Das Problem „Siebkrabben“ in der Garnelenfischerei

Along with consumption shrimp, brown shrimp fisheries also land some shrimp too small for human consumption which are sieved out on land and have to be degenerated (“crushed shrimp”). This share is recorded in German official statistics besides a third fraction called “industrial shrimp”. In view of the MSC certification processes, sustainable fishing and the fishermen’s voluntary obligation to - in future - limit the shares of “crushed shrimp”, landings data from 2010 have been analysed. Depending on seasons the goal of less than 20% of “crushed shrimp” in German landings was not met in several months in 2010, especially in August, when more than 40% of the landings contained more than the proposed amount. The processing procedures aboard the vessels are shortly discussed and the proposal is made to rather increase net selectivity than use wider sieves for the cooked fraction before landing. Cooking and processing small and later rejected shrimp is an uneconomic action. Reducing the share of “crushed shrimp” serves the idea of sustainable use of shrimp stocks as well as of sound economics.

Die Entwicklung des Aufwandes in der deutschen Garnelenfischerei und der Versuch einer Standardisierung der jährlichen Einheitsanlandungen (LPUE) zwischen 1976 und 2010

Brown shrimp is a fastgrowing, shortlived species, and all attempts to use stock assessment methodologies typically applied to other fisheries are usually unsuccessful. Here landings per unit effort data (LPUE) for the German fleet based on a number of effort metrics are used as indices of stock size. Their utility in relation to describing stock development and fisheries management is discussed. LPUE estimates indicate that stock sizes between 1976 and 1989 were relatively stable. In 1990, the lowest reported landings of brown shrimps in Germany coincided with severe economic problems for the shrimp fisheries. From 1990 to 2010 standardised annual indices show that both landings and LPUE estimates have increased at variable rates suggesting large stocks of brown shrimps in recent years. This is discussed in relation to the positive effects of reduced predator abundance and favourable climatic factors.

Los animales acuáticos en San Ambrosio: simbolismo cristiano e ictiología

[ES] El presente trabajo examina los principales procedimientos de que se sirve san Ambrosio en la homilía de su «Hexameron» dedicada a los animales acuáticos. Se destacan aquellos desarrollos originales con respecto de su principal modelo, Basilio de Cesarea, en especial las ampliaciones de las caracterizaciones de algunos animales, y se proponen ejemplos de su pervivencia en otros tratadistas medievales. El público diverso a quien se dirigía este sermón de cuaresma explica tanto esas digresiones muchas veces pintorescas como otras más conceptuales, en las que el simbolismo cristiano se apropia de las bases de los naturalistas clásicos, desde Aristóteles a Plinio.

Alexandre Herculano: o velho lobo intelectual de Portugal

Alexandre Herculano foi uma figura muito importante na História de Portugal. Primeiramente como historiador, recolhendo materiais que continham a História da Nação e que serviu como estudo para a preservação e divulgação de um passado glorioso. Como intelectual, engajou-se na política e assuntos sociais em benefício da nação portuguesa. Escrevendo e publicando artigos em importantes jornais e revistas da época, ou seja, o século XIX, sua figura identifica-se com a de um intelectual. Como tal, denunciou e alertou o povo sobre seus principais direitos e deveres como cidadãos portugueses. Sua grande preocupação também era em relação à educação porque, segundo ele, Portugal estava atrasado em relação a outros países europeus. Descrever Herculano como intelectual de Portugal é uma das propostas deste trabalho

Double proximity effect in lateral S-NF-S junctions

We investigate planar Josephson junctions where the intermediate spacer between the two superconductors is an hybrid structure made by a normal metal and a ferromagnet. The different behaviors of the S-N-S junctions with thicknesses of 50 nm in both Cu and Nb layers, and S-N/F-S junctions with 10 nm of Co, 50 nm of Cu and 50 nm of Nb are studied. In this way, we analyze the influence of the ferromagnetic exchange interaction on the proximity effect. A dramatic supression of the josephson critical current of the Nb-(Cu/Co)-Nb junctions is observed. We believe that the reason for this is due to the length scale of the superconducting correlations of the electrons and holes of the weak link is larger than the thickness of Cu/Co bilayer.

PHILIPPE ROGIER (c.1561-1596): MISSA INCLITA STIRPS JESSE. A CRITICAL AND PERFORMING EDITION WITH PERFORMANCE COMMENTARY

The dissertation comprises two parts: (a) a musical edition and (b) a performance given on 3 July, 2008 of Philippe Rogier’s Missa Inclita stirps Jesse. The dissertation explores some of the editorial decisions required, how the demands of performers and musicologists differ, and whether they can be reconciled in one single edition. The commentary explains the preparation and realization of the edition. A video recording of the concert performance is attached to the dissertation. The Mass: The Missa Inclita stirps Jesse was published in Madrid in 1598 in a collection entitled Missae Sex. The mass setting is for four voices, except the Agnus Dei, which is for five, and is based on musical material in the motet Inclita stirps Jesse by Jacobus Clemens non Papa (c. 1510-15 – c.1556-6). Rogier’s choice and use of musical material from the motet (published in 1549) are discussed in the dissertation. The Edition: The edition is made from a microfilm copy of the Missae Sex held in the Biblioteca del Conservatorio de Musica “Giuseppe Verdi” in Milan. The Missae Sex was originally dedicated to King Philip II of Spain (1527-1598, reg. 1556-1598), whom Rogier had served as chorister and then maestro de capilla. Both Rogier and King Philip died before the volume was ready for publication. One of Rogier’s pupils, Géry de Ghersem, prepared the volume, which was printed in 1598, dedicated to King Philip III. The Performance: The mass was performed at a concert of Spanish Renaissance music in St. Matthew’s Cathedral, Washington, DC, on 3 July 2008, sung by the ensemble Orpheus directed by Philip Cave as part of the Chorworks summer workshop entitled Kings and Conquistadors: Music of Old and New Spain.

Assessment of the origin and stability of Nifedipine polymorph IV by differential scanning calorimetry (DSC)

Purpose. To examine the thermal transition(s) between different polymorphic forms of Nifedipine and to define experimental conditions that lead to the generation of polymorph IV. Methods. Experiments were performed using a DSC 823e (Mettler Toledo). Nifedipine exists in four polymorphic forms, as well as an amorphous state. Examination of Nifedipine was conducted using the following method(s): cycle 1: 25ºC to 190ºC, 190ºC to 25ºC (formation of amorphous Nifedipine); cycle 2: 25ºC to X (60,70,80...150ºC), X to 25ºC; cycle 3: 25ºC to 190ºC and holding isothermally for 5 min between cycles (heating/cooling rate of 10ºC/min). Results. The amorphous state Nifedipine can sustain heating up to 90ºC without significant changes in its composition. Cycle 2 of amorphous material heated up to 90ºC shows only the glass transition at ~44ºC. In cycle 3 of the same material, a glass transition has been recorded at ~44ºC, followed by two exotherms (~100 and ~115ºC (crystallisation of polymorph III and II, respectively) and an endotherm (169ºC (melting of polymorphs I/II)). Samples that have been heated to temperatures between 100ºC and 120ºC in the second cycle showed a glass transition at ~44ºC and an additional exotherm at ~95ºC (crystallisation of polymorph III) on cooling a exotherm was observed at ~40ºC (crystallisation of polymorph IV). The same material showed no glass transition in cycle 3 but an endotherm at around 62ºC (melting of polymorph IV) an exotherm (~98ºC) and an endotherm (169ºC) melting of polymorph I/II. Heating the sample to a temperatures greater than 130ºC in cycle two results in a glass transition at ~44ºC, and two exotherms at ~102 and 125ºC (crystallisation of polymorphs III and I, respectively). Conclusions. DSC data suggests that polymorph IV can only be produced from amorphous or polymorph III samples. The presence of polymorph I or II drives the conversion of the less stable polymorphic form IV into the most stable form, I. Although form IV of Nifedipine can easily be created, following defined experimental conditions, it may only coexist with amorphous or polymorph III states. When polymorphs I and II are present in the sample polymorph IV cannot be etected.

HPLC-ESI-MS method development for the elucidation of nicardipine degradation products

Purpose: Nicardipine is a member of a family of calcium channel blockers named dihydropiridines that are known to be photolabile and may cause phototoxicity. It is therefore vital to develop analytical method which can study the photodegradation of nicardipine. Method: Forced acid degradation of nicardipine was conducted by heating 12 ml of 1 mg/ml nicardipine with 3 ml of 2.5 M HCl for two hours. A gradient HPLC medthod was developed using Agilent Technologies 1200 series quaternary system. Separation was achieved with a Hichrome (250 x 4.6 mm) 5 μm C18 reversed phase column and mobile phase composition of 70% A(100%v/v water) and 30% B(99%v/v acetonitrile + 1%v/v formic acid) at time zero, composition of A and B was then charged to 60%v/v A;40%v/v B at 10minutes, 50%v/v A; 50%v/v B at 30minutes and 70%v/v A; 30%v/v B at 35minutes. 20μl of 0.8mg/ml of nicardipine degradation was injected at room temperature (25oC). The gradient method was transferred onto a HPLC-ESI-MS system (HP 1050 series - AQUAMAX mass detector) and analysis conducted with an acid degradation concentration of 0.25mg/ml and 20μl injection volume. ESI spectra were acquired in positive ionisation mode with MRM 0-600 m/z. Results: Eleven nicardipine degradation products were detected in the HPLC analysis and the resolution (RS) between the respective degradants where 1.0, 1.2, 6.0, 0.4, 1.7, 3.7, 1.8, 1.0, and 1.7 respectively. Nine degradation products were identified in the ESI spectra with the respective m/z ratio; 171.0, 166.1, 441.2, 423.2, 455.2, 455.2, 331.1, 273.1, and 290.1. The possible molecular formulae for each degradants were ambiguously determined. Conclusion: A sensitive and specific method was developed for the analysis of nicardipine degradants. Method enables detection and quantification of nicardipine degradation products that can be used for the study of the kinetics of nicardipine degradation processes.

Assessment of the degradation of Aspirin by Differential Scanning Calorimetry (DSC)

Purpose. To study thermal stability of Aspirin and define thermal events that are associated with the thermal degradation of aspirin. Methods. Experiments were performed using a DSC 823e (Mettler Toledo, Swiss). Aspirin is prone to thermal degradation upon exposure to high temperatures. The melting point of aspirin is 140.1±0.4ºC (DSC). Aspirin has been examined by heating samples to 120ºC, 155ºC and 185ºC with subsequent cooling to -55ºC and a final heating to 155ºC. Although different heating and cooling ranges have been used, only results obtained at a rate of 10ºC/min will be presented. All runs where conducted in hermetically sealed pans. Results. Upon heating the sample to 120ºC no significant thermal event can be detected. After cooling the sample and reheating a glass transition can be observed at ~-8ºC, followed by the melting of aspirin at ~139ºC. By heating the sample to 155ºC melting of aspirin has been detected at ~139ºC. On cooling and subsequent heating a glass transition occurs at ~-32ºC, together with a broad crystallisation (onset at ~38ºC and peak maximum at ~57ºC) followed by a broad melting with an onset at 94ºC and peak maximum at ~112ºC. Finally, by heating the sample to 185ºC melting at ~ 139ºC was observed, and upon cooling and reheating a glass transition was detected at ~-26ºC and no further events could be recorded. Conclusions. This research demonstrates that the degradation steps of Aspirin depend on the thermal treatment. The main degradation products of different thermal treatments are currently unknown it is clear that acetic acid, which is one of the degradation products, acts as an antiplasticiser by lowering the glass transition temperature. In addition, due to the presence of the degradation products in liquid form (observed by hot stage microscopy), Aspirin is still present in the sample and recrystallises during the second heating step and melts at much lower temperatures.

The role of space charge formation in the generation of thermally stimulated current (TSC) spectroscopy data for a model amorphous drug system

Thermally stimulated current (TSC) spectroscopy is attracting increasing attention as a means of materials characterization, particularly in terms of measuring slow relaxation processes in solid samples. However, wider use of the technique within the pharmaceutical field has been inhibited by difficulties associated with the interpretation of TSC data, particularly in terms of deconvoluting dipolar relaxation processes from charge distribution phenomena. Here, we present evidence that space charge and electrode contact effects may play a significant role in the generation of peaks that have thus far proved difficult to interpret. We also introduce the use of a stabilization temperature in order to control the space charge magnitude. We have studied amorphous indometacin as a model drug compound and have varied the measurement parameters (stabilization and polarization temperatures), interpreting the changes in spectral composition in terms of charge redistribution processes. More specifically, we suggested that charge drift and diffusion processes, charge injection from the electrodes and high activation energy charge redistribution processes may all contribute to the appearance of shoulders and 'spurious' peaks. We present recommendations for eliminating or reducing these effects that may allow more confident interpretation of TSC data.

Trade credit linkages along the supply chain: evidence for the Italian textile sector

We examine the trade credit linkages among firms within a supply chain to reckon the effect of such linkages on the propagation of liquidity shocks from downstream to upstream firms. We choose a sample appropriate for this task, consisting of a large data set of Italian firms from the textile industry, a well known example of a comprehensive manufacturing cluster featuring a large number of small and specialized firms at each level of the supply chain. The results of the analysis indicate that the level of trade credit that firms provide to their suppliers is positively related to the level of trade credit granted to their clients: when the level of trade credit granted to clients divided by sales goes up by 1, the level of trade credit provided to suppliers divided by cost-of goods-sold goes up by an amount that varies between 0,22 and 0,52. Since all firms along the chain are linked by trade credit relationships, an increase in the level of trade credit granted by wholesalers generates a liquidity cascade throughout the chain. We designate the overall increase in the level of trade credit among all firms in the chain as a result of a unitary impulse in the level of trade credit granted by wholesalers as the multiplier effect of trade credit for the industry chain. We estimate such multiplier to vary between 1.28 and 2.04. We also investigate the effect of final demand on the level of trade credit sourced by firms at various levels of the chain and, in particular, whether such effect is amplified for firms further up in the chain as a result of liquidity propagation via trade credit linkages. We uncover evidence of such amplification when the links of liquidity transmission along the chain are individually modeled and estimated. An unitary increase in wholesalers’ sales is found to produce an effect on trade payables among firms at the top of the chain (i.e., Preparers and Spinners) that is more than twice as big as the corresponding effect among firms at the bottom of the chain (i.e., Wholesalers).

Giovanni Battista Montano as Architectural Draughtsman: Recording the Past and Designing the Future

Giovanni Battista Montano (1534-1621), who was born in Milan and trained as a woodcarver, relocated permanently to Rome in the early 1570s where his interest in sculpting was replaced by intense study of the city’s antique monuments and ruins. Although Montano carried out several sculptural and architectural projects during his time in Rome, it is his surviving corpus of drawings that testifies to his passion of exploring ancient architecture through the medium of drawing. While Montano was not famous during his lifetime, a large body of his intriguing designs became celebrated and widely circulated after his death thanks to the 1624 publication of Montano’s designs by his loyal pupil, Giovanni Battista Soria. Montano’s lifelong work differs from virtually all of his predecessors and contemporaries in its “fantastical” and ornamental nature. This thesis explores Montano’s artistic training as it relates to his later interest in imaginatively reconstructing antique buildings, along with his disregard for archaeological or historical accuracy. The subject matter upon which Montano focused is discussed, along with his objective in creating a large corpus of half-historical, half-invented drawings. His drawing techniques are explored with specific reference to the largest group of extant Montano drawings, today housed in Sir John Soane’s Museum, London, England, and also in reference to three original Montano drawings in the Centre Canadien d’Architecture/Canadian Centre for Architecture, Montréal. Also explored is the legacy and impact of Montano’s drawings and the later publications of his designs on the works of Roman Baroque architects, specifically Borromini and Bernini. This thesis ultimately attempts to understand the impact of the intellectual and artistic environment surrounding Montano in late sixteenth and early seventeenth century Rome, his drawing techniques, his choice of subject matter, and the reception that his unique works received from contemporary artists and intellectuals, along with those of the following generation.

Una revisión de la Cadena Datos-Información-Conocimiento desde el Pragmatismo de Peirce

La Cadena Datos-Información-Conocimiento (DIC), denominada “Jerarquía de la Información” o “Pirámide del Conocimiento”, es uno de los modelos más importantes en la Gestión de la Información y la Gestión del Conocimiento. Por lo general, la estructuración de la cadena se ha ido definiendo como una arquitectura en la que cada elemento se levanta sobre el elemento inmediatamente inferior; sin embargo no existe un consenso en la definición de los elementos, ni acerca de los procesos que transforman un elemento de un nivel a uno del siguiente nivel. En este artículo se realiza una revisión de la Cadena Datos-Información-Conocimiento examinando las definiciones más relevantes sobre sus elementos y sobre su articulación en la literatura, para sintetizar las acepciones más comunes. Se analizan los elementos de la Cadena DIC desde la semiótica de Peirce; enfoque que nos permite aclarar los significados e identificar las diferencias, las relaciones y los roles que desempeñan en la cadena desde el punto de vista del pragmatismo. Finalmente se propone una definición de la Cadena DIC apoyada en las categorías triádicas de signos y la semiosis ilimitada de Peirce, los niveles de sistemas de signos de Stamper y las metáforas de Zeleny.