Cyclosporine A delivery to the eye: a pharmaceutical challenge.

Systemic administration of cyclosporine A (CsA) is commonly used in the treatment of local ophthalmic conditions involving cytokines, such as corneal graft rejection, autoimmune uveitis and dry eye syndrome. Local administration is expected to avoid the various side effects associated with systemic delivery. However, the currently available systems using oils to deliver CsA topically are poorly tolerated and provide a low bioavailability. These difficulties may be overcome through formulations aimed at improving CsA water solubility (e.g. cyclodextrins), or those designed to facilitate tissue drug penetration using penetration enhancers. The use of colloidal carriers (micelles, emulsions, liposomes and nanoparticles) as well as the approach using hydrosoluble prodrugs of CsA have shown promising results. Solid devices such as shields and particles of collagen have been investigated to enhance retention time on the eye surface. Some of these topical formulations have shown efficacy in the treatment of extraocular diseases but were inefficient at reaching intraocular targets. Microspheres, implants and liposomes have been developed to be directly administered subconjunctivally or intravitreally in order to enhance CsA concentration in the vitreous. Although progress has been made, there is still room for improvement in CsA ocular application, as none of these formulations is ideal.

From geriatric service to primary care: a retrospective pharmaceutical analysis of the medical prescription

Introduction The population of elderly persons is increasing andnegative outcomes due to polymedication are frequent. Discrepanciesin information about medication are frequent when older persons aretransitioning from hospital to home, increasing the risk of hospitalreadmission. The aims of this study were a) to determine discrepanciesin medical regimen indicated in two official discharge documents(DS = discharge summary, DP=discharge prescription); b) to characterizethe pharmacotherapy prescribed in older patients dischargedfrom a geriatric service.Materials & Methods Elderly patients (N=230) discharged from thegeriatric service (CHUV, Lausanne) over a 6-month period (January toJune 2009) were selected. Community pharmacists compared DS andDP to identify discrepancies including (a) drugs' name; (b) schedule ofadministration, dosage, frequency, prn prescription, treatment durationand galenic formulation. Beers' criteria were applied to identifypotentially inappropriate drugs and a descriptive analysis of drug costs,prescription profiles and generics were also performed.Results On average, patients were 82 ± 7 years old and stayed23.0 ± 11.6 days in the geriatric service. The delay between the datesof patient's discharge with the DP and the sending of the DS to hisgeneral physician averaged 14.0 ± 7.5 days (range 1-55). The DPhad an average of 10.0 ± 3.3 drugs (range 2-19). 77% of patients hadat least one discrepancy. A drug was missing on the DS in 57.8% ofpatients and 19.6% had a missing prn prescription. Among the 2312drugs prescribed, 3% belonged to Beers' list. They were prescribed to61 patients (26.5%), with 6 patients cumulating two Beers' potentiallyinappropriate drugs in their treatment. Analgesics (85% of thepatients), anticoagulants (80%), mineral supplements (77%), laxatives(52%) and antihypertensives (46%) were the drug classes most frequentlyprescribed. Mean costs of treatment as per DP was160.4 ± 179.4 Euros. Generic prescription represented more than 5%of the costs for 3 therapeutic classes (cholesterol-lowering agents(64%), antihypertensives (50%) and antidepressants (47%)).Discussion & Conclusion The high discrepancy rate between medicationlisted in the DP and the DS highlights a need for safetyimprovement. Potential benefits are expected from reinforced pharmacist-physician collaboration in transition from hospital to primarycare. In addition, even though Beers' criteria are questionable, thedrugs prescribed in this already fragile population, and the potentialopportunities of economical optimizations, are advocating thedevelopment and the scientific evaluation of a structured advancedcollaborative pharmacy practice service. This foresees improvedeffectiveness, safety and efficiency in the medication management ofelderly persons.

Development, physical-chemical stability and release studies of four alcohol-free spironolactone suspensions for use in pediatrics

Dissolution studies have become of great significance because, in most cases, drug dissolution is the rate-limiting step in the absorption process. As occurs with solid oral dosage forms, heterogeneous disperse systems (suspensions) could also have some problems with their in vitro dissolution. The objective of this study was to evaluate influence of the excipients on the release of spironolactone from four alcohol free suspensions (pharmaceutical compounding) of spironolactone 5 mg/mL suitable for pediatric use. Also the comparison of the physical and chemical stability of the suspensions stored at 4, 25 and 40 ºC over a 60- day period has been studied. Rheological behavior, particle size, a prediction of long-term physical stability, pH and assay of spironolactone by HPLC were assessed at prefixed times. The dissolution profile of each suspension was determined and compared with that of the commercial tablets. A microbiological study of the best formula was also performed. Chemically, the four spironolactone suspensions were stable for 60 days stored at three temperatures; Suspension IV had optimum pH values and the highest recovery percentage. In terms of physical stability, sedimentation occurred in Suspension IV and flotation of spironolactone in Suspensions I, II and III. Suspension III had the highest viscosity and the slowest drug release. Suspension IV was also microbiologically stable for 60 days. In conclusion, Suspension IV had the best properties and the least suitable form was Suspension III, as its high viscosity made it difficult to achieve homogeneous redispersion, and it had the slowest dissolution profile.

Development and application of spectrophotometric method for the determination of cefaclor in pharmaceutical formulations

A simple, fast and sensitive spectrophotometric method for the determination of cefaclor in pharmaceutical raw and dosage forms based on reaction with ninhydrin is developed, optimized and validated. The purple color (Ruhemenn's purple) that resulted from the reaction was stabilized and measured at 560 nm. Beer's law is obeyed in the concentration range of 4-80 µg mL-1 with molar absorptivity of 1.42 × 10(5) L mole-1 cm-1. All variables including the reagent concentration, heating time, reaction temperature, color stability period, and cefaclor/ninhydrin ratio were studied in order to optimize the reaction conditions. No interference was observed from common pharmaceutical adjuvant. The developed method is easy to use, accurate and highly cost-effective for routine studies relative to HPLC and other techniques.

Spectrophotometric and spectrofluorimetric determination of some drugs containing secondary amino group in bulk drug and dosage forms via derivatization with 7-Chloro-4-Nitrobenzofurazon

Sensitive and selective spectrophotometric and spectrofluorimetric methods have been developed for determination of some drugs such as Pramipexole, Nebivolol, Carvedilol, and Eletriptan, which commonly contain secondary amino group. The subject methods were developed via derivatization of the secondary amino groups with 7-Chloro-4-Nitrobenzofurazon in borate buffer where a yellow colored reaction product was obtained and measured spectrophotometrically or spectrofluorimetrically. Concentration ranges were found as 2.0 to 250 μg mL-1 and 0.1 to 3.0 μg mL-1, for spectrophotometric and spectrofluorimetric study, respectively. The described methods can be easily applied by the quality control laboratories in routine analyses of these drugs in pharmaceutical preparations.

Spectrophotometric determination of diclofenac in pharmaceutical preparations assisted by microwave oven

In this work, an effective and low-cost method for the determination of sodium or potassium diclofenac is proposed in its pure form and in their pharmaceutical preparations. The method is based on the reaction between diclofenac and tetrachloro-p-benzoquinone (p-chloranil), in methanol medium. This reaction was accelerated by irradiating of reactional mixture with microwave energy (1100 W) during 27 seconds, producing a charge transfer complex with a maximum absorption at 535 nm. The optimal reaction conditions values such as reagent concentration, heating time and stability of the reaction product were determined. Beer's law is obeyed in a concentration range from of 1.25x10-4 to 2.00x10-3 mol l-1 with a correlation coefficient of 0.9993 and molar absorptivity of 0.49 x10³ l mol-1 cm-1. The limit of detection (LOD) was 1.35x10-5 mol l-1 and the limit of quantification (LOQ) was 4.49x10-5 mol l-1. In the presence of the common excipients, such as glucose, lactose, talc, starch, magnesium stearate, sodium sulphite, titanium dioxide, polyethyleneglycol, polyvinylpirrolidone, mannitol and benzilic alcohol no interferences were observed. The analytical results obtained by applying the proposed method compare very favorably with those given by the United States Pharmacopeia standard procedure. Recoveries of diclofenac from various pharmaceutical preparations were within 95.9% to 103.3%, with standard deviations ranging from 0.2% to 1.8%.

Argentimetric assay of ranitidine in bulk drug and in dosage forms

Two simple, rapid and cost-effective methods based on titrimetric and spectrophotometric techniques are described for the assay of RNH in bulk drug and in dosage forms using silver nitrate, mercury(II)thiocyanate and iron(III)nitrate as reagents. In titrimetry, an aqueous solution of RNH is treated with measured excess of silver nitrate in HNO3 medium, followed by determination of unreacted silver nitrate by Volhard method using iron(III) alum indicator. Spectrophotometric method involve the addition a known excess of mercury(II)thiocyanate and iron(III)nitrate to RNH, followed by the measurement of the absorbance of iron(III)thiocyante complex at 470 nm. Titrimetric method is applicable over 4-30 mg range and the reaction stoichiometry is found to be 1:1 (RNH: AgNO3). In the spectrophotometric method, the absorbance is found to increase linearly with concentration of RNH which is corroborated by the correlation coefficient of 0.9959. The system obey Beer's law for 5-70 µg mL-1. The calculated apparent molar absorptivity and sandell sensitivity values are found to be 3.27 ´ 10³ L mol-1 cm-1, 0.107 µg cm-2 respectively. The limits of detection and quantification are also reported for the spectrophotometric method. Intra-day and inter-day precision and accuracy of the methods were evaluated as per ICH guidelines. The methods were successfully applied to the assay of RNH in formulations and the results were compared with those of a reference method by applying Student's t and F-tests. No interference was observed from common pharmaceutical excipients. The accuracy of the methods was further ascertained by performing recovery tests by standard addition method.

Spectrophotometric determination of metronidazole through Schiff's base system using vanillin and PDAB reagents in pharmaceutical preparations

Two simple sensitive and reproducible spectrophotometric methods have been developed for the determination of metronidazole either in pure form or in their tablets. The proposed methods are based on the reduction of the nitro group to amino group of the drug. The reduction of metronidazole was carried out with zinc powder and 5 N hydrochloric acid at room temperature in methanol. The resulting amine was then subjected to a condensation reaction with aromatic aldehyde namely, vanillin and p-dimethyl amino benzaldehyde (PDAB) to yield yellow colored Schiff's bases. The formed Schiff's bases are quantified spectrophotometrically at their absorption maxima at 422 nm for vanillin and 494 nm for PDAB. Beer's law was obeyed in the concentration ranges 10 to 65 µg mL-1 and 5 to 40 µg mL-1 with a limit of detection (LOD) of 0.080 µg mL-1 and 0.090 µg mL-1 for vanillin and PDAB, respectively. The mean percentage recoveries were found to be 100.05 ± 0.37 and 99.01 ± 0.76 for the two methods respectively. The proposed methods were successfully applied to determine the metronidazole in their tablet formulations and the results compared favorably to that of reference methods. The proposed methods are recommended for quality control and routine analysis.

Sensitive spectrophotometric determination of lamotrigine in bulk drug and pharmaceutical formulations using bromocresol green

Two new, simple, rapid and reproducible spectrophotometric methods have been developed for the determination of lamotrigine (LMT) both in pure form and in its tablets. The first method (method A) is based on the formation of a colored ion-pair complex (1:1 drug/dye) of LMT with bromocresol green (BCG) at pH 5.02±0.01 and extraction of the complex into dichloromethane followed by the measurement of the yellow ion-pair complex at 410 nm. In the second (method B), the drug-dye ion-pair complex was dissolved in ethanolic potassium hydroxide and the resulting base form of the dye was measured at 620 nm. Beer's law was obeyed in the concentration range of 1.5-15 µg mL-1 and 0.5-5.0 µg mL-1 for method A and method B, respectively, and the corresponding molar absorptivity values are 1.6932 x 10(4) and 3.748 x 10(4) L mol-1cm-1. The Sandell sensitivity values are 0.0151 and 0.0068 µg cm-2 for method A and method B, respectively. The stoichiometry of the ion-pair complex formed between the dug and dye (1:1) was determined by Job's continuous variations method and the stability constant of the complex was also calculated. The proposed methods were applied successfully for the determination of drug in commercial tablets.

Functional cellulose microspheres for pharmaceutical applications

Dissolving cellulose is the first main step in preparing novel cellulosicmaterials. Since cellulosic fibres cannot be easily dissolved in water-based solvents, fibres were pretreated with ethanol-acid solution prior to the dissolution. Solubility and changes on the surface of the fibres were studied with microscopy and capillary viscometry. After the treatment, the cellulose fibres were soluble in alkaline urea-water solvent. The nature of this viscous solution was studied rheologically. Cellulose microspheres were prepared by extruding the alkaline cellulose solution through the needle into an acidic medium. By altering the temperature and acidity of the mediumit was possible to adjust the specific surface area and pore sizes of themicrospheres. A typical skin-core structure was found in all samples. Microspheres were oxidised in order to introduce anionic carboxylic acid groups (AGs). Anionic microspheres are more hydrophilic; their water-uptake increased 25 times after oxidation and they could swell almost to their original state (88%) after drying and shrinking. Swelling was studied in simulated physiological environments, corresponding to stomach acid and intestines (pH 1.2-7.4). Oxidised microspheres were used as a drug carriers. They demonstrated a highmass uniformity, which would enable their use for personalised dosing among different patients, including children. The drug was solidified in microspheres in amorphous form. This enhanced solubility and could be used for more challenging drugs with poor solubility. The pores of themicrospheres also remained open after the drug was loaded and they were dried. Regardless of the swelling, the drug was released at a constant rate in all environments.

Globalization of pharmaceutical R&D. Pharmaceutical R&D governance forms in People's Republic of China

Yrityksen selviytyminen ja menestyminen ovat riippuvaisia sen kyvystä innovoida, luoda tietoa ja hyödyntää tietämystä ja keksintöjä (Dunk ja Kilgore 2001). Yrityksen menestyminen erityisesti korkean teknologian alalla on siten suoraan riippuvainen sen T&T:stä, johon tehdyt investoinnit tuovat merkittäviä taloudellisia etuja yritykselle uusien tuotteiden, palveluiden ja prosessien muodossa (McEvily ja Chakravarthy 1999). Teknologinen etumatka ja sen tuotteistaminen innovatiivisiksi tarjoamiksi mahdollistaa monopolististen etujen saavuttamisen yrityksen kansainvälisessä kilpailussa (Lall 1977). Tämä kaltainen kilpailuetu voidaan saavuttaa yrityksen kyvyllä yhdistää maantieteellisesti hajautettu T&T:nsä tehokkaaksi verkostoksi (Porter 1986). Boehen (2008) mukaan T&T:n globalisoitumista voidaan johtaa eri hallintömuodoilla: T&T:n kansainvälistymisellä, T&T:n ulkomaille sijoittamisella ja T&T ulkomaille ulkoistamisella. T&T:n globalisoituminen on osa 2000-luvun taloudellista muutosta, ja sille on esitetty useita vaikuttavia tekijöitä, kuten kustannuserot, työvoimaresurssit, erityisosaamiskeskukset, paikallinen teknologia osaaminen ja kohdemarkkinoiden potentiaali (bardhan 2006; Norwood, ym. 2006; von Zedtwitz ja Gassmann 2002). Tutkimuksen on osoitettu eroavan tuotekehityksestä ja eri tekijöiden on osoitettu vaikuttavan niihin (von Zedtwitz ja Gassmann 2002; Leifer ja Triscari 1987). Samoin T&T on osoitettu olevan jatkumo perustavanlaatuisesta soveltavaan ja lääkekehityksen muodostavan vastaavan T&T jatkumon (Lall 1980; Iansiti 1993), jonka yksittäiset osat vaikuttavat sen hallintomuotoon. Tutkimus esittää eri tekijöitä voivan hyödyntää hallintomuodosta riippuen. Tätä tutkimusta varten tutkija haastatteli lääketeollisuuden johtajia Kiinassa vahvistaakseen tai hylätäkseen eri tekijöitä ja niiden suhdetta lääketeollisen T&T:n hallintomuotoihin. Markkinoiden todettiin olevan ensisijainen tekijä mutta myös kustannuserojen, insentiivien, työvoimaresurssien ja erityisosaamiskeskusten merkitys T&T:n globalisoitumiseen vaikuttavina tekijöinä vahvistettiin yhdessä perusvaatimusten ja riskitekijöiden kanssa. Tutkimuksessa vahvistetaan myös lääketeollisen T&T-jatkumon vaikutus ja esitetään viitekehys hallintomuodoille.

Globalization of pharmaceutical R&D Pharmaceutical R&D governance forms in People's Republic of China

Firm's survival and success, which are dependent on its ability to innovate, to create knowledge and to capitalize on inventions and know-how, is in essence directly linked to its R&D process (Dunk and Kilgore 2001). Especially in technology driven industries, such as the pharmaceuticals, there are significant positive returns to R&D investments through introduction of new or improved products and services (McEvily and Chakravarthy 1999). Technological lead and its transformation to innovative products as fruits of corporate R&D can be seen as monopolistic advantage that helps enterprises to compete in today’s market (Lall 1977). This competitive advantage can be derived from corporation's ability to integrate its activities across geographic locations (Porter 1986). According to Boehe (2008) globalization of R&D can executed with different governance forms: R&D internationalization, R&D offshoring or R&D offshore outsourcing. Globalization of R&D is intervened with the changes in global economy of the 21st century. Some studies argue for its influencing factors to be access to vast skilled labor pools and centers of excellence (Bardhan 2006). Other studies indicate the R&D cost differentials between countries to be the major expected benefit (Norwood et al. 2006). Von Zedtwitz and Gassmann (2002) presented benefits as divided to accessing markets and customers or to accessing local science and technology. This study proposes that based on governance form distinct factor derived benefits can be capitalized. To corroborate or refute factors and their relations on R&D globalization governance forms, an empirical study based on expert interviews of pharmaceutical directors was conducted in the People's Republic of China. The market was found to be the major influencing factor. Local requirements and adaptation were corroborated as factors connected with markets. Furthermore, influencing factors, such as labour, centers of excellence, cost, financial incentives were corroborated together with conditional and risk factors. Furthermore this research argues that the globalization of pharmaceutical R&D is dependent on the financial, scientific and operational requirements of the drug discovery stage. And thus establishes the influence of drug discovery's stages continuum on pharmaceutical R&D globalization. Finally, a R&D globalization governance form decision framework is proposed based on the frameworks presented in literature and author's corroborated empirical findings.

New Spectrophotometric Methods for the Determination of Nimesulide

Two simple and sensitive spectrophotometric methods (A and B)in the visible region have been developed for the determination of nimesulide in bulk and in dosage forms.Method A is based on the reaction of reduced nimesulide with nitrous acid followed by its coupling with phloroglucinol to yield an yellow colored azo dye with an absorption maximum of 400 nm and method B is based on the reaction of reduced nimesulide with p-dimethylamino benzaldehyde(PDAB) to form an yellow colored chromogen wiht an absorption maximum of 415 nm.When pharmaceutical preparations (Tablets and suspension) were analysed, the results obtained by the proposed methods are in good agreement with the labelled amounts and are comparable with the results obtained by a reported method.recovery in both the method is 98-101 %.

Pharmaceutical consumption and residuals potentially relevant to nutrient cycling in Greater Accra, Ghana

Recycling nutrients form sanitary wastes back into agricultural ecosystems offers an option to alleviate soil depletion in regions where the use of mineral fertiliser is limited. Exemplary nutrient and water cycling approaches, including collection, treatment and use of human urine, are established at Valley View University (VVU) in Greater Accra, Ghana. Concerns have been recently raised in regard to fate and impact of pharmaceutical residues in soils and interlinked environment. To evaluate in how far emerging knowledge can be transposed onto VVU, urban and rural environments in Greater Accra, spatial disease occurrence and drug consumption patterns were studied. Malaria has been found to represent the most severe health burden in Ghana, but there is also a high prevalence of infectious diseases. Drugs consumed in great quantities and in respect to their residual loads potentially problematic in the environment belong to therapeutic groups of: antibiotics, analgesics, drugs for diabetes, antimalarials, cardiovascular drugs and anthelmintics. Drug consumption revealed to be highest in urban and lowest in rural areas. At VVU the range of consumed drugs is comparable to urban areas except for the negligible use of diabetes and cardiovascular medication as well as contraceptives.