Illinois Phosphorus Effluent Limits: Minimizing the Impacts Through the Use of Non-point Controls at the Springbrook Water Reclamation Center in Naperville, Illinois

Phosphorus pollution is a major concern in Illinois. Excessive amounts of phosphorus can be detrimental to water bodies. To help control phosphorus, the Illinois Pollution Control Board has proposed phosphorus limits on wastewater treatment facility discharges. If enacted, these limits will have negative impacts on the Springbrook Water Reclamation Center in Naperville, Illinois. To minimize these impacts, Naperville can utilize various non-point controls recommended in this paper to decrease the amount of phosphorus entering into the DuPage River and the Springbrook Water Reclamation Center. While these controls will not reduce levels low enough to totally satisfy limits on phosphorus discharges, they will significantly reduce the treatment costs Naperville will need to expend to meet them and be more environmentally effective.

Stabilisation of low softening point petroleum pitch fibres by HNO3

This paper deals with the stabilisation of low softening point pitch fibres obtained from petroleum pitches using HNO3 as oxidising agent. This method presents some advantages compared with conventional methods: pitches with low softening point (SP) can be used to prepare carbon fibres (CF), the stabilisation time has been reduced, the CF yields are similar to those obtained after general methods of stabilisation, and the initial treatments to increase SP when low SP pitches are used to prepare CF, are avoided. The parent pitches were characterised by different techniques such as diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), elemental analysis and solvent extraction with toluene and quinoline. The interaction between HNO3 and the pitch fibres, as well as the changes occurring during the heat treatment, have been followed by DRIFTS.

A new approach for semi-automatic rock mass joints recognition from 3D point clouds

Rock mass characterization requires a deep geometric understanding of the discontinuity sets affecting rock exposures. Recent advances in Light Detection and Ranging (LiDAR) instrumentation currently allow quick and accurate 3D data acquisition, yielding on the development of new methodologies for the automatic characterization of rock mass discontinuities. This paper presents a methodology for the identification and analysis of flat surfaces outcropping in a rocky slope using the 3D data obtained with LiDAR. This method identifies and defines the algebraic equations of the different planes of the rock slope surface by applying an analysis based on a neighbouring points coplanarity test, finding principal orientations by Kernel Density Estimation and identifying clusters by the Density-Based Scan Algorithm with Noise. Different sources of information —synthetic and 3D scanned data— were employed, performing a complete sensitivity analysis of the parameters in order to identify the optimal value of the variables of the proposed method. In addition, raw source files and obtained results are freely provided in order to allow to a more straightforward method comparison aiming to a more reproducible research.

Geometric 3D point cloud compression

The use of 3D data in mobile robotics applications provides valuable information about the robot’s environment but usually the huge amount of 3D information is unmanageable by the robot storage and computing capabilities. A data compression is necessary to store and manage this information but preserving as much information as possible. In this paper, we propose a 3D lossy compression system based on plane extraction which represent the points of each scene plane as a Delaunay triangulation and a set of points/area information. The compression system can be customized to achieve different data compression or accuracy ratios. It also supports a color segmentation stage to preserve original scene color information and provides a realistic scene reconstruction. The design of the method provides a fast scene reconstruction useful for further visualization or processing tasks.

Datasets and results of the research [Discontinuity spacing analysis in rock masses using 3D point clouds]

.bin files should be opened using CloudCompare

Characterization of rock slopes through slope mass rating using 3D point clouds

Rock mass classification systems are widely used tools for assessing the stability of rock slopes. Their calculation requires the prior quantification of several parameters during conventional fieldwork campaigns, such as the orientation of the discontinuity sets, the main properties of the existing discontinuities and the geo-mechanical characterization of the intact rock mass, which can be time-consuming and an often risky task. Conversely, the use of relatively new remote sensing data for modelling the rock mass surface by means of 3D point clouds is changing the current investigation strategies in different rock slope engineering applications. In this paper, the main practical issues affecting the application of Slope Mass Rating (SMR) for the characterization of rock slopes from 3D point clouds are reviewed, using three case studies from an end-user point of view. To this end, the SMR adjustment factors, which were calculated from different sources of information and processes, using the different softwares, are compared with those calculated using conventional fieldwork data. In the presented analysis, special attention is paid to the differences between the SMR indexes derived from the 3D point cloud and conventional field work approaches, the main factors that determine the quality of the data and some recognized practical issues. Finally, the reliability of Slope Mass Rating for the characterization of rocky slopes is highlighted.

Software for video-based multi-point frequency measuring and mapping

Complementary programs

Methods and algorithms for video-based multi-point frequency measuring and mapping

Software for video-based multi-point frequency measuring and mapping: http://hdl.handle.net/10045/53429

Lynn to Halibut Point, Rockport, Massachusetts, Atlantic Coast, 1873 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Eldridge's new chart from Lynn to Halibut Point : with the harbors of Salem, Beverly, Marblehead, Manchester, Gloucester & Rockport, compiled from the latest surveys, [by George Eldridge] ; G.W. Boynton, sc. It was published by S. Thaxter & Son, 1873. Scale [ca. 1:58,370]. This map is a nautical chart covering the Atlantic Coast of Massachusetts from Lynn to Halibut Point, Rockport, Massachusetts. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Massachusetts State Plane Coordinate System, Mainland Zone (in Feet) (Fipszone 2001). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows coastal features such as lighthouses, buoys, beacons, rocks, channels, points, coves, islands, and more. Depths are shown by soundings and shading. Includes sailing directions and table of tides. This layer is part of a selection of digitally scanned and georeferenced historic maps of Massachusetts from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of regions, originators, ground condition dates (1755-1922), scales, and purposes. The digitized selection includes maps of: the state, Massachusetts counties, town surveys, coastal features, real property, parks, cemeteries, railroads, roads, public works projects, etc.

Eastern Point, East Gloucester, Massachusetts, 1888 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Lands of The Eastern Point Associates, East Gloucester, Mass., [by] William H. Foss, engr. and supt. It was published by Forbes Co., Mar. 1st, 1888. Scale [ca. 1:3,550]. Cadastral map showing roads, property lot numbers, dimensions, and areas. Covers Eastern Point and part of East Gloucester, Gloucester, Massachusetts. Relief is shown by hachures. It includes two vignettes. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Massachusetts State Plane Coordinate System, Mainland Zone (in Feet) (Fipszone 2001). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This layer is part of a selection of digitally scanned and georeferenced historic maps of Massachusetts from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of regions, originators, ground condition dates (1755-1922), scales, and purposes. The digitized selection includes maps of: the state, Massachusetts counties, town surveys, coastal features, real property, parks, cemeteries, railroads, roads, public works projects, etc.

1 + 1 = 3? EU-US voting cohesion in the United Nations General Assembly. EU Diplomacy Paper 07/2012, September 2012

This paper investigates the factors that explain the voting cohesion of the United States (US) and the European Union (EU) on foreign policy issues in the United Nations General Assembly (UNGA). It is often argued that the EU and the US are simply too different to cooperate within international organizations and thus to vote the same way, for example, in the UNGA. However, there is still a lack of research on this point and, more importantly, previous studies have not analyzed which factors explain EU-US voting cohesion. In this paper, I try to fill this gap by studying voting cohesion from 1980 until 2011 on issues of both ‘high’ politics (security) and ‘low’ politics (human rights) not only as regards EU-US voting cohesion, but also concerning voting cohesion among EU member states. I test six hypotheses derived from International Relations theories, and I argue that EU-US voting cohesion is best explained by the topic of the issue voted upon, whether an issue is marked as ‘important’ by the US government, and by the type of resolution. On the EU level, the length of Union membership and transaction costs matter most.

Current challenges in EU politics. A perspective from North Rhine-Westphalia. ZEI Discussion Paper C216, 2013

I would like to briefly recapitulate where Europe stands today, and what has been achieved. Because I maintain that in the EU’s 27 Member States we have, despite the failings and shortcomings we all bemoan, reached a level of unity, prosperity and rule of law unheard of in the history of this continent, and possibly of the world. As far as territory is concerned: the European Economic Community started out with six members. The late Bronislaw Geremek, former Foreign Minister of Poland and an eminent historian, used to point out that this, at the time, corresponded in size and shape roughly to the empire of Charlemagne, one of the greatest unified territories the continent has ever known. And yet, a mere 55 years after the Treaty of Rome we have gone far beyond that. Today’s European Union encompasses 27 countries, more than 4 million square kilometers in territory and 500 million people. When it comes to Europe’s policies, at present, all eyes are on the Euro and the future of our common monetary and financial policy. But within our common space, we have achieved so much more than a common currency for a majority of Member States.

Preventing the rise of sovereign borrowing costs in the Eurozone: what can the ESM and the ECB achieve? Egmont Paper No. 56, November 2012

This paper focuses on the possible instruments for ‘ex-ante’/’preventive’/’precautionary’ interventions which can be deployed by the ESM and the ECB in order to prevent a debt crisis in a eurozone country. The potential of Eurobonds will also be discussed in this crisis management perspective. The first part of this paper traces the underlying trends of the evolution of interest rates in eurozone countries over the last decades. The second part discusses the principles of a preventive intervention in sovereign bond markets for the purpose of lowering borrowing costs of countries facing refinancing constraints; the limits and main issues of an ex-ante intervention will be underlined. In the third part, the properties of the ESM’s precautionary financial assistance and secondary market support facility will be discussed in details. The ECB preemptive intervention policies and, in particular, the OMT will be analyzed in the fourth part of the paper. The most likely course of action – a combined intervention by the ESM and the ECB – will be discussed in the fifth part. Finally, I will point out the core challenges of introducing Eurobonds as additional instruments to mitigate the rise of borrowing costs in the short term.

The austerity debate is beside the point for Europe. CEPS Commentary, 8 May 2013

In surveying the heated debate in the eurozone about austerity and the cost of high public debt, this CEPS Commentary suggests that the influential paper by Carmen Reinhard and Kenneth Rogoff misses the key point that public debt owed to foreigners is different from debt owed to residents.

The European Union and the United States, before the election: a much deeper mutual understanding. Jean Monnet/Robert Schuman Paper Series Vol. 12 Special, October 2012

From the Introduction. Governor Romney’s statement that President Obama was trying to convert the United States into a European state actually served to point out the need for a much deeper understanding of both entities to make considerable progress in the future. The need for a close alliance is taken for granted. However, the link is riddled with confusion and stereotypes. This relationship is considered a normal fact forged by mutual historical legacies. Hence the frequent signs of awkward behaviour and misunderstandings under the cover of the notion that potential damage will be corrected by the force of the special relationship. If conflicts are detected, both parties are said to be condemned to agree. If a lack of knowledge is detected, it will be modified by accessible means. Mechanisms for an understanding and cooperation are within reach. Therefore, an effective relationship is not utopian. However, there are areas in which much work is needed to strengthen the alliance and correct its shortcomings. There is a need, not only for agreements in economic and political issues, but also for a deeper understanding of the essence of both entities.