990 resultados para MUCOLIPIDOSIS TYPE-IV
Resumo:
The addition of calcium chloride eletrolyte to sodium polyphosphate solutions lead to Calcium polyphosphate coacervates. The effects of a thermal treatment were investigated with the objective to increase the relative stability of the obtained material. Thermogravimetry analysis indicates that coacervates became less hydrophilic and more thermally stable after the thermal treatment. Crystallization was identified through differential scanning calorimetry and X-ray diffraction. Morphological changes were observed after the thermal treatment by scanning electron microscopy. N-2 adsorption-desorption isotherms suggest that both materials, thermally treated or not, display type IV isotherms, low superficial area and mesoporous structure. Stability experiments in solutions at different pH values show that the thermally treated calcium polyphosphate is relatively more stable than the non-treated coacervate.
Resumo:
The salivary glands of termites are composed of several secretory acini connected by ducts. These glands, in the Brazilian termite Serritermes serrifer, were examined through the electron microscope. The ultrastructure of worker salivary acinus revealed central ductule cells and four different types of cells. Cells of type I contain an abundance of electron-lucid vacuoles of various sizes which fuse to form enormous vacuolar structures that fill up most of the cell. Cells of type II are narrow cells in which the secretion is contained in small clear vacuoles of approximately equal diameter. Both of these cellular types have numerous Golgi bodies and rough endoplasmic reticulum. Type III or parietal cells have an apical plasma membrane deeply infolded and lined by microvilli. This type of cell is located in the acinar periphery and occurs in pairs. Cells of type IV are completely filled with electrondense secretion. The secretory granules can be small in some cells or large and similar to fingerprints in others. This is the first report of the occurrence of these spiral or concentric rings of dense material in the salivary gland of Isoptera.
Resumo:
Objective: The purpose of this study was to compare the accuracy of two working cast fabrication techniques using strain-gauge analysis. Methods: Two working cast fabrication methods were evaluated. Based on a master model, 20 working casts were fabricated by means of an indirect impression technique using polyether after splinting the square transfer copings with acrylic resin. Specimens were assigned to 2 groups (n=10): Group A (GA): type IV dental stone was poured around the abutment analogs in the conventional way; Group B (GB), the dental stone was poured in two stages. Spacers were used over the abutment analogs (rubber tubes) and type IV dental stone was poured around the abutment analogs in the conventional way. After the stone had hardened completely, the spacers were removed and more stone was inserted in the spaces created. Six strain-gauges (Excel Ltd.), positioned in a cast bar, which was dimensionally accurate (perfect fit) to the master model, recorded the microstrains generated by each specimen. Data were analyzed statistically by the variance analysis (ANOVA) and Tukey's test (α= 5%). Results: The microstrain values (με) were (mean±SD): GA: 263.7±109.07με, and GB: 193.73±78.83με. Conclusion: There was no statistical difference between the two methods studied.
Resumo:
The present study examined the changes in prostatic stroma of old gerbils (18 months) submitted to orchiectomy associated or not with steroidal blockades. Animals were divided into six groups, all surgically castrated except the control group composed of intact animals. The other two controls were formed by castrated animals, one that received and one that did not receive the drug vehicle. In the experimental groups, doses of flutamide (10 mg/kg/day) and/or tamoxifen (1 mg/kg/48 h) were applied for 1, 3, 7 and 30 days post-castration. The methodologies involved were: morphological (HE, Gömöri reticulin, Picrosirius-hematoxylin), immunohistochemical (tenascin, type IV collagen) and ultrastructural analyses. Gradually, the epithelial compartment was significantly exceeded in volume by the stromal compartment, characterizing regression but not atrophy of the gland. The smooth muscle cell frequency increased significantly after 30 days and participated effectively in the stromal increase. Large collagen I and tenascin deposits in the subepithelial region were a hallmark of prostatic acini in the experimental groups up to 7 days, while in the 30-day group these elements practically disappear. Fibroblasts with reactive aspect, changes in basement membrane structure and maintenance and/or increase of blood vessels were also associated with treatments. These results showed, in part, the sensitivity of stromal components to suppressed hormones and favored the creation of a differentiated glandular microenvironment. Therefore, the data suggest the importance of considering aging when analyzing aspects of prostatic regression between rodents and humans after hormonal ablation. © 2011 Elsevier Masson SAS. All rights reserved.
Resumo:
Palatal rugoscopy, or palatoscopy, is the process by which human identification can be obtained by inspecting the transverse palatal rugae inside the mouth. Aim: This study evaluated a digital method for human identification using palatoscopy, by comparing photographs of the palate against the images of cast models of the maxilla photographed with and without highlighting of the palatal rugae. Methods: Condensation silicone impressions were made from the upper arches of 30 adult subjects of both genders and their palates were then photographed. The first impression was made with heavy silicone, the second impression with light silicone, and then the models were cast in improved type IV dental stone. The casts were photographed, the palatal rugae of each one were highlighted with a pencil, and then the models were photographed again. Using a free image-editing software, the digital photographs were overlapped over the images of the palatal rugae of the models with and without highlighting of the palatal rugae, in order to identify the pairs. Results: The result of overlapping the digital photographs with the images of the models without highlighted palatal rugae resulted in 90% positive identification. For the overlapping of the digital photographs with the images of models with highlighted palatal rugae, there was 100% positive identification. Conclusions: The digital method evaluated in this study was proven effective for human identification.
Resumo:
Introduction: Laser hair removal is becoming an increasingly popular alternative to traditional methods such as shaving, waxing, among other methods. Semiconductor diode lasers are considered the most efficient light sources available and are especially well suited for clinical applications including hair reduction. The effectiveness of laser hair reduction depends on many variables, including the skin type of the patient. Material and Methods: A patient with Fitzpatrick Skin Type IV was submitted to laser hair removal of the arms with a high-power diode laser system with long pulses with a wavelength of 800 nm, a fluence of 40 J/cm2 and a pulse width of 20 ms. A 12-month follow-up assessment was performed and included photography and questionnaire. Results: Hypopigmentation was observed after a single laser hair removal section. After 6 months with the area totally covered, a gradual suntan with a sun screen lotion with an SPF of 15 was prescribed by the dermatologist. After 12 months of the initial treatment, a complete recovery of the hypopigmentation was achieved. Conclusion: Although a safe procedure, lasers for hair removal may be associated with adverse side effects including undesired pigment alterations. Before starting a laser hair removal treatment, patients seeking the eradication of hair should be informed that temporary, and possibly permanent, pigmentary changes may occur. © 2013 Informa UK, Ltd.
Resumo:
Even though community-acquired methicillin resistant Staphylococcus aureus (CA-MRSA) was described a decade ago, reports from Brazil are scarce and cases occurred in large urban centers. We report MRSA sepsis in a 16-year-old male from a small town and who had no history of exposure to healthcare or recent travel. After trauma during a soccer match, he presented swelling in the right thigh, which evolved in a month to cellulitis complicated by local abscess, orchitis and pneumonia. The patient presented severe sepsis, with fever and respiratory failure. Laboratory findings included blood leukocyte counts above 40,000/mm3 and thrombocytopenia. He was submitted to mechanical ventilation and therapy with vancomycin and imipenem. He had a slow but favorable response to therapy and was discharged after six weeks of hospitalization. MRSA grew from blood cultures and respiratory aspirates obtained before antimicrobial therapy. The isolate belonged to sequence type 5, spa type t311, harbored SCCmec type IV and genes for Panton-Valentine leukocidin and Enterotoxin A. The pulsed-field gel electrophoresis pattern was distinct from North American classic CA-MRSA clones. However, the sequence type and the spa type revealed that the clone belong to the same clonal complex isolated in Argentina. This is the first CA-MRSA infection reported in that region, with significant epidemiologic and clinical implications. © 2013 Elsevier Inc.
Resumo:
Methicillin-resistant Staphylococcus aureus (MRSA) poses a threat for patients in burn units. Studies that mix epidemiological designs with molecular typing may contribute to the development of strategies for MRSA control. We conducted a study including: molecular characterization of Staphylococcal Chromosome Cassette mecA (SCCmec), strain typing with pulsed field gel electrophoresis (PFGE) and detection of virulence genes, altogether with a case-case-control study that assessed risk factors for MRSA and for methicillin-susceptible S. aureus (MSSA), using S. aureus negative patients as controls. Strains were collected from clinical and surveillance cultures from October 2006 through March 2009. MRSA was isolated from 96 patients. Most isolates (94.8%) harbored SCCmec type III. SCCmec type IV was identified in isolates from four patients. In only one case it could be epidemiologically characterized as community-associated. PFGE typing identified 36 coexisting MRSA clones. When compared to MSSA (38 isolates), MRSA isolates were more likely to harbor two virulence genes: tst and lukPV. Previous stay in other hospital and admission to Intensive Care Unit were independent risk factors for both MRSA and MSSA, while the number of burn wound excisions was significantly related with the former (OR = 6.80, 95%CI = 3.54-13.07). In conclusion, our study found polyclonal endemicity of MRSA in a burn unit, possibly related to importing of strains from other hospitals. Also, it pointed out to a role of surgical procedures in the dissemination of MRSA strains. © 2013 Elsevier Ltd and ISBI. All rights reserved.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Odontologia Restauradora - ICT
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)