Can REDD+ reconcile local priorities and needs with global mitigation benefits? lessons from Angai Forest, Tanzania

The scope of the reducing emissions from deforestation and forest degradation (REDD) mechanism has broadened REDD+ to accommodate different country interests such as natural forests, protected areas, as well as forests under community-based management. In Tanzania the REDD+ mechanism is still under development and pilot projects are at an early stage. In this paper, we seek to understand how local priorities and needs could be met in REDD+ implementation and how these expectations match with global mitigation benefits. We examine the local priorities and needs in the use of land and forest resources in the Angai Villages Land Forest Reserve (AVLFR) in the Liwale District of Lindi Region in Tanzania. Primary data was collected in two villages, Mihumo and Lilombe, using semistructured key informant interviews and participatory rural appraisal methods. In addition, the key informant interviews were conducted with other village, district, and national level actors, as well as international donors. Findings show that in the two communities REDD+ is seen as something new and is generating new expectations among communities. However, the Angai villagers highlight three key priorities that have yet to be integrated into the design of REDD+: water scarcity, rural development, and food security. At the local level improved forest governance and sustainable management of forest resources have been identified as one way to achieve livelihood diversification. Although the national goals of REDD+ include poverty reduction, these goals are not necessarily conducive to the goals of these communities. There exist both structural and cultural limits to the ability of the Angai villages to implement these goals and to improve forestry governance. Given the vulnerability to current and future climate variability and change it will be important to consider how the AVLFR will be managed and for whose benefit?

Evaluation of field wetlands for mitigation of diffuse pollution from agriculture: sediment retention, cost and effectiveness

Diffuse pollution, and the contribution from agriculture in particular, has become increasingly important as pollution from point sources has been addressed by wastewater treatment. Land management approaches, such as construction of field wetlands, provide one group of mitigation options available to farmers. Although field wetlands are widely used for diffuse pollution control in temperate environments worldwide, there is a shortage of evidence for the effectiveness and viability of these mitigation options in the UK. The Mitigation Options for Phosphorus and Sediment Project aims to make recommendations regarding the design and effectiveness of field wetlands for diffuse pollution control in UK landscapes. Ten wetlands have been built on four farms in Cumbria and Leicestershire. This paper focuses on sediment retention within the wetlands, estimated from annual sediment surveys in the first two years, and discusses establishment costs. It is clear that the wetlands are effective in trapping a substantial amount of sediment. Estimates of annual sediment retention suggest higher trapping rates at sandy sites (0.5–6 t ha�1 yr�1), compared to silty sites (0.02–0.4 t ha�1 yr�1) and clay sites (0.01–0.07 t ha�1 yr�1). Establishment costs for the wetlands ranged from £280 to £3100 and depended more on site specific factors, such as fencing and gateways on livestock farms, rather than on wetland size or design. Wetlands with lower trapping rates would also have lower maintenance costs, as dredging would be required less frequently. The results indicate that field wetlands show promise for inclusion in agri-environment schemes, particularly if capital payments can be provided for establishment, to encourage uptake of these multi-functional features.

The AVOID programme’s new simulations of the global benefits of stringent climate change mitigation

Quantitative simulations of the global-scale benefits of climate change mitigation are presented, using a harmonised, self-consistent approach based on a single set of climate change scenarios. The approach draws on a synthesis of output from both physically-based and economics-based models, and incorporates uncertainty analyses. Previous studies have projected global and regional climate change and its impacts over the 21st century but have generally focused on analysis of business-as-usual scenarios, with no explicit mitigation policy included. This study finds that both the economics-based and physically-based models indicate that early, stringent mitigation would avoid a large proportion of the impacts of climate change projected for the 2080s. However, it also shows that not all the impacts can now be avoided, so that adaptation would also therefore be needed to avoid some of the potential damage. Delay in mitigation substantially reduces the percentage of impacts that can be avoided, providing strong new quantitative evidence for the need for stringent and prompt global mitigation action on greenhouse gas emissions, combined with effective adaptation, if large, widespread climate change impacts are to be avoided. Energy technology models suggest that such stringent and prompt mitigation action is technologically feasible, although the estimated costs vary depending on the specific modelling approach and assumptions.

Exploring socioeconomic impacts of forest based mitigation projects: Lessons from Brazil and Bolivia

This paper aims to contribute new insights globally and regionally on how carbon forest mitigation contributes to sustainable development in South America. Carbon finance has emerged as a potential policy option to tackling global climate change, degradation of forests, and social development in poor countries. This paper focuses on evaluating the socioeconomic impacts of a set of forest based mitigation pilot projects that emerged under the United Nations Framework Convention on Climate Change. The paper reviews research conducted in 2001–2002, drawing from empirical data from four pilot projects, derived from qualitative stakeholder interviews, and complemented by policy documents and literature. Of the four projects studied three are located in frontier areas, where there are considerable pressures for conversion of standing forest to agriculture. In this sense, forest mitigation projects have a substantial role to play in the region. Findings suggest however, that all four projects have experienced cumbersome implementation processes specifically, due to weak social objectives, poor communication, as well as time constraints. In three out of four cases, stakeholders highlighted limited local acceptance at the implementation stages. In the light of these findings, we discuss opportunities for implementation of future forest based mitigation projects in the land use sector.

Regional climate change mitigation with crops: context and assessment

The intention of this review is to place crop albedo biogeoengineering in the wider picture of climate manipulation. Crop biogeoengineering is considered within the context of the long-term modification of the land surface for agriculture over several thousand years. Biogeoengineering is also critiqued in relation to other geoengineering schemes in terms of mitigation power and adherence to social principles for geoengineering. Although its impact is small and regional, crop biogeoengineering could be a useful and inexpensive component of an ensemble of geoengineering schemes to provide temperature mitigation. The method should not detrimentally affect food security and there may even be positive impacts on crop productivity, although more laboratory and field research is required in this area to understand the underlying mechanisms.

Cost effectiveness of mitigation measures for water security and water quality in the River Thames catchment: impacts of changing climate, land use and water scarcity

The catchment of the River Thames, the principal river system in southern England, provides the main water supply for London but is highly vulnerable to changes in climate, land use and population. The river is eutrophic with significant algal blooms with phosphorus assumed to be the primary chemical indicator of ecosystem health. In the Thames Basin, phosphorus is available from point sources such as wastewater treatment plants and from diffuse sources such as agriculture. In order to predict vulnerability to future change, the integrated catchments model for phosphorus (INCA-P) has been applied to the river basin and used to assess the cost-effectiveness of a range of mitigation and adaptation strategies. It is shown that scenarios of future climate and land-use change will exacerbate the water quality problems, but a range of mitigation measures can improve the situation. A cost-effectiveness study has been undertaken to compare the economic benefits of each mitigation measure and to assess the phosphorus reductions achieved. The most effective strategy is to reduce fertilizer use by 20% together with the treatment of effluent to a high standard. Such measures will reduce the instream phosphorus concentrations to close to the EU Water Framework Directive target for the Thames.

Exploring broad mitigation strategies for pollinators in agroecosystems

An increasing world population has put great pressure on agricultural landscapes to continually increase in efficiency whilst avoiding negative impacts on the environment. Protected areas, mass flower crops and agri-environment schemes have been identified as three broad complimentary mitigation strategies to protect and conserve pollinators. Each strategy differs temporarily and spatially but all offer significant benefits to pollinators. It is vital we identify the value of these mitigation strategies and their complementarity if we are to tailor landscape management for optimal results and work towards safeguarding our pollination service.

Energy savings in buildings or UHI mitigation? Comparison between green roofs and cool roofs

The intensification of the Urban Heat Island effect (UHI) is a problem that involves several fields, and new adequate solutions are required to mitigate its amplitude. The construction sector is strictly related with this phenomenon; in particular, roofs are the envelope components subject to the highest solar irradiance, hence any mitigation strategy should start from them and involve their appropriate design process. For this purpose, cool materials, i.e. materials which are able to reflect a large amount of solar radiation and avoid overheating of building surfaces have been deeply analyzed in the last years both at building and urban scales, showing their benefits especially in hot climates. However, green roofs also represent a possible way to cope with UHI, even if their design is not straightforward and requires taking into account many variables, strictly related with the local climatic conditions. In this context, the present paper proposes a comparison between cool roofs and green roofs for several Italian cities that are representative of different climatic conditions. In search of the most effective solution, the answers may be different depending on the perspective that leads the comparison, i.e. the need to reduce the energy consumption in buildings or the desire to minimize the contribution of the UHI effect.

Design, implementation and interpretation of in vitro batchculture experiments to assess enteric methane mitigation in ruminants—a review

In vitro fermentation techniques (IVFT) have been widely used to evaluate the nutritivevalue of feeds for ruminants and in the last decade to assess the effect of different nutritionalstrategies on methane (CH4) production. However, many technical factors may influencethe results obtained. The present review has been prepared by the ‘Global Network’ FACCE-JPI international research consortium to provide a critical evaluation of the main factorsthat need to be considered when designing, conducting and interpreting IVFT experimentsthat investigate nutritional strategies to mitigate CH4emission from ruminants. Given theincreasing and wide-scale use of IVFT, there is a need to critically review reports in the lit-erature and establish what criteria are essential to the establishment and implementationof in vitro techniques. Key aspects considered include: i) donor animal species and numberof animal used, ii) diet fed to donor animals, iii) collection and processing of rumen fluidas inoculum, iv) choice of substrate and incubation buffer, v) incubation procedures andCH4measurements, vi) headspace gas composition and vii) comparability of in vitro andin vivo measurements. Based on an evaluation of experimental evidence, a set of techni-cal recommendations are presented to harmonize IVFT for feed evaluation, assessment ofrumen function and CH4production.

The distributional and nutritional impacts and mitigation potential of emission-based food taxes in the UK

Agriculture and food production are responsible for a substantial proportion of greenhouse gas emissions. An emission based food tax has been proposed as one option to reduce food related emissions. This study introduces a method to measure the impacts of emission based food taxes at a household level which involves the use of data augmentation to account for the fact that the data record purchases and not consumption. The method is applied to determine the distributional and nutritional impacts of an emission based food tax across socio-economic classes in the UK. We find that a tax of £2.841/tCO2e on all foods would reduce food related emissions by 6.3% and a tax on foods with above average levels of emissions would reduce emissions by 4.3%. The tax burden falls disproportionately on households in the lowest socio-economic class because they tend to spend a larger proportion of their food expenditure on emission intensive foods and because they buy cheaper products and therefore experience relatively larger price increases.

Designing single event upset mitigation techniques for large SRAM-Based FPGA components

This thesis presents the study and development of fault-tolerant techniques for programmable architectures, the well-known Field Programmable Gate Arrays (FPGAs), customizable by SRAM. FPGAs are becoming more valuable for space applications because of the high density, high performance, reduced development cost and re-programmability. In particular, SRAM-based FPGAs are very valuable for remote missions because of the possibility of being reprogrammed by the user as many times as necessary in a very short period. SRAM-based FPGA and micro-controllers represent a wide range of components in space applications, and as a result will be the focus of this work, more specifically the Virtex® family from Xilinx and the architecture of the 8051 micro-controller from Intel. The Triple Modular Redundancy (TMR) with voters is a common high-level technique to protect ASICs against single event upset (SEU) and it can also be applied to FPGAs. The TMR technique was first tested in the Virtex® FPGA architecture by using a small design based on counters. Faults were injected in all sensitive parts of the FPGA and a detailed analysis of the effect of a fault in a TMR design synthesized in the Virtex® platform was performed. Results from fault injection and from a radiation ground test facility showed the efficiency of the TMR for the related case study circuit. Although TMR has showed a high reliability, this technique presents some limitations, such as area overhead, three times more input and output pins and, consequently, a significant increase in power dissipation. Aiming to reduce TMR costs and improve reliability, an innovative high-level technique for designing fault-tolerant systems in SRAM-based FPGAs was developed, without modification in the FPGA architecture. This technique combines time and hardware redundancy to reduce overhead and to ensure reliability. It is based on duplication with comparison and concurrent error detection. The new technique proposed in this work was specifically developed for FPGAs to cope with transient faults in the user combinational and sequential logic, while also reducing pin count, area and power dissipation. The methodology was validated by fault injection experiments in an emulation board. The thesis presents comparison results in fault coverage, area and performance between the discussed techniques.

Funding social sector activity in Brazil: a case study analysis of agency risk incidence and mitigation

Empresas e organizações sociais têm um papel cada vez mais importante no mercado brasileiro. Essas organizações - sejam elas com ou sem fins lucrativos –têm como objetivocausar um profundo e positivo impacto social.Ambas enfrentamtambém o mesmo desafio: financiar as suas operações. Recentemente, dois modelos inovadores de financiamento, o fundo de venture capitalVox Capital e o fundo de empréstimo social SITAWI, entraram no mercado brasileiro para solucionar esse desafio. Este estudo analisa ambos os fundos,associando o problema do financiamento de empresas e organizações sociais às teorias tradicionais de negócio. Mais especificamente, por meio de um estudo de caso,é avaliado se o risco de agência (agency risk) explica as práticas e o designcontratual utilizados pelos fundos. A pesquisa é baseada num estudo de Alemany e Scarlata (2010) sobre a estruturação dos negócios de fundos filantrópicos de capital empreendedor (PhVC, na sigla em inglês) na América do Norte e na Europa. Uma definição chave desse estudo é que organizações sem fins lucrativos, ao contrário daquelas com fins lucrativos, estão sujeitas a uma restrição de distribuição de lucros. Embora Alemany e Scarlata (2010) tivessem descobertoque parceria (stewardship), mais do que o problema de agência (agency problem), explica a estrutura dos negócios dos fundos PhVC, as implicações do presente estudo de caso para o Brasil são diferentes. Os resultados sugerem que o problema de agência,mais do que a parceria,descreve adequadamente os contratos analisados de financiamento. Detectou-seque cláusulas contratuais não foram apenas usadas para mitigar o risco de agênciaresultanteda ausência de uma restrição de distribuição de lucros, mas também para reger as estruturas cooperativas com organizações sem fins lucrativos. No caso de SITAWI, a restrição dos destinatários de fundos de distribuir lucros provou-se uma ferramenta efetiva para alinhar os interesses entre os financiadores e os destinatários dos fundos. Apesar daimplicação da presença de parceria, os contratos do fundo social contiveram cláusulas geralmente usadas para reduzir o risco de agência. No caso de Vox Capital, os destinatários dos fundos eram empresas com fins lucrativos, portanto não sujeitas à restrição de distribuição de lucros. O modelo de negócio de Vox Capital é organizado para impedir qualquer incidência potencial do problema de agência. Ambos os fundos, independentemente da estrutura jurídica dos beneficiários destes fundos, evidenciaram o intuito de garantir a aplicação de práticas de negócio utilizadas pelas empresas tradicionais do setor corporativo em vez daquelas utilizadas no setor social.