Biocompatibility of two current adhesive resins

The purpose of the study was to evaluate the biocompatibility of two current adhesive resins and a calcium hydroxide cement. Fifty-four polyethylene tubes were filled with these dental materials, which were hand-mixed or light-cured according to the manufacturer's directions: group 1-Clearfill Liner Bond 2 (Kuraray); group 2-Single Bond (3M); and group 3-calcium hydroxide cement (Dycal-Dentsply). The materials were implanted into dorsal connective tissue of rats, which were killed 7, 30, and 60 days after the implantation procedure. The implant sites were excised, immersed in buffered Karnovsky's fixative, and processed using routine histological techniques. Sections of 6 μm thickness were stained with hematoxylin and eosin and assessed under light microscopy. Both adhesive resins at 7 days elicited a moderate/intense inflammatory reaction that decreased over time. Fibrous capsules surrounding the tubes were observed at 30 days. Half of the samples in groups 1 and 2 showed thin fibrous capsule formation containing macrophages, capillaries, lymphocytes, fibroblasts, and collagen fibers. Connective tissue healing was observed even though many specimens exhibited a persistent inflammatory reaction mediated by macrophages and giant cells at the 60-day evaluation. Dycal allowed complete healing at 30 days with only a thin fibrous capsule. In conclusion, all experimental materials were successfully walled off by the connective tissue of the rat. However the adhesive resins may release particulates that may, in turn, induce a persistent local inflammatory reaction. Consequently, in this specific condition, these materials cannot be regarded as biocompatible. Dycal was less irritating than the adhesive resins and was better tolerated by the connective tissue. Copyright © 2000 by The American Association of Endodontists.

Response of human pulps capped with a self-etching adhesive system

Objective: The aim of this study was to evaluate the human pulp response following direct pulp capping with a current self-etching bonding agent and calcium hydroxide (CH). Methods: Thirty-three sound human premolars had their pulp tissue mechanically exposed. Sterile distilled water was used to control the hemorrhage and exudation from the pulp exposure site. The pulps were capped with Clearfil Liner Bond 2 (CLB-2) or CH and the cavities were filled with a resin composite (Z-100) according to the manufacturer's instructions. After 5, 30 and 120-300 days, the teeth were extracted and processed for microscopic examination. Results: At short-term, CLB-2 elicited a mild to moderate inflammatory pulp response with dilated and congested blood vessels adjacent to pulp exposure site. With time, macrophages and giant cells engulfing globules and particulates of resinous material displaced into the pulp space were observed. This chronic inflammatory pulp response triggered by fragments of bonding agent displaced into the pulp space did not allow pulp repair interfering with the dentin bridging. On the other hand, pulps capped with CH exhibited an initial organization of elongated pulp cells underneath the coagulation necrosis. Pulp repair and complete dentin bridge formation was observed at long-term evaluation. Significance: The present study demonstrated that CH remains the pulp capping agent of choice for mechanically exposed human pulps. CLB-2 did not allow complete connective tissue repair adjacent to the pulp exposure site. Consequently, this bonding agent cannot be recommended for pulp therapy of sound human teeth. © 2001 Academy of Dental Materials. Published by Elsevier Science Ltd. All rights reserved.

Occupational exposure to paint solvents and particulate material in car repair shops

Aims: We evaluated solvents and total particulates exposures in auto body repair shops together with a search of painter's related complaints. Methods: 26 painters exposures were evaluated by pumped personal sampling; solvents were retained in charcoal sorbent tubes and the particulates in PVC filters. Painter's personal habits and their work characteristics were obtained through a questionnaire, applied in a private interview. For the symptoms the Q16 questionnaire was used, added of questions about complaints during the painting. Results: High exposures were detected during spray painting. For solvents, the TLV-STEL adjusted for the mixtures was surpassed in six evaluations. However, as repaint is a short-term operation, it makes the average concentrations weighed for the work shift lower than the TLV-TWA adjusted for the mixtures. Total particulate concentrations had surpassed the TLV-TWA in four of the evaluations. Symptoms frequency in the Q16 questionnaire was higher for painters than for the controls (Mann-Whitney test U=193; p=0.008), and they showed positive correlations with the age (Spearman r=0.354, t=1.85, p=0.076), the number of years in the profession (Spearman r=0.433, t=2.35, p=0.027) and the alcoholic beverage consumption (Spearman r=0.457, t=2.516, p=0.019). Conclusions: The painting work done at car repair shops can result in high solvent and particulate exposures, although they are short-term operations. Their acute and chronic effects for the painters do not have been clearly evidenced in the present study, continuing deserving multidisciplinary attention.

Preparation of films from aluminum acetylacetonate by plasma sputtering

Aluminum acetylacetonate has been reported as a precursor for the deposition of alumina films using different approaches. In this work, alumina-containing films were prepared by plasma sputtering this compound, spread directly on the powered lowermost electrode of a reactor, while grounding the substrates mounted on the topmost electrode. Radiofrequency power (13.56 MHz) was used to excite the plasma from argon atmosphere at a working pressure of 11 Pa. The effect of the plasma excitation power on the properties of the resulting films was studied. Film thickness and hardness were measured by profilometry and nanoindentation, respectively. The molecular structure and chemical composition of the layers were analyzed by Fourier transform infrared spectroscopy and energy dispersive spectroscopy. Surface micrographs, obtained by scanning electron microscopy, allowed the determination of the sample morphology. Grazing incidence X-ray diffraction was employed to determine the structure of the films. Amorphous organic layers were deposited with thicknesses of up to 7 μm and hardness of around 1.0 GPa. The films were composed by aluminum, carbon, oxygen and hydrogen, their proportions being strongly dependent on the power used to excite the plasma. A uniform surface was obtained for low-power depositions, but particulates and cracks appeared in the high-power prepared materials. The presence of different proportions of aluminum oxide in the coatings is ascribed to the different activations promoted in the metalorganic molecule once in the plasma phase. Copyright © 2013 John Wiley & Sons, Ltd. Copyright © 2013 John Wiley & Sons, Ltd.

Corrosion and tribocorrosion behaviour of Al-Si-Cu-Mg alloy and its composites reinforced with B4C particles in 0.05M NaCl solution

The corrosion behaviour of metal matrix composites (MMCs) is strictly linked with the presence of heterogeneities such as reinforcement phase, microcrevices, porosity, secondary phase precipitates, and interaction products. Most of the literature related to corrosion behaviour of aluminium matrix composites (AMCs) is focused on SiC reinforced AMCs. On the other hand, there is very limited information available in the literature related to the tribocorrosion behaviour of AMCs. Therefore, the present work aims to investigate corrosion and tribocorrosion behaviour of Al-Si-Cu-Mg alloy matrix composites reinforced with B4C particulates. Corrosion behaviour of 15 and 19% (vol) B4C reinforced Al-Si-Cu-Mg matrix composites and the base alloy was investigated in 0.05M NaCl solution by performing immersion tests and potentiodynamic polarisation tests. Tribocorrosion behaviour of Al-Si-Cu-Mg alloy and its composites were also investigated in 0.05M NaCl solution. The tests were carried out against alumina ball using a reciprocating ball-on-plate tribometer. Electrochemical measurements were performed before, during, and after the sliding tests together with the recording of the tangential force. Results suggest that particle addition did not affect significantly the tendency of corrosion of Al-Si-Cu-Mg alloy without mechanical interactions. During the tribocorrosion tests, the counter material was found to slide mainly on the B4C particles, which protected the matrix alloy from severe wear damage. Furthermore, the wear debris were accumulated on the worn surfaces and entrapped between the reinforcing particles. Therefore, the tendency of corrosion and the corrosion rate decreased in Al-Si-Cu-Mg matrix B4C reinforced composites during the sliding in 0.05M NaCl solution. © 2013 Elsevier B.V.

Avaliação de mutagenicidade, citotoxicidade e expressão de proteínas relacionadas a apoptose, Bak, BCL-2 e P53 fosforilado, em células tratadas com fuligem e particulado total de queima de cana-de-açúcar

Pós-graduação em Biociências e Biotecnologia Aplicadas à Farmácia - FCFAR

Estudo da emissão e do controle dos gases e particulados provenientes da queima de biomassa

Pós-graduação em Engenharia Mecânica - FEG

Análise experimental sobre velocidade de captura em sistemas de transporte pneumático

A velocidade de transporte é um dos mais importantes parâmetros no transporte pneumático de sólidos. O êxito no transporte de materiais particulados depende da predição ou da determinação da velocidade mínima de transporte. Uma velocidade acima daquela necessária ao transporte estável das partículas sólidas conduz a um grande consumo de energia devido ao aumento na perda de pressão do sistema, degradação dos sólidos e abrasão dos sólidos e da tubulação. Já uma velocidade abaixo desse valor limite certamente resultará na deposição das partículas sólidas para o fundo da tubulação e conseqüentemente o entupimento desta. Neste trabalho, uma técnica para medir a velocidade mínima de captura de partículas sólidas em uma tubulação na direção horizontal em um sistema de Transporte Pneumático é desenvolvida. Ela baseia-se em observações visuais do comportamento das partículas ao ocorrer a captura, em medidas da velocidade de operação do gás e da massa das partículas capturadas. É realizada ainda a análise qualitativa de alguns parâmetros que influenciam na velocidade de captura das partículas, permitindo uma maior compreensão dos fenômenos envolvidos.

Hidrocarbonetos policíclicos aromáticos em sedimentos e organismos bentônicos do Terminal de Miramar (Baía do Guajará - Belém - Pará - Amazônia)

ABSTRACT: In Guajará bay, mouth of the Amazon River, is located the capital of Pará state (Belém) and its metropolitan area. Exists in this area an intense boat traffic, as well as transportation and sale of fuels in floating docks and activities related to the storage and transportation of oil in Miramar Petrochemical Terminal (TEMIR). Small spills and discharges of oil in water can serve as sources of pollution by polycyclic aromatic hydrocarbons (PAHs). PAHs are organic compounds generated by incomplete combustion of organic matter (OM) and are among the contaminants of most interest in environmental studies due to their mutagenic and carcinogenic potential. One way to detect and evaluate the impact of PAHs in an environment is using biomonitors, however the qualitative and quantitative analysis in sediments are most widely used. This study aimed to evaluate, by Gas Chromatography/Mass Spectrometry (GC/MS), the 16 PAHs considered as priority by the Environmental Protection Agency of the United States in sediments and benthic organisms (Namalicastys abiuma) of TEMIR. Field expeditions were carried out in December 2012, March, May and June 2013 representing the dried, wet (two samples) and dried seasons successively. Fine sediments levels dominated in both sampling periods and the %Fines in Guajará bays has a direct relationship to the %OM. In relation to the 16 PAHs studied, 10 of them were detected in the wet season sediments samples and 8 in the dried season. Even with a low diversity of aromatic compounds, sediment samples of the dried season presented greater ΣHPAs (1.351,43 ng g^-1) than the sediments of the wet season (263,99 ng g^-1), which can be related to the increased hydrodynamic in Guajará bay this last period. Correlation analysis indicated that ΣHPAs not seem to be influenced by %Fine and %OM. Benzo(a)pyrene accounted for 87% of ΣHPAs during the wet season, the other PAHs showed percentage ≤ 3%. During the other period stood out: pyrene (18% of ΣHPAs) fluoranthene (16%), the chrysene, benzo(b)fluoranthene (15%) and benzo(a)pyrene (11%). The use of the geochemical reason to interpret likely sources of PAHs indicated that there is a predominance of aromatics from pyrolytic origin in TEMIR. The activities that may be responsible for the PAHs levels observed in sediments and benthic organisms in TEMIR are the discharge of untreated domestic sewage and the emissions of particulates from cars and small/medium boats. The ΣHPAs seems to influence the density of polychaetes because a reduction of about 50% in the number of organisms was observed during the dry season when there was the greater amount of ΣHPAs in their body structure. Among the 16 PAHs studied, 11 were detected in the polychaetes during the dry season (ΣHPAs_MED = 848,71 ng g^-1) and 10 in the wet season (ΣHPAs_MED = 141,85 ng g^-1). Were highlighted during the dried season: indeno(1,2,3-c,d)pyrene (47%) and pyrene (23%). While in the wet season: pyrene (23%), chrysene (17%), fluorene (17%) and fluoranthene (13%). The %Rec obtained was >>100% indicating a matrix effect and reducing the quantitative accuracy of results. The use of the polychaete N. abiuma as biomonitor of pollution by PAHs in estuaries not seem to be effective when the sample period is limited, because collecting it requires a great effort to obtain a small amount of mass and it still results in a matrix effect in the chromatographic analysis (method %Rec >> 100%) that may not be corrected due to the restricted availability of sample mass. Studies with a larger number of samples, enabling depth statistical analysis, and covering other collection points in Guajará bay are required to prove mathematically that has been stated in this dissertation.

Fontes e composição das partículas atmosféricas na área urbana e rural da região central do Estado de São Paulo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da fluidodinâmica de uma mistura de sólidos em um leito fluidizado gás-sólido

Fluidization consists in a bed of solid particles acquire fluid behavior by using a fluid (in this case air) flowing through the solid particles. Because of this, it can be a good mix of these materials, as well as to show increased rates of heat and mass transport. The fluid flowing through the spaces between the particles gives an interstitial velocity, that if is too low does not cause movement of the particulates. The gradual increase in speed will generate small vibrations between the particles promotes its fluidization. Our study focus in the fluid state of solid bed , when the fluid velocity reaches a state where the drag forces are sufficient to support the weight of the solid particles making these solids behave like fluids . Knowledge of the minimum velocity required to fluidize that particles is of great importance since below this speed there is no fluidization, and far above it, the solids are carried out of the bed. The fluidized bed reactor is widely used in physics and engineering, particularly in gas-solid fluidization, with emphasis on thermochemical processes

Amostragem de poluentes gasosos e particulados emitidos pela queima de biomassa vegetal

The use of biomass as an energy source has been increasing in Brazil, with emphasis on the use of wood biomass, such as bark, wood chips and sawdust, that after receiving the appropriate treatment can be used in burners for power generation. However, from this burning are emitted fine particles known as particulate matter and a wide range of toxic organic and inorganic components in the form of gases that contribute greatly to air pollution and global warming, affecting human health, the environment and climate. The objective of this project was the quantification of gaseous and particulate, using and evaluating the equipment DR4000 ( Dataram 4 ) sampling of particulates smaller than 2.5μm and EUROTRON ( Ecoline 4000 ) when sampling gaseous pollutants, emitted from the burning of biomass in real time in the firing burner to a chimney attached biomass . We note that there are no specific rules that establish emission limits for particulate matter with diameter less than 2.5μm that are most harmful to human health and the highest concentrations reached about 800000μg/m3, for smaller diameters. It is noticeable the need for sampling of pollutants especially in industries that use biomass to fuel that could be implanted emission control equipment

Estudo da concentração de material particulado em ambientes internos e externos de bibliotecas

Our twenty-first century society and the rhythm of life and work we have to face in our daily routine compel us to spend most of our lifetime in closed environments, in our houses, educational institutions, hospitals, airports, amongst as many others. The study of the air quality in internal environments (IAQ) is very important for monitoring people’s health effects and their environmental comfort in these locations. One essential parameter to analyze this measure is to evaluate the concentration of dispersed particulates in the air, specially focusing on those thinner particles (below the diameter of 2,5 μm), they can pose serious risks for human being because they can remain in the lungs, penetrate through the pores of our skin, amongst other harmful effects on human’s health. In this work the air quality inside the public library Profª Josina Vasques Ferrari and at Unesp public state library was evaluated, both located in Itapeva, as well as a third one, inside the Communitarian Library of the Federal University in Carlos (UFSCar) from march to may in 2012. In those environments it was analyzed if the concentration of particulates pose any real treat to the users. The equipment used for particle sampling in real time was DataRam 4 (Model DR 4000). The results given for those concentrations of particulates in both internal and external environments revealed figures within the safe standard established by the WHO (World Health Organization), from 25 to μg/m³, the only exception occurred on the fifth floor of the UFSCar library, where the average for concentration stayed at 25,30 of μg/m³

Real-time Sampling of Particulate Matter Smaller than 2.5 µm from Amazon Forest Biomass Combustion

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização mineralógica e química das fontes de poeira e sua influência na atmosfera da região do polo cerâmico de Santa Gertrudes (SP)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)