Adaptive, Decentralized, And Real-Time Sampling Strategies For Resource Constrained Hydraulic And Hydrologic Sensor Networks

We discuss the development and performance of a low-power sensor node (hardware, software and algorithms) that autonomously controls the sampling interval of a suite of sensors based on local state estimates and future predictions of water flow. The problem is motivated by the need to accurately reconstruct abrupt state changes in urban watersheds and stormwater systems. Presently, the detection of these events is limited by the temporal resolution of sensor data. It is often infeasible, however, to increase measurement frequency due to energy and sampling constraints. This is particularly true for real-time water quality measurements, where sampling frequency is limited by reagent availability, sensor power consumption, and, in the case of automated samplers, the number of available sample containers. These constraints pose a significant barrier to the ubiquitous and cost effective instrumentation of large hydraulic and hydrologic systems. Each of our sensor nodes is equipped with a low-power microcontroller and a wireless module to take advantage of urban cellular coverage. The node persistently updates a local, embedded model of flow conditions while IP-connectivity permits each node to continually query public weather servers for hourly precipitation forecasts. The sampling frequency is then adjusted to increase the likelihood of capturing abrupt changes in a sensor signal, such as the rise in the hydrograph – an event that is often difficult to capture through traditional sampling techniques. Our architecture forms an embedded processing chain, leveraging local computational resources to assess uncertainty by analyzing data as it is collected. A network is presently being deployed in an urban watershed in Michigan and initial results indicate that the system accurately reconstructs signals of interest while significantly reducing energy consumption and the use of sampling resources. We also expand our analysis by discussing the role of this approach for the efficient real-time measurement of stormwater systems.

Multilayer optimization in radio resource allocation for the packet transmission in wireless networks

In the last decade mobile wireless communications have witnessed an explosive growth in the user’s penetration rate and their widespread deployment around the globe. It is expected that this tendency will continue to increase with the convergence of fixed Internet wired networks with mobile ones and with the evolution to the full IP architecture paradigm. Therefore mobile wireless communications will be of paramount importance on the development of the information society of the near future. In particular a research topic of particular relevance in telecommunications nowadays is related to the design and implementation of mobile communication systems of 4th generation. 4G networks will be characterized by the support of multiple radio access technologies in a core network fully compliant with the Internet Protocol (all IP paradigm). Such networks will sustain the stringent quality of service (QoS) requirements and the expected high data rates from the type of multimedia applications to be available in the near future. The approach followed in the design and implementation of the mobile wireless networks of current generation (2G and 3G) has been the stratification of the architecture into a communication protocol model composed by a set of layers, in which each one encompasses some set of functionalities. In such protocol layered model, communications is only allowed between adjacent layers and through specific interface service points. This modular concept eases the implementation of new functionalities as the behaviour of each layer in the protocol stack is not affected by the others. However, the fact that lower layers in the protocol stack model do not utilize information available from upper layers, and vice versa, downgrades the performance achieved. This is particularly relevant if multiple antenna systems, in a MIMO (Multiple Input Multiple Output) configuration, are implemented. MIMO schemes introduce another degree of freedom for radio resource allocation: the space domain. Contrary to the time and frequency domains, radio resources mapped into the spatial domain cannot be assumed as completely orthogonal, due to the amount of interference resulting from users transmitting in the same frequency sub-channel and/or time slots but in different spatial beams. Therefore, the availability of information regarding the state of radio resources, from lower to upper layers, is of fundamental importance in the prosecution of the levels of QoS expected from those multimedia applications. In order to match applications requirements and the constraints of the mobile radio channel, in the last few years researches have proposed a new paradigm for the layered architecture for communications: the cross-layer design framework. In a general way, the cross-layer design paradigm refers to a protocol design in which the dependence between protocol layers is actively exploited, by breaking out the stringent rules which restrict the communication only between adjacent layers in the original reference model, and allowing direct interaction among different layers of the stack. An efficient management of the set of available radio resources demand for the implementation of efficient and low complexity packet schedulers which prioritize user’s transmissions according to inputs provided from lower as well as upper layers in the protocol stack, fully compliant with the cross-layer design paradigm. Specifically, efficiently designed packet schedulers for 4G networks should result in the maximization of the capacity available, through the consideration of the limitations imposed by the mobile radio channel and comply with the set of QoS requirements from the application layer. IEEE 802.16e standard, also named as Mobile WiMAX, seems to comply with the specifications of 4G mobile networks. The scalable architecture, low cost implementation and high data throughput, enable efficient data multiplexing and low data latency, which are attributes essential to enable broadband data services. Also, the connection oriented approach of Its medium access layer is fully compliant with the quality of service demands from such applications. Therefore, Mobile WiMAX seems to be a promising 4G mobile wireless networks candidate. In this thesis it is proposed the investigation, design and implementation of packet scheduling algorithms for the efficient management of the set of available radio resources, in time, frequency and spatial domains of the Mobile WiMAX networks. The proposed algorithms combine input metrics from physical layer and QoS requirements from upper layers, according to the crosslayer design paradigm. Proposed schedulers are evaluated by means of system level simulations, conducted in a system level simulation platform implementing the physical and medium access control layers of the IEEE802.16e standard.

Food resource utilization of the skates Rioraja agassizii (Müller & Henle, 1841) and Psammobatis extenta (Garman, 1913) on the continental shelf off Ubatuba, South-eastern Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Resource use and coexistence of two syntopic hylid frogs (Anura, Hylidae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A General Framework for the Analysis of Animal Resource Selection from Telemetry Data

We propose a general framework for the analysis of animal telemetry data through the use of weighted distributions. It is shown that several interpretations of resource selection functions arise when constructed from the ratio of a use and availability distribution. Through the proposed general framework, several popular resource selection models are shown to be special cases of the general model by making assumptions about animal movement and behavior. The weighted distribution framework is shown to be easily extended to readily account for telemetry data that are highly auto-correlated; as is typical with use of new technology such as global positioning systems animal relocations. An analysis of simulated data using several models constructed within the proposed framework is also presented to illustrate the possible gains from the flexible modeling framework. The proposed model is applied to a brown bear data set from southeast Alaska.

Mortality associated with discordant responses to antiretroviral therapy in resource-constrained settings

Objectives: We assessed mortality associated with immunologic and virologic patterns of response at 6 months of highly active antiretroviral therapy (HAART) in HIV-infected individuals from resource-limited countries in Africa and South America. Methods: Patients who initiated HAART between 1996 and 2007, aged 16 years or older, and had at least 1 measurement (HIV-1 RNA plasma viral load or CD4 cell count) at 6 months of therapy (3-9 month window) were included. Therapy response was categorized as complete, discordant (virologic only or immunologic only), and absent. Associations between 6-month response to therapy and all-cause mortality were assessed by Cox proportional hazards regression. Robust standard errors were calculated to account for intrasite correlation. Results: A total of 7160 patients, corresponding to 15,107 person-years, were analyzed. In multivariable analysis adjusted for age at HAART initiation, baseline clinical stage and CD4 cell count, year of HAART initiation, clinic, occurrence of an AIDS-defining condition within the first 6 months of treatment, and discordant and absent responses were associated with increased risk of death. Conclusions: Similar to reports from high-income countries, discordant immunologic and virologic responses were associated with intermediate risk of death compared with complete and no response in this large cohort of HIV-1 patients from resource-limited countries. Our results support a recommendation for wider availability of plasma viral load testing to monitor antiretroviral therapy in these settings.

Variability in outcome and resource use in intensive care units

OBJECTIVE: To examine variability in outcome and resource use between ICUs. Secondary aims: to assess whether outcome and resource use are related to ICU structure and process, to explore factors associated with efficient resource use. DESIGN AND SETTING: Cohort study, based on the SAPS 3 database in 275 ICUs worldwide. PATIENTS: 16,560 adults. MEASUREMENTS AND RESULTS: Outcome was defined by standardized mortality rate (SMR). Standardized resource use (SRU) was calculated based on length of stay in the ICU, adjusted for severity of acute illness. Each unit was assigned to one of four groups: "most efficient" (SMR and SRU < median); "least efficient" (SMR, SRU > median); "overachieving" (low SMR, high SRU), "underachieving" (high SMR, low SRU). Univariate analysis and stepwise logistic regression were used to test for factors separating "most" from "least efficient" units. Overall median SMR was 1.00 (IQR 0.77-1.28) and SRU 1.07 (0.76-1.58). There were 91 "most efficient", 91 "least efficient", 47 "overachieving", and 46 "underachieving" ICUs. Number of physicians, of full-time specialists, and of nurses per bed, clinical rounds, availability of physicians, presence of emergency department, and geographical region were significant in univariate analysis. In multivariate analysis only interprofessional rounds, emergency department, and geographical region entered the model as significant. CONCLUSIONS: Despite considerable variability in outcome and resource use only few factors of ICU structure and process were associated with efficient use of ICU. This suggests that other confounding factors play an important role.

Tuberculosis in antiretroviral treatment programs in lower income countries: availability and use of diagnostics and screening

OBJECTIVES In resource-constrained settings, tuberculosis (TB) is a common opportunistic infection and cause of death in HIV-infected persons. TB may be present at the start of antiretroviral therapy (ART), but it is often under-diagnosed. We describe approaches to TB diagnosis and screening of TB in ART programs in low- and middle-income countries. METHODS AND FINDINGS We surveyed ART programs treating HIV-infected adults in sub-Saharan Africa, Asia and Latin America in 2012 using online questionnaires to collect program-level and patient-level data. Forty-seven sites from 26 countries participated. Patient-level data were collected on 987 adult TB patients from 40 sites (median age 34.7 years; 54% female). Sputum smear microscopy and chest radiograph were available in 47 (100%) sites, TB culture in 44 (94%), and Xpert MTB/RIF in 23 (49%). Xpert MTB/RIF was rarely available in Central Africa and South America. In sites with access to these diagnostics, microscopy was used in 745 (76%) patients diagnosed with TB, culture in 220 (24%), and chest X-ray in 688 (70%) patients. When free of charge culture was done in 27% of patients, compared to 21% when there was a fee (p = 0.033). Corresponding percentages for Xpert MTB/RIF were 26% and 15% of patients (p = 0.001). Screening practices for active disease before starting ART included symptom screening (46 sites, 98%), chest X-ray (38, 81%), sputum microscopy (37, 79%), culture (16, 34%), and Xpert MTB/RIF (5, 11%). CONCLUSIONS Mycobacterial culture was infrequently used despite its availability at most sites, while Xpert MTB/RIF was not generally available. Use of available diagnostics was higher when offered free of charge.

Batch scheduling in process industries: an application of resource-constrained project scheduling

The paper deals with batch scheduling problems in process industries where final products arise from several successive chemical or physical transformations of raw materials using multi–purpose equipment. In batch production mode, the total requirements of intermediate and final products are partitioned into batches. The production start of a batch at a given level requires the availability of all input products. We consider the problem of scheduling the production of given batches such that the makespan is minimized. Constraints like minimum and maximum time lags between successive production levels, sequence–dependent facility setup times, finite intermediate storages, production breaks, and time–varying manpower contribute to the complexity of this problem. We propose a new solution approach using models and methods of resource–constrained project scheduling, which (approximately) solves problems of industrial size within a reasonable amount of time.

Patient classification system: An integrated method for measuring nursing intensity and optimizing resource allocation

A patient classification system was developed integrating a patient acuity instrument with a computerized nursing distribution method based on a linear programming model. The system was designed for real-time measurement of patient acuity (workload) and allocation of nursing personnel to optimize the utilization of resources.^ The acuity instrument was a prototype tool with eight categories of patients defined by patient severity and nursing intensity parameters. From this tool, the demand for nursing care was defined in patient points with one point equal to one hour of RN time. Validity and reliability of the instrument was determined as follows: (1) Content validity by a panel of expert nurses; (2) predictive validity through a paired t-test analysis of preshift and postshift categorization of patients; (3) initial reliability by a one month pilot of the instrument in a practice setting; and (4) interrater reliability by the Kappa statistic.^ The nursing distribution system was a linear programming model using a branch and bound technique for obtaining integer solutions. The objective function was to minimize the total number of nursing personnel used by optimally assigning the staff to meet the acuity needs of the units. A penalty weight was used as a coefficient of the objective function variables to define priorities for allocation of staff.^ The demand constraints were requirements to meet the total acuity points needed for each unit and to have a minimum number of RNs on each unit. Supply constraints were: (1) total availability of each type of staff and the value of that staff member (value was determined relative to that type of staff's ability to perform the job function of an RN (i.e., value for eight hours RN = 8 points, LVN = 6 points); (2) number of personnel available for floating between units.^ The capability of the model to assign staff quantitatively and qualitatively equal to the manual method was established by a thirty day comparison. Sensitivity testing demonstrated appropriate adjustment of the optimal solution to changes in penalty coefficients in the objective function and to acuity totals in the demand constraints.^ Further investigation of the model documented: correct adjustment of assignments in response to staff value changes; and cost minimization by an addition of a dollar coefficient to the objective function. ^

Seedling resistance, tolerance and escape from herbivores: insights from co-dominant canopy tree species in a resource-poor African rain forest

* Although plants can reduce the impacts of herbivory in multiple ways, these defensive traits are often studied in isolation and an understanding of the resulting strategies is incomplete. * In the study reported here, empirical evidence was simultaneously evaluated for the three main sets of traits available to plants: (i) resistance through constitutive leaf traits, (ii) tolerance to defoliation and (iii) escape in space, for three caesalpiniaceous tree species Microberlinia bisulcata, Tetraberlinia bifoliolata and T. korupensis, which co-dominate groves within the lowland primary rain forest of Korup National Park (Cameroon). * Mesh cages were placed around individual wild seedlings to exclude insect herbivores at 41 paired canopy gap and understorey locations. After following seedling growth and survival for c. 2 years, caged and control treatments were removed, leaves harvested to determine nutrient and phenolic concentrations, leaf mass per area estimated, and seedling performance in gaps followed for a further c. 2 years to quantify tolerance to the leaf harvesting. * The more nutrient-rich leaves of the weakly shade-tolerant M. bisulcata were damaged much more in gaps than the two strongly shade-tolerant Tetraberlinia species, which had higher leaf mass per area and concentrations of total phenols. Conversely, the faster-growing M. bisulcata was better able to tolerate defoliation in terms of height growth (reflushing capacity), but not at maintaining overall leaf numbers, than the other two species. * Across gaps, insect-mediated Janzen–Connell effects were most pronounced for M. bisulcata, less so for T. korupensis, and not detectable for T. bifoliolata. The three species differed distinctly in their secondary metabolic profiles. * Taken together, the results suggested a conceptual framework linking the three sets of traits, one in which the three co-dominant species adopt different strategies towards herbivore pressure depending on their different responses to light availability. This study is one of the first in a natural forest ecosystem to examine resistance to, tolerance of, and escape from herbivory among a group of co-occurring tropical tree species.

An example of integration between en economic and an hydrologic model in the framework of water resource management problems

Growing scarcity, increasing demand and bad management of water resources are causing weighty competition for water and consequently managers are facing more and more pressure in an attempt to satisfy users? requirement. In many regions agriculture is one of the most important users at river basin scale since it concentrates high volumes of water consumption during relatively short periods (irrigation season), with a significant economic, social and environmental impact. The interdisciplinary characteristics of related water resources problems require, as established in the Water Framework Directive 2000/60/EC, an integrated and participative approach to water management and assigns an essential role to economic analysis as a decision support tool. For this reason, a methodology is developed to analyse the economic and environmental implications of water resource management under different scenarios, with a focus on the agricultural sector. This research integrates both economic and hydrologic components in modelling, defining scenarios of water resource management with the goal of preventing critical situations, such as droughts. The model follows the Positive Mathematical Programming (PMP) approach, an innovative methodology successfully used for agricultural policy analysis in the last decade and also applied in several analyses regarding water use in agriculture. This approach has, among others, the very important capability of perfectly calibrating the baseline scenario using a very limited database. However one important disadvantage is its limited capacity to simulate activities non-observed during the reference period but which could be adopted if the scenario changed. To overcome this problem the classical methodology is extended in order to simulate a more realistic farmers? response to new agricultural policies or modified water availability. In this way an economic model has been developed to reproduce the farmers? behaviour within two irrigation districts in the Tiber High Valley. This economic model is then integrated with SIMBAT, an hydrologic model developed for the Tiber basin which allows to simulate the balance between the water volumes available at the Montedoglio dam and the water volumes required by the various irrigation users.

Sustainability, Resource Efficiency and Competitiveness. An Assessment of Resource Efficiency Policies in the European Union. Bruges European Economic Research Papers (BEER) 32/2015.

Addressing high and volatile natural resource prices, uncertain supply prospects, reindustrialization attempts and environmental damages related to resource use, resource efficiency has evolved into a highly debated proposal among academia, policy makers, firms and international financial institutions (IFIs). In 2011, the European Union (EU) declared resource efficiency as one of its seven flagship initiatives in its Europe 2020 strategy. This paper contributes to the discussions by assessing its key initiative, the Roadmap to a Resource Efficient Europe (EC 2011 571), following two streams of evaluation. In a first step, resource efficiency is linked to two theoretical frameworks regarding sustainability, (i) the sustainability triangle (consisting of economic, social and ecological dimensions) and (ii) balanced sustainability (combining weak and strong sustainability). Subsequently, both sustainability frameworks are used to assess to which degree the Roadmap follows the concept of sustainability. It can be concluded that it partially respects the sustainability triangle as well as balanced sustainability, primarily lacking a social dimension. In a second step, following Steger and Bleischwitz (2009), the impact of resource efficiency on competitiveness as advocated in the Roadmap is empirically evaluated. Using an Arellano–Bond dynamic panel data model reveals no robust impact of resource efficiency on competiveness in the EU between 2004 and 2009 – a puzzling result. Further empirical research and enhanced data availability are needed to better understand the impacts of resource efficiency on competitiveness on the macroeconomic, microeconomic and industry level. In that regard, strengthening the methodologies of resource indicators seem essential. Last but certainly not least, political will is required to achieve the transition of the EU-economy into a resource efficient future.

Availability of the Colchester coal for mining in northern and western Illinois /

This report is the fourth in a series to assess the availability of coal resources for future mining in Illinois.

Resource partitioning in sympatric delphinids: Space use and habitat preferences of Australian snubfin and Indo-Pacific humpback dolphins

1. Many species of delphinids co-occur in space and time. However, little is known of their ecological interactions and the underlying mechanisms that mediate their coexistence. 2. Snubfin Orcaella heinsohni, and Indo-Pacific humpback dolphins Sousa chinensis, live in sympatry throughout most of their range in Australian waters. I conducted boat-based surveys in Cleveland Bay, north-east Queensland, to collect data on the space and habitat use of both species. Using Geographic Information Systems, kernel methods and Euclidean distances I investigated interspecific differences in their space use patterns, behaviour and habitat preferences. 3. Core areas of use (50% kernel range) for both species were located close to river mouths and modified habitat such as dredged channels and breakwaters close to the Port of Townsville. Foraging and travelling activities were the dominant behavioural activities of snubfin and humpback dolphins within and outside their core areas. 4. Their representative ranges (95% kernel range) overlapped considerably, with shared areas showing strong concordance in the space use by both species. Nevertheless, snubfin dolphins preferred slightly shallower (1-2 m) waters than humpback dolphins (2-5 m). Additionally, shallow areas with seagrass ranked high in the habitat preferences of snubfin dolphins, whereas humpback dolphins favoured dredged channels. 5. Slight differences in habitat preferences appear to be one of the principal factors maintaining the coexistence of snubfin and humpback dolphins. I suggest diet partitioning and interspecific aggression as the major forces determining habitat selection in these sympatric species.