Digital signal processing

Signal Processing (SP) is a subject of central importance in engineering and the applied sciences. Signals are information-bearing functions, and SP deals with the analysis and processing of signals (by dedicated systems) to extract or modify information. Signal processing is necessary because signals normally contain information that is not readily usable or understandable, or which might be disturbed by unwanted sources such as noise. Although many signals are non-electrical, it is common to convert them into electrical signals for processing. Most natural signals (such as acoustic and biomedical signals) are continuous functions of time, with these signals being referred to as analog signals. Prior to the onset of digital computers, Analog Signal Processing (ASP) and analog systems were the only tool to deal with analog signals. Although ASP and analog systems are still widely used, Digital Signal Processing (DSP) and digital systems are attracting more attention, due in large part to the significant advantages of digital systems over the analog counterparts. These advantages include superiority in performance,s peed, reliability, efficiency of storage, size and cost. In addition, DSP can solve problems that cannot be solved using ASP, like the spectral analysis of multicomonent signals, adaptive filtering, and operations at very low frequencies. Following the recent developments in engineering which occurred in the 1980's and 1990's, DSP became one of the world's fastest growing industries. Since that time DSP has not only impacted on traditional areas of electrical engineering, but has had far reaching effects on other domains that deal with information such as economics, meteorology, seismology, bioengineering, oceanology, communications, astronomy, radar engineering, control engineering and various other applications. This book is based on the Lecture Notes of Associate Professor Zahir M. Hussain at RMIT University (Melbourne, 2001-2009), the research of Dr. Amin Z. Sadik (at QUT & RMIT, 2005-2008), and the Note of Professor Peter O'Shea at Queensland University of Technology. Part I of the book addresses the representation of analog and digital signals and systems in the time domain and in the frequency domain. The core topics covered are convolution, transforms (Fourier, Laplace, Z. Discrete-time Fourier, and Discrete Fourier), filters, and random signal analysis. There is also a treatment of some important applications of DSP, including signal detection in noise, radar range estimation, banking and financial applications, and audio effects production. Design and implementation of digital systems (such as integrators, differentiators, resonators and oscillators are also considered, along with the design of conventional digital filters. Part I is suitable for an elementary course in DSP. Part II (which is suitable for an advanced signal processing course), considers selected signal processing systems and techniques. Core topics covered are the Hilbert transformer, binary signal transmission, phase-locked loops, sigma-delta modulation, noise shaping, quantization, adaptive filters, and non-stationary signal analysis. Part III presents some selected advanced DSP topics. We hope that this book will contribute to the advancement of engineering education and that it will serve as a general reference book on digital signal processing.

Vulnerability assessment of reinforced concrete columns subjected to vehicular impacts

Columns are one of the key load bearing elements that are highly susceptible to vehicle impacts. The resulting severe damages to columns may leads to failures of the supporting structure that are catastrophic in nature. However, the columns in existing structures are seldom designed for impact due to inadequacies of design guidelines. The impact behaviour of columns designed for gravity loads and actions other than impact is, therefore, of an interest. A comprehensive investigation is conducted on reinforced concrete column with a particular focus on investigating the vulnerability of the exposed columns and to implement mitigation techniques under low to medium velocity car and truck impacts. The investigation is based on non-linear explicit computer simulations of impacted columns followed by a comprehensive validation process. The impact is simulated using force pulses generated from full scale vehicle impact tests. A material model capable of simulating triaxial loading conditions is used in the analyses. Circular columns adequate in capacity for five to twenty story buildings, designed according to Australian standards are considered in the investigation. The crucial parameters associated with the routine column designs and the different load combinations applied at the serviceability stage on the typical columns are considered in detail. Axially loaded columns are examined at the initial stage and the investigation is extended to analyse the impact behaviour under single axis bending and biaxial bending. The impact capacity reduction under varying axial loads is also investigated. Effects of the various load combinations are quantified and residual capacity of the impacted columns based on the status of the damage and mitigation techniques are also presented. In addition, the contribution of the individual parameter to the failure load is scrutinized and analytical equations are developed to identify the critical impulses in terms of the geometrical and material properties of the impacted column. In particular, an innovative technique was developed and introduced to improve the accuracy of the equations where the other techniques are failed due to the shape of the error distribution. Above all, the equations can be used to quantify the critical impulse for three consecutive points (load combinations) located on the interaction diagram for one particular column. Consequently, linear interpolation can be used to quantify the critical impulse for the loading points that are located in-between on the interaction diagram. Having provided a known force and impulse pair for an average impact duration, this method can be extended to assess the vulnerability of columns for a general vehicle population based on an analytical method that can be used to quantify the critical peak forces under different impact durations. Therefore the contribution of this research is not only limited to produce simplified yet rational design guidelines and equations, but also provides a comprehensive solution to quantify the impact capacity while delivering new insight to the scientific community for dealing with impacts.

An examination of the relationships between lifestyle factors and mental health among Australian midlife and older women

Background It is well known that lifestyle factors including overweight/obesity, physical inactivity, smoking and alcohol use are largely related with morbidity and mortality of chronic diseases including diabetes and cardiovascular diseases. The effect of lifestyle factors on people’s mental health who have a chronic disease is less defined in the research. The World Health Organisation has defined health as “a state of complete physical, mental and social well-being”. It is important, therefore to develop an understanding of the relationships between lifestyle and mental health as this may have implications for maximising the efficacy of health promotion in people with chronic diseases. Objectives The overall aim of the research was to examine the relationships between lifestyle factors and mental health among Australian midlife and older women. Methodology The current research measured four lifestyle factors including weight status, physical activity, smoking and alcohol use. Three interconnecting studies were undertaken to develop a comprehensive understanding of the relationships between lifestyle factors and mental health. Study 1 investigated the longitudinal effect of lifestyle factors on mental health by using midlife and older women randomly selected from the community. Study 2 adopted a cross-sectional design, and compared the effect of lifestyle factors on mental health between midlife and older women with and without diabetes. Study 3 examined the mediating effect of self-efficacy in the relationships between lifestyle factors and mental health among midlife and older women with diabetes. A questionnaire survey was chosen as the means to gather information, and multiple linear regression analysis was conducted as the primary statistical approach. Results The research showed that the four lifestyle factors including weight status, physical activity, smoking and alcohol use did impact on mental health among Australian midlife and older women. First, women with a higher BMI had lower levels of mental health than women with normal weight, but as women age, the mental health of women who were overweight and obese becomes better than that of women with normal weight. Second, women who were physically active had higher levels of mental health than those who were not. Third, smoking adversely impacted on women’s mental health. Finally, those who were past-drinkers had less anxiety symptoms than women who were non-drinkers as they age. Women with diabetes appeared to have lower levels of mental health compared to women without. However, the disparities of mental health between two groups were confounded by low levels of physical activity and co-morbidities. This finding underlines the effect of physical activity on women’s mental health, and highlights the potential of reducing the gap of mental health by promoting physical activity. In addition, self-efficacy was shown to be the mediator of the relationships between BMI, physical activity and depression, suggesting that enhancing people’s self-efficacy may be useful for mental health improvement. Conclusions In conclusion, Australian midlife and older women who live with a healthier lifestyle have higher levels of mental health. It is suggested that strategies aiming to improve people’s mental health may be more effective if they focus on enhancing people’s self-efficacy levels. This study has implications to both health education and policy development. It indicates that health professionals may need to consider clients’ mental health as an integrated part of lifestyle changing process. Furthermore, given that lifestyle factors impact on both physical and mental health, lifestyle modification should continue to be the focus of policy development.

The WIL (Work Integrated Learning) report : a national scoping study [Final Report]

This report provides an account of the first large-scale scoping study of work integrated learning (WIL) in contemporary Australian higher education. The explicit aim of the project was to identify issues and map a broad and growing picture of WIL across Australia and to identify ways of improving the student learning experience in relation to WIL. The project was undertaken in response to high levels of interest in WIL, which is seen by universities both as a valid pedagogy and as a means to respond to demands by employers for work-ready graduates, and demands by students for employable knowledge and skills. Over a period of eight months of rapid data collection, 35 universities and almost 600 participants contributed to the project. Participants consistently reported the positive benefits of WIL and provided evidence of commitment and innovative practice in relation to enhancing student learning experiences. Participants provided evidence of strong partnerships between stakeholders and highlighted the importance of these relationships in facilitating effective learning outcomes for students. They also identified a range of issues and challenges that face the sector in growing WIL opportunities; these issues and challenges will shape the quality of WIL experiences. While the majority of comments focused on issues involved in ensuring quality placements, it was recognised that placements are just one way to ensure the integration of work with learning. Also, the WIL experience is highly contextualised and impacted by the expectations of students, employers, the professions, the university and government policy.

Occurrence of iron and associated bacterial populations in soils of a forested subtropical coastal catchment

Iron (Fe) biogeochemistry is potentially of environmental significance in plantation-forested, subtropical coastal ecosystems where soil disturbance and seasonal water logging may lead to elevation of Fe mobilization and associated water quality deterioration. Using wet-chemical extraction and laboratory cultivation, we examined the occurrence of Fe forms and associated bacterial populations in diverse soils of a representative subtropical Australian coastal catchment (Poona Creek). Total reactive Fe was abundant throughout 0e30 cm soil cores, consisting primarily of crystalline forms in well-drained sand soils and water-logged loam soils, whereas in water-logged, low clay soils, over half of total reactive Fe was present in poorly-crystalline forms due to organic and inorganic complexation, respectively. Forestry practices such as plantation clear-felling and replanting, seasonal water logging and mineral soil properties significantly impacted soil organic carbon (C), potentially-bioavailable Fe pools and densities of S-, but not Fe-, bacterial populations. Bacterial Fe(III) reduction and abiotic Fe(II) oxidation, as well as chemolithotrophic S oxidation and aerobic, heterotrophic respiration were integral to catchment terrestrial FeeC cycling. This work demonstrates bacterial involvement in terrestrial Fe cycling in a subtropical coastal circumneutral-pH ecosystem.

Is the contemporary era behind us?

The advent of new technologies, like personal computers and networking platforms, represents a series of events that have impacted on society as a whole as well as challenging the artworld to reconsider what is 'contemporary'.

Improving information security management in nonprofit organisations

All organisations, irrespective of size and type, need effective information security management (ISM) practices to protect vital organisational in- formation assets. However, little is known about the information security management practices of nonprofit organisations. Australian nonprofit organisations (NPOs) employed 889,900 people, managed 4.6 million volunteers and contributed $40,959 million to the economy during 2006-2007 (Australian Bureau of Statistics, 2009). This thesis describes the perceptions of information security management in two Australian NPOs and examines the appropriateness of the ISO 27002 information security management standard in an NPO context. The overall approach to the research is interpretive. A collective case study has been performed, consisting of two instrumental case studies with the researcher being embedded within two NPOs for extended periods of time. Data gathering and analysis was informed by grounded theory and action research, and the Technology Acceptance Model was utilised as a lens to explore the findings and provide limited generalisability to other contexts. The major findings include a distinct lack of information security management best practice in both organisations. ISM Governance and risk management was lacking and ISM policy was either outdated or non- existent. While some user focused ISM practices were evident, reference to standards, such as ISO 27002, were absent. The main factor that negatively impacted on ISM practices was the lack of resources available for ISM in the NPOs studied. Two novel aspects of information security dis- covered in this research were the importance of accuracy and consistency of information. The contribution of this research is a preliminary understanding of ISM practices and perceptions in NPOs. Recommendations for a new approach to managing information security management in nonprofit organisations have been proposed.

Interactive peer-based learning in a comparative case study : what do students gain?

As English increasingly becomes one of the most commonly spoken languages in the world today for a variety of economic, social and cultural reasons, education is impacted by globalisation, the internationalisation of universities and the diversity of learners in classrooms. The challenge for educators is to find more effective ways of teaching English language so that students are better able to create meaning and communicate in the target language as well as to transform knowledge and understanding into relevant skills for a rapidly changing world. This research focuses broadly on English language education underpinned by social constructivist principles informing communicative language teaching and in particular, interactive peer learning approaches. An intervention of interactive peer-based learning in two case study contexts of English as Foreign Language (EFL) undergraduates in a Turkish university and English as Second Language (ESL) undergraduates in an Australian university investigates what students gain from the intervention. Methodology utilising qualitative data gathered from student reflective logs, focus group interviews and researcher field notes emphasises student voice. The cross case comparative study indicates that interactive peer-based learning enhances a range of learning outcomes for both cohorts including engagement, communicative competence, diagnostic feedback as well as assisting development of inclusive social relationships, civic skills, confidence and self efficacy. The learning outcomes facilitate better adaptation to a new learning environment and culture. An iterative instructional matrix tool is a useful product of the research for first year university experiences, teacher training, raising awareness of diversity, building learning communities, and differentiating the curriculum. The study demonstrates that English language learners can experience positive impact through peer-based learning and thus holds an influential key for Australian universities and higher education.

Acetabular impaction grafting in total hip replacement

Background and purpose: Acetabular impaction grafting has been shown to have excellent results, but concerns regarding its suitability for larger defects have been highlighted. We report the use of this technique in a large cohort of patients with the aim of better understanding the limitations of the technique. Methods: We investigated a consecutive group of 339 cases of impaction grafting of the cup with morcellised impacted allograft bone for survivorship and mechanisms for early failure. Results: Kaplan Meier survival was 89.1% (95% CI 83.2 to 95.0%) at 5.8 years for revision for any reason, and 91.6% (95% CI 85.9 to 97.3%) for revision for aseptic loosening of the cup. Of the 15 cases revised for aseptic cup loosening, nine were large rim mesh reconstructions, two were fractured Kerboull-Postel plates, two were migrating cages, one medial wall mesh failure and one impaction alone failed. Interpretation: In our series, results were disappointing where a large rim mesh or significant reconstruction was required. In light of these results, our technique has changed in that we now use predominantly larger chips of purely cancellous bone, 8-10 mm3 in size, to fill the cavity and larger diameter cups to better fill the mouth of the reconstructed acetabulum. In addition we now make greater use of i) implants made of a highly porous in-growth surface to constrain allograft chips and ii) bulk allografts combined with cages and morcellised chips in cases with very large segmental and cavitary defects.

Year 7 students’ approaches to understanding and solving NAPLAN numeracy problems

This study investigated how the interpretation of mathematical problems by Year 7 students impacted on their ability to demonstrate what they can do in NAPLAN numeracy testing. In the study, mathematics is viewed as a culturally and socially determined system of signs and signifiers that establish the meaning, origins and importance of mathematics. The study hypothesises that students are unable to succeed in NAPLAN numeracy tests because they cannot interpret the questions, even though they may be able to perform the necessary calculations. To investigate this, the study applied contemporary theories of literacy to the context of mathematical problem solving. A case study design with multiple methods was used. The study used a correlation design to explore the connections between NAPLAN literacy and numeracy outcomes of 198 Year 7 students in a Queensland school. Additionally, qualitative methods provided a rich description of the effect of the various forms of NAPLAN numeracy questions on the success of ten Year 7 students in the same school. The study argues that there is a quantitative link between reading and numeracy. It illustrates that interpretation (literacy) errors are the most common error type in the selected NAPLAN questions, made by students of all abilities. In contrast, conceptual (mathematical) errors are less frequent amongst more capable students. This has important implications in preparing students for NAPLAN numeracy tests. The study concluded by recommending that increased focus on the literacies of mathematics would be effective in improving NAPLAN results.

David F. Treagust : congenial soul, science educator, and international research leader

For almost a half century David F. Treafust has been an exemplary science educator who has contributed through his dedication and commitments to students, curriculum development and collaboration with teachers, and cutting edge research in science education that has impacted the field globally, nationally and locally. A hallmark of his outstanding career is his collaborative style that inspires others to produce their best work.

Defences in medical negligence : to what extent has tort law reform in Australia limited the liability of health professionals?

Tort law reform has resulted in legislation being passed by all Australian jurisdictions in the past decade implementing the recommendations contained in the Ipp Report. The report was in response to a perceived crisis in medical indemnity insurance. The objective was to restrict and limit liability in negligence actions. This paper will consider to what extent the reforms have impacted on the liability of health professionals in medical negligence actions. The reversal of the onus of proof through the obvious risk sections has attempted to extend the scope of the defence of voluntary assumption of risk. There is no liability for the materialisation of an inherent risk. Presumptions and mandatory reductions for contributory negligence have attempted to reduce the liability of defendants. It is now possible for reductions of 100% for contributory negligence. Apologies can be made with no admission of legal liability to encourage them being made and thereby reduce the number of actions being commenced. The peer acceptance defence has been introduced and enacted by legislation. There is protection for good samaritans even though the Ipp Report recommended against such protection. Limitation periods have been amended. Provisions relating to mental harm have been introduced re-instating the requirement of normal fortitude and direct perception. After an analysis of the legislation, it will be argued in this paper that while there has been some limitation and restriction, courts have generally interpreted the civil liability reforms in compliance with the common law. It has been the impact of statutory limits on the assessment of damages which has limited the liability of health professionals in medical negligence actions.

Sustaining and improving the social condition of river ecosystems

This study uses and extends the theory of planned behavior to develop and empirically test a model of the social condition of riparian behavior. The theory of planned behavior is applicable to understanding the complexity of social conditions underlying waterway health. SEM identified complex interrelationships between variables. Aspects of respondent’s beliefs impacted on their stated intentions and behavior and were partially mediated by perceived behavioral control. The way in which people used waterways also influenced their actions. This study adds to theoretical knowledge through the development of scales that measure aspects of the social condition of waterways and examines their interrelationships for the first time. It extends the theory of planned behaviour through the incorporation of an objective measure of participants knowledge of waterway health. It also has practical implications for managers involved in sustaining and improving the social condition of river ecosystems.

Indigenous studies in all schools

Cherbourg State School is approximately 300 km northwest of Brisbane. It is situated in an Aboriginal community at Cherbourg with approximately 250 students. At the Cherbourg State School, the aim was to generate good academic outcomes for all students from kindergarten to Year 7 and to nurture a strong and positive sense of what it means to be Aboriginal in today's society. In this paper, I will discuss modernism and postmodernism in indigenous studies and how this has impacted on the design and development of the Indigenous Studies Programme at the Cherbourg State School. The programme was designed to provide students with the opportunity to learn about the history of Indigenous people from Indigenous voices and provide an understanding of the impact of invasion and the consequences on the lives of Indigenous people, in the past and present. The stories from the elders and members of their own community provided knowledge that allowed students to challenge Aboriginal identity by taking on existing perceptions so that they could be better processed and understood.

Improving patient privacy and confidentiality in one regional Emergency Department – a quality project

Background: Patient privacy and confidentiality (PPaC) is an important consideration for nurses and other members of the health care team. Can a patient expect to have confidentiality and in particular privacy in the current climate of emergency health care? Do staff who work in the Emergency Department (ED) see confidentiality as an important factor when providing emergency care? These questions are important to consider. Methods: This is a two phased quality improvement project, developed and implemented over a six month period in a busy regional, tertiary referral ED. Results: Issues identified for this department included department design and layout, overcrowding due to patient flow and access block, staff practices and department policies which were also impacted upon by culture of the team, and use of space. Conclusions: Changes successful in improving this issue include increased staff awareness about PPaC, intercom paging prior to nursing handover to remove visitors during handover, one visitor per patient policy, designated places for handover, allocated bed space for patient reviews/assessment and a strategy to temporarily move the patient if procedures would have been undertaken in shared bed space. These are important issues when considering policy, practice and department design in the ED.