Biopsy case mix and diagnostic yield at a Malawian central hospital

Cancer is a major disease burden worldwide resulting in high morbidity and mortality. It is the leading cause of mortality in developed countries and is one of the three leading causes of death for adults in developing countries. Pathological examination of tissue biopsies with histological confirmation of a correct cancer diagnosis is central to cancer care. Without an accurate and specific pathologic diagnosis, effective treatment cannot be planned or delivered. In addition, there are marked geographical variations in incidence of cancer overall, and of the specific cancers seen. Much of the published literature on cancer incidence in developing countries reflects gross estimates and may not reflect reality. Performing baseline studies to understand these distributions lays the groundwork for further research in this area of cancer epidemiology. Our current study surveys and ranks cancer diagnoses by individual anatomical site at Queen Elizabeth Central Hospital (QECH) which is the largest teaching and referral hospital in Malawi. A retrospective study was conducted reviewing available pathology reports over a period of one full year from January 2010 to December 2010 for biopsies from patients suspected clinically of having cancer. There were 544 biopsies of suspected cancer, taken from 96 anatomical sites. The oesophagus was the most common biopsied site followed by breast, bladder, bone, prostate, bowel, and cervical lymph node. Malignancies were found in biopsies of the oesophagus biopsies (squamous cell carcinoma, 65.1%; adenocarcinoma, 11.6%), breast (57.5%), bladder (squamous cell carcinoma, 53.1%) and stomach (37.6%). Our study demonstrates that the yield of biopsy for clinically suspected malignancy was greater than 50% for the 11 most common sites and provides a current survey of cancer types by site present in the population reporting to our hospital.

Katharina Mangold / Claudia Muche / Sabrina Volk: Educational Mix in der frühen Kindheit. Regionale Dienstleistungsinfrastrukturen im Vergleich. Weinheim und Basel: Beltz Juventa 2013 (212 S.) [Rezension]

Rezension von: Katharina Mangold / Claudia Muche / Sabrina Volk: Educational Mix in der frühen Kindheit. Regionale Dienstleistungsinfrastrukturen im Vergleich. Weinheim und Basel: Beltz Juventa 2013 (212 S.; ISBN 978-3-7799-2819-5)

Impacto de la adecuada codificación de la desnutrición y procesos asociados sobre el índice case-mix en patologías médicas y quirúrgicas

Introducción: la clasificación por procesos según el sistema de los grupos relacionados con el diagnóstico permite clasificar los diferentes procesos acorde a un consumo de recursos equivalentes. La complejidad de los procesos según el índice case-mix permite solicitar un mayor o menor presupuesto para la atención de los pacientes. La desnutrición tiene capacidad para aumentar el índice case-mix si bien en muchos casos este diagnóstico y el de los procesos nutricionales no se realizan de forma adecuada. Objetivo: determinar si la adecuada codificación de la desnutrición es capaz de aumentar el índice case-mix y si este aumento es dependiente de la documentación del mismo por un médico especialista, el tipo de proceso o el servicio de ingreso. Resultados: en una serie aleatorizada de 100 pacientes, la documentación de desnutrición y procesos asociados por parte de un médico especialista en Endocrinología y Nutrición produjo un aumento de 0,68 puntos en el índice case-mix (IC95: 0,48-0,88). El impacto fue mayor en procesos médicos que en quirúrgicos (0,42 puntos [IC95: 0,03-0,81]). Por servicios, el impacto fue positivo en Medicina Interna y Cirugía General. El tamaño muestral para el cálculo del resto de servicios no alcanzó tamaño muestral suficiente. Conclusión: el aumento de recursos humanos (médicos especialistas en Endocrinología y Nutrición) es viable en términos de gestión por el aumento del índice case-mix dependiente de su presencia en un contexto de práctica clínica habitual, no de investigación.

Studio, sviluppo e codifica di un modello dinamico per la gestione del mix produttivo di piattaforme di prodotto

Con le crescenti esigenze di personalizzazione, la capacità di prevedere con precisione la domanda di un numero sempre maggiore di prodotti è diventata una delle caratteristiche fondamentali che l’azienda manufatturiera moderna deve possedere. L’esigenza dunque di fornire una gamma di prodotti sempre più vasta, contenendo i costi associati alla realizzazione e alla giacenza dei prodotti finiti e contemporaneamente riducendo al minimo i tempi di risposta alla domanda, non viene pienamente soddisfatta da nessuna delle due politiche produttive che rappresentano i due approcci più classici, ossia le due strategie Make-To-Stock (MTS) e Make-To-Order (MTO). Per rispondere a questa esigenza di personalizzazione è stata proposta un’ulteriore politica produttiva nota come Delayed Product Differentiation (DPD) basata sul concetto delle piattaforme di prodotto, ossia delle strutture comuni a più prodotti diversi che, tramite l’aggiunta dei componenti, permettono di ottenere la gamma di prodotti finali richiesti. Il seguente lavoro di tesi si pone lo scopo di studiare, tramite un algoritmo ideato e sviluppato con l’ausilio del linguaggio di programmazione di Matlab, il caso di un sistema che già adotta l’approccio DPD per riuscire a trovare una soluzione al problema di estendere il catalogo iniziale degli articoli presenti, avendo una lista di prodotti nuovi da analizzare e dovendo scegliere quali aggiungere e quali invece eliminare, stabilendo come modificare le piattaforme per l’aggiunta di essi.

Applicazione allo scenario italiano di un modello di costo dinamico per l'ottimizzazione del mix energetico e la gestione della rete elettrica

Nell’attuale contesto energetico di forte instabilità, prezzi e produttività subiscono continue variazioni a causa di fattori politici ed economici. Il sistema elettrico è chiamato a rispondere velocemente ai cambiamenti garantendo continuamente il soddisfacimento del fabbisogno di energia elettrica. Nel presente elaborato viene utilizzato un modello di costo dinamico, estratto dalla letteratura scientifica, con lo scopo di gestire efficientemente i flussi energetici e garantire una programmazione ottimale del mix produttivo. Viene analizzato lo scenario italiano mettendo in relazione produzione, trasmissione e domanda energetica. I dati utilizzati fanno riferimento, quanto più possibile, al contesto attuale. Coerentemente con la situazione reale i risultati ottenuti mettono in risalto le criticità e i punti di forza principali del sistema elettrico italiano delineando i possibili cambiamenti attuabili a medio termine.

Evaluation Of The Radiopacity Of Esthetic Root Canal Posts.

The radiopacity of esthetic root canal posts may impair the assessment of their fit to the root canal when using radiographic images. This study determined in vitro the radiographic density of esthetic root canal posts using digital images. Thirty-six roots of human maxillary canines were assigned to six groups (N=6 per group): Reforpost (RP); Aestheti-Plus (AP); Reforpost MIX (RPM); D.T. Light Post (LP); Reforpost Radiopaque (RPR); and White Post DC (WP). Standardized digital images of the posts were obtained in different conditions: outside the root canal, inside the canal before and after cementation using luting material, and with a tissue simulator. Analysis of variance was used to compare the radiopacity mean values among the posts outside the root canal and among the posts under the other conditions, and the t unpaired test to compare the radiopacity between the posts and the dentin, and between the posts and the root canal space. There was no statistically significant difference in radiopacity between RP and RPM, and LP and WP. AP posts showed radiopacity values significantly lower than those for dentin. No statistically significant difference was found between posts (RP and AP) and the root canal space. A statistically significant difference was observed between the luted and non-luted posts; additionally, luted posts with and without tissue simulator showed no significant differences. Most of the cement-luted posts analyzed in this study were distinguishable from the density of adjacent dentin surfaces, allowing radiographic confirmation of the fit of the post in the canal. The success of using esthetic root canal posts depends mainly on the fit of the post within the canal.[1] The radiopacity of a post allows for radiographic imaging to be used to determine the fit, an important factor in a clinical perspective.

Accuracy of stone casts obtained by different impression materials

Several impression materials are available in the Brazilian marketplace to be used in oral rehabilitation. The aim of this study was to compare the accuracy of different impression materials used for fixed partial dentures following the manufacturers' instructions. A master model representing a partially edentulous mandibular right hemi-arch segment whose teeth were prepared to receive full crowns was used. Custom trays were prepared with auto-polymerizing acrylic resin and impressions were performed with a dental surveyor, standardizing the path of insertion and removal of the tray. Alginate and elastomeric materials were used and stone casts were obtained after the impressions. For the silicones, impression techniques were also compared. To determine the impression materials' accuracy, digital photographs of the master model and of the stone casts were taken and the discrepancies between them were measured. The data were subjected to analysis of variance and Duncan's complementary test. Polyether and addition silicone following the single-phase technique were statistically different from alginate, condensation silicone and addition silicone following the double-mix technique (p < .05), presenting smaller discrepancies. However, condensation silicone was similar (p > .05) to alginate and addition silicone following the double-mix technique, but different from polysulfide. The results led to the conclusion that different impression materials and techniques influenced the stone casts' accuracy in a way that polyether, polysulfide and addition silicone following the single-phase technique were more accurate than the other materials.

Insights on the Milky Way bulge formation from the correlations between kinematics and metallicity

Context. Two main scenarios for the formation of the Galactic bulge are invoked, the first one through gravitational collapse or hierarchical merging of subclumps, the second through secular evolution of the Galactic disc. Aims. We aim to constrain the formation of the Galactic bulge through studies of the correlation between kinematics and metallicities in Baade's Window (l = 1 degrees, b = -4 degrees) and two other fields along the bulge minor axis (l = 0 degrees, b = -6 degrees and b = -12 degrees). Methods. We combine the radial velocity and the [Fe/H] measurements obtained with FLAMES/GIRAFFE at the VLT with a spectral resolution of R = 20 000, plus for the Baade's Window field the OGLE-II proper motions, and compare these with published N-body simulations of the Galactic bulge. Results. We confirm the presence of two distinct populations in Baade's Window found in Hill et al. (2010, A&A, submitted): the metal-rich population presents bar-like kinematics while the metal-poor population shows kinematics corresponding to an old spheroid or a thick disc. In this context the metallicity gradient along the bulge minor axis observed by Zoccali et al. (2008, A&A, 486, 177), visible also in the kinematics, can be related to a varying mix of these two populations as one moves away from the Galactic plane, alleviating the apparent contradiction between the kinematic evidence of a bar and the existence of a metallicity gradient. Conclusions. We show evidence that the two main scenarios for the bulge formation co-exist within the Milky Way bulge.

The CoRoT-7 planetary system: two orbiting super-Earths

We report on an intensive observational campaign carried out with HARPS at the 3.6 m telescope at La Silla on the star CoRoT-7. Additional simultaneous photometric measurements carried out with the Euler Swiss telescope have demonstrated that the observed radial velocity variations are dominated by rotational modulation from cool spots on the stellar surface. Several approaches were used to extract the radial velocity signal of the planet(s) from the stellar activity signal. First, a simple pre-whitening procedure was employed to find and subsequently remove periodic signals from the complex frequency structure of the radial velocity data. The dominant frequency in the power spectrum was found at 23 days, which corresponds to the rotation period of CoRoT-7. The 0.8535 day period of CoRoT-7b planetary candidate was detected with an amplitude of 3.3 m s(-1). Most other frequencies, some with amplitudes larger than the CoRoT-7b signal, are most likely associated with activity. A second approach used harmonic decomposition of the rotational period and up to the first three harmonics to filter out the activity signal from radial velocity variations caused by orbiting planets. After correcting the radial velocity data for activity, two periodic signals are detected: the CoRoT-7b transit period and a second one with a period of 3.69 days and an amplitude of 4 m s(-1). This second signal was also found in the pre-whitening analysis. We attribute the second signal to a second, more remote planet CoRoT-7c. The orbital solution of both planets is compatible with circular orbits. The mass of CoRoT-7b is 4.8 +/- 0.8 (M(circle plus)) and that of CoRoT-7c is 8.4 +/- 0.9 (M(circle plus)), assuming both planets are on coplanar orbits. We also investigated the false positive scenario of a blend by a faint stellar binary, and this may be rejected by the stability of the bisector on a nightly scale. According to their masses both planets belong to the super-Earth planet category. The average density of CoRoT-7b is rho = 5.6 +/- 1.3 g cm(-3), similar to the Earth. The CoRoT-7 planetary system provides us with the first insight into the physical nature of short period super-Earth planets recently detected by radial velocity surveys. These planets may be denser than Neptune and therefore likely made of rocks like the Earth, or a mix of water ice and rocks.

Search for sterile neutrino mixing in the MINOS long-baseline experiment

A search for depletion of the combined flux of active neutrino species over a 735 km baseline is reported using neutral-current interaction data recorded by the MINOS detectors in the NuMI neutrino beam. Such a depletion is not expected according to conventional interpretations of neutrino oscillation data involving the three known neutrino flavors. A depletion would be a signature of oscillations or decay to postulated noninteracting sterile neutrinos, scenarios not ruled out by existing data. From an exposure of 3.18 x 10(20) protons on target in which neutrinos of energies between similar to 500 MeV and 120 GeV are produced predominantly as nu(mu), the visible energy spectrum of candidate neutral-current reactions in the MINOS far detector is reconstructed. Comparison of this spectrum to that inferred from a similarly selected near-detector sample shows that of the portion of the nu(mu) flux observed to disappear in charged-current interaction data, the fraction that could be converting to a sterile state is less than 52% at 90% confidence level (C. L.). The hypothesis that active neutrinos mix with a single sterile neutrino via oscillations is tested by fitting the data to various models. In the particular four-neutrino models considered, the mixing angles theta(24) and theta(34) are constrained to be less than 11 degrees and 56 degrees at 90% C. L., respectively. The possibility that active neutrinos may decay to sterile neutrinos is also investigated. Pure neutrino decay without oscillations is ruled out at 5.4 standard deviations. For the scenario in which active neutrinos decay into sterile states concurrently with neutrino oscillations, a lower limit is established for the neutrino decay lifetime tau(3)/m(3) > 2.1 x 10(-12) s/eV at 90% C.L.

Testing for large extra dimensions with neutrino oscillations

We consider a model where sterile neutrinos can propagate in a large compactified extra dimension giving rise to Kaluza-Klein (KK) modes and the standard model left-handed neutrinos are confined to a 4-dimensional spacetime brane. The KK modes mix with the standard neutrinos modifying their oscillation pattern. We examine former and current experiments such as CHOOZ, KamLAND, and MINOS to estimate the impact of the possible presence of such KK modes on the determination of the neutrino oscillation parameters and simultaneously obtain limits on the size of the largest extra dimension. We found that the presence of the KK modes does not essentially improve the quality of the fit compared to the case of the standard oscillation. By combining the results from CHOOZ, KamLAND, and MINOS, in the limit of a vanishing lightest neutrino mass, we obtain the stronger bound on the size of the extra dimension as similar to 1.0(0.6) mu m at 99% C.L. for normal (inverted) mass hierarchy. If the lightest neutrino mass turns out to be larger, 0.2 eV, for example, we obtain the bound similar to 0.1 mu m. We also discuss the expected sensitivities on the size of the extra dimension for future experiments such as Double CHOOZ, T2K, and NO nu A.

Regulating industrial forest concessions in Central Africa and South America

Tropical countries face special specific problems in implementing sustainable forest management (SFM). In many countries, questions are raised on whether tropical forests should be publicly, commonly or privately owned and managed in order to enhance sustainability. Other debates also focus on whether small-scale enterprises are better positioned than large-scale industrial concessions to reduce poverty and attain sustainable management. In countries where large tracts of forest are state-owned, concessions are viewed as a means of delivering services of public and collective interest through an association of private investment and public regulation. However, the success of an industrial concession model in countries with large forest resource endowment to achieve multiple goals such as sustainable forest management and local/regional development depends on two critical assumptions. First, forest functions and services should be managed and maintained as public goods. In many cases, additional uses - and corresponding rights - can take place alongside logging activities. Industrial concessions can be more efficient than other tenure models (such as community-based forest management and small-scale enterprises) in achieving SFM, add value to raw material and comply with growing environmental norms. This is especially the case in market-remote areas with low population density and poor infrastructure. Secondly, to achieve these different outcomes, any concession system needs to be monitored and regulated, especially in contexts dominated by asymmetrical information between regulating authorities and concessionaires. New institutional responses have recently been put forward in several countries, providing valuable materials to design a renewed policy mix which associates public and private incentives. This paper provides a survey of the experience of forest concessions in several Central African and South American countries. The concession system is examined in order to clarify the issues involved, the problems encountered, and what can be learned from the shared experience of these countries in the last decade. This paper argues that despite a sometimes patchy record, concessions can help promote SFM so long as they are packaged with a certain number of specific measures. (C) 2008 Elsevier B.V. All rights reserved.

Design and assembly of an experimental laboratory for the study of atmosphere-plant interactions in the system of fumigation chambers

An experimental laboratory was designed and assembled at the Botanical Institute of So Paulo, Brazil, in order to research atmosphere-plant interactions through the use of a system of fumigation chambers. A system of three ""closed"" fumigation chambers was designed to be used inside or outside the laboratory. The system was built to be used with a single pollutant or a mix of them. The innovation in this system is to allow chemical reactions inside the chambers that simulate atmospheric chemistry, especially photochemical processes involving high levels of ozone. Assessment of the performance and applicability of the system was based on the response of Nicotiana tabacum Bel W3 exposed to ozone produced alternatively by a generator and inside the chamber by reactions of its precursors. The results showed that the system can be well applied to the study of atmospheric chemistry interactions and the effects on plants.

Influence of EVA and acrylate polymers on some mechanical properties of cementitious repair mortars

In repair works of reinforced concrete, patch repairs tend to crack in the interfacial zone between the mortar and the old concrete. This occurs basically due to the high degree of restriction that acts on a patch repair. For this reason, the technology of patch repair needs to be the subject of a discussion involving professionals who work with projects, construction maintenance and mix proportioning of repair mortars. In the present work, a study is presented on the benefits that the ethylene vinyl acetate copolymer (EVA) and acrylate polymers can provide in the mix proportioning of a repair mortar with respect to compressive, tensile and direct-shear bond strength. The results indicated that the increase in bond strength and the reduction in the influence of the deficiency in Curing conditioning are the main contributions offered by the polymers studied here. (C) 2009 Elsevier, Ltd. All rights reserved.

Reconfigurable organisation to cope with unpredictable goals

The paper proposes a methodology and design rules for organisational structures facing higher necessity of rapidly reconfigure themselves to cope with unpredictable situations-new markets, new products, changing mix of production, problems in production process or flows etc. It implies changing and often conflictive criteria for production goals and for the allocation of work. The methodology was developed based on a large field action research and consulting. Their basis is the design of auto-reconfigurable working groups-or groups with variable geometry, depending on the events to face. (C) 2009 Elsevier B.V. All rights reserved.