Drift-net fishing in Ceylon waters

Fishing with drift-nets beyond the continental shelf was more profitable than fishing within the continental shelf. Fishing operations conducted over the year beyond the shelf yielded an average catch approximately 1000 lbs. per operation while fishing within the shelf yielded an average catch of 400 lbs. per operation. The seas off the south-west and south coasts were found to be much richer in pelagic fish than the seas off the east coasts. There was a seasonal abundance of fish off the south-west, south and east coasts of Ceylon. On the south-west and south coast fish were more abundant during the months of the south-west monsoon while on the east coast fish were more abundant during the months of the north-east monsoon. Drift-net fishing proved to be a more lucrative method of capturing fish than trolling, longlining and trawling in the seas off Ceylon, and has contributed to an increase in the gross catch in Ceylon waters.

Status of the gill net fishery for the small pelagic fish species in western, south-western and southern coastal waters of Sri Lanka during 1995-1997

Small pelagic fish species are mainly caught by gill nets operated by fibre reinforced plastic boats fitted with 8-25hp out board engines, traditional crafts fitted with 8-1hp out board engines and non mechanised traditional crafts. Around 28 to 55% of the small pelagic catch in the study area consisted of trenched sardine Amblygaster sirm during 1995-1997 period. Another 26-36% of the catch composed of other Sardinella species such as Sardinella gibbosa, S. albella, S. sindensis and S. longiceps. Engraulids such as Encrasicholina heteroloba, Stolephorus insularis and Stolephorus indicus and Thryssa spp formed around 3-5% of the catch. The major component of this fishery consisted of Clupeids and Engrauhds and over 65 species ranged between smaller Engraulids to incidental rock fish, sail fish, seer fish, sharks, skates and rays. Around 1.4 to 1.9% of the catch consisted of Chirocentrus dorab, Sphyraenaspp, Scomberomorus spp, Lepturcanthus sp and Megalaspis cordyla. Around 1-11% of the catch consisted of incidentally catches of sharks, rays, skates and sail fish. Another 1.6 to 6% of the catch consisted of Selar crumenophthalamus and Rastrelliger kanagurta. The best fishing season appeared to be from June to October in the west coast and August to December in the south coast. The major components of Amblygaster sirm, Sardinella albella and Sardinella gibbosa were caught within the size ranges of 10.0-22.5 cm, 11.0-13.0 cm and 11.0-15.0 cm respectively. However, smaller sized fish of above species of sizes between 6.9 cm to 9.7 cm total length were incidentally caught in the gill nets operated for small Engraulids with a stretched mesh size of 1.6cm. The overall catch rate for the major fish landing centre at Negombo indicated an increase from 38.5 kg/boat trip during 1984-1990 period to 49.5 kg/boat trip during 1995-1997 period. The catch rate for the dominant species Amblygaster sirm has decreased from 28.17 kg/boat trip during 1983-1990 period to 17.47 kg/boat trip during 1995-1997 period at Negombo. The paper also discusses the changing overall catch rates, change in species abundance and possible management consequences that should be considered.

Column set gill net fishing in Gobindsagar reservoir

Previous authors observed the influence of temperature variations in movement of fishes and noticed better catches in bottom set nets during summer in Tungabhadra reservoir. The present account reports on similar observations in Gobindsagar reservoir.

Preservation of cotton fish net twines by tanning 1. Optimum concentration of tanning

Samples of tannin-containing preservatives used by fishermen in India for treating cotton nets were collected and qualitative and quantitative characterisation of the tannins made. The concentrations of different tannins required to impart optimum periods of preservation to the net were worked out and found to be 2% in 8 out of 10 materials studied.

Preservation of cotton fish net twines by tanning 2. Fixation of tannin

Fixative behaviour of tannin belonging to three functional groups was stud1ed m deta1l using copper sulphate and potassium dichromate as oxidising agents.

Preliminary observations in the design and operation of a three panel, double trawl net

Fishing operations were conducted off Kakinada using a 3 panel double trawl net with twin cod-ends to study the utility of the net in catching both bottom and off bottom fishes. The observations indicate that the net is effective in simultaneous catching of bottom as well as off-bottom fishes and separating them while in operation. The design details of the net and the particulars of the fishing operations conducted are presented.

Stick held drag net for shore line fishes of reservoirs

Observations on the use of stick held drag nets for the removal of shore line fish, which adversely affect the growth of commercially important species in reservoirs, are presented.

A brief account on the 'Gunja Net' fishing of the Kutch Backwaters (Gujarat)

A survey was made of the fishing gear (Gunja net) and methods used in the prawn fishery of the coastal waters of the Gulf of Kutch.

Effect of hanging coefficient on the efficiency of frame net

Comparative fishing experiments with frame nets of 0.4 and 0.5 hanging coefficients were conducted. Results indicate that net with hanging coefficient of 0.4 as more effective for better catch.

Dol net fishery off Nawabunder (Gujarat)

Extimated catch of 6,484.9; 3,505.6 and 4,797.7 t of fishes were landed at Nawabunder in 'dol.' net during 1976-77, 1977-78 and 1978-1979 respectively. There has been an increasing trend in effort and decline in catch and catch rate. The catch rate came down from 174.8 kg in 1976-77 to 84 kg in 1978-79. The detailed studies on the catch composition revealed that the Bombay duck formed about 68.6-77% of the total catch. The other important constituents being Coilia dussumieri 1.5-9.2%, ribbon fish 3.0-6.5%, non-penaeid prawn, namely, Acetus indicus, Nematopalaemon tenuipes and Hippolysmata ensirostris together formed about 6.1-13.7% and penaied prawns 1.5-3.1% of the total dol net landings. In addition, quality fishes such as ghol, warn, pomfret and catfishes were also landed in considerable quantities. The landings of ghol are on the increase from 4.9 t in 1976-77 to 59 t in 1978-79. Large number of juveniles of economically important fishes namely, Harpodon nehereus, Pampus argenteus, Trichiurus lepturus and Ilisha filigera have been observed in the catch particularly during February-May. The destructive nature of the gear has been commented along with the suggestions for regulation of the fishery.

Influence of film cooling hole angles and geometries on aerodynamic loss and net heat flux reduction

Turbine design engineers have to ensure that film cooling can provide sufficient protection to turbine blades from the hot mainstream gas, while keeping the losses low. Film cooling hole design parameters include inclination angle (α), compound angle (β ), hole inlet geometry and hole exit geometry. The influence of these parameters on aerodynamic loss and net heat flux reduction is investigated, with loss being the primary focus. Low-speed flat plate experiments have been conducted at momentum flux ratios of IR = 0.16, 0.64 and 1.44. The film cooling aerodynamic mixing loss, generated by the mixing of mainstream and coolant, can be quantified using a three-dimensional analytical model that has been previously reported by the authors. The model suggests that for the same flow conditions, the aerodynamic mixing loss is the same for holes with different α and β but with the same angle between the mainstream and coolant flow directions (angle κ). This relationship is assessed through experiments by testing two sets of cylindrical holes with different α and β : one set with κ = 35°, another set with κ = 60°. The data confirm the stated relationship between α, β, κ and the aerodynamic mixing loss. The results show that the designer should minimise κ to obtain the lowest loss, but maximise β to achieve the best heat transfer performance. A suggestion on improving the loss model is also given. Five different hole geometries (α =35.0°, β =0°) were also tested: cylindrical hole, trenched hole, fan-shaped hole, D-Fan and SD-Fan. The D-Fan and the SD-Fan have similar hole exits to the fan-shaped hole but their hole inlets are laterally expanded. The external mixing loss and the loss generated inside the hole are compared. It was found that the D-Fan and the SD-Fan have the lowest loss. This is attributed to their laterally expanded hole inlets, which lead to significant reduction in the loss generated inside the holes. As a result, the loss of these geometries is ≈ 50 % of the loss of the fan-shaped hole at IR = 0.64 and 1.44. Copyright © 2011 by ASME.