Petróleo y gas en África: viejas realidades, nuevos escenarios

[cat] En els últims temps es parla molt del nou paper dels hidrocarburs d'Àfrica, fins i tot s'al·ludeix a un oil rush o a un african oil scramble , que inevitablement desembocarà en una confrontació bipolar entre la Xina i els Estats Units, pel control de les reserves de petroli del subsòl del continent africà. Així, el propòsit d'aquest text és, en primer lloc, realitzar una anàlisi descriptiva que ajudi a valorar la hipòtesi d'aquest african oil scramble. A continuación, amb les dades obtingudes, es discutirà sobre la possibilitat de que aquest fenomen desemboqui en un escenari de confrontació xinoamericana. Aquesta especulació ens durà a concloure que hi ha suficients indicis per a argumentar que el joc petrolífer africà podria desenvolupar-se en un escenari marcat per la multilateralitat.

Estudo do nitrogênio na combustão do gás natural

Nitrogen content in natural gas was studied in experimental and computational investigations to identify its influence on the emission level of exhaust gases from combustion facilities. Changes in natural gas composition with different N2 concentrations may result from introducing a new source gas into the system. An industrial burner fired at 75 kW, housed in a laboratory-scale furnace, was employed for runs where the natural gas/N2 proportion was varied. The exhaust and in-furnace measurements of temperature and gas concentrations were performed for different combustion scenarios, varying N2 content from 1-10 %v. Results have shown that the contamination of natural gas with nitrogen reduced the peak flame temperature, the concentration of unstable species, the NO X emission level and the heat transfer rate to the furnace walls, resulting from the recombination reactions.

Emissão de mercúrio para a atmosfera pela queima de gás natural no Brasil

Increasing natural gas use in Brazil triggered a discussion of its role as a Hg source. We show that Hg emissions to the atmosphere from fossil fuel combustion for power generation in Brazil contribute with 6.2% (4.2 t yr-1) to the total anthropogenic Hg atmospheric emissions, with coal combustion and biomass burning as major sources. Natural gas contributes with 0.04 t yr-1, mostly from electricity generation (88%) and industrial uses (7.6%). Preliminary results on Hg concentrations in natural gas suggest that a large fraction of it is trapped during refining and transport, which may create Hg point sources between extraction and consumption.

Comparação de diferentes abordagens para avaliação da incerteza na cromatografia gasosa do gás natural

The evaluation of uncertainty associated with an analytic result is an essential part of the measurement process. Recently, several approaches to evaluate the uncertainty in measurement have been developed. Here, the gas chromatography assay uncertainty for natural gas is compared by some of these approaches: the guide to the expression of uncertainty in measurement (GUM) approach, top-down approach (reproducibility estimate from an inter-laboratory study), Barwick & Ellison (data from validation), study of variability and fuzzy approach. The comparison shows that GUM, Barwick & Ellison and fuzzy approaches lead to comparable uncertainty evaluations, which does not happen with the top-down approach and study of variability by the absence of data normality.

Siirrettävän kompressorin käyttö maakaasuputkiston huoltotöissä

Maakaasuputkiston huolto- ja muutostöiden yhteydessä joudutaan tyhjentämään putkisto kaasusta, jotta voidaan taata turvalliset työskentelyolosuhteet. Nykyisin putkisto tyhjennetään johtamalla kaasu ilmakehään, avaamalla putkiston ulospuhallusventtiilit. Koska maakaasu (metaani) on merkittävä kasvihuonekaasu, on ympäristövaatimusten tiukentuessa etsittävä vaihtoehtoisia keinoja vähentää päästöjä. Lisäksi, talteen otettu kaasu voidaan myydä edelleen, ja näin ollen saavuttaa säästöjä. Tässä työssä on tutkittu mahdollisuuksia komprimoida kaasu siirrettävän kompressorin avulla putkisto-osuudesta toiseen ilman, että kaasua jouduttaisiin puhaltamaan ilmakehään. Työssä päädyttiin johtopäätökseen, että siirrettävän kompressorin hankinta ei ole tällä hetkellä kannattavaa, sen korkeiden investointikustannusten vuoksi. Kuitenkin mahdollinen päästömaksu metaanille, kaasun arvon nousu, sekä tekniikan parantuminen voivat nostaa menetelmän varteenotettavaksi vaihtoehdoksi hyvinkin nopeasti. Tämän vuoksi jatkotutkimuksen tekeminen aiheesta on perusteltua.

Horizontal Slug Flow in a Large-Size Pipeline: Experimentation and Modeling

The knowledge of the slug flow characteristics is very important when designing pipelines and process equipment. When the intermittences typical in slug flow occurs, the fluctuations of the flow variables bring additional concern to the designer. Focusing on this subject the present work discloses the experimental data on slug flow characteristics occurring in a large-size, large-scale facility. The results were compared with data provided by mechanistic slug flow models in order to verify their reliability when modelling actual flow conditions. Experiments were done with natural gas and oil or water as the liquid phase. To compute the frequency and velocity of the slug cell and to calculate the length of the elongated bubble and liquid slug one used two pressure transducers measuring the pressure drop across the pipe diameter at different axial locations. A third pressure transducer measured the pressure drop between two axial location 200 m apart. The experimental data were compared with results of Camargo's1 algorithm (1991, 1993), which uses the basics of Dukler & Hubbard's (1975) slug flow model, and those calculated by the transient two-phase flow simulator OLGA.

Lakisääteiset hitsaustyöt ja niiden laadunhallinta

Tässä diplomityössä selvitettiin UPM Kaukaan tehtailla esiintyviin lakisääteisiin hitsauskohteisiin liittyvää lainsäädäntöä ja lainsäädännön vaikutusta hitsaukselle. Lakisääteisiä hitsauskohteita ovat räjähdysvaaralliset tilat, painelaitteet, kemikaaliputkistot, kemikaalisäiliöt, maakaasulaitteet sekä kantavat teräsrakenteet. Diplomityössä selvitettiin lisäksi hitsauksen laadunhallintaa huomioiden korjaushitsaustyöt sekä uuden rakentaminen. Lakisääteet tuovat hitsauksen suorittamiselle usein tarkasti määritellyt velvoitteet koskien esimerkiksi dokumentointia, hitsaushenkilöstön pätevyyksiä, materiaaleja ja niin edelleen. Lakisääteet lisääntyvät jatkuvasti ja soveltamisalueet laajenevat, jolloin asioiden ylläpitäminen vaatii jatkuvaa seurantaa. Työssä luotiin ohjeistus koskien yleisesti hitsausta ja lisäksi käyttäjän ja omistajan velvoitteita koskevat ohjeet painelaitteista, maakaasulaitteista ja kemikaalilaitteista. Hitsauksen yleisohje koskee jokaista hitsaustapahtumaa korjaushitsauksesta uuden rakentamiseen. Ohje soveltuu lisäksi sopimusliitteeksi hitsaustyön tilauksissa.

Power to Gas - sähköenergiasta luonnonkaasua, liiketoimintamahdollisuudet Suomessa

Uusiutuvan sähköntuotannon osuuden kasvaessa kasvaa tarve tasata sähköntuotannon ja kulutuksen vaihteluita varastoimalla sähköä. Power to Gas (PtG) - sähköenergiasta luonnonkaasua tarjoaa yhden mahdollisuuden varastoida sähköä. Sähköä käytetään veden elektrolyysiin, jossa syntynyt vety käytetään metanoinissa yhdessä hiilidioksidin kanssa muodostamaan korvaavaa luonnonkaasua. Näin syntynyttä korvaava luonnonkaasua sähköstä kutsutaan e-SNG-kaasuksi. Tässä työssä tutkitaan PtG-laitoksen investointi, käyttö- ja kunnossapitokuluja. Työssä luodaan laskentamalli, jolla lasketaan PtG-laitoksen neljälle käyttötapaukselle kannattavuuslaskelma. Käyttötapauksille lasketaan myös herkkyystarkasteluja. Kannattavuuslaskelmien perusteella päätellään PtG-laitoksen liiketoimintamahdollisuudet Suomessa. Työssä laskettujen kannattavuuslaskelmien perusteella PtG-laitoksen perustapausten liiketoimintamahdollisuudet ovat huonot. Laskettujen herkkyystarkastelujen perusteella havaittiin, että investointikulut, laitoksen ajoaika ja lisätulot hapesta ja lämmöstä ovat kannattavuuden kannalta kriittisimmät menestystekijät.

Potential for synthetic gas in Finnish industry

Finland, other Nordic countries and European Union aim to decarbonize their energy production by 2050. Decarbonization requires large scale implementation of non-emission energy sources, i.e. renewable energy and nuclear power. Stochastic renewable energy sources present a challenge to balance the supply and demand for energy. Energy storages, non-emissions fuels in mobility and industrial processes are required whenever electrification is not possible. Neo-Carbon project studies the decarbonizing the energy production and the role of synthetic gas in it. This thesis studies the industrial processes in steel production, oil refining, cement manufacturing and glass manufacturing, where natural gas is already used or fuel switch to SNG is possible. The technical potential for fuel switching is assessed, and economic potential is necessary after this. All studied processes have potential for fuel switching, but total decarbonization of steel production, oil refining requires implementation of other zero-emission technologies.

Integrated energy storage tank for large scale power-to-gas applications

The global interest towards renewable energy production such as wind and solar energy is increasing, which in turn calls for new energy storage concepts due to the larger share of intermittent energy production. Power-to-gas solutions can be utilized to convert surplus electricity to chemical energy which can be stored for extended periods of time. The energy storage concept explored in this thesis is an integrated energy storage tank connected to an oxy-fuel combustion plant. Using this approach, flue gases from the plant could be fed directly into the storage tank and later converted into synthetic natural gas by utilizing electrolysis-methanation route. This work utilizes computational fluid dynamics to model the desublimation of carbon dioxide inside a storage tank containing cryogenic liquid, such as liquefied natural gas. Numerical modelling enables the evaluation of the transient flow patterns caused by the desublimation, as well as general fluid behaviour inside the tank. Based on simulations the stability of the cryogenic storage and the magnitude of the key parameters can be evaluated.

Benefits of gas driven ground source heat pump systems

This thesis studies energy efficiencies and technical properties of gas driven ground source heat pumps and pump systems. The research focuses on two technologies: gas engine driven compressor heat pump and thermally driven gas absorption heat pump. System consist of a gas driven compressor or absorption ground source heat pump and a gas condensing boiler, which covers peak load. The reference system is a standard electrically powered compressor heat pump with electric heating elements for peak load. The systems are compared through primary energy ratios. Coefficient of performances of different heat pump technologies are also compared. At heat pump level, gas driven heat pumps are having lower coefficient of performances as compared with corresponding electric driven heat pump. However, gas heat pumps are competitive when primary energy ratios, where electricity production losses are counted in, are compared. Technically, gas heat pumps can potentially achieve a slightly higher temperatures with greater total energy efficiency as compared to the electric driven heat pump. The primary energy ratios of gas heat pump systems in relation to EHP-system improves when the share of peak load increases. Electric heat pump system's overall energy efficiency is heavily dependent on the electricity production efficiency. Economy as well as CO2-emissions were not examined in this thesis, which however, would be good topics for further study.

Economics of Power-to-Gas integration to wastewater treatment plant

Solar and wind power produce electricity irregularly. This irregular power production is problematic and therefore production can exceed the need. Thus sufficient energy storage solutions are needed. Currently there are some storages, such as flywheel, but they are quite short-term. Power-to-Gas (P2G) offers a solution to store energy as a synthetic natural gas. It also improves nation’s energy self-sufficiency. Power-to-Gas can be integrated to an industrial or a municipal facility to reduce production costs. In this master’s thesis the integration of Power-to-Gas technologies to wastewater treatment as a part of the VTT’s Neo-Carbon Energy project is studied. Power-to-Gas produces synthetic methane (SNG) from water and carbon dioxide with electricity. This SNG can be considered as stored energy. Basic wastewater treatment technologies and the production of biogas in the treatment plant are studied. The utilisation of biogas and SNG in heat and power production and in transportation is also studied. The integration of the P2G to wastewater treatment plant (WWTP) is examined mainly from economic view. First the mass flows of flowing materials are calculated and after that the economic impact based on the mass flows. The economic efficiency is evaluated with Net Present Value method. In this thesis it is also studied the overall profitability of the integration and the key economic factors.

Analyse géographique des investissements internationaux de la China National Petroleum Corporation

Ce mémoire propose une analyse de l’expansion internationale de la China National Petroleum Corporation (CNPC) et des impacts de cette expansion sur la sécurité énergétique de la Chine. Dans le cadre de cette recherche, l’approvisionnement énergétique d’un pays est jugé sécuritaire lorsqu’une quantité suffisante de ressources nécessaires pour combler sa demande en énergie sont présentes, disponibles et accessibles et que son approvisionnement en services énergétiques demeure fiable et abordable. La recherche comporte quatre volets. Le premier volet porte sur les étapes de la restructuration de l’industrie pétrolière chinoise depuis 1949. Celle-ci est analysée au travers des changements dans les modes de gestion des compagnies pétrolières nationales et dans leurs relations avec le gouvernement chinois. Le deuxième volet traite de la diversification et des nouvelles spécialisations de CNPC. Ces aspects sont étudiés dans le cadre d’une analyse du pourcentage de ses actifs dans chaque segment industriel (aval, intermédiaire et amont) obtenus grâce à ses rapports annuels. Le troisième volet aborde la répartition géographique des activités de la compagnie que l’on étudie à l’aide d’une analyse approfondie de près de 150 investissements, acquisitions et contrats réalisés à l’étranger entre 1992 et 2014. Le quatrième volet aborde les impacts des investissements à l’étranger de la compagnie sur la sécurité énergétique de la Chine. Ces impacts sont mesurés par l’entremise d’une analyse des flux pétroliers internationaux vers la Chine que l’on compare à la production de CNPC par pays. Ce mémoire permet de déterminer que l’expansion internationale de CNPC sert d’abord et avant tout les intérêts économiques de la compagnie. Ce sont surtout ses investissements dans la construction d’infrastructures de transport (oléoducs, gazoducs ainsi que les usines et terminaux de liquéfaction de gaz naturel liquéfié) qui apportent des bénéfices directs à la sécurité énergétique de la Chine. La contribution des investissements dans les autres secteurs est beaucoup moins systématique et dépend largement de la période au cours de laquelle ils ont été effectués.

La(2-x)Ce(x)Cu(1-y)Zn(y)O(4) perovskites for high temperature water-gas shift reaction

The performance of La(2-x)Ce(x)Cu(1-y)Zn(y)O(4) perovskites as catalysts for the high temperature water-gas shift reaction (H T-W G S R) was investigated. The catalysts were characterized by EDS, XRD, BET surface area, TPR, and XANES. The results showed that all the perovskites exhibited the La(2)CuO(4) orthorhombic structure, so the Pechini method is suitable for the preparation of pure perovskite. However, the La(1.90)Ce(0.10)CuO(4) perovskite alone, when calcined at 350/700 degrees C, also showed a (La(0.935)Ce(0.065))(2)CuO(4) perovskite with tetragonal structure, which produced a surface area higher than the other perovskites. The perovskites that exhibited the best catalytic performance were those calcined at 350/700 degrees C and, among these, La(1.90)Ce(0.10)CuO(4) was outstanding, probably because of the high surface area associated with the presence of the (La(0.935)Ce(0.065))(2)CuO(4) perovskite with tetragonal structure and orthorhombic La(2)CuO(4) phase.

Effects of the partial replacement of La by M (M=Ce, Ca and Sr) in La(2-x)M(x)CuO(4) perovskites on catalysis of the water-gas shift reaction

The performance of La(2-x)M(x)CuO(4) perovskites (where M = Ce, Ca or Sr) as catalysts for the water-gas shift reaction was investigated at 290 degrees C and 360 degrees C. The catalysts were characterized by EDS, XRD, N(2) adsorption-desorption, XPS and XANES. The XRD results showed that all the perovskites exhibited a single phase (the presence of perovskite structure), suggesting the incorporation of metals in the perovskite structure. The XPS and XANES results showed the presence of Cu(2+) on the surface. The perovskites that exhibited the best catalytic performance were La(2-x)Ce(x)CuO(4) perovslcites, with CO conversions of 85%-90%. Moreover, these perovskites have higher surface areas and larger amounts of Cu on the surface. And Ce has a higher filled energy level than the other metals, increasing the energy of the valence band of Ce and providing more electrons for the reaction. Besides, the La(1.80)Ca(0.20)CuO(4) perovskite showed a good catalytic performance.