932 resultados para Object-oriented programming (Computer science)
Resumo:
El presente proyecto parte de un programa utilizado en las prácticas de laboratorio en la asignatura Antenas y Compatibilidad Electromagnética del sexto semestre llamado SABOR, que pretende ser actualizado para que en las nuevas versiones de los sistemas operativos ofrecidos por la compañía Windows pueda ser operativo. El objetivo principal será diseñar e implementar nuevas funcionalidades así como desarrollar mejoras y corregir errores del mismo. Para su mejor entendimiento se ha creado una herramienta en entorno MATLAB para analizar uno de los tipos más comunes de Apertura que se utilizan actualmente, las bocinas. Dicha herramienta es una interfaz gráfica que tiene como entradas las variables elementales de diseño de la apertura como por ejemplo: dimensiones de la propia bocina o los parámetros generales comunes a todas ellas. A su vez, el software nos genera algunos de los parámetros de salida fundamentales de las antenas: Directividad, Ancho de haz, Centro de fase y Spillover. Para el correcto desarrollo del software se ha realizado numerosas pruebas con el fin de depurar y corregir errores con respecto a la anterior versión del SABOR. Por otra parte se ha hecho también hincapié en la funcionalidad del programa para que sea más intuitivo y evitar complejidades. El tipo de antena que se pretende estudiar es la bocina que consiste en una guía de onda en la cual el área de la sección se va incrementando progresivamente hasta un extremo abierto, que se comporta como una apertura. Se utilizan extensamente en satélites comerciales para coberturas globales desde órbitas geoestacionarias, pero el uso más común es como elemento de radiación para reflectores de antenas. Los tipos de bocinas que se van a examinar en la herramienta son: Sectorial H, Sectorial E, Piramidal, Cónica, Cónica Corrugada y Piramidal Corrugada. El proyecto está desarrollado de manera que pueda servir de información teórico-práctico de todo el software SABOR. Por ello, el documento además de revisar la teoría de las bocinas analizadas, mostrará la información relacionada con la programación orientado a objetos en entorno MATLAB cuyo objetivo propio es adquirir una nueva forma de pensamiento acerca del proceso de descomposición de problemas y desarrollo de soluciones de programación. Finalmente se ha creado un manual de autoayuda para dar soporte al software y se han incluido los resultados de diversas pruebas realizadas para poder observar todos los detalles de su funcionamiento, así como las conclusiones y líneas futuras de acción. ABSTRACT This Project comes from a program used in the labs of the subject Antennas and Electromagnetic Compatibility in the sixth semester called SABOR, which aims to be updated in order to any type of computer running a Windows operating systems(Windows 7 and subsequent versions). The main objectives are design and improve existing functionalities and develop new features. In addition, we will correct mistakes in earlier versions. For a better understanding a new custom tool using MATLAB environment has been created to analyze one of the most common types of apertura antenna which is used for the moment, horns. This tool is a graphical interface that has elementary design variables as a inputs, for example: Dimensions of the own horn or common general parameters of all horns. At the same time, the software generate us some of the fundamental parameters of antennas output like Directivity, Beamwidth, Phase centre and Spillover. This software has been performed numerous tests for the proper functioning of the Software and we have been cared in order to debug and correct errors that were detected in earlier versions of SABOR. In addition, it has also been emphasized the program's functionality in order to be more intuitive and avoiding unnecessary barriers or complexities. The type of antenna that we are going to study is the horn which consists of a waveguides which the section area has been gradually increasing to an open-ended, that behaves as an aperture. It is widely used in comercial satellites for global coverage from geostationary orbits. However, the most common use is radiating element for antenna reflectors. The types of horns which is going to be considered are: Rectangular H-plane sectorial, Rectangular E-plane sectorial, Rectangular Pyramidal, Circular, Corrugated Circular and Corrugated Pyramidal. The Project is developed so that it can be used as practical-theorical information around the SABOR software. Therefore, In addition to thoroughly reviewing the theory document of analyzed horns, it display information related to the object-oriented programming in MATLAB environment whose goal leads us to a new way of thinking about the process of decomposition of problems and solutions development programming. Finally, it has been created a self-help manual in order to support the software and has been included the results of different tests to observe all the details of their operations, as well as the conclusions and future action lines.
Resumo:
The present work is aimed at discussing several issues related to the teamwork generic competence, motivational profiles and academic performance. In particular, we study the improvement of teamwork attitude, the predominant types of motivation in different contexts and some correlations among these three components of the learning process. The above-mentioned aspects are of great importance. Currently, the professional profile of engineers has a strong teamwork component and the motivational profile of students determines both their tendencies when they come to work as part of a team, as well as their performance at work. Taking these issues into consideration, we suggest four hypotheses: (H1) students improve their teamwork capacity through specific training and carrying out of a set of activities integrated into an active learning process; (H2) students with higher mastery motivation have a better attitude towards teamwork; (H3) students with different types of motivations reach different levels of academic performance; and (H4) students show different motivation profiles in different circumstances: type of courses, teaching methodologies, different times of the learning process. This study was carried out with Computer Science Engineering students from two Spanish universities. The first results point to an improvement in teamwork competence of students if they have previously received specific training in facets of that competence. Other results indicate that there is a correlation between the motivational profiles of students and their perception of teamwork competence. Finally, results point to a clear relationship between some kind of motivation and academic performance. In particular, four kinds of motivation are analyzed and students are classified into two groups according to them. After analyzing several marks obtained in compulsory courses, we perceive that those students that show higher motivation for avoiding failure obtain, in general, worse academic performance.
Resumo:
Sabor, Software de Análisis de BOcinas y Reflectores, es una herramienta didáctica la cual es utilizada en los laboratorios de la escuela para realizar prácticas de la asignatura Antenas y Compatibilidad Electromagnética, esta herramienta da a los alumnos una visión gráfica de lo que se enseña en clase de teoría de lo que son los campos en las aperturas de los reflectores. El proyector pretende sustituir al primer Sabor , ya que se queda obsoleto debido al sistema operativo, ya que funciona solo para Windows XP y con ordenadores de 32 bits, y también realizar mejoras y corregir errores de la versión anterior. El proyecto se ha desarrollado en Matlab que es un software matemático con grandes ventajas en cuanto a cálculo, desarrollo gráfico, y a la creación de nuevos algoritmos en su propio lenguaje y además está disponible para las plataformas Unix, Windows, Mac OSX y GNU/Linux. El objetivo del proyecto ha sido implementar, al igual que las versiones anteriores, cinco tipos de reflectores, como son: Parabólico, Offset, Cassegrain y los dos Dobles Offset, Cassegrain y Gregorian, y han sido analizados con un alimentador ideal ,cos-q, y por último los resultados obtenidos se han comparado con las versiones anteriores de Sabor, como son Sabor 3.0 y el primer Sabor. El proyecto consta de partes muy bien diferencias como son : La interpretación correctas de las formulas que se han utilizado para la realización de este proyecto ,dichas formulas han sido las dadas por el proyecto fin de carrera titulado Sabor3.0 de Francisco Egea Castejón. GUIDE, the graphical user interface development environment, con el que se creó: GUI, graphical user interface, que es la parte de Matlab dedicada a crear interfaces de usuario , herramienta utilizada para crear nuestras distintas ventanas dedicadas para la obtención de datos para analizar los distintos reflectores y para mostrar por pantalla los distintos resultados. Programación Orientada a Objetos de Matlab y sus distintas propiedades como son la herencia lo cual es muy útil para ocupar menos memoria ya que con un único método podemos realizar distintos cálculos con los distintos reflectores, objetos, solo cambiando las propiedades de cada objeto Y por último ha sido la realización de validación de los resultados con la ayuda de las versiones anteriores de Sabor, que están detallados en el capítulo 5 y la unión con bocinas del proyecto fin de carrera Análisis de Bocinas en Matlab de Javier Montero. Por otra parte tenemos las mejoras realizadas a las antiguas versiones como son: realización de registros que el usuario puede guardar y cargar con las distintas variables, también se ha realizado un fichero .txt en el que consta la amplitud del campo con su respectiva theta para que el usuario pueda visualizarlo en cualquier plataforma gráfica de datos como por ejemplo exel. ABSTRACT. Sabor, Software de Análisis de BOcinas y Reflectores, is a teaching tool, which is used to do laboratory practice in the subject of Antennas y Compatibilidad Electromagnética, this tool gives students a graphic view of the knowledge that are given in theory class in regard to aperture field of reflectors. This project intend to replace the first Sabor, because it is outdated, due to the operating system, because Sabor works only with Widows XP and computer with 32 bits, and to make improves and correct errors that were detected in the last version of Sabor too. This project has been carried out in Matlab, which is a mathematical software with high-level language for numerical computation, visualization and application development, and furthermore it is available to different platforms such as Unix, Windows ,Mac OSX and GNU/Linux This project has focused on implementing, the same as last versions, five kind of reflectors, such as : Parabolic, Offset, Cassegrain and two offset dual reflector Cassegrain y Gregorian ,and these were analysed with a cos-q ideal feed, and finally the results were checked with the versions of Sabor, as well as Sabor 3.0 and the first Sabor. This project consist of four parts: The correct interpretation of the formulas , which were used to do this project, from the final project Sabor3.0 by Francisco Egea Castejón. GUIDE, the graphical user interface development environment, tool that was used to create : GUI, graphical user interface, part of Matlab dedicated to create user interface. Object Oriented Programming of Matlab and different properties like inheritance, that is very useful for saving memory space because with only one method we can analyse different kind of reflectors, object, only change the properties of the object. At finally, the results were contrasted with the results from the previous versions and the link reflectors with horns from the final project Análisis de Bocinas en Matlab by Javier Montero. On the other hand, we have the improvements such as: registers and .txt file. The registers are used by user to save and load different variables and .txt file is useful because it allows to the user plotting in different platforms for example exel.
Resumo:
El objetivo de ésta tesis es estudiar cómo desarrollar una aplicación informática que implemente algoritmos numéricos de evaluación de características hidrodinámicas de modelos geométricos representativos de carenas de buques. Se trata de especificar los requisitos necesarios que debe cumplir un programa para informático orientado a dar solución a un determinado problema hidródinámico, como es simular el comportamiento en balance de un buque sometido a oleaje, de popa o proa. una vez especificada la aplicación se realizará un diseño del programa; se estudiarán alternativas para implementar la aplicación; se explicará el proceso que ha de seguirse para obtener la aplicación en funcionamiento y se contrastarán los resultados obtenidos en la medida que sea posible. Se pretende sistematizar y sintetizar todo el proceso de desarrollo de software, orientado a la simulación del comportamiento hidrodinámico de un buque, en una metodología que se pondrá a disposición de la comunidad académica y científica en la forma que se considere más adecuada. Se trata, por tanto, de proponer una metodología de desarrollo de software para obetener una aplicación que facilite la evaluación de diferentes alternativas de estudio variando parámetros relativos al problema en estudio y que sea capaz de proporcionar resultados para su análisis. Así mismo se incide en cómo ha de conducirse en el proceso para que dicha aplicación pueda crecer, incorporando soluciones existentes no implementadas o nuevas soluciones que aparezcan en este ámbito de conocimiento. Como aplicación concreta de la aplicación se ha elegido implementar los algoritmos necesarios para evaluar la aparición del balance paramétrico en un buque. En el análisis de éste problema se considera de interés la representación geométrica que se hace de la carena del buque. Además de la carena aparecen otros elementos que tienen influencia determinante en éste estudio, como son las situación de mar y las situaciones de carga. Idealmente, el problema sería resuelto si se consiguiera determinar el ángulo de balance que se produce al enfrentar un buque a las diferentes condiciones de mar. Se pretende preparar un programa utilizando el paradigma de la orientación a objetos. Considero que es la más adecuada forma de modularizar el programa para poder utilizar diferentes modelos de una misma carena y así comparar los resultados de la evaluación del balance paramétrico entre sí. En una etapa posterior se podrían comparar los resultados con otros obtenidos empíricamente. Hablo de una nueva metodología porque pretendo indicar cómo se ha de construir una aplicación de software que sea usable y sobre la que se pueda seguir desarrollando. Esto justifica la selección del lenguaje de programación C++. Se seleccionará un núcleo geométrico de software que permita acoplar de forma versátil los distintos componentes de software que van a construir el programa. Este trabajo pretende aplicar el desarrollo de software a un aspecto concreto del área de conocimiento de la hidrodinámica. No se pretende aportar nuevos algoritmos para resolver problemas de hidrodinámica, sino diseñar un conjunto de objetos de software que implementen soluciones existentes a conocidas soluciones numéricas a dichos problemas. Se trata fundamentalmente de un trabajo de software, más que de hidrodinámica. Lo que aporta de novedad es una nueva forma de realizar un programa aplicado a los cálculos hidrodinámicos relativos a la determinación del balance paramétrico, que pueda crecer e incorporar cualquier novedad que pueda surgir más adelante. Esto será posible por la programación modular utilizada y los objetos que representan cada uno de los elementos que intervienen en la determinación del balance paramétrico. La elección de aplicar la metodología a la predicción del balance paramétrico se debe a que este concepto es uno de los elementos que intervienen en la evaluación de criterios de estabilidad de segunda generación que estan en estudio para su futura aplicación en el ámbito de la construcción naval. Es por tanto un estudio que despierta interés por su próxima utilidad. ABSTRACT The aim of this thesis is to study how to develop a computer application implementing numerical algorithms to assess hydrodynamic features of geometrical models of vessels. It is therefore to propose a methodology for software development applied to an hydrodynamic problem, in order to evaluate different study alternatives by varying different parameters related to the problem and to be capable of providing results for analysis. As a concrete application of the program it has been chosen to implement the algorithms necessary for evaluating the appearance of parametric rolling in a vessel. In the analysis of this problem it is considered of interest the geometrical representation of the hull of the ship and other elements which have decisive influence in this phenomena, such as the sea situation and the loading condition. Ideally, the application would determine the roll angle that occurs when a ship is on waves of different characteristics. It aims to prepare a program by using the paradigm of object oriented programming. I think it is the best methodology to modularize the program. My intention is to show how face the global process of developing an application from the initial specification until the final release of the program. The process will keep in mind the spefici objetives of usability and the possibility of growing in the scope of the software. This work intends to apply software development to a particular aspect the area of knowledge of hydrodynamics. It is not intended to provide new algorithms for solving problems of hydrodynamics, but designing a set of software objects that implement existing solutions to these problems. This is essentially a job software rather than hydrodynamic. The novelty of this thesis stands in this work focuses in describing how to apply the whole proccess of software engineering to hydrodinamics problems. The choice of the prediction of parametric balance as the main objetive to be applied to is because this concept is one of the elements involved in the evaluation of the intact stability criteria of second generation. Therefore, I consider this study as relevant usefull for the future application in the field of shipbuilding.
Resumo:
Computer science studies possess a strong multidisciplinary aptitude since most graduates do their professional work outside of a computing environment, in close collaboration with professionals from many different areas. However, the training offered in computer science studies lacks that multidisciplinary factor, focusing more on purely technical aspects. In this paper we present a novel experience where computer studies and educational psychology find a common ground and realistic working through laboratory practices. Specifically, the work enables students of computer science education the development of diagnosis support systems, with artificial intelligence techniques, which could then be used for future educational psychologists. The applications developed by computer science students are the creation of a model for the diagnosis of pervasive developmental disorders (PDD), sometimes also commonly called the autism spectrum disorders (ASD). The complexity of this diagnosis, not only by the exclusive characteristics of every person who suffers from it, but also by the large numbers of variables involved in it, requires very strong and close interdisciplinary participation. This work demonstrates that it is possible to intervene in a curricular perspective, in the university, to promote the development of interpersonal skills. What can be shown, in this way, is a methodology for interdisciplinary practices design and a guide for monitoring and evaluation. The results are very encouraging since we obtained significant differences in academic achievement between students who attended a course using the new methodology and those who did not use it.
Resumo:
Bibliography: leaves [87]-[88]
Resumo:
Subject Category 59.
Resumo:
Illustrations, p. 30-52, numbered as leaves.
Resumo:
Includes bibliographical references.
Resumo:
Bibliography: p. 7-9.
Resumo:
"April, 1970"
Resumo:
Bibliography: p. 141-143.
Resumo:
Mode of access: Internet.