Audit report on the City of Newton, Iowa for the year ended June 30, 2013

Audit report on the City of Newton, Iowa for the year ended June 30, 2013

Synthesis of triheptanoin and formulation as a solid diet for rodents

Triheptanoin-enriched diets have been successfully used in the experimental treatment of various metabolic disorders. Maximal therapeutic effect is achieved in the context of a ketogenic diet where triheptanoin oil provides 3040% of the daily caloric intake. However, pre-clinical studies using triheptanoin-rich diets are hindered by the difficulty of administering to laboratory animals as a solid foodstuff. In the present study, we successfully synthesized triheptanoin to the highest standards of purity from glycerol and heptanoic acid, using sulfonated charcoal as a catalyst. Triheptanoin oil was then formulated as a solid, stable and palatable preparation using a ketogenic base and a combination of four commercially available formulation agents: hydrophilic fumed silica, hydrophobic fumed silica, microcrystalline cellulose, and talc. Diet compliance and safety was tested on C57Bl/6 mice over a 15-week period, comparing overall status and body weight change. Practical applications: This work provides a complete description of (i) an efficient and cost-effective synthesis of triheptanoin and (ii) its formulation as a solid, stable, and palatable ketogenic diet (triheptanoin-rich; 39% of the caloric intake) for rodents. Triheptanoin-rich diets will be helpful on pre-clinical experiments testing the therapeutic efficacy of triheptanoin in different rodent models of human diseases. In addition, using the same solidification procedure, other oils could be incorporated into rodent ketogenic diet to study their dosage and long-term effects on mammal health and development. This approach could be extremely valuable as ketogenic diet is widely used clinically for epilepsy treatment.

Using plan analysis in psychotherapeutic case formulation of borderline personality disorder.

A comprehensive understanding of the patient's problems is essential for a constructive therapeutic behaviour, especially in borderline personality disorder (BPD) where difficult interpersonal patterns are persistent. In these circumstances, the use of an integrative case formulation approach such as Plan Analysis, developed by K. Grawe and F. Caspar, can be of help for therapy planning. The focus here is on instrumental relations between behaviours and the hypothetical Plans and motives 'behind' those behaviours. The present qualitative study aimed at setting a prototypical Plan structure for n = 15 patients presenting a Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition, diagnosis of BPD using Plan Analysis. The first psychotherapeutic session of every outpatient was video-taped and evaluated according to the Plan Analysis procedure. Inter-rater reliability was established between two independent raters and was considered sufficient. The detailed prototypical Plan structure of BPD showed two main tendencies: first, the important presence of support-seeking among these patients and second, the will to be in control and to protect oneself. This study confirms the existence of several core similarities in the functioning of patients with BPD. These findings are in line with earlier studies and expand the latter with the aim of contributing to the understanding of BPD psychopathology. Clinical implications are discussed. Copyright © 2011 John Wiley & Sons, Ltd. KEY PRACTITIONER MESSAGE: Plan Analysis can especially be of help with patients who have difficult interpersonal patterns, as those presenting with BPD. Two tendencies were found within BPD patients: (1) support-seeking and (2) control and self-protecting Plans. Further research using Plan Analysis should focus on the identification and detail of emotions within BPD.

Synthesis of triheptanoin and formulation as a solid diet for rodents

Triheptanoin-enriched diets have been successfully used in the experimental treatment of various metabolic disorders. Maximal therapeutic effect is achieved in the context of a ketogenic diet where triheptanoin oil provides 3040% of the daily caloric intake. However, pre-clinical studies using triheptanoin-rich diets are hindered by the difficulty of administering to laboratory animals as a solid foodstuff. In the present study, we successfully synthesized triheptanoin to the highest standards of purity from glycerol and heptanoic acid, using sulfonated charcoal as a catalyst. Triheptanoin oil was then formulated as a solid, stable and palatable preparation using a ketogenic base and a combination of four commercially available formulation agents: hydrophilic fumed silica, hydrophobic fumed silica, microcrystalline cellulose, and talc. Diet compliance and safety was tested on C57Bl/6 mice over a 15-week period, comparing overall status and body weight change. Practical applications: This work provides a complete description of (i) an efficient and cost-effective synthesis of triheptanoin and (ii) its formulation as a solid, stable, and palatable ketogenic diet (triheptanoin-rich; 39% of the caloric intake) for rodents. Triheptanoin-rich diets will be helpful on pre-clinical experiments testing the therapeutic efficacy of triheptanoin in different rodent models of human diseases. In addition, using the same solidification procedure, other oils could be incorporated into rodent ketogenic diet to study their dosage and long-term effects on mammal health and development. This approach could be extremely valuable as ketogenic diet is widely used clinically for epilepsy treatment.

An operator formulation of the multiscale finite-volume method with correction function

The multiscale finite-volume (MSFV) method has been derived to efficiently solve large problems with spatially varying coefficients. The fine-scale problem is subdivided into local problems that can be solved separately and are coupled by a global problem. This algorithm, in consequence, shares some characteristics with two-level domain decomposition (DD) methods. However, the MSFV algorithm is different in that it incorporates a flux reconstruction step, which delivers a fine-scale mass conservative flux field without the need for iterating. This is achieved by the use of two overlapping coarse grids. The recently introduced correction function allows for a consistent handling of source terms, which makes the MSFV method a flexible algorithm that is applicable to a wide spectrum of problems. It is demonstrated that the MSFV operator, used to compute an approximate pressure solution, can be equivalently constructed by writing the Schur complement with a tangential approximation of a single-cell overlapping grid and incorporation of appropriate coarse-scale mass-balance equations.

Is diagnosis enough to guide interventions in mental health? Using case formulation in clinical practice.

ABSTRACT: While diagnosis has traditionally been viewed as an essential concept in medicine, particularly when selecting treatments, we suggest that the use of diagnosis alone may be limited, particularly within mental health. The concept of clinical case formulation advocates for collaboratively working with patients to identify idiosyncratic aspects of their presentation and select interventions on this basis. Identifying individualized contributing factors, and how these could influence the person's presentation, in addition to attending to personal strengths, may allow the clinician a deeper understanding of a patient, result in a more personalized treatment approach, and potentially provide a better clinical outcome.

Audit report on the City of Newton, Iowa for the year ended June 30, 2014

Audit report on the City of Newton, Iowa for the year ended June 30, 2014

Leonhard Euler: quatre lIiçons escollides

L'FME dedica el curs acadèmic 2006-2007 a la figura del matemàtic suís Leonhard Euler, una de les ments més importants de la història, comparable a Gauss o Arquímedes. La lliçó inaugural va anar a càrrec d'Enric Fossas, catedràtic i director de l'Institut d'Organització i Control de Sistemes Industrials de la UPC

A novel cyclosporin a aqueous formulation for dry eye treatment: in vitro and in vivo evaluation.

PURPOSE: The aim of the present study was the in vitro and in vivo evaluation of a novel aqueous formulation based on polymeric micelles for the topical delivery of cyclosporine A for dry eye treatment. METHODS: In vitro experiments were carried out on primary rabbit corneal cells, which were characterized by immunocytochemistry using fluorescein-labeled lectin I/isolectin B4 for the endothelial cells and mouse monoclonal antibody to cytokeratin 3+12 for the epithelial ones. Living cells were incubated for 1 hour or 24 hours with a fluorescently labeled micelle formulation and analyzed by fluorescence microscopy. In vivo evaluations were done by Schirmer test, osmolarity measurement, CyA kinetics in tears, and CyA ocular distribution after topical instillation. A 0.05% CyA micelle formulation was compared to a marketed emulsion (Restasis). RESULTS: The in vitro experiments showed the internalization of micelles in the living cells. The Schirmer test and osmolarity measurements demonstrated that micelles did not alter the ocular surface properties. The evaluation of the tear fluid gave similar CyA kinetics values: AUC = 2339 ± 1032 min*μg/mL and 2321 ± 881.63; Cmax = 478 ± 111 μg/mL and 451 ± 74; half-life = 36 ± 9 min and 28 ± 9 for the micelle formulation and Restasis, respectively. The ocular distribution investigation revealed that the novel formulation delivered 1540 ± 400 ng CyA/g tissue to the cornea. CONCLUSIONS: The micelle formulation delivered active CyA into the cornea without evident negative influence on the ocular surface properties. This formulation could be applied for immune-related ocular surface diseases.

The use of the SeDeM diagram expert system for the formulation of Captopril SR matrix tablets by direct compression

The SeDeM Diagram Expert System has been used to study excipients, Captopril and designed formulations for their galenic characterization and to ascertain the critical points of the formula affecting product quality to obtain suitable formulations of Captopril Direct Compression SR Matrix Tablets. The application of the Sedem Diagram Expert System enables selecting excipients with in order to optimize the formula in the preformulation and formulation studies. The methodology is based on the implementation of ICH Q8, establishing the design space of the formula with the use of experiment design, using the parameters of the SeDeM Diagram Expert System as system responses.

Newton - filosofi vai tiedemies?

Vastine kosmologian professori Kari Enqvistin kysymykseen artikkelissa "Onko fysiikka filosofiaa?" (TT-lehdessä 2/2006)

Accounting system for activity standard costs formulation in ERP environment

Toiminnanohjausjärjestelmän implementointi ja sen mukanaan tuomat muutokset tuotekustannuslaskentaan asettavat haasteita yritykselle. Metallitoimialalla toimivassa yrityksessä on havaittu samat haasteet implementoitaessa SAP R/3 toiminnanohjausjärjestelmää ja sen tuotekustannuslaskentatoiminnallisuutta. SAP R/3 tuotekustannuslogiikka tarvitsee tietoa järjestelmän ulkopuolelta, minkä huomioimatta jättäminen vaikuttaa suoraan laskentatarkkuuteen. Diplomityössä kehitetään sekä standardoitu prosessi että laskentajärjestelmä, joiden avulla pystytään laskemaan tarvittavat niin toimintokustannukset eri teräspalvelukeskuksen kuormituspisteille kuin kustannustenvyörytysarvot. Lasketut arvot muodostavat tarvittavat tekijät SAP R/3 tuotekustannuslaskennan master dataan. Tavoitteena on edesauttaa läpinäkyvän kustannustiedon muodostumista. Diplomityö pohjautuu ns. vesiputousmalliin (SDLC). Ensin tunnistetaan reunaehdot ympäristöstä, jossa tuotekustannuslaskenta toteutetaan. Tämä asettaa joustamattomia komponentteja kehitettävälle laskentajärjestelmälle. Joustavat komponentit sen sijaan antavat vapautta laskentajärjestelmälle. Yhdistämällä joustamattomat ja joustavat komponentit saavutetaan järjestelmä, jolla voidaan täydentää SAP R/3 tuotekustannuslaskennan puutteellisuutta.

Automated formulation of optimisation models for steel beam structures

Over 70% of the total costs of an end product are consequences of decisions that are made during the design process. A search for optimal cross-sections will often have only a marginal effect on the amount of material used if the geometry of a structure is fixed and if the cross-sectional characteristics of its elements are property designed by conventional methods. In recent years, optimalgeometry has become a central area of research in the automated design of structures. It is generally accepted that no single optimisation algorithm is suitable for all engineering design problems. An appropriate algorithm, therefore, mustbe selected individually for each optimisation situation. Modelling is the mosttime consuming phase in the optimisation of steel and metal structures. In thisresearch, the goal was to develop a method and computer program, which reduces the modelling and optimisation time for structural design. The program needed anoptimisation algorithm that is suitable for various engineering design problems. Because Finite Element modelling is commonly used in the design of steel and metal structures, the interaction between a finite element tool and optimisation tool needed a practical solution. The developed method and computer programs were tested with standard optimisation tests and practical design optimisation cases. Three generations of computer programs are developed. The programs combine anoptimisation problem modelling tool and FE-modelling program using three alternate methdos. The modelling and optimisation was demonstrated in the design of a new boom construction and steel structures of flat and ridge roofs. This thesis demonstrates that the most time consuming modelling time is significantly reduced. Modelling errors are reduced and the results are more reliable. A new selection rule for the evolution algorithm, which eliminates the need for constraint weight factors is tested with optimisation cases of the steel structures that include hundreds of constraints. It is seen that the tested algorithm can be used nearly as a black box without parameter settings and penalty factors of the constraints.

Theoretical Analysis and Simulations of Vertically Vibrated Granular Materials

The dynamical properties ofshaken granular materials are important in many industrial applications where the shaking is used to mix, segregate and transport them. In this work asystematic, large scale simulation study has been performed to investigate the rheology of dense granular media, in the presence of gas, in a three dimensional vertical cylinder filled with glass balls. The base wall of the cylinder is subjected to sinusoidal oscillation in the vertical direction. The viscoelastic behavior of glass balls during a collision, have been studied experimentally using a modified Newton's Cradle device. By analyzing the results of the measurements, using numerical model based on finite element method, the viscous damping coefficient was determinedfor the glass balls. To obtain detailed information about the interparticle interactions in a shaker, a simplified model for collision between particles of a granular material was proposed. In order to simulate the flow of surrounding gas, a formulation of the equations for fluid flow in a porous medium including particle forces was proposed. These equations are solved with Large Eddy Simulation (LES) technique using a subgrid-model originally proposed for compressible turbulent flows. For a pentagonal prism-shaped container under vertical vibrations, the results show that oscillon type structures were formed. Oscillons are highly localized particle-like excitations of the granular layer. This self-sustaining state was named by analogy with its closest large-scale analogy, the soliton, which was first documented by J.S. Russell in 1834. The results which has been reportedbyBordbar and Zamankhan(2005b)also show that slightly revised fluctuation-dissipation theorem might apply to shaken sand, which appears to be asystem far from equilibrium and could exhibit strong spatial and temporal variations in quantities such as density and local particle velocity. In this light, hydrodynamic type continuum equations were presented for describing the deformation and flow of dense gas-particle mixtures. The constitutive equation used for the stress tensor provides an effective viscosity with a liquid-like character at low shear rates and a gaseous-like behavior at high shear rates. The numerical solutions were obtained for the aforementioned hydrodynamic equations for predicting the flow dynamics ofdense mixture of gas and particles in vertical cylindrical containers. For a heptagonal prism shaped container under vertical vibrations, the model results were found to predict bubbling behavior analogous to those observed experimentally. This bubbling behavior may be explained by the unusual gas pressure distribution found in the bed. In addition, oscillon type structures were found to be formed using a vertically vibrated, pentagonal prism shaped container in agreement with computer simulation results. These observations suggest that the pressure distribution plays a key rolein deformation and flow of dense mixtures of gas and particles under vertical vibrations. The present models provide greater insight toward the explanation of poorly understood hydrodynamic phenomena in the field of granular flows and dense gas-particle mixtures. The models can be generalized to investigate the granular material-container wall interactions which would be an issue of high interests in the industrial applications. By following this approach ideal processing conditions and powder transport can be created in industrial systems.