Cu0.5Zn0.5Fe2O4 ferrite for application as a soft magnetic material

This work involved the synthesis and characterization of Cu0.5Zn0.5Fe2O4 ferrite powders prepared by combustion reaction for use as soft magnetic materials. The powders were characterized by nitrogen adsorption (BET), XRD, Rietveld refinement, SEM, TEM and magnetic measures. The results indicate that the combustion reaction yielded crystalline powders containing spinel ferrite as the primary phase and traces of Fe2O3 as secondary phase. The crystallite size and lattice microdeformation calculated from Rietveld refinements were 36 and 0.24 nm, respectively. The micrographic analysis revealed particles smaller than 100 nm and fine particle agglomerates. The particles were approximately spherical and their size, calculated by TEM, was 29 nm. The magnetic parameters indicated that the Cu-Zn ferrite powders presented closed hysteresis loops and soft magnetic properties. © (2012) Trans Tech Publications, Switzerland.

Kinetic parameters for thermal decomposition of supramolecular polymers derived from diclofenac-meglumine supramolecular adducts

Meglumine is an aminocarbohydrate able to form supramolecular adducts with organic acids. The recognition is based on hydrogen bonds and the structures resulting from the complexation have high solubility in water. This property has been exploited by the pharmaceutical industry in the improvement of existing drugs, and the successful example of this approach involves the poorly soluble non-steroidal anti-inflammatory drugs (NSAIDs). Investigation of the thermal behavior of adduct obtained from meglumine and the NSAID diclofenac revealed that a polymer-like material is formed from the self-assembly of diclofenac-meglumine adducts in the melt. This polymer showed a high molecular weight around 2.0×105kDa. The kinetic parameters for the thermal decomposition step of the polymer were determined by the Capela-Ribeiro non-linear isoconversional method. From data for the TG curves in nitrogen atmosphere and heating rates of 5, 10, 15 and 20°Cmin-1, the Eα and Bα terms could be determined, and consequently the pre-exponential factor, Aα, as well as the kinetic model, g(α). © 2012 Elsevier B.V.

Effect of Storage Time and Temperature of Equine Epididymis on the Viability, Motion Parameters, and Freezability of Epididymal Sperm

The recovery of sperm from the epididymal cauda may be the last chance to obtain genetic material when sudden death or serious injuries occur in valuable stallions. However, the lack of technical knowledge regarding the storage and transportation of the epididymis often prevents the preservation of the sperm. Therefore, the aim of this study was to compare sperm parameters of sperm obtained immediately after orchiectomy with sperm recovered from epididymal cauda at different times after storage at 5°C and at room temperature (RT). For that, 48 stallions of different breeds were used. In group 1 (control group), eight stallions were used, and the harvest of the epididymal sperm was performed immediately after orchiectomy. In group 2, 40 stallions were used, which were divided into five groups according to the storage time of the epididymis after orchiectomy (6, 12, 18, 24, or 30 hours), making a total of eight stallions per group. One epididymis of each stallion was stored at 5°C, and the contralateral epididymis was stored at RT, both for the same period. The sperm parameters of total motility, progressive motility, progressive linear velocity, curvilinear velocity, percentage of rapid sperm, and plasma membrane integrity were evaluated in all the groups after sperm recovery, resuspension in a sperm freezing diluent, and thawing. In conclusion, the storage of the testis-epididymis complex at 5°C provided better preservation of epididymal sperm than the storage at RT, and regardless of the temperature, the progressive motility is the sperm parameter that is most sensitive to storage time. © 2013 Elsevier Inc.

Systematic review of the effects of fatigue on spatiotemporal gait parameters

PURPOSE: This systematic review aimed to assess changes on spatiotemporal gait parameters due to fatigue. MATERIAL AND METHOD: A search was carried out in literature published from 1950 to December 2010 and retrieved 771 articles using terms referring to walking and fatigue in the title, abstract or keywords. Two researchers assessed the selection and quality of each article independently. RESULTS: Seven studies were selected for this systematic review, two of which reported on the same data set. Several spatiotemporal parameters were reported to change with fatigue, but the few variables studied in multiple studies, gait speed and stride or step length and stride time, were affected only in single studies. Fatigue appears to modulate spatiotemporal gait parameters, but the effects of fatigue appear to be dependent on the muscles that were fatigued, and age that appears to be a moderator of the effects of fatigue on gait. © 2013 - IOS Press and the authors. All rights reserved.

Low tungsten content of nanostructured material supported on carbon for the degradation of phenol

A comparative study using different mass proportions of WO3/C (1%, 5%, 10% and 15%) for H2O2 electrogeneration and subsequent phenol degradation was performed. To include the influence of the carbon substrate and the preparation methods, all synthesis parameters were evaluated. The WO3/C materials were prepared by a modified polymeric precursor method (PPM) and the sol-gel method (SGM) on Vulcan XC 72R and Printex L6 carbon supports, verifying the most efficient metal/carbon proportion. The materials were physically characterized by X-ray diffraction (XRD) and by X-ray photoelectron spectroscopy (XPS) techniques. The XRD and the XPS techniques identified just one phase containing WO3 and elevated oxygen concentration on carbon with the presence of WO3. The oxygen reduction reaction (ORR), studied by the rotating ring-disk electrode technique, showed that WO3/C material with the lowest tungsten content (1% WO3/C), supported on Vulcan XC 72R and prepared by SGM, was the most promising electrocatalyst for H2O2 electrogeneration. This material was then analyzed using a gas diffusion electrode (GDE) and 585mgL-1 of H2O2 was produced in acid media. This GDE was employed as a working electrode in an electrochemical cell to promote phenol degradation by an advanced oxidative process. The most efficient method applied was the photo-electro-Fenton; this method allowed for 65% degradation and 11% mineralization of phenol during a 2-h period. Following 12h of exhaustive electrolysis using the photo-electro-Fenton method, the total degradation of phenol was observed after 4h and the mineralization of phenol approached 75% after 12h. © 2013 Elsevier B.V.

Desempenho do stellite como material de ferramenta no serramento da madeira

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção de material didático para o ensino de solos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aporte hídrico e de material particulado em suspensão para a Baía do Marajó: contribuições dos rios Jacaré Grande, Pará e Tocantins

O sistema estuarino Amazônico é influenciado pelo regime de maré e pelas variações da descarga fluvial que modificam o regime das correntes e contribuem com aportes de material particulado em suspensão (MPS) acarretando diversas modificações morfológicas ao longo do rio. A quantificação desses parâmetros fornece um entendimento sobre as taxas de exportação e importação de materiais ou volume e suas implicações na geomorfologia estuarina. O objetivo desse estudo é avaliar a hidrodinâmica, o transporte de volume e de MPS em diferentes períodos nos rios Jacaré Grande, Pará e foz do Tocantins. Coletaram-se dados de velocidade e direção da corrente, maré, turbidez, transporte de volume e MPS, ao longo de um ciclo de maré no período seco (2012) e chuvoso (2013). O rio Pará exportou volume, nos dois períodos. O rio Tocantins importou no período seco e exportou no período chuvoso. O rio Jacaré Grande influenciado pelo rio Amazonas, importou no período chuvoso e exportou no período seco. A análise dos métodos de transporte de volume mostrou uma tendência de exportação em direção ao rio Amazonas e a baía do Marajó no período seco e para baía do Marajó no período chuvoso. Os valores de MPS no período chuvoso foram maiores, sendo decrescente do rio Jacaré Grande até o rio Tocantins, respectivamente período seco e chuvoso. A turbidez seguiu a mesma tendência de MPS com a maré, tendo os valores máximos durante a enchente. Os métodos de transporte de MPS, mostrou valores similares e que obedecia a mesma direção. O rio Jacaré Grande atuou como exportador no período seco e importador no período chuvoso, o rio Pará como exportador nos dois períodos e o rio Tocantins como importador no período seco e exportador no período chuvoso. O sistema formado pelos três rios mostrou a mesma tendência de exportação nos dois períodos, tendo no período seco duas rotas de exportação, o rio Amazonas e a baía do Marajó, e no período chuvoso uma rota de exportação, a baía do Marajó. Anualmente o sistema exporta entre 5 a 7,2 milhões de toneladas, sendo que possivelmente a baía do Marajó recebe entre 3,7 a 5,8 milhões de toneladas, podendo o volume transportado para a região oceânica ser bem maior.Os fluxos de MPS associado à variabilidade das condicionantes ambientais modelam a região estuarina, como na foz do rio Tocantins e na Baía do Guajará, sendo preciso um monitoramento continuo devido a possíveis acidentes náuticos ou a derramamentos de óleo ou qualquer contaminante na região que acarrete danos ao meio.

Effect of the interfacial area measurement parameters on the push-out strength between fiber post and dentin

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Internal standard for amorphous pharmaceuticals products quantification and an application of Parametric Rietveld refinement using time, temperature and relative humidity as 'non-crystallographic' parameters

Pós-graduação em Química - IQ

Evaluation of the Parameters Affecting the Photoelectrocatalytic Reduction of CO2 to CH3OH at Cu/Cu2O Electrode

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Pluralidade cultural e educação física: elaboração de material didático

In 1997, the National Curriculum Parameters (BRASIL, 1997a) proposed the incorporation of the Transversal Themes in all of the knowledge areas. Specifically in the School Physical Education, the teacher working with transversality must stabilish bridges between the body culture practice with these themes. Promote this relationship is not a simple task and there are many problems that stuck the advance of this propose. So, thinking about making didactical formulat teaching stragies and think about the development of their practice. Another challenge is considerate as a beginning in the pedagogic activity the student’s knowledge and experience, as listening during the process of knowledge construction. In this way, the aim of this research is investigate the 8th and 9th grade of the primary school students conception about Cultural Plurality. After this, using the information taken gron the students, we are going to present subisidies to make a textbook, for the teachers and for students, with Physical Education activities possibilies with this Transversal Theme. Keeping in mind the aim of this research, we used the semi-structed interview as a instrument of data collection. The interview was made with 30 students of the 8th and 9th grade the primary school from two statual schools of Rio Claro city. The procediments were executed following the ethics comite requirements. In other to associate the Cultural Plurality with Physical Education, dance and physical adventure activities contents were selected. The results showed that the students know few thinks about this Transversal Themes, because they had apoor knowledge, according to National Curriculum Parameters. In scholar environment and Physical Education classes, there are many cases of prejudice and discrimination, mostly by the leack of ability. Nonetheless, most of the students are able to...(Complete abstract click electronic access below)

Natural rubber/leather waste composite foam: A new eco-friendly material and recycling approach

This article describes a new approach of recycling the leather waste (shavings) using it as filler in natural rubber foams composites. The foams were prepared using different amounts of leather waste (0-60 parts per hundred of rubber) and submitted to morphological (SEM microscopy) and mechanical analyses (cyclic stress-strain compression). The increase of leather shavings on the composite causes an increase of viscosity in the mixture, which reflects in the foaming process. This results in smaller and fairly uniform cells. Furthermore, expanded rubber has the biggest cell size, with more than 70% of cell with 1000 mu m, while the composite with the higher concentration of leather has around 80% of total number of cells with 100-400 mu m. The mechanical parameters were found to depend on the leather dust concentration. Moreover, the stiffness rises with the increase of leather shavings; consequently, the compression force for expanded rubber was 0.126 MPa as well as the composite with higher concentration of leather was 7.55 MPa. (c) 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41636.

Influence of crown-to-implant ratio, retention system, restorative material, and occlusal loading on stress concentrations in single short implants

Purpose: The aim of this study was to assess the contributions of some prosthetic parameters such as crown-to-implant (C/I) ratio, retention system, restorative material, and occlusal loading on stress concentrations within a single posterior crown supported by a short implant. Materials and Methods: Computer-aided design software was used to create 32 finite element models of an atrophic posterior partially edentulous mandible with a single external-hexagon implant (5 mm wide × 7 mm long) in the first molar region. Finite element analysis software with a convergence analysis of 5% to mesh refinement was used to evaluate the effects of C/I ratio (1:1; 1.5:1; 2:1, or 2.5:1), prosthetic retention system (cemented or screwed), and restorative material (metal-ceramic or all ceramic). The crowns were loaded with simulated normal or traumatic occlusal forces. The maximum principal stress (σmax) for cortical and cancellous bone and von Mises stress (σvM) for the implant and abutment screw were computed and analyzed. The percent contribution of each variable to the stress concentration was calculated from the sum of squares analysis. Results: Traumatic occlusion and a high C/I ratio increased stress concentrations. The C/I ratio was responsible for 11.45% of the total stress in the cortical bone, whereas occlusal loading contributed 70.92% to the total stress in the implant. The retention system contributed 0.91% of the total stress in the cortical bone. The restorative material was responsible for only 0.09% of the total stress in the cancellous bone. Conclusion: Occlusal loading was the most important stress concentration factor in the finite element model of a single posterior crown supported by a short implant.

Chemico-technological parameters and maturation curves of sweet sorghum genotypes for bioethanol production

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)