaction were tested from the passing of a tractor at the following traffic intensities: 0 (absence of additional compaction), 1, 2, 7, and 15 passes over the same spot. The subplots consisted of three different sowing times of sweet sorghum during the off-season of 2013 (20/01, 17/02, and 16/03). Soil physical quality was measured through the least limiting water range (LLWR) and soil water limitation; crop yield and technological parameters were also measured. Monitoring of soil water contents indicated a reduction in the frequency of water content in the soil within the limits of the LLWR (Fwithin) as agricultural traffic increased (T0 = T1 = T2>T7>T15), and crop yield is directly associated with soil water content. The crop sown in January had higher industrial quality; however, there was stalk yield reduction when bulk density was greater than 1.26 Mg m-3, with a maximum yield of 50 Mg ha-1 in this sowing time. Cultivation of sweet sorghum as a second crop is a promising alternative, but care should be taken in cultivation under conditions of pronounced climatic risks, due to low stalk yield.

Géopatrimoines des trois Chablais. Identification et valorisation des témoins glaciaires

Cette recherche s'applique aux témoins glaciaires des Chablais dans quatre de leurs dimensions : géopatrimoine, connaissance objective, inventaire de géosites et valorisation. Elle est organisée sur le canevas d'un processus de patrimonialisation auquel elle participe et qu'elle interroge à la fois. En 2009, débutait le projet 123 Chablais, pour une durée de quatre ans. Il concernait l'ensemble du territoire chablaisien, réparti sur deux pays (France et Suisse) et trois entités administratives (département de la Haute-Savoie, cantons de Vaud et du Valais). Ce projet, élaboré dans le cadre du programme Interreg IV France-Suisse, avait pour but de dynamiser le développement économique local en s'appuyant sur les patrimoines régionaux. Le géopatrimoine, identifié comme une de ces ressources, faisait donc l'objet de plusieurs actions, dont cette recherche. En parallèle, le Chablais haut-savoyard préparait sa candidature pour rejoindre l'European Geopark Network (EGN). Son intégration, effective dès 2012, a fait de ce territoire le cinquième géoparc français du réseau. Le Geopark du Chablais fonde son identité géologique sur l'eau et la glace, deux thématiques intimement liées aux témoins glaciaires. Dans ce contexte d'intérêt pour le géopatrimoine local et en particulier pour le patrimoine glaciaire, plusieurs missions ont été assignées à cette recherche qui devait à la fois améliorer la connaissance objective des témoins glaciaires, inventorier les géosites glaciaires et valoriser le patrimoine glaciaire. Le premier objectif de ce travail était d'acquérir une vision synthétique des témoins glaciaires. Il a nécessité une étape de synthèse bibliographique ainsi que sa spatialisation, afin d'identifier les lacunes de connaissance et la façon dont ce travail pouvait contribuer à les combler. Sur cette base, plusieurs méthodes ont été mises en oeuvre : cartographie géomorphologique, reconstitution des lignes d'équilibre glaciaires et datations de blocs erratiques à l'aide des isotopes cosmogéniques produits in situ. Les cartes géomorphologiques ont été élaborées en particulier dans les cirques et vallons glaciaires. Les datations cosmogéniques ont été concentrées sur deux stades du glacier du Rhône : le Last Local Glacial Maximum (LLGM) et le stade de Monthey. Au terme de cette étape, les spécificités du patrimoine glaciaire régional se sont révélées être 1) une grande diversité de formes et des liens étroits avec différents autres processus géomorphologiques ; 2) une appartenance des témoins glaciaires à dix grandes étapes de la déglaciation du bassin lémanique. Le second objectif était centré sur le processus d'inventaire des géosites glaciaires. Nous avons mis l'accent sur la sélection du géopatrimoine en développant une approche basée sur deux axes (temps et espace) identifiés dans le volet précédent et avons ainsi réalisé un inventaire à thèmes, composé de 32 géosites. La structure de l'inventaire a également été explorée de façon à intégrer des critères d'usage de ces géosites. Cette démarche, soutenue par une réflexion sur les valeurs attribuées au géopatrimoine et sur la façon d'évaluer ces valeurs, nous a permis de mettre en évidence le point de vue anthropo - et scientifico - centré qui prévaut nettement dans la recherche européenne sur le géopatrimoine. L'analyse des résultats de l'inventaire a fait apparaître quelques caractéristiques du patrimoine glaciaire chablaisien, discret, diversifié, et comportant deux spécificités exploitables dans le cadre d'une médiation scientifique : son statut de « berceau de la théorie glaciaire » et ses liens étroits avec des activités de la vie quotidienne, en tant que matière première, support de loisir ou facteur de risque. Cette recherche a débouché sur l'élaboration d'une exposition itinérante sur le patrimoine glaciaire des Chablais. Ce produit de valorisation géotouristique a été conçu pour sensibiliser la population locale à l'impact des glaciers sur son territoire. Il présente une série de sept cartes de stades glaciaires, encadrées par les deux mêmes thématiques, l'histoire de la connaissance glaciaire d'une part, les témoins glaciaires et la société, d'autre part. -- This research focuses on glacial witnesses in the Chablais area according to four dimensions : geoheritage, objective knowledge, inventory and promotion of geosites. It is organized on the model of an heritage's process which it participates and that it questions both. In 2009, the project 123 Chablais started for a period of four years. It covered the entire chablaisien territory spread over two countries and three administrative entities (département of Haute-Savoie, canton of Vaud, canton of Valais). This project, developed in the framework of the Interreg IV France-Switzerland program, aimed to boost the local development through regional heritage. The geoheritage identified as one of these resources, was therefore the subject of several actions, including this research. In parallel, the French Chablais was preparing its application to join the European Geopark Network (EGN). Its integration, effective since 2012, made of this area the fifth French Geopark of the network. The Chablais Geopark geological identity was based on water and ice, two themes closely linked to the glacial witnesses. In this context of interest for the regional geoheritage and especially for the glacial heritage, several missions have been assigned to this research which should improve objective knowledge of glacial witnesses, inventory and assess glacial geosites. The objective knowledge's component was to acquire a synthetic vision of the glacial witnesses. It required a first bibliography synthesis step in order to identify gaps in knowledge and how this work could help to fill them. On this basis, several methods have been implemented: geomorphological mapping, reconstruction of the equilibrium-line altitude and dating of glacial erratic blocks using cosmogenic isotopes produced in situ. Geomorphological maps have been developed especially in glacial cirques and valleys. Cosmogenic datings were concentrated on two stages of the Rhone glacier: the Last Local Glacial Maximum (LLGM) and « the stage of Monthey ». After this step, the specificities of the regional glacial heritage have emerged to us as 1) a wide variety of forms and links to various other geomorphological processes; 2) belonging of glacial witnesses to ten major glacial stages of Léman Lake's deglaciation. In the inventory of glacial geosites component we focused on the selection of geoheritage. We developed an approach based on two axes (time and space) identified in the preceding components. We obtained a thematic inventory, consisting of 32 geosites. The structure of the inventory was also explored in the aim to integrate use criteria of geosites. This approach, supported by a thought on the values attributed to the geoheritage and how to assess these values allowed us to highlight the point of view much anthropological - and scientific -centered prevailing in the European research on geoheritage. The analysis of the inventory's results revealed some characteristics of chablaisien glacial heritage, discrete, diverse, and with two features exploitable in the context of a scientific mediation: its status as « cradle of the glacial theory » and its close links with activities of daily life, as raw material, leisure support and risk factor. This research leads to the development of a traveling exhibition on the glacial heritage of the Chablais area. It presents a series of seven glacial stage's cards, framed by the two themes mentioned above: « history of glacial knowledge » and « glacial witnesses and society ».

Fate of Hydrophilic Nanoparticles in Biological Environments

The nanoparticles developed are based on chitosan, a biocompatible and biodegradable polysaccharide. The chitosan nanoparticles are formed in an entirely water-based process by electrostatic interactions with other biocompatible molecules. As a prerequisite to understand the fate of such nanoparticles in cells, comprehensive characterization and stability studies serve to identify quantitatively the impact of the raw material characteristics and preparation conditions on the nanoparticle characteristics. Methods included H-1 NMR spectroscopy, dilution viscometry, particle size analysis and electron microscopy. Cytotoxicity and cell uptake experiments on RAW 264.7 murine macrophages and p23 murine endothelial cells were performed to investigate the correlation with nanoparticle characteristics and effect of surface decoration with alginate. Cytotoxicity was assessed by the MTT survival test; cell uptake was monitored by fluorescent microscopy using labeled polymers.

L'evolució del risc del preu de l'IBEX 35 i de l'or de 24 quirats durant el període 2008-2012

En aquest treball es porta a terme l’anàlisi del comportament i l’anàlisi del risc del preu de l’índex borsari IBEX-35 i de la matèria primera Or de 24 quirats, durant el període comprès entre els anys 2008-2012. Concretament s’analitza com han evolucionat determinades mesures del risc, com la Volatilitat, el VaR i el CVaR, en IBEX-35 i en l’Or de 24 quirats. La finalitat d’aquests càlculs, és aconseguir evidencies del diferent comportament del preu de l’IBEX-35 i de l’Or de 24 quirats entre els anys 2008 i 2012, i poder tenir arguments a favor de la idea de que l’Or és un valor refugi, sobretot en temps de crisi.

Cocoa flavonoid-enriched diet modulates systemic and intestinal immunoglobulin synthesis in adult Lewis rats

Previous studies have reported that a diet containing 10% cocoa, a rich source of flavonoids, has immunomodulatory effects on rats and, among others effects, is able to attenuate the immunoglobulin (Ig) synthesis in both systemic and intestinal compartments. The purpose of the present study was focused on investigating whether these effects were attributed exclusively to the flavonoid content or to other compounds present in cocoa. To this end, eight-week-old Lewis rats were fed, for two weeks, either a standard diet or three isoenergetic diets containing increasing proportions of cocoa flavonoids from different sources: one with 0.2% polyphenols from conventional defatted cocoa, and two others with 0.4% and 0.8% polyphenols, respectively, from non-fermented cocoa. Diet intake and body weight were monitored and fecal samples were obtained throughout the study to determine fecal pH, IgA, bacteria proportions, and IgA-coated bacteria. Moreover, IgG and IgM concentrations in serum samples collected during the study were quantified. At the end of the dietary intervention no clear changes of serum IgG or IgM concentrations were quantified, showing few effects of cocoa polyphenol diets at the systemic level. However, in the intestine, all cocoa polyphenol-enriched diets attenuated the age-related increase of both fecal IgA and IgA-coated bacteria, as well as the proportion of bacteria in feces. As these effects were not dependent on the dose of polyphenol present in the diets, other compounds and/or the precise polyphenol composition present in cocoa raw material used for the diets could be key factors in this effect.

Integrating life cycle costs and environmental impacts of composite rail car-bodies for a Korean train

Background, aim, and scope A coupled Life Cycle Costing and life cycle assessment has been performed for car-bodies of the Korean Tilting Train eXpress (TTX) project using European and Korean databases, with the objective of assessing environmental and cost performance to aid materials and process selection. More specifically, the potential of polymer composite car-body structures for the Korean Tilting Train eXpress (TTX) has been investigated. Materials and methods This assessment includes the cost of both carriage manufacturing and use phases, coupled with the life cycle environmental impacts of all stages from raw material production, through carriage manufacture and use, to end-of-life scenarios. Metallic carriages were compared with two composite options: hybrid steel-composite and full-composite carriages. The total planned production for this regional Korean train was 440 cars, with an annual production volume of 80 cars. Results and discussion The coupled analyses were used to generate plots of cost versus energy consumption and environmental impacts. The results show that the raw material and manufacturing phase costs are approximately half of the total life cycle costs, whilst their environmental impact is relatively insignificant (3-8%). The use phase of the car-body has the largest environmental impact for all scenarios, with near negligible contributions from the other phases. Since steel rail carriages weigh more (27-51%), the use phase cost is correspondingly higher, resulting in both the greatest environmental impact and the highest life cycle cost. Compared to the steel scenario, the hybrid composite variant has a lower life cycle cost (16%) and a lower environmental impact (26%). Though the full composite rail carriage may have the highest manufacturing cost, it results in the lowest total life cycle costs and lowest environmental impacts. Conclusions and recommendations This coupled cost and life cycle assessment showed that the full composite variant was the optimum solution. This case study showed that coupling of technical cost models with life cycle assessment offers an efficient route to accurately evaluate economic and environmental performance in a consistent way.