INFO2009 Group 1 -- Open Source Software Licensing Infographic

An infographic for open source software licensing. This resource can serve as a simple introduction to open source software licensing, and as a reference for future use.

INFO2009 resource: Infographic on the evolution of Open Source Software

Infographic providing a timeline of important events in the history of open source software since the fifties. Also includes stats for OSS licenses, usage in Business and reasons for participating in an OSS community.

Dale a tu sistema de GIS propietario una nueva cara con un 'lifting' Open Source

Presentación que muestra una aplicación GIS propietaria de hace 15 años, junto con su nueva cara gracias al software libre. Se cuenta una arquitectura novedosa que incluye el uso del API de MapFish Server para lanzar geo-procesos, junto con el software stack de PostGIS, GeoWebCache y OpenLayers

Unlocking Geographical Information from Academia: an Open Source WebGIS Solution

Los Centros de Investigación de Geografía son por lo general productores de un gran volumen de Información Geográfica (IG), los cuales generan tanto proyectos financiados como iniciativas de investigación individuales. El Centro de Estudos de Geografia e Planeamento Regional (e-GEO) ha estado involucrado en varios proyectos a escala local, regional, nacional e internacional. Recientemente, dos cuestiones fueron objeto de debate. Una de ellas fue el hecho de que la información espacial obtenida a partir del desarrollo de tales proyectos de investigación no ha tenido la visibilidad que se esperaba. En la mayoría de las veces, la IG de estos proyectos no estaba en el formato adecuado para que los investigadores -o incluso el público en general o grupos de interés- pudieran pesquisar fácilmente. La segunda cuestión era sobre cómo hacer que estos resultados pudieran ser accesibles al alcance de todos, en todos los lugares, fácilmente y con los mínimos costes para el Centro, teniendo en cuenta el actual contexto económico portugués y los intereses de e-GEO. Estas dos cuestiones se resuelven con una sola respuesta: la puesta en marcha de un WebGIS en una plataforma Open Source. En este trabajo se ilustra la producción de un instrumento para la difusión de las indicaciones geográficas en el World Wide Web, utilizando únicamente software libre y freeware. Esta herramienta permite a todos los investigadores del Centro publicar su IG, la cual aparece como plenamente accesible a cualquier usuario final. Potencialmente, el hecho de permitir que este tipo de información sea plenamente accesible debería generar un gran impacto, acortando las distancias entre el trabajo realizado por los académicos y el usuario final. Creemos que es una óptima manera para que el público pueda acceder e interpretar la información espacial. En conclusión, esta plataforma debería servir para cerrar la brecha entre productores y usuarios de la información geográfica, permitiendo la interacción entre todas las partes así como la carga de nuevos datos dado un conjunto de normas destinadas a control de calidad

Maturidade de plataformas SOA Open Source vs proprietários

O bom funcionamento de uma empresa passa pela coordenação dos seus vários elementos, pela fluidez das suas operações diárias, pelo desempenho dos seus recursos, tanto humanos como materiais, e da interacção dos vários sistemas que a compõem. As tecnologias empresariais sentiram um desenvolvimento contínuo após a sua aparição, desde o processo básico, para gestão de processos de negócios (BPM), para plataformas de recursos empresariais (ERP) modernos como o sistema proprietário SAP ou Oracle, para conceitos mais gerais como SOA e cloud, baseados em standards abertos. As novas tecnologias apresentam novos canais de trânsito de informação mais rápidos e eficientes, formas de automatizar e acompanhar processos de negócio e vários tipos de infra-estruturas que podem ser utilizadas de forma a tornar a empresa mais produtiva e flexível. As soluções comerciais existentes permitem realizar estes objectivos mas os seus custos de aquisição podem revelar-se demasiado elevados para algumas empresas ou organizações, que arriscam de não se adaptar às mudanças do negócio. Ao mesmo tempo, software livre está a ganhar popularidade mas existem sempre alguns preconceitos sobre a qualidade e maturidade deste tipo de software. O objectivo deste trabalho é apresentar SOA, os principais produtos SOA comerciais e open source e realizar uma comparação entre as duas categorias para verificar o nível de maturidade do SOA open source em relação às soluções SOA proprietárias.

Open and standardized tools for smart transducer networking

IEEE 1451 Standard is intended to address the smart transducer interfacing problematic in network environments. Usually, proprietary hardware and software is a very efficient solution to in planent the IEEE 1451 normative, although can be expensive and inflexible. In contrast, the use of open and standardized tools for implementing the IEEE 1451 normative is proposed in this paper. Tools such as Java and Phyton programming languages, Linux, programmable logic technology, Personal Computer resources and Ethernet architecture were integrated in order to constructa network node based on the IEEE 1451 standards. The node can be applied in systems based on the client-server communication model The evaluation of the employed tools and expermental results are presented. © 2005 IEEE.

Comparative study on turning CI and CGI using silicon nitride cutting tools

There has been a great interest for improving the machining of cast iron materials in the automotive and other industries. Comparative studies for tool used to machine grey cast iron (CI) and compacted graphite iron (CGI) on dry machining were also performed in order to find out why in this case the tool lifetime is not significantly higher. However the machining these materials while considering turning with the traditional high-speed steel and carbide cutting tools present any disadvantages. One of these disadvantages is that all the traditional machining processes involve the cooling fluid to remove the heat generated on workpiece due to friction during cutting. This paper present a new generation of ceramic cutting tool exhibiting improved properties and important advances in machining CI and CGI. The tool performance was analyzed in function of flank wear, temperature and roughness, while can be observed that main effects were found for tool wear, were abrasion to CI and inter-diffusion of constituting elements between tool and CGI, causing crater. However the difference in tool lifetime can be explained by the formation of a MnS layer on the tool surface in the case of grey CI. This layer is missing in the case of CGI.

Study of cutting forces on machinability properties of gray cast iron using new ceramics cutting tools

During gray cast iron cutting, the great rate of mechanical energy from cutting forces is converted into heat. Considerable heat is generated, principally in three areas: the shear zone, rake face and at the clearance side of the cutting edge. Excessive heat will cause undesirable high temperature in the tool which leads to softening of the tool and its accelerated wear and breakage. Nowadays the advanced ceramics are widely used in cutting tools. In this paper a composition special of Si3N4 was sintering, characterized, cut and ground to make SNGN120408 and applyed in machining gray cast iron with hardness equal 205 HB in dry cutting conditions by using digital controlled computer lathe. The tool performance was analysed in function of cutting forces, flank wear, temperature and roughness. Therefore metal removing process is carried out for three different cutting speeds (300 m/min, 600 m/min, and 800 m/min), while a cutting depth of 1 mm and a feed rate of 0.33 mm/rev are kept constant. As a result of the experiments, the lowest main cutting force, which depends on cutting speed, is obtained as 264 N at 600 m/min while the highest main cutting force is recorded as 294 N at 300 m/min.

Utilizing cross-domain SOAP Web services using client-side languages in an enterprise mashup platform

Service oriented architectures (SOA) based on Simple Object Access Protocol (SOAP) Web services have attracted the attention of enterprises mainly for business-to-business integration and to create composite applications that execute business processes. An existing problem is the lack of preoccupation with non technical users due to the fact that to create a composite application to fulfill users needs, it is necessary to be in contact with IT staff. To overcome this issue, enterprises can take advantage of web 2.0, 'introducing in the development stage some technologies like mashups and some concepts like user empowerment, collaborative work and collective intelligence. Some results [3] [13] have shown how web 2.0 concepts can help non technical users to produce relative complex business processes. However, traditional enterprise requirements goes beyond typical web 2.0 solutions in several aspects: (1) traditional enterprise systems are based on heterogeneous stack of technologies that are not directly exploitable from a web-based client (where SOAP web services play an important role); (2) web browsers set some cross-domain security constraints making difficult to integrate services from diverse domains. In this paper, a contribution to two web 2.0 research projects [14] [15] partially solves the problems described: provide a way to invoke cross-domain backend services (based on SOAP technologies) directly only using clientside languages, without a need for any adaptation layer. © 2010 ACM.

Economic efficiency of free and open source software in the public sector: the example of Chile

Includes bibliography

Integrating open source codes for solid modeling and automatic mesh generation in FEM applications

The applications of the Finite Element Method (FEM) for three-dimensional domains are already well documented in the framework of Computational Electromagnetics. However, despite the power and reliability of this technique for solving partial differential equations, there are only a few examples of open source codes available and dedicated to the solid modeling and automatic constrained tetrahedralization, which are the most time consuming steps in a typical three-dimensional FEM simulation. Besides, these open source codes are usually developed separately by distinct software teams, and even under conflicting specifications. In this paper, we describe an experiment of open source code integration for solid modeling and automatic mesh generation. The integration strategy and techniques are discussed, and examples and performance results are given, specially for complicated and irregular volumes which are not simply connected. © 2011 IEEE.

Projeto de telefonia celular GSM baseada em open source e open hardware para comunidades rurais isoladas e carentes na região amazônica: estudo de caso em Itabocal – Irituia – Pará

Este trabalho teve como proposta realizar pesquisa das tecnologias existentes para telefonia e integração das mesmas para concepção de um sistema inovador e projetado para a realidade Amazônida. O trabalho incluiu avaliar a implementação de um sistema GSM open source / open hardware de custo zero para a população (telefonia celular gratuita) em comunidades rurais na Amazônia, com enfoque nas comunidades isoladas e carentes onde geralmente não há cobertura celular de operadoras comerciais, devido a falta de estímulo do governo e/ou interesse comercial de prover telefonia para essas populações mais pobres.