Evaluation of the Electric Vehicle Impact in the Power Demand Curve in a Smart Grid Environment

Smart grids with an intensive penetration of distributed energy resources will play an important role in future power system scenarios. The intermittent nature of renewable energy sources brings new challenges, requiring an efficient management of those sources. Additional storage resources can be beneficially used to address this problem; the massive use of electric vehicles, particularly of vehicle-to-grid (usually referred as gridable vehicles or V2G), becomes a very relevant issue. This paper addresses the impact of Electric Vehicles (EVs) in system operation costs and in power demand curve for a distribution network with large penetration of Distributed Generation (DG) units. An efficient management methodology for EVs charging and discharging is proposed, considering a multi-objective optimization problem. The main goals of the proposed methodology are: to minimize the system operation costs and to minimize the difference between the minimum and maximum system demand (leveling the power demand curve). The proposed methodology perform the day-ahead scheduling of distributed energy resources in a distribution network with high penetration of DG and a large number of electric vehicles. It is used a 32-bus distribution network in the case study section considering different scenarios of EVs penetration to analyze their impact in the network and in the other energy resources management.

Layerwise mixed models for analysis of multilayered piezoelectric composite plates using least-squares formulation

This work provides an assessment of layerwise mixed models using least-squares formulation for the coupled electromechanical static analysis of multilayered plates. In agreement with three-dimensional (3D) exact solutions, due to compatibility and equilibrium conditions at the layers interfaces, certain mechanical and electrical variables must fulfill interlaminar C-0 continuity, namely: displacements, in-plane strains, transverse stresses, electric potential, in-plane electric field components and transverse electric displacement (if no potential is imposed between layers). Hence, two layerwise mixed least-squares models are here investigated, with two different sets of chosen independent variables: Model A, developed earlier, fulfills a priori the interiaminar C-0 continuity of all those aforementioned variables, taken as independent variables; Model B, here newly developed, rather reduces the number of independent variables, but also fulfills a priori the interlaminar C-0 continuity of displacements, transverse stresses, electric potential and transverse electric displacement, taken as independent variables. The predictive capabilities of both models are assessed by comparison with 3D exact solutions, considering multilayered piezoelectric composite plates of different aspect ratios, under an applied transverse load or surface potential. It is shown that both models are able to predict an accurate quasi-3D description of the static electromechanical analysis of multilayered plates for all aspect ratios.

Algebraic structure for interaction on mixed models

Binary operations on commutative Jordan algebras, CJA, can be used to study interactions between sets of factors belonging to a pair of models in which one nests the other. It should be noted that from two CJA we can, through these binary operations, build CJA. So when we nest the treatments from one model in each treatment of another model, we can study the interactions between sets of factors of the first and the second models.

Privatization in an international mixed duopoly with environmental taxes

We study the effects of environmental and trade policies in an international duopoly serving two countries, with pollution abatement. This analysis is done in both mixed and privatized markets. The model has two stages: First, governments choose environmental taxes and import tariffs, simultaneously; then, the firms compete in the market by choosing output levels for the domestic market and to export and also abatement levels.

Privatization and social welfare in an international mixed Stackelberg duopoly

Competition between public and private firms exists in a range of industries like telecommunications, electricity, natural gas, airlines industries, as weel as services including hospitals, banking and education. Some authors studied mixed oligopolies under Cournot competition (firms move simultaneously) and some others considered Stackelberg models (firms move sequentially). Tomaru [1] analyzed, in a Cournot model, how decision-making upon cost-reducing R&D investment by a domestic public firm is affected by privatization when competing in the domestic market with a foreign firm. He shows that privatization of the domestic public firm lowers productive efficiency and deteriorates domestic social welfare. In this paper, we examine the same question but in a Stackelberg formulation instead of Cournot. The model is a three-stage game. In the first stage, the domestic firm chooses the amount of cost-reducing R&D investment. Then, the firms compete à la Stackelberg. Two cases are considered: (i) The domestic firm is the leader; (ii) The foreign firm is the leader. We show that the results obtained in [1] for Cournot competition are robust in the sence that they are also true when firms move sequentially.

Considerations on the Least Upper Bound for Mixed-Criticality Real-Time Systems

5th Brazilian Symposium on Computing Systems Engineering, SBESC 2015 (SBESC 2015). 3 to 6, Nov, 2015. Foz do Iguaçu, Brasil.

How realistic is the mixed-criticality real-time system model?

23rd International Conference on Real-Time Networks and Systems (RTNS 2015). 4 to 6, Nov, 2015, Main Track. Lille, France. Best Paper Award Nominee

Energy-aware Task Allocation onto Unrelated Heterogeneous Multicore Platform for Mixed Criticality Systems

Presented at Work in Progress Session, IEEE Real-Time Systems Symposium (RTSS 2015). 1 to 4, Dec, 2015. San Antonio, U.S.A..

Embedded Multi-Core systems for Mixed Criticality applications in dynamic and changeable real-time environments

EMC2 finds solutions for dynamic adaptability in open systems. It provides handling of mixed criticality multicore applications in r eal-time conditions, withscalability and utmost flexibility, full-scale deployment and management of integrated tool chains, through the entire lifecycle.

Efficacy of euphorbia hirta latex as plant derived molluscicides against freshwater snails

The toxic effect of binary and tertiary combinations of Euphorbia hirta Linn latex powder with other plant molluscicidal compounds, were evaluated against the freshwater snails Lymnaea (Radix) acuminata and Indoplanorbis exustus in pond. These combinations showed significant time and dose dependent effect against both the snails. These compounds at higher doses were also lethal to freshwater fish Channa punctatus (Bloch) (Channidae {Ophicephalidae}), which shares the habitat with these snails, but the LC90 (24h) doses of snails have no apparent killing properties in fish populations when treated in mixed population of snails and fish.

Advances on the production of polyhydroxyalkanoates (PHA) by mixed microbial cultures from sugar cane molasses

Dissertação para obtenção do Grau de Mestre em Biotecnologia

THE SERO-CONVERSION AND EVALUATION OF RENAL ALTERATIONS IN DOGS INFECTED BY Leishmania (Infantum) chagasi

This study investigated the sero-conversion period in which dogs from endemic areas test positive for visceral leishmaniasis (VL) as well as the early post-infection period in which renal alterations are observed. Dogs that were initially negative for Canine Visceral Leishmaniasis (CVL) were clinically evaluated every three months by serological, parasitological and biochemical tests until sero-conversion was confirmed, and six months later a subsequent evaluation was performed. Samples of kidney tissues were processed and stained with Hematoxylin and Eosin (H&E), Periodic Acid Schiff (PAS) and Masson’s trichrome stain and lesions were classified based on the WHO criteria. Of the 40 dogs that initially tested negative for VL, 25 (62.5%) exhibited positive serological tests during the study period. Of these 25 dogs, 15 (60%) tested positive within three months, five (20%) tested positive within six months and five (20%) tested positive within nine months. The dogs exhibited antibody titers between 1:40 and 1:80 and 72% of the dogs exhibited clinical symptoms. The Leishmania antigen was present in the kidneys of recently infected dogs. We found higher levels of total protein and globulin as well as lower levels of albumin in the infected dogs when compared to the control dogs. Additionally, infected dogs presented levels of urea and creatinine that were higher than those of the uninfected dogs. Glomerulonephritis was detected in some of the dogs examined in this study. These data suggest that in Teresina, the sero-conversion for VL occurs quickly and showed that the infected dogs presented abnormal serum proteins, as well as structural and functional alterations in the kidneys during the early post-infection period.

Pipelined analog-to-digital conversion using current-mode reference shifting

Dissertação para obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores

Balancing and lot-sizing mixed-model lines in the footwear industry

This report describes the full research proposal for the project \Balancing and lot-sizing mixed-model lines in the footwear industry", to be developed as part of the master program in Engenharia Electrotécnica e de Computadores - Sistemas de Planeamento Industrial of the Instituto Superior de Engenharia do Porto. The Portuguese footwear industry is undergoing a period of great development and innovation. The numbers speak for themselves, Portugal footwear exported 71 million pairs of shoes to over 130 countries in 2012. It is a diverse sector, which covers different categories of women, men and children shoes, each of them with various models. New and technologically advanced mixed-model assembly lines are being projected and installed to replace traditional mass assembly lines. Obviously there is a need to manage them conveniently and to improve their operations. This work focuses on balancing and lot-sizing stitching mixed-model lines in a real world environment. For that purpose it will be fundamental to develop and evaluate adequate effective solution methods. Different objectives may be considered, which are relevant for the companies, such as minimizing the number of workstations, and minimizing the makespan, while taking into account a lot of practical restrictions. The solution approaches will be based on approximate methods, namely by resorting to metaheuristics. To show the impact of having different lots in production the initial maximum amount for each lot is changed and a Tabu Search based procedure is used to improve the solutions. The developed approaches will be evaluated and tested. A special attention will be given to the solution of real applied problems. Future work may include the study of other neighbourhood structures related to Tabu Search and the development of ways to speed up the evaluation of neighbours, as well as improving the balancing solution method.

Atorvastatin versus Bezafibrate in Mixed Hyperlipidaemia : Randomised Clinical Trial of Efficacy and Safety (the ATOMIX Study)

OBJECTIVE: Combined hyperlipidaemia is a common and highly atherogenic lipid phenotype with multiple lipoprotein abnormalities that are difficult to normalise with single-drug therapy. The ATOMIX multicentre, controlled clinical trial compared the efficacy and safety of atorvastatin and bezafibrate in patients with diet-resistant combined hyperlipidaemia. PATIENTS AND STUDY DESIGN: Following a 6-week placebo run-in period, 138 patients received atorvastatin 10mg or bezafibrate 400mg once daily in a randomised, double-blind, placebo-controlled trial. To meet predefined low-density lipoprotein-cholesterol (LDL-C) target levels, atorvastatin dosages were increased to 20mg or 40mg once daily after 8 and 16 weeks, respectively. RESULTS: After 52 weeks, atorvastatin achieved greater reductions in LDL-C than bezafibrate (percentage decrease 35 vs 5; p < 0.0001), while bezafibrate achieved greater reductions in triglyceride than atorvastatin (percentage decrease 33 vs 21; p < 0.05) and greater increases in high-density lipoprotein-cholesterol (HDL-C) [percentage increase 28 vs 17; p < 0.01 ]. Target LDL-C levels (according to global risk) were attained in 62% of atorvastatin recipients and 6% of bezafibrate recipients, and triglyceride levels <200 mg/dL were achieved in 52% and 60% of patients, respectively. In patients with normal baseline HDL-C, bezafibrate was superior to atorvastatin for raising HDL-C, while in those with baseline HDL-C <35 mg/dL, the two drugs raised HDL-C to a similar extent after adjustment for baseline values. Both drugs were well tolerated. CONCLUSION: The results show that atorvastatin has an overall better efficacy than bezafibrate in concomitantly reaching LDL-C and triglyceride target levels in combined hyperlipidaemia, thus supporting its use as monotherapy in patients with this lipid phenotype.