On the stability of the RuCl2(triphenylphosphine)(2)(amine) complexes: Ligand substituent effects of cyclic and acyclic amines

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Growth evolution of self-textured ZnO films deposited by magnetron sputtering at low temperatures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento de metodologia de eficiência energética para aplicação em processos industriais de laticínios

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A Qualitative Analysis of Youth Feedback of Nutrition School Enrichment Kits in Lincoln, NE

A Qualitative Analysis of Youth Feedback of Nutrition School Enrichment Kits in Lincoln, NE Richard A. Losey, M.S. University of Nebraska, 2010 Advisor: Wanda M. Koszewski The qualitative analysis of the responses given by students participating in classrooms that used the Nutrition Education Program‟s (NEP) school enrichment kits was the primary focus of this research. Data was collected from the participants in written form. Three major themes appeared during analysis of the data, healthy eating habits, cleanliness and change. The theme of healthy eating habits is comprised of the following sub-themes: breakfast, nutrients, label reading, Food Guide Pyramid/MyPyramid and healthy snacks. Cleanliness is comprised of hand washing and food safety sub-themes. The change theme is made up of change in healthy eating habits, change in cleanliness and change in both healthy eating habits and cleanliness. The data suggests that participating students have made or intend to make changes regarding healthy eating habits and cleanliness, which is the goal of nutrition education. The students‟ responses indicate that the NEP school enrichment kits are effective in increasing the knowledge of students and promoting healthy lifestyle changes.

Submental Endotracheal Intubation: A Valuable Resource for the Management of Panfacial Fractures

Modern techniques for surgical treatment of midfacial and panfacial fractures in maxillofacial trauma lead to special problems for airway management. Usually, in perioperative management of panfacial fractures, the surgeon needs to control the dental occlusion and nasal pyramid assessment. For these reasons, oral and nasal endotracheal intubations are contraindicated for the management of panfacial fractures. Tracheotomy is considered by many as the preferred route for airway management in patients with severe maxillofacial fractures, but there are often perioperative and postoperative complications concerning this technique. The submental route for endotracheal intubation has been proposed as an alternative to tracheotomy in the surgical management of patients with panfacial fractures, besides it is accompanied by low morbidity. Thus, this paper aimed to describe the submental endotracheal intubation technique in a patient experiencing panfacial fracture. The subject was well treated using the submental endotracheal intubation to get good reconstruction of the fractures because the authors obtained free access of all facial fractures.

A three-pronged approach to social business: a Brazilian multi-case analysis

Social businesses present a new paradigm to capitalism, in which private companies, non-profit organizations and civil society create a new type of business with the main objective of solving social problems with financial sustainability and efficiency through market mechanisms. As any new phenomenon, different authors conceptualize social businesses with distinct views. This article aims to present and characterize three different perspectives of social business definitions: the European, the American and that of the emerging countries. Each one of these views was illustrated by a different Brazilian case. We conclude with the idea that all the cases have similar characteristics, but also relevant differences that are more than merely geographical. The perspectives analyzed in this paper provide an analytical framework for understanding the field of social businesses. Moreover, the cases demonstrate that in the Brazilian context the field of social business is under construction and that as such it draws on different conceptual influences to deal with a complex and challenging reality.

The structure of planktonic communities under variable coastal upwelling conditions off Cape Ghir (31ºN), in the Canary Current System (NW Africa)

Universidad de Las Palmas de Gran Canaria. Facultad de Ciencias del Mar. Programa de doctorado en Oceanografía. Diploma de Estudios Avanzados

LBT AO system: tests and calibration

An Adaptive Optic (AO) system is a fundamental requirement of 8m-class telescopes. We know that in order to obtain the maximum possible resolution allowed by these telescopes we need to correct the atmospheric turbulence. Thanks to adaptive optic systems we are able to use all the effective potential of these instruments, drawing all the information from the universe sources as best as possible. In an AO system there are two main components: the wavefront sensor (WFS) that is able to measure the aberrations on the incoming wavefront in the telescope, and the deformable mirror (DM) that is able to assume a shape opposite to the one measured by the sensor. The two subsystem are connected by the reconstructor (REC). In order to do this, the REC requires a “common language" between these two main AO components. It means that it needs a mapping between the sensor-space and the mirror-space, called an interaction matrix (IM). Therefore, in order to operate correctly, an AO system has a main requirement: the measure of an IM in order to obtain a calibration of the whole AO system. The IM measurement is a 'mile stone' for an AO system and must be done regardless of the telescope size or class. Usually, this calibration step is done adding to the telescope system an auxiliary artificial source of light (i.e a fiber) that illuminates both the deformable mirror and the sensor, permitting the calibration of the AO system. For large telescope (more than 8m, like Extremely Large Telescopes, ELTs) the fiber based IM measurement requires challenging optical setups that in some cases are also impractical to build. In these cases, new techniques to measure the IM are needed. In this PhD work we want to check the possibility of a different method of calibration that can be applied directly on sky, at the telescope, without any auxiliary source. Such a technique can be used to calibrate AO system on a telescope of any size. We want to test the new calibration technique, called “sinusoidal modulation technique”, on the Large Binocular Telescope (LBT) AO system, which is already a complete AO system with the two main components: a secondary deformable mirror with by 672 actuators, and a pyramid wavefront sensor. My first phase of PhD work was helping to implement the WFS board (containing the pyramid sensor and all the auxiliary optical components) working both optical alignments and tests of some optical components. Thanks to the “solar tower” facility of the Astrophysical Observatory of Arcetri (Firenze), we have been able to reproduce an environment very similar to the telescope one, testing the main LBT AO components: the pyramid sensor and the secondary deformable mirror. Thanks to this the second phase of my PhD thesis: the measure of IM applying the sinusoidal modulation technique. At first we have measured the IM using a fiber auxiliary source to calibrate the system, without any kind of disturbance injected. After that, we have tried to use this calibration technique in order to measure the IM directly “on sky”, so adding an atmospheric disturbance to the AO system. The results obtained in this PhD work measuring the IM directly in the Arcetri solar tower system are crucial for the future development: the possibility of the acquisition of IM directly on sky means that we are able to calibrate an AO system also for extremely large telescope class where classic IM measurements technique are problematic and, sometimes, impossible. Finally we have not to forget the reason why we need this: the main aim is to observe the universe. Thanks to these new big class of telescopes and only using their full capabilities, we will be able to increase our knowledge of the universe objects observed, because we will be able to resolve more detailed characteristics, discovering, analyzing and understanding the behavior of the universe components.

Dynamik orographischer Bannerwolken

Der Begriff "Bannerwolke" bezeichnet ein eindrucksvolles Phänomen aus dem Bereich der Gebirgsmeteorologie. Bannerwolken können gelegentlich im Hochgebirge im Bereich steiler Bergspitzen oder langgezogener Bergrücken, wie z.B. dem Matterhorn in den Schweizer Alpen oder dem Zugspitzgrat in den Bayrischen Alpen beobachtet werden. Der Begriff bezeichnet eine Banner- oder Fahnen-ähnliche Wolkenstruktur, welche an der windabgewandten Seite des Berges befestigt zu sein scheint, während die windzugewandte Seite vollkommen wolkenfrei ist. Bannerwolken fanden bislang, trotz ihres relativ häufigen Auftretens in der wissenschaftlichen Literatur kaum Beachtung. Entsprechend wenig ist über ihren Entstehungsmechanismus und insbesondere die relative Bedeutung dynamischer gegenüber thermodynamischer Prozesse bekannt. In der wissenschaftlichen Literatur wurden bislang 3 unterschiedliche Mechanismen postuliert, um die Entstehung von Bannerwolken zu erklären. Demnach entstehen Bannerwolken durch (a) den Bernoulli-Effekt, insbesondere durch die lokale adiabatische Kühlung hervorgerufen durch eine Druckabnahme entlang quasi-horizontal verlaufender, auf der windzugewandten Seite startender Trajektorien, (b) durch isobare Mischung bodennaher kälterer Luft mit wärmerer Luft aus höheren Schichten, oder (c) durch erzwungene Hebung im aufsteigenden Ast eines Leerotors. Ziel dieser Arbeit ist es, ein besseres physikalisches Verständnis für das Phänomen der Bannerwolke zu entwickeln. Das Hauptaugenmerk liegt auf dem dominierenden Entstehungsmechanismus, der relativen Bedeutung dynamischer und thermodynamischer Prozesse, sowie der Frage nach geeigneten meteorologischen Bedingungen. Zu diesem Zweck wurde ein neues Grobstruktursimulations (LES)-Modell entwickelt, welches geeignet ist turbulente, feuchte Strömungen in komplexem Terrain zu untersuchen. Das Modell baut auf einem bereits existierenden mesoskaligen (RANS) Modell auf. Im Rahmen dieser Arbeit wurde das neue Modell ausführlich gegen numerische Referenzlösungen und Windkanal-Daten verglichen. Die wesentlichen Ergebnisse werden diskutiert, um die Anwendbarkeit des Modells auf die vorliegende wissenschaftliche Fragestellung zu überprüfen und zu verdeutlichen. Die Strömung über eine idealisierte pyramidenförmige Bergspitze wurde für Froude-Zahlen Fr >> 1 sowohl auf Labor- als auch atmosphärischer Skala mit und ohne Berücksichtigung der Feuchtephysik untersucht. Die Simulationen zeigen, dass Bannerwolken ein primär dynamisches Phänomen darstellen. Sie entstehen im Lee steiler Bergspitzen durch dynamisch erzwungene Hebung. Die Simulationen bestätigen somit die Leerotor-Theorie. Aufgrund des stark asymmetrischen, Hindernis-induzierten Strömungsfeldes können Bannerwolken sogar im Falle horizontal homogener Anfangsbedingungen hinsichtlich Feuchte und Temperatur entstehen. Dies führte zu der neuen Erkenntnis, dass zusätzliche leeseitige Feuchtequellen, unterschiedliche Luftmassen in Luv und Lee, oder Strahlungseffekte keine notwendige Voraussetzung für die Entstehung einer Bannerwolke darstellen. Die Wahrscheinlichkeit der Bannerwolkenbildung steigt mit zunehmender Höhe und Steilheit des pyramidenförmigen Hindernisses und ist in erster Näherung unabhängig von dessen Orientierung zur Anströmung. Simulationen mit und ohne Berücksichtigung der Feuchtephysik machen deutlich, dass thermodynamische Prozesse (insbes. die Umsetzung latenter Wärme) für die Dynamik prototypischer (nicht-konvektiver) Bannerwolken zweitrangig ist. Die Verstärkung des aufsteigenden Astes im Lee und die resultierende Wolkenbildung, hervorgerufen durch die Freisetzung latenter Wärme, sind nahezu vernachlässigbar. Die Feuchtephysik induziert jedoch eine Dipol-ähnliche Struktur im Vertikalprofil der Brunt-Väisälä Frequenz, was zu einem moderaten Anstieg der leeseitigen Turbulenz führt. Es wird gezeigt, dass Gebirgswellen kein entscheidendes Ingredienz darstellen, um die Dynamik von Bannerwolken zu verstehen. Durch eine Verstärkung der Absinkbewegung im Lee, haben Gebirgswellen lediglich die Tendenz die horizontale Ausdehnung von Bannerwolken zu reduzieren. Bezüglich geeigneter meteorologischer Bedingungen zeigen die Simulationen, dass unter horizontal homogenen Anfangsbedingungen die äquivalentpotentielle Temperatur in der Anströmung mit der Höhe abnehmen muss. Es werden 3 notwendige und hinreichende Kriterien, basierend auf dynamischen und thermodynamischen Variablen vorgestellt, welche einen weiteren Einblick in geeignete meteorologische Bedingungen geben.

An investigation into complex inorganic materials with Mössbauer spectroscopy

Mössbauer Spektroskopie ist ein unverzichtbares Instrument für die Bestimmung von Oxidationszuständen und für die Analyse von lokalen Ordnungsphänomenen von Mössbauer aktiven Atomen. Weil es sich um eine lokale Methode handelt können sowohl kristalline als auch amorphe Materialien untersucht werden. Die Kombination von lokaler Prüfung mit Mössbauer Spektroskopie und globaler Untersuchung z.B. mit Röntgendiffraktometrie ermöglicht die Studie von Ordnungseffekten von statistisch besetzten Positionen in einer geordneten Matrix. Das wurde hier eingesetzt um die lokale Umgebung in zwei Serien von Heuslerverbindungen, Co2-xFe1+xSi and Co2Mn1-xFexAl zu untersuchen. Für die Co2Mn1-xFexAl Serie wurde eine L21 geordnete Phase in einer insgesamt B2 geordneten Probe detektiert. Ein Wechsel von der AlCu2Mn zu der CuHg2Ti Struktur wurde für die Co2-xFe1+xSi Proben gefunden. Die Transformation von einem Glas zu einem keramischen Material wurde mit 119Sn Mössbauer Spektroskopie untersucht. Die höhere Ordnung in der Keramik wurde von einer kleiner werdenden Mössbauerlinienbreite begleitet. Demzufolge geben die Modifikationen der Sn Umgebungen klar die Transformation des gesamten Materials wieder. Ist die lokale Umgebung von unregelmäßig auftretenden Atomen in einer amorphen Matrix von Interesse, sind lokal prüfende Methoden die zuverlässigsten Methoden die zur Verfügung stehen. In dieser Arbeit wurde 119Sn Mössbauer Spektroskopie eingesetzt um die Oxidationszustände, die lokalen Umgebungen und relativen Intensitäten von Zinn Atomen in einer Silikatmatrix zu bestimmen. Modifikationen dieser Parameter als Funktion von Prozess bestimmenden Parametern wie der Sauerstoffpartialdruck, die Temperatur, die Behandlungsdauer und der Abkühlprozess genauso wie der SnO2 Gehalt sind von Interesse, weil durch Reduktions- und Diffusionsprozesse Änderungen des Koordinations- und des Oxidationszustands der Zinnatome auftreten. Da diese Änderungen in der Glasmatrix verursachen, die das fertige Produkt im industriellen Fertigungsprozess ruinieren können sind diese feinen Veränderungen sehr wichtig. Wenigstens zwei Mössbauerlinien korrespondierend mit zwei verschiedenen Umgebungen für Sn2+ und Sn4+ sind für eine Analyse mit ausreichender Qualität notwendig. Durch Vergleich von den bestimmten Hyperfein Parametern mit den Parametern von Modelsubstanzen werden lokale Umgebungen der Zinnatome entworfen. Für Sn2+ werden zwei auf einer trigonalen Pyramide basierende Umgebungen mit variierender Anzahl von bindenden und nicht-bindenden Sauerstoffatomen formuliert. Für Sn4+ wurde eine tetraedrische und eine oktaedrische Umgebung postuliert. Die relativen Intensitäten der vier Mössbauerlinien wurden um ein Diffusions- und Reaktionsmodell zu entwickeln und um einen Satz von Diffusions- und Transferkoeffizienten zu bestimmen eingesetzt. Die bestimmten Diffusionskoeffizienten stimmen mit den Literaturdaten überein. Der Massentransferkoeffizient ist kleiner als der bestimmte Wert, aber immer noch in der gleichen Größenordnung. Im Gegensatz zu den Erwartungen ist der präsentierte Diffusionskoeffizient für Sn4+ bestimmt als der von Sn2+. Das wiederum kann durch Berücksichtigung von Elektronhoppingprozessen erklärt werden.

Fighting corruption with pyramids: A Law and Economics approach to combating corruption in post-socialist countries

Corruption is, in the last two decades, considered as one of the biggest problems within the international community, which harms not only a particular state or society but the whole world. The discussion on corruption in law and economics approach is mainly run under the veil of Public choice theory and principal-agent model. Based on this approach the strong international initiatives taken by the UN, the OECD and the Council of Europe, provided various measures and tools in order to support and guide countries in their combat against corruption. These anti-corruption policies created a repression -prevention-transparency model for corruption combat. Applying this model, countries around the world adopted anti-corruption strategies as part of their legal rules. Nevertheless, the recent researches on the effects of this move show non impressive results. Critics argue that “one size does not fit all” because the institutional setting of countries around the world varies. Among the countries which experience problems of corruption, even though they follow the dominant anti-corruption trends, are transitional, post-socialist countries. To this group belong the countries which are emerging from centrally planned to an open market economy. The socialist past left traces on institutional setting, mentality of the individuals and their interrelation, particularly in the domain of public administration. If the idiosyncrasy of these countries is taken into account the suggestion in this thesis is that in public administration in post-socialist countries, instead of dominant anti-corruption scheme repression-prevention-transparency, corruption combat should be improved through the implementation of a new one, structure-conduct-performance. The implementation of this model is based on three regulatory pyramids: anti-corruption, disciplinary anti-corruption and criminal anti-corruption pyramid. This approach asks public administration itself to engage in corruption combat, leaving criminal justice system as the ultimate weapon, used only for the very harmful misdeeds.

Securities: Its Conception and Protection of Interests of its Holders

Theoretical studies of the problems of the securities markets in the Russian Federation incline to one or other of the two traditional approaches. The first consists of comparing the definition of "valuable paper" set forth in the current legislation of the Russian Federation, with the theoretical model of "Wertpapiere" elaborated by German scholars more than 90 years ago. The problem with this approach is, in Mr. Pentsov's opinion, that any new features of the definition of "security" that do not coincide with the theoretical model of "Wertpapiere" (such as valuable papers existing in non-material, electronic form) are claimed to be incorrect and removed from the current legislation of the Russian Federation. The second approach works on the basis of the differentiation between the Common Law concept of "security" and the Civil Law concept of "valuable paper". Mr. Pentsov's research, presented in an article written in English, uses both methodological tools and involves, firstly, a historical study of the origin and development of certain legal phenomena (securities) as they evolved in different countries, and secondly, a comparative, synchronic study of equivalent legal phenomena as they exist in different countries today. Employing the first method, Mr. Pentsov divided the historical development of the conception of "valuable paper" in Russia into five major stages. He found that, despite the existence of a relatively wide circulation of valuable papers, especially in the second half of the 19th century, Russian legislation before 1917 (the first stage) did not have a unified definition of valuable paper. The term was used, in both theoretical studies and legislation, but it covered a broad range of financial instruments such as stocks, bonds, government bonds, promissory notes, bills of exchange, etc. During the second stage, also, the legislation of the USSR did not have a unified definition of "valuable paper". After the end of the "new economic policy" (1922 - 1930) the stock exchanges and the securities markets in the USSR, with a very few exceptions, were abolished. And thus during the third stage (up to 1985), the use of valuable papers in practice was reduced to foreign economic relations (bills of exchange, stocks in enterprises outside the USSR) and to state bonds. Not surprisingly, there was still no unified definition of "valuable paper". After the beginning of Gorbachev's perestroika, a securities market began to re-appear in the USSR. However, the successful development of securities markets in the USSR was retarded by the absence of an appropriate regulatory framework. The first effort to improve the situation was the adoption of the Regulations on Valuable Papers, approved by resolution No. 590 of the Council of Ministers of the USSR, dated June 19, 1990. Section 1 of the Regulation contained the first statutory definition of "valuable paper" in the history of Russia. At the very beginning of the period of transition to a market economy, a number of acts contained different definitions of "valuable paper". This diversity clearly undermined the stability of the Russian securities market and did not achieve the goal of protecting the investor. The lack of unified criteria for the consideration of such non-standard financial instruments as "valuable papers" significantly contributed to the appearance of numerous fraudulent "pyramid" schemes that were outside of the regulatory scheme of Russia legislation. The situation was substantially improved by the adoption of the new Civil Code of the Russian Federation. According to Section 1 of Article 142 of the Civil Code, a valuable paper is a document that confirms, in compliance with an established form and mandatory requisites, certain material rights whose realisation or transfer are possible only in the process of its presentation. Finally, the recent Federal law No. 39 - FZ "On the Valuable Papers Market", dated April 22 1996, has also introduced the term "emission valuable papers". According to Article 2 of this Law, an "emission valuable paper" is any valuable paper, including non-documentary, that simultaneously has the following features: it fixes the composition of material and non-material rights that are subject to confirmation, cession and unconditional realisation in compliance with the form and procedure established by this federal law; it is placed by issues; and it has equal amount and time of realisation of rights within the same issue regardless of when the valuable paper was purchased. Thus the introduction of the conception of "emission valuable paper" became the starting point in the Russian federation's legislation for the differentiation between the legal regimes of "commercial papers" and "investment papers" similar to the Common Law approach. Moving now to the synchronic, comparative method of research, Mr. Pentsov notes that there are currently three major conceptions of "security" and, correspondingly, three approaches to its legal definition: the Common Law concept, the continental law concept, and the concept employed by Japanese Law. Mr. Pentsov proceeds to analyse the differences and similarities of all three, concluding that though the concept of "security" in the Common Law system substantially differs from that of "valuable paper" in the Continental Law system, nevertheless the two concepts are developing in similar directions. He predicts that in the foreseeable future the existing differences between these two concepts will become less and less significant. On the basis of his research, Mr. Pentsov arrived at the conclusion that the concept of "security" (and its equivalents) is not a static one. On the contrary, it is in the process of permanent evolution that reflects the introduction of new financial instruments onto the capital markets. He believes that the scope of the statutory definition of "security" plays an extremely important role in the protection of investors. While passing the Securities Act of 1933, the United States Congress determined that the best way to achieve the goal of protecting investors was to define the term "security" in sufficiently broad and general terms so as to include within the definition the many types of instruments that in the commercial world fall within the ordinary concept of "security' and to cover the countless and various devices used by those who seek to use the money of others on the promise of profits. On the other hand, the very limited scope of the current definition of "emission valuable paper" in the Federal Law of the Russian Federation entitled "On the Valuable Papers Market" does not allow the anti-fraud provisions of this law to be implemented in an efficient way. Consequently, there is no basis for the protection of investors. Mr. Pentsov proposes amendments which he believes would enable the Russian markets to become more efficient and attractive for both foreign and domestic investors.

BrainMaps.org - Interactive High-Resolution Digital Brain Atlases and Virtual Microscopy

BrainMaps.org is an interactive high-resolution digital brain atlas and virtual microscope that is based on over 20 million megapixels of scanned images of serial sections of both primate and non-primate brains and that is integrated with a high-speed database for querying and retrieving data about brain structure and function over the internet. Complete brain datasets for various species, including Homo sapiens, Macaca mulatta, Chlorocebus aethiops, Felis catus, Mus musculus, Rattus norvegicus, and Tyto alba, are accessible online. The methods and tools we describe are useful for both research and teaching, and can be replicated by labs seeking to increase accessibility and sharing of neuroanatomical data. These tools offer the possibility of visualizing and exploring completely digitized sections of brains at a sub-neuronal level, and can facilitate large-scale connectional tracing, histochemical and stereological analyses.

Quasi-Convolution Pyramidal Blurring

Efficient image blurring techniques based on the pyramid algorithm can be implemented on modern graphics hardware; thus, image blurring with arbitrary blur width is possible in real time even for large images. However, pyramidal blurring methods do not achieve the image quality provided by convolution filters; in particular, the shape of the corresponding filter kernel varies locally, which potentially results in objectionable rendering artifacts. In this work, a new analysis filter is designed that significantly reduces this variation for a particular pyramidal blurring technique. Moreover, the pyramidal blur algorithm is generalized to allow for a continuous variation of the blur width. Furthermore, an efficient implementation for programmable graphics hardware is presented. The proposed method is named “quasi-convolution pyramidal blurring” since the resulting effect is very close to image blurring based on a convolution filter for many applications.

3D printing and its applications

Eine zunehmende Anzahl von Artikeln in Publikumszeitschriften und Journalen rückt die direkte Herstellung von Bauteilen und Figuren immer mehr in das Bewusstsein einer breiten Öffentlichkeit. Leider ergibt sich nur selten ein einigermaßen vollständiges Bild davon, wie und in welchen Lebensbereichen diese Techniken unseren Alltag verändern werden. Das liegt auch daran, dass die meisten Artikel sehr technisch geprägt sind und sich nur punktuell auf Beispiele stützen. Dieser Beitrag geht von den Bedürfnissen der Menschen aus, wie sie z.B. in der Maslow’schen Bedürfnispyramide strukturiert dargestellt sind und unterstreicht dadurch, dass 3D Printing (oder Additive Manufacturing resp. Rapid Prototyping) bereits alle Lebensbereiche erfasst hat und im Begriff ist, viele davon zu revolutionieren.