A Suzaku view of IGR J16393-4643

The pulsar IGR J16393-4643 belongs to a class of highly absorbed supergiant high-mass X-ray binaries (HMXBs), characterized by a very high column density of absorbing matter. We present the results of simultaneous broad-band pulsation and spectrum analysis from a 44-ks Suzaku observation of the source. The orbital intensity profile created with the Swift Burst Alert Telescope (Swift-BAT) light curve shows an indication of IGR J16393-4643 being an eclipsing system with a short eclipse semi-angle theta(E) similar to 17 degrees. For a supergiant companion star with a 20-R-circle dot radius, this implies an inclination of the orbital plane in the range 39 degrees-57 degrees, whereas for a main-sequence B star as the companion with a 10-R-circle dot radius, the inclination of the orbital plane is in the range 60 degrees-77 degrees. Pulse profiles created for different energy bands have complex morphology, which shows some energy dependence and increases in pulse fraction with energy. We have also investigated broad-band spectral characteristics, phase-averaged spectra and resolving the pulse phase into peak and trough phases. The phase-averaged spectrum has a very high N-H(similar to 3 x 10(23) cm(-2)) and is described by a power law (Gamma similar to 0.9) with a high-energy cut-off above 20 keV. We find a change in the spectral index in the peak and trough phases, implying an underlying change in the source spectrum.

Small signal Nonquasi-Static Model for Common Double-Gate MOSFETs Adapted to Gate Oxide Thickness Asymmetry

We present a physics-based closed form small signal Nonquasi-static (NQS) model for a long channel Common Double Gate MOSFET (CDG) by taking into account the asymmetry that may prevail between the gate oxide thickness. We use the unique quasi-linear relationship between the surface potentials along the channel to solve the governing continuity equation (CE) in order to develop the analytical expressions for the Y parameters. The Bessel function based solution of the CE is simplified in form of polynomials so that it could be easily implemented in any circuit simulator. The model shows good agreement with the TCAD simulation at-least till 4 times of the cut-off frequency for different device geometries and bias conditions.

Electromagnetic analysis of novel class of multiple core/multiple clad step index single mode optical fiber by analytical means

General propagation properties and universal curves are given for double clad single mode fibers with inner cladding index higher or lower than the outer cladding index, using the parameter: inner cladding/core radii ratio. Mode cut-off conditions are also examined for the cases. It is shown that dispersion properties largely differ from the single clad single mode fiber case, leading to large new possibilities for extension of single mode operation for large wavelength tange. Paper demonstrates that how substantially we can extend the single mode operation range by using the raised inner cladding fiber. Throughout we have applied our own computations technique to find out the eigenvalue for a given modes. Detail derivations with all trivial mathematics for eigenmode equation are derived for each case. Paper also demonstrates that there is not much use of using depressed inner cladding fiber. We have also concluded that using the large inner cladding/inner core radius we can significantly increase the single mode operation range for the large wavelength region. (C) 2015 Elsevier GmbH. All rights reserved.

An analysis of subgrid-resolved scale interactions with use of results from direct numerical simulations

Subgrid nonlinear interaction and energy transfer are analyzed using direct numerical simulations of isotropic turbulence. Influences of cutoff wave number at different ranges of scale on the energetics and dynamics have been investigated. It is observed that subgrid-subgrid interaction dominates the turbulent dynamics when cut-off wave number locates in the energy-containing range while resolved-subgrid interaction dominates if it is in the dissipation range; By decomposing the subgrid energy transfer and nonlinear interaction into 'forward' and 'backward' groups according to the sign of triadic interaction, we find that individually each group has very large contribution, but the net of them is much smaller, implying that tremendous cancellation happens between these two groups.

InAs0.3Sb0.7 films grown on (100) GaSb substrates with a buffer layer by liquid-phase epitaxy

The growth of InAsxSb1-x films on (100) GaSb substrates by liquid-phase epitaxy (LPE) has been investigated and epitaxial InAs0.3Sb0.7 films with InAs0.9Sb0.09 buffer layers have been successfully obtained. The low X-ray rocking curve FHWM values of InAs0.3Sb0.7 layer shows the high quality of crystal-orientation structure. Hall measurements show that the highest electron mobility in the samples obtained is 2.9 x 10(4) cm(2) V-1 s(-1) and the carrier density is 2.78 x 10(16)cm(-3) at room temperature (RT). The In As0.3Sb0.7 films grown on (10 0) GaSb substrates exhibit excellent optical performance with a cut-off wavelength of 12 mu m. (c) 2007 Elsevier B.V. All rights reserved.

Elimination of loading reverberation in the split hopkinson torsional bar

The loading reverberation is a multiple wave effect on the specimen in the split Hopkinson torsional bar (SHTB). Its existence intensively destroys the microstructure pattern in the tested material and therefore, interferes with the study correlating the deformed microstructure to the macroscopic stress-strain response. This paper discusses the problem of the loading reverberation and its effects on the post-mortem observations in the SHTB experiment. The cause of the loading reverberation is illustrated by a stress wave analysis. The modification of the standard SHTB is introduced, which involves attaching two unloading bars at the two ends of the original main bar system and adopting a new loading head and a couple of specially designed clutches. The clutches are placed between the main bar system and the unloading bars in order to lead the secondary loading wave out of the main bar system and to cut off the connection in a timely manner. The loading head of the standard torsional bar was redesigned by using a tube-type loading device associated with a ratchet system to ensure the exclusion of the reflected wave. Thus, the secondary loading waves were wholly trapped in the two unloading bars. The wave recording results and the contrasting experiments for examining the post-mortem microstructure during shear banding both before and after the modification highly support the effectiveness of the modified version. The modified SHTB realizes a single wave pulse loading process and will become a useful tool for investigating the relation between the deformed microstructure and the macroscopic stress-strain response. It will play an important role especially in the study of the evolution of the microstructure during the shear banding process. (C) 1995 American Institute of Physics.

Fiabilidad de diferentes pruebas que se utilizan para evaluar el riesgo de lesión del miembro inferior en mujeres deportistas

233 p. : il. + anexo (247 p.)

Detection of hepatitis B virus markers using a biosensor based on imaging ellipsometry

A biosensor based on imaging ellipsometry (BIE) has been developed and validated in 169 patients for detecting five markers of hepatitis B virus (HBV) infection. The methodology has been established to pave the way for clinical diagnosis, including ligand screening, determination of the sensitivity, set-up of cut-off values (CoVs) and comparison with other clinical methods. A matrix assay method was established for ligand screening. The CoVs of HBV markers were derived with the help of receiver operating characteristic curves. Enzyme-linked immunosorbent assay (ELISA) was the reference method. Ligands with high bioactivity were selected and sensitivities of 1 ng/mL and 1 IU/mL for hepatitis B surface antigen (HBsAg) and surface antibody (anti-HBs) were obtained respectively. The CoVs of HBsAg, anti-HBs, hepatitis B e antigen, hepatitis B e antibody and core antibody were as follows: 15%, 18%, 15%, 20% and 15%, respectively, which were the percentages over the values of corresponding ligand controls. BIE can simultaneously detect up to five markers within 1 h with results in acceptable agreement with ELISA, and thus shows a potential for diagnosing hepatitis B with high throughput.

I. Singular perturbation problems involving singular points and turning points. II. On the averaged Lagrangian technique for nonlinear dispersive waves

In Part I a class of linear boundary value problems is considered which is a simple model of boundary layer theory. The effect of zeros and singularities of the coefficients of the equations at the point where the boundary layer occurs is considered. The usual boundary layer techniques are still applicable in some cases and are used to derive uniform asymptotic expansions. In other cases it is shown that the inner and outer expansions do not overlap due to the presence of a turning point outside the boundary layer. The region near the turning point is described by a two-variable expansion. In these cases a related initial value problem is solved and then used to show formally that for the boundary value problem either a solution exists, except for a discrete set of eigenvalues, whose asymptotic behaviour is found, or the solution is non-unique. A proof is given of the validity of the two-variable expansion; in a special case this proof also demonstrates the validity of the inner and outer expansions.

Nonlinear dispersive wave equations which are governed by variational principles are considered in Part II. It is shown that the averaged Lagrangian variational principle is in fact exact. This result is used to construct perturbation schemes to enable higher order terms in the equations for the slowly varying quantities to be calculated. A simple scheme applicable to linear or near-linear equations is first derived. The specific form of the first order correction terms is derived for several examples. The stability of constant solutions to these equations is considered and it is shown that the correction terms lead to the instability cut-off found by Benjamin. A general stability criterion is given which explicitly demonstrates the conditions under which this cut-off occurs. The corrected set of equations are nonlinear dispersive equations and their stationary solutions are investigated. A more sophisticated scheme is developed for fully nonlinear equations by using an extension of the Hamiltonian formalism recently introduced by Whitham. Finally the averaged Lagrangian technique is extended to treat slowly varying multiply-periodic solutions. The adiabatic invariants for a separable mechanical system are derived by this method.

Single attosecond pulse generation using two-color polarized time-gating technique

It is proposed that single attosecond pulses be generated via high-order harmonic generation by using a two-color pump pulse with time dependent ellipticity. The two-color pump pulse is created by the fundamental field and its second harmonic: the fundamental field is left-circularly polarized and the second harmonic is right-circularly polarized. Numerical simulations show that single attosecond pulses can be produced in the cut-off region by using the synthesis of 20 fs left-hand and right-hand circularly polarized pulses with a pulse delay of 20 fs. The attosecond pulses produced this way are much stronger than that produced by a few-cycle linear polarized pulse of comparable intensity. (c) 2005 Optical Society of America

The smelt Osmerus eperlanus in Scotland

Smelt populations have been recorded since the 18th Century from at least 15 rivers in Scotland, but over the last Century the species has suffered a severe decline and has disappeared from all its former sites except the rivers Cree, Forth and Tay. These populations must now be regarded as having high conservation importance. There are probably several different reasons for this decline. In some rivers, such as the Clyde and the Stinchar, pollution in the lower reaches has prevented successful migration and reproduction. In other rivers, high weirs and barriers have completely cut off access to spawning grounds. In some estuaries and rivers, such as the Solway Firth, overfishing is believed to have been responsible for eliminating local stocks. A Species Action Plan for the smelt has been prepared and it is hoped that this will be the basis of a future conservation strategy for this species in Scotland.

Avaliação nutricional do paciente com doença hepática crônica

Além de muito freqüente, a desnutrição associa-se a morbi/mortalidade em pacientes com doenças hepáticas crônicas. A avaliação do estado nutricional em hepatopatas é difícil pela sobrecarga hídrica e pela alteração na síntese protéica, fatores que alteram os parâmetros tradicionalmente usados na avaliação nutricional. Os objetivos são:a)avaliar o estado nutricional, através da AGS, antropometria, do escore de Mendenhall e da combinação de todos os instrumentos, em pacientes com doença hepática crônica; b)correlacionar o estado nutricional com a gravidade de doença hepática crônica; c)determinar a contribuição da dinamometria do aperto de mão para a avaliação do estado nutricional. Foram incluídos 305 pacientes portadores de doenças hepáticas crônicas, com idade de 18-80 anos, atendidos no ambulatório de doenças hepatobiliares do Hospital Universitátio Pedro Ernesto. A gravidade da doença hepática foi avaliada pela classificação de Child-Pugh e escore de Meld. Foram aferidos parâmetros antropométricos (peso, altura, índice de massa corporal, prega cutânea triciptal, circunferência do braço, circunferência muscular do braço), parâmetros bioquímicos (albumina e contagem total de linfócitos), Avaliação Global Subjetiva, escore de Mendenhall e força do aperto de mão pela dinamometria. Os valores da porcentagem de adequação dos parâmetros foram utilizados para a classificação da desnutrição. Consideramos todos os pacientes com porcentagens de adequação abaixo de 90% como desnutridos. Foi criado o escore risco de desnutrição que se caracterizou pela alteração em qualquer um dos parâmetros da avaliação nutricional. Cerca de 53% dos pacientes eram do sexo masculino, 43% portadores de cirrose hepática, 80% com etiologia viral e média de idade de 54 12 anos. Houve relação estatisticamente significativa entre a classificação funcional da doença hepática e a AGS, o escore de Mendenhall e o de risco de desnutrição. A avaliação isolada da antropometria não se correlacionou com a classificação funcional. Segundo a AGS, a prevalência de desnutrição foi de 10% na hepatopatia não cirrótica, 16% na cirrose compensada e 94% na cirrose descompensada. Segundo o escore de Mendenhall, as cifras foram de 31%, 38% e 56%, respectivamente. Segundo o novo escore, as cifras foram de 52%, 60% e 96%, respectivamente. Embora tenha havido uma redução estatisticamente significativa da força muscular com o agravamento do estado nutricional, não foi possível estabelecer um ponto de corte para os valores da dinamometria. A análise do desempenho do percentual de adequação da força muscular como critério diagnóstico de pacientes sob risco de desnutrição revelou provavelmente 56% de falso-positivos e 24% de falso-negativos. A grande variação na prevalência de desnutrição em pacientes com doença hepática depende do instrumento de avaliação nutricional usado e da classificação funcional da doença hepática. Não surpreendentemente, os escores combinados detectaram as maiores taxas de prevalência de desnutrição. Houve associação significativa entre o estado nutricional e a gravidade da doença hepática. O aumento das taxas de prevalência de desnutrição trazido pela dinamometria ocorreu às custas de resultados falso-positivos.

A single-layer magnetic atom chip for trapping an array of Bose-Einstein condensate

We propose a simple single-layer magnetic microtrap configuration which can trap an array of magnetically-trapped Bose-Einstein condensate. The configuration consists of two series of parallel wires perpendicular to each other and all of the crossing points are cut off for maintaining the uniformity of the current. We analyse the trapping potential, the position of trapping centres and the uniformity of the array of the traps. The trapping depth and trapping frequency with different parameters are also calculated. Lastly, the effect of the cut-off crossing points, dissipate power, chip production are introduced concisely.

Reprodutibilidade de um índice para diagnóstico e avaliação da atividade de lesões de cárie dentária na dentição decídua

O objetivo do presente estudo clínico é verificar a reprodutibilidade intra e interexaminadores de um critério de diagnóstico de cárie dentária (Nyvad et al. 1999) aplicado na dentição decídua, e avaliar o tempo médio necessário para a realização do exame clínico utilizando o referido critério. O mesmo é baseado na combinação de métodos visuais e táteis e propõe a diferenciação entre lesões ativas e inativas, tanto para lesões cavitadas quanto para não cavitadas. A amostra total consistiu de 80 crianças de três a sete anos de idade, de ambos os sexos, estudantes do Centro Educacional Terra Santa (Petrópolis/ RJ). Os responsáveis assinaram um termo de consentimento livre e esclarecido e o trabalho foi aprovado pelo Comitê de Ética em Pesquisa do HUPE-UERJ. Os exames foram realizados após escovação supervisionada, em consultório odontológico sob iluminação artificial, após 3-5s de secagem com ar comprimido, por dois examinadores treinados pelas autoras do índice e calibrados. As concordâncias intra e interexaminadores foram avaliadas pelo percentual de concordância (%) e pelo teste kappa (k), considerando a superfície dentária como unidade de análise e os seguintes pontos de corte: 1) hígida versus cariada; 2) ativa versus inativa; 3) descontinuidade versus hígida; e 4) cavitada versus hígida. O % e o valor de k para confiabilidade interexaminadores para cada ponto de corte foram: 1) % = 0,97 e k = 0,82 (IC: 0,80 - 0,85); 2) % = 0,98 e k = 0,80 (IC: 0,76 - 0,83); 3) % = 0,99 e k = 0,90 (IC: 0,88 - 0,93); 4) % = 99,0 e k = 0,95 (IC: 0,92 - 0,97). O % e o valor de k para confiabilidade intraexaminador para cada ponto de corte foram: 1) % = 0,98 e k = 0,86 (IC: 0,84 - 0,86); 2) % = 0,99 e k = 0,86 (IC: 0,83 - 0,89); 3) % = 0,99 e k = 0,94 (IC: 0,92 - 0,96); 4) % = 0,99 e k = 0,98 (IC: 0,96 - 0,99). O maior % de discordância (65,3% - 158/242) concentrou-se na diferenciação entre supefícies hígidas e lesões não cavitadas: 33,5% (81/242) entre superfície hígida e lesão não cavitada inativa; 26,0% (63/242), entre superfície hígida e lesão não cavitada ativa; e 5,8% (14/242), entre lesão não cavitada ativa e lesão não cavitada inativa. O tempo necessário para realização do exame clínico foi em média 226,5s (128,53). Conclui-se que o índice apresentou reprodutibilidade variando de substancial à quase perfeita e um tempo de exame viável, mostrando-se consistente e reproduzível para a realização de estudos clínicos de cárie dentária na dentição decídua.

Micromechanical damage and fracture in elastomeric polymers

This thesis aims at a simple one-parameter macroscopic model of distributed damage and fracture of polymers that is amenable to a straightforward and efficient numerical implementation. The failure model is motivated by post-mortem fractographic observations of void nucleation, growth and coalescence in polyurea stretched to failure, and accounts for the specific fracture energy per unit area attendant to rupture of the material.

Furthermore, it is shown that the macroscopic model can be rigorously derived, in the sense of optimal scaling, from a micromechanical model of chain elasticity and failure regularized by means of fractional strain-gradient elasticity. Optimal scaling laws that supply a link between the single parameter of the macroscopic model, namely the critical energy-release rate of the material, and micromechanical parameters pertaining to the elasticity and strength of the polymer chains, and to the strain-gradient elasticity regularization, are derived. Based on optimal scaling laws, it is shown how the critical energy-release rate of specific materials can be determined from test data. In addition, the scope and fidelity of the model is demonstrated by means of an example of application, namely Taylor-impact experiments of polyurea rods. Hereby, optimal transportation meshfree approximation schemes using maximum-entropy interpolation functions are employed.

Finally, a different crazing model using full derivatives of the deformation gradient and a core cut-off is presented, along with a numerical non-local regularization model. The numerical model takes into account higher-order deformation gradients in a finite element framework. It is shown how the introduction of non-locality into the model stabilizes the effect of strain localization to small volumes in materials undergoing softening. From an investigation of craze formation in the limit of large deformations, convergence studies verifying scaling properties of both local- and non-local energy contributions are presented.