Caracterização de um compósito utilizando cimento com agregado de resíduo plástico e resíduo de gesso

The demand for environmental comfort in construction systems within the insulation and thermal comfort, plus the advent of new laws regulating the minimum requirements of comfort, disposal of solid industrial waste, construction waste, the requirements of consumers by adopting construction methods "cleaner", encouraged the development of this work. Aims technologically characterize the composite proposed in three types of samples (10%, 30% and 50% of thermoset plastic industrial waste) and raw materials: gypsum waste, cement and plastic thermosetting industrial waste in order to produce the composite with properties of thermal insulation: conductivity, thermal diffusivity, specific heat and resistivity. The physical, structural and morphological properties of the raw materials were investigated by thermogravimetry analysis (TG / DSC), X-ray diffraction (DRX), X-ray fluorescence (FXR) and scanning electron microscopy (MEV). Obtaining mechanical properties through the compression strength test. The analysis results indicate characteristics suitable for cement matrix composite production with the addition of thermosetting plastic industrial waste and gypsum waste, with potential application of these materials in composites with properties of thermal insulation. Finally, assessing what proportion showed up with better performance. Considering the analysis and testing carried out.

Caracterização de um compósito utilizando cimento com agregado de resíduo plástico e resíduo de gesso

The demand for environmental comfort in construction systems within the insulation and thermal comfort, plus the advent of new laws regulating the minimum requirements of comfort, disposal of solid industrial waste, construction waste, the requirements of consumers by adopting construction methods "cleaner", encouraged the development of this work. Aims technologically characterize the composite proposed in three types of samples (10%, 30% and 50% of thermoset plastic industrial waste) and raw materials: gypsum waste, cement and plastic thermosetting industrial waste in order to produce the composite with properties of thermal insulation: conductivity, thermal diffusivity, specific heat and resistivity. The physical, structural and morphological properties of the raw materials were investigated by thermogravimetry analysis (TG / DSC), X-ray diffraction (DRX), X-ray fluorescence (FXR) and scanning electron microscopy (MEV). Obtaining mechanical properties through the compression strength test. The analysis results indicate characteristics suitable for cement matrix composite production with the addition of thermosetting plastic industrial waste and gypsum waste, with potential application of these materials in composites with properties of thermal insulation. Finally, assessing what proportion showed up with better performance. Considering the analysis and testing carried out.

Rugosidade superficial e adesão bacteriana em compósitos com nanopartículas após acabamento e polimento

Objective: To evaluate in vitro the surface roughness and bacterial adhesion of nanoparticle composites, after being subjected to different finishing and polishing systems. Materials and Methods: 66 specimens were prepared, and 30 with Filtek Z350 XT (3M ESPE, USA) and 30 with the resin IPS Empress Direct (Ivoclar Vivadent, USA), divided into 6 groups (n = 10 ). Six specimens were prepared for analysis in scanning electron microscopy (SEM) .Each kind of resin was subjected to finishing and polishing systems: Sof-Lex Pop-On discs (3M ESPE, USA) and AstropolTM system (Ivoclar Vivadent , USA), featuring the experimental group. The control group did not undergo any kind of finishing and polishing technique. The average roughness (Ra) in both groups was measured using a roughness in the setting of 0.25 mm (cut off) and surface images obtained with photomicrographs taken with a scanning electron microscope (SEM) magnified 500 times. Bacterial adherence was evaluated by determining the absorbance (OD) of the suspension of adhered cells by spectrophotometer at 570 nm. The results were submitted for analyzed with 2-way ANOVA at α=.05 and Tukey multiple comparison tests. Results: Statistically significant differences were found between the groups in terms of roughness and bacterial adhesion. Filtek Z350 XT for resin were no differences between the tested finishing and polishing systems, where the system of lowest surface roughness was the Sof-Lex Pop-On. To the resin IPS Empress Direct, the finishing and polishing system Astropol, had lower results of surface roughness. As for bacterial adhesion, the lowest optical density value for Filtek Z350 XT was for the group that used the finishing and polishing system Sof-Lex Pop-On and the resin IPS Empress Direct the group that used the Astropol system. In addition, there was a positive correlation between surface roughness and bacterial adhesion on polished surfaces (r = 0.612) Conclusions: surface roughness and bacterial adhesion are closely related. The finishing and polishing Sof-Lex Pop-On system is more suitable for nanoparticulate Filtek Z350 XT and the finishing and polishing system Astropol for resin nanohíbrida IPS Empress Direct.

DISPERSÕES AQUOSAS DE POLIURETANO COMO MATERIAL BASE PARA O DESENVOLVIMENTO DE SISTEMAS DE LIBERTAÇÃO CONTROLADA DE CETOPROFENO

O cetoprofeno (ácido 2-(3-benzoilfenil) propiónico) é um anti-inflamatório não esteroidal (AINE) utilizado no tratamento de uma grande variedade de doenças inflamatórias agudas e crónicas incluindo a artrite reumatoide, osteoartrite e espondilite anquilosante. A sua administração oral prolongada está associada a diversas reações gastrointestinais, tais como irritações e ulcerações. Neste contexto, é importante desenvolver sistemas alternati-vos, nomeadamente sistemas de libertação controlada para administração oral, transdér-mica ou intradérmica. Este trabalho tem como objetivo testar a possibilidade de utilização de dispersões aquosas de poliuretano (PUDs) como material de suporte para a produção de sistemas de liberta-ção controlada de cetoprofeno. Numa primeira etapa, foram sintetizadas PUDs de base poliéster (policaprolactona, PCL) e poliéter (polipropileno-glicol, PPG) utilizando o méto-do de pré-polímero modificado. As dispersões obtidas foram caracterizadas em termos de pH, viscosidade, teor de sólidos e tamanho de partícula. Numa segunda etapa, foi testada a incorporação do cetoprofeno nas PDUs produzidas utilizando duas estratégias para incre-mentar a sua solubilidade em água: (i) utilização de um co-solvente (acetona, DMSO e HYD) e (ii) utilização de um surfactante não iónico (Tween 80). A incorporação foi testada para teores de 5% e 10% (razão fármaco/polímero, m/m). Os filmes produzidos pelo méto-do da evaporação do solvente foram avaliados quanto à sua homogeneidade e caracteriza-dos por FTIR e DSC. Numa terceira fase realizaram-se estudos de libertação em tampão de fosfato salino (PBS) de pH 7.5 tendo como objetivo avaliar a viabilidade de desenvolvimen-to de diferentes tipologias de dispositivos dependendo de um compromisso entre as pro-priedades dos filmes e o comportamento de libertação. Os resultados obtidos podem ajudar na seleção do material de base mais adequado para um determinado fim. Adicionalmente, e mais importante, comprovou-se a viabilidade de utilizar PUDs como material base para o desenvolvimento de sistemas de libertação con-trolada, utilizando como exemplo o cetoprofeno. A avaliação da toxicidade e da atividade anti-inflamatória dos filmes produzidos foi considerada estando em curso neste momento no grupo do Professor Armando Cunha Júnior.

Inibição de linhagens do complexo Fusarium Graminearum por compostos naturais e sintéticos

Quando produtos alimentícios e especiarias são contaminados por micotoxinas é quase impossível detoxificar utilizando processos usuais da indústria de alimentos ou durante o preparo doméstico. Por isso, controlar o crescimento do fungo e a produção de toxinas é uma demanda para garantir a segurança alimentar. Os agrotóxicos são rotineiramente utilizados como estratégia para proteger as plantas de doenças provocadas pela contaminação fúngica. No entanto, eles estão associados a efeitos adversos ao sistema nervoso central e periférico, têm ação imunodepressora e são cancerígenos. Em virtude disso, o objetivo deste trabalho foi estudar a inibição do desenvolvimento, do potencial toxigênico e da expressão gênica de linhagens do Complexo Fusarium graminearum por compostos naturais comparativamente aos fungicidas azoxistrobina e trifloxistrobina. Do farelo de arroz, foram extraídos o γ-orizanol e os ácidos fenólicos (EFF). Das sementes de nim foram extraídos os ácidos fenólicos (EFN), totalizando três extratos naturais. A capacidade antioxidante dos extratos foi verificada pelo consumo do radical livre DPPH• , capacidade de captura do radical ABTS●+, redução do ferro e inibição da oxidação enzimática. Os mecanismos de inibição de três linhagens de F. graminearum foram avaliados através da determinação de compostos estruturais (glicosamina e ergosterol) e da atividade de enzimas do metabolismo primário (α- amilase e proteases). Foram determinadas as micotoxinas de Fusarium: deoxinivalenol (DON), 15 acetildeoxinivalenol (15AcDON), 3 acetildeoxinivalenol (3AcDON), nivalenol (NIV) e zearalenona (ZEA). A expressão dos genes Tri1 e Tri5 foi determinada a fim de verificar se ocorria modificação da expressão gênica nas linhagens do Complexo F. graminearum ocasionada pela presença dos antifúngicos. O EFF apresenta atividade antioxidante destacada em relação aos demais extratos naturais para inibir a iniciação do processo, a propagação do radical livre e a catálise enzimática. A presença dos compostos naturais mostrou efeito promissor como antifúngico para as linhagens, sendo que a concentração necessária para inibir 50% do crescimento radial das colônias (MIC50) foi 0,9 g/kg para γ-orizanol; 0,032 g/kg para EFF e 0,037 g/kg para EFN, portanto, os extratos fenólicos são mais eficazes para inibição de F. graminearum do que o γ-orizanol. Os extratos naturais afetaram as atividades das enzimas α-amilase e proteases. Também ocorreu a redução da formação de componentes estruturais (glicosamina e ergosterol). Os extratos naturais se destacaram pela capacidade de inibição de micotoxinas produzidas pela biomassa fúngica, com destaque para o EFN sobre a produção de DON, 15AcDON, 3AcDON e ZEA. Sendo assim, é possível dizer que há uma relação direta entre a atividade antioxidante na inibição do fungo e na manifestação do seu potencial toxigênico. Além disso, esse estudo contribuiu com a elucidação do mecanismo de ação dos antifúngicos naturais estudados. Ocorre modificação na expressão gênica quando a linhagem é submetida ao tratamento com antifúngico, havendo uma relação direta entre a expressão do gene Tri5 e a produção de DON.

Desenvolvimento de tubulação em compósito polimérico revestida externamente com poliuretano de alta densidade

Pipelines for the transport of crude oil from the production wells to the collecting stations are named production lines . These pipes are subjected to chemical and electrochemical corrosion according to the environment and the type of petroleum transported. Some of these lines, depending upon the composition of the fluid produced, may leak within less than one year of operation due to internal corrosion. This work aims at the development of composite pipes with an external protecting layer of high density polyurethane for use in production lines of onshore oil wells, meeting operational requirements. The pipes were manufactured using glass fibers, epoxy resin, polyester resin, quartz sand and high density polyurethane. The pipes were produced by filament winding with the deposition of high density polyurethane on the external surface and threaded ends (API 15 HR/PM-VII). Three types of pipes were manufactured: glass/epoxy, glass/epoxy with an external polyurethane layer and glass/epoxy with an intermediate layer of glass fiber, polyester, sand and with an external polyurethane layer. The three samples were characterized by Scanning Electronic Microscopy (SEM) and for the determination of constituent content. In addition, the following tests were conducted: hydrostatic test, instant rupture, shorttime failure pressure, Gardner impact, transverse stiffness and axial tension. Field tests were conducted in Mossoró RN (BRAZIL), where 1,677 meters of piping were used. The tests results of the three types of pipes were compared in two events: after two months from manufacturing of the samples and after nine months of field application. The results indicate that the glass/epoxy pipes with an intermediate layer of fiber glass composite, polyester e sand and with an external layer of high density polyurethane showed superior properties as compared to the other two and met the requirements of pressure class, axial tensile strength, transverse stiffness, impact and environmental conditions, for onshore applications as production lines

Utilização de resíduo lignocelulósico na obtenção de chapa de madeira aglomerada homogênea e compósito reforçado com fibra de vidro-E

This research is about the use of the coconut´s endocarp (nucifera linn) and the waste of derivatives of wood and furniture as raw material to technological use. In that sense, the lignocellulosic waste is used for manufacture of homogeneous wood sheet agglomerate (LHWS) and lignocellulosic load which take part of a polymeric composite with fiber glass E (GFRP-WC). In the manufacturing of the homogeneous wood sheet agglomerate (LHWS), it was used mamona´s resin as waste s agglutinating element. The plates were taken up in a hydraulic press engine, heated, with temperature control, where they were manufactured for different percentage of waste wood and coconuts nucífera linn. Physical tests were conducted to determine the absorption of water, density, damp grade (in two hours and twenty-four hours), swelling thickness (in two hours and twenty-four hours), and mechanical tests to evaluate the parallel tensile strength (internal stick) and bending and the static (steady) flexural. The physical test´s results indicate that the LHWS can be classified as bonded wood plate of high-density and with highly water resistant. In the mechanical tests it was possible to establish that LHWS presents different characteristics when submitted to uniaxial tensile and to the static (steady) flexural, since brittle and elasticity module had a variation according to the amount of dry endocarp used to manufacture each trace of LHWS. The GFRP-WC was industrially manufactured by a hand-lay-up process where the fiber glass E was used as reinforcement the lignocellulósic´s waste as load. The matrix was made with ortofitalic unsaturated polyester resin. Physical and mechanical tests were performed in presence of saturated humidity and dry. The results indicated good performance of the GFRP-WC, as traction as in flexion in three points. The presence of water influenced the modules obtained in the flexural and tensile but there were no significant alteration in the properties analyzed. As for the fracture, the analysis showed that the effects are more harmful in the presence of damp, under the action of loading tested, but despite this, the fracture was well defined starting in the external parts and spreading to the internal regions when one when it reaches the hybrid load

Síntese e caracterização de catalisadores nanométricos de LaSrNiO4 para aplicação em dessulfurização de tiofeno

The mixed metal oxides constitute an important class of catalytic materials widely investigated in different fields of applications. Studies of rare earth nickelates have been carried by several researchers in order to investigate the structural stability afforded by oxide formed and the existence of catalytic properties at room temperature. So, this study aims synthesize the nanosized catalyst of nickelate of lanthanum doped with strontium (La(1-x)SrxNiO4-d; x = 0,2 and 0,3), through the Pechini method and your characterization for subsequent application in the desulfurization of thiophene reaction. The precursor solutions were calcined at 300ºC/2h for pyrolysis of polyester and later calcinations occurred at temperatures of 500 - 1000°C. The resulting powders were characterized by thermogravimetric analysis (TG / DTG), surface area for adsorption of N2 by BET method, X-ray diffraction (XRD), scanning electron microscopy (HR_SEM) and spectrometry dispersive energy (EDS). The results of XRD had show that the perovskites obtained consist of two phases (LSN and NiO) and from 700ºC have crystalline structure. The results of SEM evidenced the obtainment of nanometric powders. The results of BET show that the powders have surface area within the range used in catalysis (5-50m2/g). The characterization of active sites was performed by reaction of desulfurization of thiophene at room temperature and 200ºC, the relation F/W equal to 0,7 mol h-1mcat -1. The products of the reaction were separated by gas chromatography and identified by the selective detection PFPD sulfur. All samples had presented conversion above 95%

Análisis de compensación de emisiones de CO2 por medio de un proyecto de reciclaje de Pet en ENKA de Colombia

Esta investigación evalúa el impacto ambiental del proceso de producción de fibra corta en Enka de Colombia teniendo en cuenta tres escenarios diferentes, utilizando la metodología establecida en el Greenhouse Gas Protocol Standard -- Generando una comparación entre dichos escenarios con el fin de evaluar si hay una compensación entre las emisiones que se generan por el uso de una carboeléctrica y las emisiones que se pueden ahorrar mediante el reciclaje de botellas PET -- A partir de lo anterior se realiza un inventario de análisis de ciclo de vida donde se evalúan las emisiones asociadas a la producción de materias primas, transporte, consumo de energía y residuos para cada escenario -- Con el desarrollo de este proyecto se logra concluir que sí hay una reducción de emisiones por el reciclaje de botellas PET, reduciendo las emisiones de CO2 en aproximadamente un 15.4%

Influência das espécies do plasma de N2 + O2 nas propriedades físicoquímicas das superfícies do pet

This work reports the influence of the poly (ethylene terephthalate) textile and films surface modification by plasmas of O2 and mixtures (N2 + O2), on their physical and chemical properties. The plasma surface polymeric modification has been used for many researchs, because it does not affect the environment with toxic agents, the alterations remains only at nanometric layers and this technique shows expressive results. Then, due to its good acceptance, the treatment was carried out in a vacuum chamber. Some parameters remained constant during all treatment, such as: Voltage 470 V; Pressure 1,250 Mbar; Current: 0, 10 A and gas flow: 10 cm3/min, using oxygen plasma alternating the treatment time 10 to 60 min with an increase of 10 min to each subsequent treatment. Also, the samples were treated with a gas mixture (nitrogen + oxygen) which was varied only the gas composition from 0 to 100% leaving the treatment time remaining constant to all treatment (10 min). The plasma treatment was characterized in-situ with Optics Emission Spectroscopy (OES), and the samples was characterized by contact angle, surface tension, Through Capillary tests, Raman spectroscopy, Infrared attenuated total reflection (IR-ATR) and atomic force microscopy, scanning electronic Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS). The results showed that oxygen treated fabrics presented high wettability, due to the hydrophilic groups incorporation onto the surface formed through spputering of carbon atoms. For the nitrogen atmosphere, there is the a film deposition of amine groups. Treatment with small oxygen concentration in the mixture with nitrogen has a higher spputered species of the samples

Compósitos poliméricos a base de fibras de licuri: efeitos da hibridização e do envelhecimento ambiental acelerado

The gradual replacement of conventional materials by the ones called composite materials is becoming a concern about the response of these composites against adverse environmental conditions, such as ultraviolet radiation, high temperature and moist. Also the search for new composite using natural fibers or a blend of it with synthetic fibers as reinforcement has been studied. In this sense, this research begins with a thorough study of microstructural characterization of licuri fiber, as a proposal of alternative reinforcement to polymeric composites. Thus, a study about the development of two composite laminates was done. The first one, involving only the fiber of licuri and the second comprising a hybrid composite based of fiber glass E and the fiber of licuri, in order to know the performance of the fiber when of fiber across the hybridization process. The laminates were made in the form of plates using the tereftálica ortho-polyester resin as matrix. The composite laminate made only by licuri fiber had two reinforcing fabric layers of unidirectional licuri and the hybrid composite had two reinforcing layers of unidirectional licuri fabric and three layers of fiber short glass-E mat. Finally, both laminates was exposed to aging acceleration in order to study the influence of environmental degradation involving the mechanical properties and fracture characteristics thereof. Regarding the mechanical properties of composites, these were determined through uniaxial tensile tests, uniaxial compression and three bending points for both laminates in original state, and uniaxial tensile tests and three bending points after accelerated aging. As regards the study of structural degradation due to aging of the laminates, it was carried out based on microscopic analysis and microstructure, as well as measuring weight loss. The characteristics of the fracture was performed by macroscopic and microscopic (optical and SEM) analysis. In general, the laminated composites based on fiber licuri showed some advantages in their responses to environmental aging. These advantages are observed in the behavior related to stiffness as well as the microstructural degradation and photo-oxidation processes. However, the structural integrity of this laminate was more affected in case the action of uniaxial tensile loads, where it was noted a lower rate of withholding his last resistance property

Design and synthesis of novel quinolones directed to the Plasmodium falciparum bc1 protein complex

Tese de Doutoramento, Química, Especialização em Química Orgânica, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2016

Desenvolvimento e caracterização de compósito a partir da borra da piaçava para construção da parábola de um fogão solar a concentração

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Avaliação da abertura de filtração de geotêxteis sob confinamento e parcialmente colmatados

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Civil e Ambiental, 2016.

Efeito antibacteriano de tecidos têxteis revestidos por prata através da técnica de deposição por plasma

In this study, it has been investigated the influence of silver film deposition onto 100% polyester woven and non-woven, on the survival of Escherichia coli and Staphylococcus aureus in contact with these surfaces. The treatment was performedin a chamber containing the working gas at low pressure (~ 10-2 mbar). Some process parameters such as as voltage: 470 V; pressure: 10-2 mbar; current : 0.40 A and gas flow: 6 and 10 cm3/min were kept constant. For the treatments with purêargon plasma using a flow of 6 and 10 cm3/min, different treatment times were evaluated, such as, 10 , 20, 30, 40, 50 and 60 minutes. Contact angle (sessile drop), measurements were used to determine the surface tension of the treated fabrics and its influence on the bacteria grow as weel as the possibilities of a biofilm formation. The formation of a silver film, as well as the amount of this element was verified byEDX technique. The topography was observed through scanning electron microscopy (SEM) to determine the size of silver grains formed on the surfaces of the fabric and assess homogeneity of treatment. The X-ray diffraction (XRD) was used to analyze the structure of silver film deposition. The woven fabric treatments enabled the formation of silver particulate films with particle size larger than the non-woven fabrics. With respect to bacterial growth, all fabrics were shown to be bactericidal for Staphylococcus aureus (S. aureus), while for the Escherichia coli (E. coli), the best results were found for the non-woven fabric (TNT) treated with a flow of 10 cm3/min to both bacteria