Lead and aluminum bonding in Pb-Al metaphosphate glasses

The bonding properties of cations in phosphate glasses determine many short- and medium-range structural features in the glass network, hence influencing bulk properties. In this work, Pb-Al-metaphosphate glasses (1 - x)Pb-(PO(3))(2)center dot xAI(PO(3))(3) with 0 <= - x <= 1 were analyzed to determine the effect of the substitution of Pb by Al on the glass structure in the metaphosphate composition. The glass transition temperature and density were measured as a function of the Al concentration. The vibrational and structural properties were probed by Raman spectroscopy and nuclear magnetic resonance of (31)P, (27)Al, and (207)Pb. Aluminum incorporates homogeneously in the glass creating a stiffer and less packed network. The average coordination number for Al decreases from 5.9 to 5.0 as x increases from 0.1 to 1, indicating more covalent Al-O bonds. The coordination number of Pb in these glasses is greater than 8, showing an increasing ionic behavior for compositions richer in Al. A quantitative analysis of the phosphate speciation shows definite trends in the bonding of AlO(n) groups and phosphate tetrahedra. In glasses with x < 0.48, phosphate groups share preferentially only one nonbridging O corner with an AlO(n) coordination polyhedron. For x > 0.48 more than one nonbridging O can be linked to AlO(n) polyhedra. There is no corner sharing of O between AlO(n) and PbO(n) polyhedra nor between AlO(n) themselves throughout the compositional range. The PbO(n) coordination polyhedra show considerable nonbridging O sharing, with each O participating in the coordination sphere of at least two Pb. The bonding preferences determined for Al are consistent with the behavior observed in Na-Al and Ca-Al metaphosphates, indicating this may be a general behavior for ternary phosphate glasses.

Footemineite, the Mn-analog of atencioite, from the Foote mine, Kings Mountain, Cleveland County, North Carolina, USA, and its relationship with other roscherite-group minerals

Footemineite, ideally Ca2Mn2+square Mn22+Be4(PO4)(6)(OH)(4)-6H(2)O, triclinic, is a new member of the roscherite group. It occurs on thin fractures crossing quartz-microcline-spodumene pegmatite at the Foote mine, Kings Mountain, Cleveland County, North Carolina, U.S.A. Associated minerals are albite, analcime, eosphorite, siderite/rhodochrosite, fairfieldite, fluorapatite, quartz, milarite, and pyrite. Footemineite forms prismatic to bladed generally rough to barrel-shaped crystals up to about 1.5 mm long and I mm in diameter. Its color is yellow, the streak is white, and the luster is vitreous to slightly pearly. Footemineite is transparent and non-fluorescent. Twinning is simple, by reflection, with twin boundaries across the length of the crystals. Cleavage is good on {0 (1) over bar1}) and {100}. Density (calc.) is 2.873 g/cm(3). Footemineite is biaxial (-), n(alpha) = 1.620(2), n(beta) = 1.627(2), n(gamma) = 1.634(2) (white light). 2V(obs) = 80 degrees, 2V(calc) = 89.6 degrees. Orientation: X boolean AND b similar to 12 degrees, Y boolean AND c similar to 15 degrees, Z boolean AND a similar to 15 degrees. Elongation direction is c, dispersion: r > v or r < v, weak. Pleochroism: beta (brownish yellow) > alpha = gamma (yellow). Mossbauer and IR spectra are given. The chemical composition is (EDS mode electron microprobe, Li and Be by ICP-OES, Fe3+:Fe2+ y Mossbauer, H2O by TG data, wt%): Li2O 0.23, BeO 9.54, CaO 9.43, SrO 0.23, BaO 0.24, MgO 0.18, MnO 26.16, FeO 2.77, Fe2O3 0.62, Al2O3 0.14, P2O5 36.58, SiO2 0.42, H2O 13.1, total 99.64. The empirical formula is (Ca1.89Sr0.03Ba0.02)Sigma(1.94)(Mn-0.90(2+)square(0.10))Sigma(1.00)(square 0.78Li0.17Mg0.05) Sigma(1.00)(Mn3.252+Fe0.432+ Fe0.093+Al0.03)Sigma(3.80) Be-4.30(P5.81Si0.08O24)[(OH)3.64(H2O)0.36]Sigma(4.00)center dot 6.00H(2)O . The strongest reflection peaks of the powder diffraction pattern [d, angstrom (1, %) (hkl)] are 9.575 (53) (010), 5.998 (100) (0 (1) over bar1), 4.848 (26) (021), 3.192 (44) (210), 3.003 (14) (0 (2) over bar2), 2.803 (38) ((1) over bar 03), 2.650 (29) ((2) over bar 02), 2.424 (14) (231). Single-crystal unit-cell parameters are a = 6.788(2), b = 9.972(3), c = 10.014(2) A, (x = 73.84(2), beta = 85.34(2), gamma = 87.44(2)degrees,V = 648.74 angstrom(3), Z = 1. The space group is P (1) over bar. Crystal structure was refined to R = 0.0347 with 1273 independent reflections (F > 2(5). Footemineite is dimorphous with roscherite, and isostructural with atencioite. It is identical with the mineral from Foote mine described as ""triclinic roscherite."" The name is for the Foote mine, type locality for this and several other minerals.

Feasibility of using in situ fusion for the determination of Co, Cr and Mn in Portland cement by direct solid sampling graphite furnace atomic absorption spectrometry

In situ fusion on the boat-type graphite platform has been used as a sample pretreatment for the direct determination of Co, Cr and Mn in Portland cement by solid sampling graphite furnace atomic absorption spectrometry (SS-GF AAS). The 3-field Zeeman technique was adopted for background correction to decrease the sensitivity during measurements. This strategy allowed working with up to 200 mu g of sample. The in situ fusion was accomplished using 10 mu L of a flux mixture 4.0% m/v Na(2)CO(3) + 4.0% m/v ZnO + 0.1% m/v Triton (R) X-100 added over the cement sample and heated at 800 degrees C for 20 s. The resulting mould was completely dissolved with 10 mu L of 0.1% m/v HNO(3). Limits of detection were 0.11 mu g g(-1) for Co, 1.1 mu g g(-1) for Cr and 1.9 mu g g(-1) for Mn. The accuracy of the proposed method has been evaluated by the analysis of certified reference materials. The values found presented no statistically significant differences compared to the certified values (Student`s t-test, p<0.05). In general, the relative standard deviation was lower than 12% (n = 5). (C) 2009 Elsevier B.V. All rights reserved.

Adsorption of CuX2 (X = Cl-, Br-, and ClO4-) on a silica gel surface chemically modified with thiazolidine-2-thione from acetone and ethanol solutions

The isotherms of adsorption of CuX2 (X = Cl-, Br, ClO4-,) by silica gel chemically modified with thiazolidine-2-thione were studied in acetone (ac) and ethanol (eth) solutions at 25 degrees C. The following equilibrium constants (in 1 mol(-1)) were determined: a) CuCl2, 1.9 x 10(3) (ac), 1.6 x 10(3) (eth); b) CuBr2, 1.7 x 10(3) (ac), 1.2 x 10(3) (eth); c) Cu(ClO4)(2), 1.1 x 10(3) (ac), 1.0 x 10(3) (eth). The electron spin resonance spectra of the surface complexes indicate a tetragonal distorted structure in the case of lower degrees of metal loading on the chemically modified surface. The d-d electronic transition spectra show that for the ClO4- complex, the peak of absorption did not change for any degree of metal loading, and for Cl- and Br complexes, the peak maxima shift to higher energy with lower metal loading.

Measurement of inclusive differential cross sections for Upsilon(1S) production in p(p)over-bar collisions at root s=1.96 TeV

We present measurements of the inclusive production cross sections of the Upsilon(1S) bottomonium state in p (p) over bar collisions at root s=1.96 TeV. Using the Upsilon(1S)->mu(+)mu(-) decay mode for a data sample of 159 +/- 10 pb(-1) collected by the D0 detector at the Fermilab Tevatron collider, we determine the differential cross sections as a function of the Upsilon(1S) transverse momentum for three ranges of the Upsilon(1S) rapidity: 0 <\y(Upsilon)\<= 0.6, 0.6 <\y(Upsilon)\<= 1.2, and 1.2 <\y(Upsilon)\<= 1.8.

Search for the flavour-changing neutral current B-s(0)->mu+mu- in p(p)over-bar collisions at root s=1.96 TeV with the D0 dectector

We present the results of a search for the flavor-changing neutral current decay B-s(0)-->mu(+)mu(-) using a data set with integrated luminosity of 240 pb(-1) of p (p) over bar collisions at roots=1.96 TeV collected with the D0 detector in run II of the Fermilab Tevatron collider. We find the upper limit on the branching fraction to be B(B-s(0)-->mu(+)mu(-))less than or equal to5.0x10(-7) at the 95% C.L. assuming no contributions from the decay B-d(0)-->mu(+)mu(-) in the signal region. This limit is the most stringent upper bound on the branching fraction B-s(0)-->mu(+)mu(-) to date.

Search for first-generation scalar leptoquarks in p(p)over-bar collisions at root s=1.96 TeV

We report on a search for pair production of first-generation scalar leptoquarks (LQ) in p (p) over bar collisions at root s=1.96 TeV using an integrated luminosity of 252 pb(-1) collected at the Fermilab Tevatron collider by the D0 detector. We observe no evidence for LQ production in the topologies arising from LQ(LQ) over bar -> eqeq and LQ(LQ) over bar -> eq nu q, and derive 95% C.L. lower limits on the LQ mass as a function of beta, where beta is the branching fraction for LQ -> eq. The limits are 241 and 218 GeV/c(2) for beta=1 and 0.5, respectively. These results are combined with those obtained by D0 at root s=1.8 TeV, which increases these LQ mass limits to 256 and 234 GeV/c(2).

Measurement of the t(t)over-bar production cross section in p(p)over-bar collisions at root s=1.96 TeV using lepton plus jets events with lifetime b-tagging

We present a measurement of the top quark pair (t (t) over bar) production cross section (sigma(t (t) over bar)) in pp collisions at root s = 1.96 TeV using 230 pb(-1) of data collected by the DO experiment at the Fermilab Tevatron Collider. We select events with one charged lepton (electron or muon), missing transverse energy, and jets in the final state. We employ lifetime-based b-jet identification techniques to further enhance the t F purity of the selected sample. For a top quark mass of 175 GeV, we measure sigma(t (t) over bar) 8.6(-1.5)(+1.6) (stat. + syst.) +/- 0.6(lumi.) pb, in agreement with the standard model expectation. (c) 2005 Published by Elsevier B.V.

Measurement of the t(t)over-bar production cross section in p(p)over-bar collisions at root s=1.96 TeV using kinematic characteristics of lepton plus jets events

We present a measurement of the top quark pair (t (t) over bar) production cross section (sigma(t (t) over bar)) in pp collisions at a center-of-mass energy of 1.96 TeV using 230 pb(-1) of data collected by the DO detector at the Fermilab Tevatron Collider. We select events with one charged lepton (electron or muon), large missing transverse energy, and at least four jets, and extract the t (t) over bar content of the sample based on the kinematic characteristics of the events. For a top quark mass of 175 GeV, we measure sigma(t (t) over bar) 6.7(-1.3)(+1.4)(stat)(-1.1)(+1.6)(syst) +/- 0.4(lumi) pb, in good agreement with the standard model prediction. (c) 2005 Elsevier B.V. All rights reserved.

Search for pair production of second generation scalar leptoquarks in p(p)over-bar collisions at root s-=1.96 TeV

We report on a search for the pair production of second generation scalar leptoquarks (LQ(2)) in p (p) over bar collisions at the center-of-mass energy, root s = 1.96 TeV, using data corresponding to an integrated luminosity of 294 19 pb(-1) recorded with the DO detector. No evidence for a leptoquark signal in the LQ(2)LQ(2) -> mu q mu q channel has been observed, and upper bounds on the product of cross section times branching fraction were set. This yields lower mass limits of m(LQ2) > 247 GeV/c(2) for beta = B(LQ(2) -> mu q) = 1 and m(LQ2) > 182 GeV/c(2) for beta = 1/2. Combining these limits with previous DO results, the lower limits on the mass of a second generation scalar leptoquark are m(LQ2) > 251 GeV/c(2) and m(LQ2) > 204 GeV/c(2) for beta = I and beta = 1/2, respectively. (c) 2006 Elsevier B.V. All rights reserved.

Measurement of the t(t)over-bar production cross section in p(p)over-bar collisions at root s=1.96 TeV using secondary vertex b tagging

We report a new measurement of the t (t) over bar production cross section in p (beta) over bar collisions at a center-of-mass energy of 1.96 TeV using events with one charged lepton (electron or muon), missing transverse energy, and jets. Using 425 pb(-1) of data collected using the D0 detector at the Fermilab Tevatron Collider, and enhancing the t (t) over bar content of the sample by tagging b jets with a secondary vertex tagging algorithm, the t (t) over bar production cross section is measured to be sigma(p (t) over bar -> t (t) over bar +X)=6.6 +/- 0.9(stat+syst) +/- 0.4(lum) pb. This cross section is the most precise D0 measurement to date for t (t) over bar production and is in good agreement with standard model expectations.

Measurement of the WW production cross section in p(p)over-bar collisions at root(s)over-bar=1.96 TeV

We present a measurement of the W boson pair-production cross section in p(p) over bar collisions at a center-of-mass energy of root s=1.96 TeV. The data, collected with the Run II D0 detector at Fermilab, correspond to an integrated luminosity of 224-252 pb(-1) depending on the final state (ee, e mu, or mu mu). We observe 25 candidates with a background expectation of 8.1 +/- 0.6(stat)+/- 0.6(syst)+/- 0.5(lum) events. The probability for an upward fluctuation of the background to produce the observed signal is 2.3x10(-7), equivalent to 5.2 standard deviations. The measurement yields a cross section of 13.8(-3.8)(+4.3)(stat)(-0.9)(+1.2)(syst)+/- 0.9(lum) pb, in agreement with predictions from the standard model.

Search for neutral supersymmetric Higgs bosons in multijet events at root s=1.96 TeV

We have performed a search for neutral Higgs bosons produced in association with bottom quarks in p (p) over bar collisions, using 260 pb(-1) of data collected with the D0 detector in Run II of the Fermilab Tevatron Collider. The cross sections for these processes are enhanced in many extensions of the standard model (SM), such as in its minimal supersymmetric extension at large tan beta. The results of our analysis agree with expectations from the SM, and we use our measurements to set upper limits on the production of neutral Higgs bosons in the mass range of 90 to 150 GeV.

Search for neutral Higgs bosons decaying to tau pairs in p(p)over-bar collisions at root s=1.96 TeV

A search for the production of neutral Higgs bosons Phi decaying into tau(+)tau(-) final states in p (p) over bar collisions at a center-of-mass energy of 1.96 TeV is presented. The data, corresponding to an integrated luminosity of approximately 325 pb(-1), were collected by the D0 experiment at the Fermilab Tevatron Collider. Since no excess compared to the expectation from standard model processes is found, limits on the production cross section times branching ratio are set. The results are combined with those obtained from the D0 search for Phi b((b) over bar)-> b (b) over barb((b) over bar) and are interpreted in the minimal supersymmetric standard model.

Limits on anomalous trilinear gauge couplings from WW -> e(+)e(-), WW -> e(+/-)mu(-/+), and WW ->mu(+)mu(-) events from pp collisions at root s=1.96 TeV

Limits are set on anomalous WW gamma and WWZ trilinear gauge couplings using W+W--> e(+)nu(e)e(-)(nu) over bar (e), W+W--> e(+/-)nu(e)mu(-/+)nu(mu), and W+W-->mu(+)nu(mu)mu(-)(nu) over bar (mu) events. The data set was collected by the Run II D0 detector at the Fermilab Tevatron Collider and corresponds to approximately 250 pb(-1) of integrated luminosity at root s=1.96 TeV. Under the assumption that the WW gamma couplings are equal to the WWZ couplings and using a form factor scale of Lambda=2.0 TeV, the combined 95% C.L. one-dimensional coupling limits from all three channels are -0.32