Remoção de compósito e análise da superfície de esmalte, após a descimentação de brackets ortodônticos: estudo in vitro

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz

Retificação plana tangencial dos ferros fundidos nodular, vermicular e cinzento em várias condições de corte

In a scenario of increasing competitiveness of the global industrial sector and with a consumer market increasingly demanding, there is an increased demand for new materials and, consequently, possibilities to explore new research and technological advances towards the development of new manufacturing methods or the improvement of existing technologies. In the case of cast irons, new grades of them have been developed so that their mechanical properties have been improved, making them more competitive with steel, expanding the applications and thus represents great economic gain for metallurgy and manufacturing sectors. This increases the interest and creates new opportunities to study these materials and identify how they respond in terms of the surface integrity, tool wear, cutting forces, among others, when machined by grinding operation. In this context, due to the lack of results from grinding of cast irons and studies comparing grindability among several grades of cast irons found in the literature, this work aims to generate scientific and technological contribution to the metallurgical and metal working sector through roughness results (Ra and Rz parameters) and evaluation and analysis of the subsurface integrity of three cast iron grades (gray, compacted graphite and nodular). The machining trials were performed on a surface grinding machine with silicon carbide grinding wheel at different cutting conditions. The input variables were the radial depth of cut (15 and 30 μm), worktable speed, vw (5 and 10 m/min) and the abrasive grain size of the grinding wheel. The results showed that surface roughness increased with the radial depth of cut for all materials tested; and the lowest values were obtained for gray cast iron. Also, roughness was sensitive to variation of worktable speed and the lowest values were obtained after machining with vw = 5 m/min. With respect to the abrasive grain size, as it decreased the roughness values increased to gray and nodular cast iron grades. Furthermore, grinding burns marks were observed on the surfaces of nodular cast iron and compacted graphite iron grades after grinding the smallest grain size, contrary to what is usually reported in literature. However, no evidence of severe thermal damages below the machined surfaces of all cast iron grades was observed after analyzing the results of hardness and the SEM micrograph images.

Inter-relação entre lesão cervical não cariosa e comprometimento periodontal: diagnóstico, tratamento e previsibilidade - estudo clínico prospectivo e laboratorial

The coexistence of gingival recession (GR) with root coverage indication and non-carious cervical lesions (LCNC) generates the need for a protocol that respects and promotes health of dental and periodontal tissues and allows treatment predictability. The main objectives of this theses were: (1) verify, through clinical evaluations, the connective tissue graft for root coverage on direct and indirect restorations made of ceramic resin; (2) analyze the influence of the battery level of the LED curing unit in the composite resin characteristics; (3) assess the influence of restorative materials, composite resin and ceramics, on the viability of gingival fibroblasts from primary culture. Nine patients with good oral hygiene and occlusal stability diagnosed with LCNCs the anterior teeth including premolars associated with gingival recession (class I and II of Miller) and only gingival recession were selected. After initial clinical examination, occlusal adjustment was performed and the patients had their teeth randomized allocated on direct composite resin restoration of LCNC, polishing and GR treatment with connective tissue graft and advanced coronally flap CR group (n = 15); and indirect ceramic restoration of the LCNC's and GR treatment (CTG+CAF) Group C (n = 15). The GR presented teeth with no clinically formed LCNCs cavity were treated using (CTG+CAF) being the control group (n = 15). Sorption and solubility tests, analysis of the degree of conversion and diametral tensile strength were performed in composite resin samples (n = 10) photoactivated by 100, 50 and 10% battery charge LED unit. The viability of fibroblasts on composite resin, ceramics and dentin disks (n = 3) was examined. Clinical follow-up was performed for three months. The data obtained at different stages were tabulated and subjected to analysis for detection of normal distribution and homogeneity. The results showed that: the LED unit with 10% battery affects the characteristics of the composite resin; restorative materials present biocompatibility with gingival fibroblasts; and the association of surgical and restorative treatment of teeth affected by NCCL and GR presents successful results at 3-month follow-up.

Estudo das características físico-químicas e biológicas pela adesão de osteoblastos em superfícies de titânio modificadas pela nitretação em plasma

SILVA, J. S. P. Estudo das características físico-químicas e biológicas pela adesão de osteoblastos em superfícies de titânio modificadas pela nitretação em plasma. 2008. 119 f. Tese (Doutorado) - Faculdade de Medicina, Universidade de São Paulo. São Paulo, 2008.

Estudo das características físico-químicas e biológicas pela adesão de osteoblastos em superfícies de titânio modificadas pela nitretação em plasma

SILVA, J. S. P. Estudo das características físico-químicas e biológicas pela adesão de osteoblastos em superfícies de titânio modificadas pela nitretação em plasma. 2008. 119 f. Tese (Doutorado) - Faculdade de Medicina, Universidade de São Paulo. São Paulo, 2008.

Isolado protéico de farelo de arroz: obtenção, propriedades funcionais e aplicação

O arroz é o segundo cereal mais produzido no mundo e para que ele seja consumido é necessário o processo de beneficiamento, onde é retirada a casca, e com o polimento, o farelo. O farelo, após a retirada do óleo, é utilizado para alimentação animal, mas como corresponde a 8% do grão, são necessárias novas alternativas para o uso do mesmo, uma vez que contém em torno de 17% de proteína. As proteínas do farelo de arroz são consideradas de alta qualidade, hipoalergênicas e anticancerígenas. Devido ao excesso de fibras presentes no farelo, este não é utilizado diretamente na alimentação humana, podendo ser usado como fonte para a obtenção de extratos, concentrados ou isolados. A obtenção do isolado protéico pode ser por via química, que consiste na extração alcalina ou ácida, seguida de precipitação no ponto isoelétrico ou via enzimática, com o uso de enzimas amilolíticas, hemicelulases e carboidrases para a separação das proteínas. O objetivo deste estudo foi obter um isolado protéico a partir de farelo de arroz visando a inclusão deste em produto de panificação. Foi obtido isolado protéico pelo método químico que foi analisado pelo rendimento protéico, pelas propriedades funcionais, perfil aminoacídico, eletroforese e características térmicas. O isolado foi adicionado em bolos em diferentes concentrações sendo avaliado pelas características tecnológicas e sensoriais. O isolado protéico do farelo de arroz (IPFA) que apresentou maior rendimento protéico foi o obtido pelo método químico, com o farelo de granulometria de 42 mesh e desengordurado. Em relação às propriedades funcionais, foi verificado que o IPFA possui maior solubilidade e capacidade de retenção de água em pH 11, alta capacidade emulsificante e alta capacidade de formação de espuma. No aminograma, constatou-se que os aminoácidos encontrados no IPFA atendem as necessidades de bebês e crianças. No perfil eletroforético, o IPFA apresentou 3 grupos de proteínas. Na análise térmica com DSC, o IPFA apresentou alta temperatura de desnaturação e baixo valor de entalpia. Na elaboração dos bolos, à medida que foi adicionado o IPFA, aumentou o teor protéico, o pH e o volume específico e diminuiu o colapso, a luminosidade e a firmeza dos bolos. Na análise sensorial, os bolos com IPFA não apresentaram diferenças estatísticas do bolo controle (sem IPFA). Estes resultados indicam a potencialidade do IPFA em produtos de panificação.

Avaliação do potencial da macrófita Pistia stratiotes na exposição de íon cromo (VI): biossorção e tolerância

The environmental pollution caused by industries has increased the concentration of pollutants in the environment, especially in water. Among the most diverse contaminants, there is the metals, who may or may not to be heavy/toxic, causing effluent of difficult treatment when in low concentrations. The search for alternative measures of wastewater effluent treatment has led to studies using phytoremediation technique through the various matrices (plant, fungi, bacteria) as means of polishing treatment to remove contaminants by means of biosorption/bioaccumulation. In order to use the phytoremediation technique for removing metals of the environmental, it have been performed bioassay with the macrophyte Pistia stratiotes. The bioassays were realized with healthy plants of P. stratiotes acclimatized in a greenhouse, at room temperature and lighting conditions during 28 days of cultivate. The cultivations were performed in glass vessels containing 1 L of the hydroponic solution with chromium (VI) in the potassium dichromate form with concentration range 0.10 to 4.90 mg L-1. The experiments were performed by Outlining Central Composite Rotational (OCCR), where the kinetics of bioaccumulation and chlorophyll a fluorescence were monitored in plants of P. stratiotes during cultivation. The collections of the samples and cultive solution were performed according to the OCCR. The chromium levels were measured in samples of P. stratiotes and the remaining solutions by the methodology of atomic absorption spectrometry by flame. The tolerance of P. stratiotes in relation to exposure to chromium (VI) was analyzed by parameters of physiological activity by means of chlorophyll a fluorescence, using the portable fluorometer PAM (Pulse Amplitude Modulation). The development of P. stratiots and their biomass were related to the time factor, while bioaccumulation capacities were strongly influenced by factors of time and chromium concentration (VI). The chlorophyll fluorescence parameters were affected by chromium and the exposure time at the bioassays. It was obtained an higher metal removal from the root in relation to the sheet, reaching a high rate of metal removal in solution. The experimental data removal kinetics were represented by kinetic models Irreversibly Langmuir, Reversible Langmuir, Pseudo-first Order and Pseudo-second Order, and the best fit for the culture solution was the Reversible Langmuir model with R² 0.993 and for the plant the best model was Pseudo-second order with R² 0.760.

Comportamento ao desgaste erosivo de um aço inoxidável utilizado em hélice de moto aquática

Dissertação (mestrado)—Universidade de Brasília, Faculdade UnB Gama, Programa de Pós-graduação em Integridade de Materiais da Engenharia, 2015.

Efecto del ejercicio de tiro y arrastre sobre el eje renina-angiotensina-aldosterona y cociente testosterona/cortisol en caballos euhidratados y deshidratados

Introducción. El estado hídrico previo al inicio de un ejercicio (hiperhidratación-deshidratación o hipohidratación y euhidratación) modifica la respuesta neurohumoral. En personas, la deshidratación origina una liberación incrementada de las hormonas implicadas en el mantenimiento de la volemia y del estado hidroelectrolítico, tales como la renina (REN), angiotensina (ANG) y aldosterona (ALD). La testosterona (T) es una hormona anabólica, mientras que el cortisol (C) es una hormona de estrés, con funciones catabólicas. El cociente T/C es un reflejo de la intensidad anabólica/catabólica de un ejercicio y en atletas humanos, se ve afectada por el estado hídrico. Objetivos. 1) Describir las variaciones en las concentraciones de REN, ANG, ALD, T, C y ratio T/C en caballos durante un ejercicio de tiro y arrastre, en relación con otros marcadores de equilibrio hidroelectrolítico y en función de la carga arrastrada; 2) Analizar si la respuesta de estas hormonas al ejercicio difiere entre animales con deshidratación hipertónica y euhidratados; Hipótesis: 1) Que las concentraciones de REN, ANG, ALD, T, C serán más elevadas en los caballos deshidratados que en los euhidratados; 2) Que el ejercicio de tiro y arrastre, particularmente en los animales de mayor peso corporal, inducirá una mayor activación del eje REN, ANG, ALD y una liberación superior de T; 3) Que los animales deshidratados experimentarán un incremento más intenso de estas hormonas en respuesta al ejercicio. Material y métodos. Se han llevado a cabo dos estudios simultáneos. En el estudio I, se han analizado los siguientes parámetros: valor hematócrito (HTO), albúmina (ALB), sodio (Na), potasio (K), cloro (Cl), lactato (LA) y concentraciones séricas de REN, ANG y ALD y en el estudio II, se han determinado las concentraciones de ALB, T, C y ratio T/C. En el estudio I, se han incluido 64 caballos machos, enteros y castrados, divididos en dos grupos según su estado hídrico: grupo control o euhidratado (CTR, n=11) y grupo deshidratado (DH; n=53), con deshidratación hipertónica inducida por restricción de agua y comida. Además, según su peso corporal, los animales se han dividido en 3 categorías de peso: I (<350 kg; n=3 para grupo CTR; n=23 para DH), II (351-450 kg; n=3 para CTR; n=18 para DH) y III (>451 kg; n=5 para CTR; n=12 para DH). En el estudio II, se han incluido los mismos animales, con excepción de la categoría de peso III para el grupo CTR, que solo está constituida por 3 animales, en lugar de 5, al descartar a los machos castrados, debido a la medición de T. Todos los animales, realizaron un ejercicio consistente en recorrer una pista de arena de playa de 60 m de longitud, tirando de un carruaje, con 2, 2,25 y 2,5 veces su peso corporal para las tres categorías de peso. La pista de arena se dividió en cuatro áreas de 15 m, en cada una de las cuales, el animal hizo una parada obligatoria, de duración decidida por el acompañante, y que se incluyó como tiempo de carrera. Los animales eran eliminados si se superan los 5 min de duración. En los dos estudios, se tomaron muestras de sangre en los siguientes tiempos: en reposo, antes del ejercicio (R), dentro del primer minuto tras finalizar el ejercicio (E) y a los 5, 10, 15 y 30 minutos de una recuperación pasiva (5REC, 10REC, 15REC y 30REC). Resultados. Estudio I. La diferencia de peso de los caballos tuvo una influencia mínima en los valores basales y en la respuesta al ejercicio. En reposo, los caballos DH tuvieron valores superiores de HTO, ALB, LA, Na, K y ANG en comparación con los CTR. El ejercicio condicionó una elevación de HTO, ALB, LA y Na, tanto en los caballos CTR como en los DH. Se encontró un incremento de ANG en los caballos DH y de ALD en los caballos CTR. La elevación con el ejercicio experimentada por los parámetros analizados fue de magnitud similar en los grupos CTR y DH, con excepción del LA (incrementó más en DH) y ALD (aumentó más en CTR). Estudio II. El ejercicio dio lugar a un aumento de T en las categorías I y III de los grupos CTR y DH, así como un descenso en la categoría II del grupo CTR. El C mostró un aumento progresivo en las tres categorías y en los dos grupos de estado hídrico, con los valores máximos en el tiempo 30REC. El ratio T/C aumentó en la categoría III del grupo DH, descendió en la categoría II del grupo CTR y no varió en los otros casos. Los animales DH, independientemente de la categoría de peso, tuvieron valores superiores de T y C, en la mayoría de los tiempos de extracción de muestras. Sin embargo, si se consideran los cambios experimentados por estas hormonas durante el ejercicio o en la recuperación, en relación a los valores basales, el aumento del C fue más marcado en el grupo CTR que en el DH, para las tres categorías de peso. Las variaciones de la concentración de T fueron superiores en las categorías de peso I y III del grupo CTR que en el grupo DH. El ratio T/C fue estadísticamente igual entre caballos CTR y DH en las categorías I y III, mientras que en la categoría II, los caballos DH presentaron cocientes T/C mayores. Conclusiones. La deshidratación hipertónica altera la concentración de las hormonas implicadas en la regulación del equilibrio hidro-electrolítico, de la presión sanguínea y del metabolismo. Sin embargo, el estado hídrico previo al ejercicio tiene una acción mínima sobre la magnitud de estos cambios en respuesta a un ejercicio de tiro y arrastre de corta duración (inferior a 5 min). Relevancia. Se ha demostrado que la respuesta neurohumoral, determinada en base a las concentraciones circulantes de las hormonas REN, ANG, ALD, T y C, se ve afectada por el ejercicio cuando el animal empieza el mismo en estado de euhidratación o de deshidratación.

Estudo do comportamento plástico, mecânico, microestrutural e térmico do concreto produzido com resíduo de porcelanato

Population growth experienced in major cities, allied to society s need of infra-structure, especially ones related to habitational demands, increases the consumption of construction materials. As a consequence, consumption of natural resources itself. Thus, due to this process, concrete is one of the most produced materials in civil construction. This is also due to the great diversity of its application, easiness in its execution and adequate mechanical performance, as well as low production costs. Following the same tendencies in construction development, the ceramic industry has intensified the production of porcelain ceramic tiles and floors. These are achieved by a fine finishing and receive polishing at the end of the fabrication process. This work researched the use of porcelain residues in polishing for the production of concrete. All of which; due to economical and environmental issues. This process aims to prove adequate destiny for this type of residue, due to environmental issues, incorporating it to the concrete itself; all of which provides economy in consumption of the materials that constitute concrete. Thus, the main characteristics of concrete were investigated through the inclusion of different concentration of the porcelain residue as additional trait element. The residue rates incorporated to the trait varied from 10% to 50% in relation to the cement mass, in the traits with plastic additives and without plastic additives. It is observed that the inclusion of porcelain residue produced a meaningful alteration in the consistency of fresh concrete. This residue has a fine granulometry and it considerably absorbed the water used in the concrete spreading, influencing the way this material is dealt with. Thus, the value of cement striking decreases with the increase of residues present in trait. The maximal incorporation of the residue was of 50%, massively, for the same factor water/initial cement. The use of residues in concrete results in an 40% increase in the compression resistance. It is also proportional to residue concentration of porcelain in the trait. The microstructure was also favored once porosity and concrete absorption decreases with the use of this residue. The parameters demonstrate the quality and durability of the concrete produced with this residue. The use of porcelain residue in concrete composition has not produced meaningful thermal behavior changes. Thermal conductivity, heat capacity and thermal diffusivity have been maintained basically constant

Aproveitamento de resíduos minerais na formulação de argamassas para a construção civil

Current environmental concerns include the excessive consumption and inefficient use of non-renewable natural resources. The construction industry is considered one of the largest consumers of natural raw materials, significantly contributing to the environmental degradation of the planet. The use of calcareous quarry (RPPC) and porcelain tile polishing residues (RPP) as partial replacements of the cement in mortars is an interesting alternative to minimize the exploration of considerably large amounts of natural resources. The present study aimed at investigating the properties of fresh and hardened mortars produced using residues to replace cement. The residues used were fully characterized to determine their specific mass, unitary mass, particle size distribution and morphology, and composition. The performance of the mortars was compared to that of reference compositions, prepared without residues. A total of 18 compositions were prepared, 16 using residues and 2 reference ones. The mortars were prepared using Portland CP II F 32 cement, CH I hydrated lime, river sand and tap water. The compositions of the mortars were 1:1:6 and 1:0.5:4.5 (vol%), and water to cement ratios of 1.87 and 1.45 were used, respectively. The mortars in the fresh state were evaluated by consistency index, water retention, density of mass and incorporated air content tests. In their hardened state, the mortars were evaluated by apparent mass density, modulus of elasticity, flexural tensile strength, compressive strength and water absorption by capillarity. The mortars were also analyzed by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and fluorescence. Finally, they were classified according to NBR 13281 standards. The mortars prepared using residues partially replacing the cement exhibited lower modulus of elasticity compared to the reference compositions, thus improving the performance in their intended use. On the downside, the water absorption by capillarity was affected by the presence of residues and both the tensile and compressive strength were reduced. However, from the overall standpoint, the replacement of cement by calcareous quarry or porcelain tile polishing residues did not result in significant changes in the properties of the mortars. Therefore, compositions containing these residues can be used in the construction industry

Efeito da moagem de alta energia na microestrutura e nas propriedades magnéticas do compósito wc-10%p.Co

This work a studied the high energy milling effect in microstructure and magnetic properties of the WC-10wt.%Co composite. The composite powders were prepared by mechanical mixed and milled at 2 hours, 100 hours, 200 hours and 300 hours in planetary milling. After this process the composite were compacted in stainless steel die with cylindrical county of 10 mm of diameter, at pressure 200 Mpa and sintered in a resistive furnace in argon atmosphere at 1400 oC for 5 min. The sintered composite were cutted, inlaid, sandpapered, and polished. The microestrutural parameters of the composite was analyzed by X-ray diffraction, scanning electronic microscopy, optical microscopy, hardness, magnetic propriety and Rietveld method analyze. The results shows, with milling time increase the particle size decrease, it possibility minor temperature of sintering. The increase of milling time caused allotropic transformation in cobalt phase and cold welding between particles. The cold welding caused the formation of the particle composite. The X-ray diffraction pattern of composite powders shows the WC peaks intensity decrease with the milling time increase. The X-ray diffraction pattern of the composite sintered samples shows the other phases. The magnetic measurements detected a significant increase in the coercitive field and a decrease in the saturation magnetization with milling time increase. The increase coercitive field it was also verified with decrease grain size with milling time increase. For the composite powders the increase coercitive field it was verified with particle size reduction and saturation magnetization variation is relate with the variation of free cobalt. The Rietveld method analyze shows at milling time increase the mean crystalline size of WC, and Co-cfc phases in composite sintered sample are higher than in composite powders. The mean crystallite size of Co-hc phase in composite powders is higher than in composite sintered sample. The mean lattice strains of WC, Co-hc and Co-cfc phases in composite powders are higher than in composite sintered samples. The cells parameters of the composite powder decrease at milling time increase this effect came from the particle size reduction at milling time increase. In sintered composite the cells parameters is constant with milling time increase

Manual de usuario para el sistema básico de tratamiento de aguas residuales de tinturado de lana.

22 hojas : ilustraciones, fotografías.

Prevalencia y factores asociados a la hiponatremia en adultos mayores hospitalizados en el Hospital Vicente Corral Moscoso, Cuenca-2014

Introducción: La hiponatremia es un trastorno electrolítico frecuente entre pacientes adultos mayores hospitalizados, además es un factor pronóstico para su hospitalización. Varios estudios afirman que aumenta la morbimortalidad. Objetivo: Determinar la prevalencia de la hiponatremia y los factores asociados a la hiponatremia en los adultos mayores hospitalizados en el Hospital Vicente Corral Moscoso de Cuenca, en el año 2014. Metodología: Se realizó un estudio analítico transversal que permitió identificar la prevalencia y los factores asociados a la hiponatremia. Para ello se revisaron las historias clínicas de los pacientes de las áreas de clínica, cirugía y emergencia. Partiendo de un universo de 2089 historias clínicas, calculando la muestra con una prevalencia no conocida, un intervalo de confianza del 95% y una precisión del 5 %, obteniendo un total de 325 pacientes. Resultados: Se trabajó con 325 adultos mayores, siendo el grupo de edad del Adulto Mayor Joven el más frecuente (43,7%) de los cuales el 52,6 % pertenece al sexo femenino, además la mayoría de pacientes se encontraban en Clínica (77%). La prevalencia de la hiponatremia fue del 31%. La insuficiencia cardiaca, es el factor que se asoció con una probabilidad de 2,4 de padecer hiponatremia. Los fármacos antiarritmicos, se relacionan estadísticamente pues aumentan la probabilidad en 4,8 veces de padecer hiponatremia, seguidos por los antidepresivos que aumentan 3,2 veces. Conclusiones: la hiponatremia en los adultos mayores hospitalizados fue 31%, además la insuficiencia cardiaca y la dosificación de fármacos antiarrítmicos y antidepresivos se asocian a un mayor riesgo de padecerla

A EFICIÊNCIA DO SISTEMA DE FLOTAÇÃO NO TRATAMENTO DE ESGOTO

O presente trabalho teve o objetivo de analisar a repercussão sobre o tratamento de esgoto e o uso do método anaeróbico. Neste, mostraremos a relação entre a eficiência da remoção do fósforo e a implantação do sistema de flotação pós-reator anaeróbio. A Estação de Tratamento de Esgoto Ipanema está instalada as margens do Córrego Terra Branca, afluente do Rio Araguari, no município de Uberlândia, Minas Gerais, tendo o Departamento de Água e Esgoto de Uberlândia como responsável pela operação desta unidade. Esta estação de tratamento de esgoto atende uma população aproximadamente de 7000 habitantes residentes nos bairros Aclimação e Ipanema e, inicialmente era composta por grades grossas, uma caixa de areia, um reator anaeróbio de fluxo ascendente (RAFA), um filtro biológico e um tanque de decantação. Para a melhoria da eficiência da estação, foi implementado um tratamento complementar pós-reator de forma que este faça a adequação necessária para promoção da qualidade ambiental do efluente pós-tratamento no que se refere ao parâmetro fósforo para o lançamento no copo receptor, enquadrado na Classe 2, da Resolução do CONAMA 357/2005. O canal de tratamento por flotação em fluxo variável para receber o efluente pós-reator substituiu o polimento realizado atualmente através de filtro biológico e o tanque de decantação.