Total and harvest-date yield of processing tomato cultivars

The productivity of 28 tomato cultivars was evaluated over three stages of harvest. The study was carried out during from June to December of 1999 in an open field at the experimental area of the Section of Olericulture and Aromatic Medicinal Plants, Department of Crop Production at FCAV-UNESP, Jaboticabal, SP, Brazil. The cultivars studied were H 7155, Hypeel, Andino, U 573, H 9036, IPA 6, H 9494, AG 33, Yuba, RPT 1294, AG 72, Pelmeech, Curico, Hypeel 45, RPT 1478, H 9492, H 9498, H 2710, Hitech 45, Halley, Botu 13, H 9553, U 646, NK 1570, AG 45, RPT 1095, RPT 1570, and PSX 37511. The experimental design was a randomized block design with four repetitions, with five plants per plot. Productivity was evaluated at three stages of harvest at 119, 149 and 179 days after seeding. There were no significant differences among the cultivars at the first harvest (119 days). The majority of the cultivars produced their highest yield at the second harvest; the most productive cultivars were Curicó and AG 72, which yielded 4.69 and 4.67 kg/plant, respectively, although they did not differ statistically from the cultivars Hypeel 45 (4.35 kg/plant) and H 9498 (4.16 kg/plant). Yields of the cultivars Andino and H 9494 were evenly distributed between the second and third harvests. At the third harvest, cultivar IPA 6 had the highest yield (2.9 kg/plant) and was statistically different from all other cultivars except H 9036 (2.34 kg). These two cultivars had the most delayed and concentrated maturity, making them suitable for mechanical harvesting, although at a later time. Cultivar AG 72 had the greatest total yield (5.76 kg/plant), but it was not statistically different from cultivars Hypeel 45 (5.43 kg), Curico (4.17 kg), H 9498 (4.83 kg), H 7155 (4.58 kg) and Halley (4.55 kg). All of the cultivars, with the exception of cultivars H 9036, IPA 6, Andino and H 9494 showed in the second harvest concentrated maturity, making it suitable for mechanical harvesting.

Physical-chemical characterization of processing tomato fruit

Fruit of 28 tomato cultivars for industrial processing were characterized to identify cultivars with potential for in natura consumption. The experiment was carried out in Jaboticabal-SP, Brazil (21o15'22'' South, 48o18'58'' West, altitude 595 m), on a Haplorthox soil during June-December. The cultivars used in this study were: H 7155, Hypeel 108, Andino, U 573, H 9036, Ipa 6, H 9494, AG 33, Yuba, RPT 1294, AG 72, Peelmech, Curicó, Hypeel 45, RPT 1478, H 9492, H 9498, H 2710, Hitech 45, Halley, Botu 13, H 9553, U 646, NK 1570, AG 45, RPT 1095, RPT 1570 and PSX 37511. The experimental design was randomized blocks, replicated four times. Ten fruits per plot were analyzed, evaluating the following characteristics: shape (oblong or round); length and diameter (mm); external and internal coloration; presence of fissures; number of loci; pulp thickness (mm); soluble solids content (Brix) and total acidity. Only cultivars Hypeel 108, AG 72, NK 1570, RPT 1570 had oblong fruit. Cultivars which had pulp thicker than 5.5 mm, a characteristic which is directly related to fruit yield for industrial purposes were: Ipa 6, Andino, U 646, H 9553, RPT 1294 and Hypeel 108. Cultivars Ipa 6 and Andino also presented elevated values for length, diameter and pulp thickness, indicating them as quality material for industry or, alternatively, for in natura market. Among the cultivars which presented better values for acidity (higher or equal to 0.3 g citric acid 100 g-1) were RPT 1095, AG 45, H 9553 and Hypeel 45.

Non-nutrient heavy metals in tomato plants cultivated in soil amended with biosolid and sugar-cane bagasse compost

In this study, non-nutrient heavy metal concentrations (Cd, Cr, Ni and Pb) were measured in composts during the composting process, in compost/Red-yellow Latosol mixtures, and in tomato plants. Composts were produced using sugar-cane bagasse, biosolids and cattle manure in the proportions 75-0-25, 75-12.5-12.5, 75-25-0, 50-50-0 or 0-100-0 (composts with 0, 12.5, 25, 50 and 100% biosolids). The composts were applied to the soil, in 6 treatments and a control (mineral fertilization). Control and the 0% biosolids treatments received inorganic nitrogen and all the treatments received the same amount of N, P and K. Tomato plants were cultivated in 24-L pots, in a green house in Jaboticabal, SP, Brazil. The experiment had a split plot design, in randomized blocks. Cadmium, Cr, Ni and Pb concentrations were determined during the composting process (7, 27, 57, 97 and 127 days after compost mounting), in soil (0 and 164 days after mixing) and plants. The samples were subjected to digestion with HNO 3, H2O2 and HCl and the metals were determined by AAS. Negative correlations were observed between Cd, Cr and Pb in the compost and Cd, Cr and Pb plant uptake, as well as Ni in the compost and Ni concentration in the plants. The concentrations of Cd, Cr, Ni and Pb increased during composting. Only Cd levels increased when compost was applied to the soil. The roots accumulated Cr, Ni and Pb, the stems and leaves, Cd and Ni and the fruits did not accumulate any of the metals studied. The composts with biosolids did not increase Cd, Cr, Ni and Pb uptake by plants.

Productivity of cherry tomatoes under protected cultivation carried out with different types of pruning and spacing

The aim of the study was to evaluate production and determine the level of total soluble solids for cherry tomatoes, under protected cultivation carried out with different types of spacing and pruning. The experiment was performed according to a randomized block design in a 2×2 factorial scheme, with two types of spacing between plants and two types of pruning, and with five repetitions. The cultivar 'Sindy' (De Ruiter) was utilized. Each experimental parcel contained seven plants, and fruits were collected from the five central plants. The seedlings were produced in Styrofoam trays of 128 cells and transplanted at 33 days after planting using two types of spacing between plants (0.3 and 0.5 m) and 1 m spacing between rows. The plants were grown as single-or double-stem form and staked individually. The parameters evaluated were the number of fruit per plant, fresh weight of fruit and the level of total soluble solids expressed in °Brix. There was no evidence of significant interaction between the treatments. For fresh weight of fruit per plant, there was a significant effect when the plants were grown with a spacing of 1 × 0.5 m, with 4.12 kg per plant, compared to a production of 3.00 kg per plant with a spacing of 1 × 0.3 m. With regard to the number of fruit per plant, a significant difference was seen between the two types of spacing, where a spacing of 1 × 0.3 m yielded a lower number of fruit per plant (188.8), compared to that observed with a spacing of 1 × 0.5 m (238.1). With regard to the two types of pruning, there was a significant effect for only the number of fruit per plant, where the mean number of fruit was 188.4 with one stem and 238.4 with two stems. No significant difference was observed between the treatments for the level of total soluble solids. It is concluded that for the cultivar 'Sindy', under protected cultivation, production is better with a spacing of 0.5 m between plants and the use of two stems per plant.

High temperature tolerance of indeterminate tomatoes in Brazil

The study was conducted at the Section of Crop Production and Aromatic Medicinal Plants of FCAV-UNESP, Jaboticabal Campus - Sao Paulo, Brazil. Nine indeterminate tomato (Lycopersicon esculentum Mill.) genotypes, Jumbo, Santa Clara, Cláudia VF, Concorde, Débora Plus, FM-9, Carmen, Príncipe Gigante, and CL 5915, were evaluated for high temperature tolerance. Three determinate tomato genotypes, FM-9, Suncoast and TSW-10, were cultivated in a greenhouse at more than 33°C air temperature for at least 2 h/day during bloom. The objective was to identify variable genotypes to determine their tolerance of high temperature. Four replications of fifteen treatments were planted in a randomized block design. Dissimilarity was determined by the generalized Mahalanobis distance. Delineation groups were optimized with the Tocher technique. The tomatoes were classified into six groups of similar temperature responses. CL 5915 was the most tolerant of high temperatures. Crossing of genotypes within one group has no advantage because little genetic divergence and no heterotic response would be expected. However, the crossing of genotypes between groups is suggested. Knowledge of these groups will be important for efficient future breeding efforts.

Heavy metals availability and fractions in soil amended with biosolid composts

The heavy metals when linked to organic matter have a behavior in the soil that is still little known. This study aimed to evaluate the effect of sewage-sludge-based composts when incorporated in the soil, in relation to heavy metals availability. Five composts were incorporated using sugar-cane bagasse, sewage sludge and cattle manure in the respective proportions: 75-0-25, 75-12.5-12.5, 75-25-0, 50-50-0 and 0-100-0 (composts with 0, 12.5, 25, 50 and 100% sewage sludge). The experiment consisted of 6 treatments (5 composts and a control with mineral fertilization) in randomized blocks with a split-plot design. The control and the treatment of 0% sewage sludge received inorganic nitrogen (N). All the treatments received the same amount of N (8.33 g) K (5.80 g) and K (8.11 g) per pot. Tomato plants were cultivated in 24.0 L pots in a greenhouse in Jaboticabal, SP, Brazil. The concentrations of heavy metals were determined in the soil samples at day 0 after compost incorporation. The higher the sewage sludge doses, the higher heavy metal contents in the soil. Among extractants, Melhlich-1 extracted the highest amount of heavy metals, while DTPA extracted the lowest one. The residual fraction presented the highest heavy metal content, followed by Fe oxides crystalline and amorphous to Cu, Cr and Mn, and Mn oxides, and Fe amorphous to Zn, indicating strong associations to oxides and clays. There were significant positive correlations between Mn contents in the plant and Mn linked to Fe oxide amorphous and crystalline.

Resistance of rose rootstocks to Meloidogyne hapla nematode

Roses are widely used in landscaping. One of the most important fitossanitary problems of this ornamental plant in gardens is the fitonematodes, especially Meloidogyne hapla, which is the most important one in colder climate regions. This work had the objective of study the resistance of nine rose rootstocks (Rosa multiflora 'Paulista', R. multiflora 'Japanese', R. multiflora 'Iowa', R. multiflora 'Kopman's', R. indica × multiflora, R. indica 'Mayor', R. sp. 'Natual Brier', R. manetti and R. canina 'Inermis') to Meloidogyne hapla nematode. Ten replications of each rootstock were used. The roots, collected in a commercial area of cut roses, visually had galls there were isolated and identified. The inoculum of M. hapla was previously produced in rose and tomatoes seedlings under greenhouse conditions. The plants were harvested ninety days after inoculation. The roots were washed and the number of eggs and juveniles recuperated in the root system of each plant was estimated by the Final Population (FP), and the Reproductive Factor (RF) was calculated. The rootstocks with RF<1 values were considered resistant, and the ones with RF>1, susceptible. Rosa manetti and Rosa sp. 'Natual Brier' rootstocks showed the lowest values for RF, indicating that, although they are susceptible, they provide the lowest nematode reproduction. Based on the RF values, it was concluded that all the rose rootstocks evaluated were susceptible to M. hapla nematode.

Improving the affinity of tomato grafted on Solanum torvum using an intermediate rootstock

Most of the interspecific rootstocks (Lycopersicum esculentum × L. hirsutum) used in grafted Spanish tomato crops are resistant to Meloidogyne nematodes, but the 'Mi' resistance gene does not work well at high soil temperatures. Ralstonia solanacearum is a bacterial disease usual in tropical areas, but recently identified with low incidence in several European countries. This disease could be controlled by grafting tomato on Solanum torvum, which is also resistant to Meloidogyne. However, S. torvum and tomato have low grafting affinity, which could be improved using an intermediate rootstock. Some cultivars of eggplant have a relatively good affinity with tomato and complete affinity with S. torvum. In this study we compared two tomato cultivars (one resistant to Verticillium dalihae, Fusarium oxysporum v. lycopersici race 2 and Meloidogyne spp., and one non-resistant) grafted onto 'Beaufort' (Lycopersicum esculentum × L. hirsutum), 'Torvum Vigor' (Solanum torvum) and also with an intermediate grafting of eggplant ('Cristal') between tomato and S. torvum, with nongrafted plants as controls. This arrangement was carried out in two cropping cycles (winter-spring and summer-autumn). In both cycles, plants grafted onto S. torvum, both single or double grafted, yielded less than those grafted onto 'Beaufort' or nongrafted plants. In the spring cycle, no differences were found between single and double-grafted plants using S. torvum rootstocks, but in the autumn cycle double grafted plants had higher yields than the single grafted plants. The severity of nematode infections, in terms of reducing yields, and/or hypothetical infections of Ralstonia, will determine the utility of this technique in tomato production.

Manejo da Irrigação Para Otimização da Produtividade E Qualidade de Frutos de Tomateiro em Sistema de Plantio Direto

There is much information on the adequate soil water matrix potential for returning irrigation in conventional soil tillage systems; however there is not enough information on the best soil water matrix potential for no-tillage production systems. This work aimed to study the effect of five irrigation levels on yield, soluble solids, and fruit acidity of the Hypeel tomato, cultivated for industrial processing and cropped on no-tillage system in Yellow Latosol. The experiment was carried out on a randomized block design with five treatments and four replications. The treatments consisted in different soil water matrix potentials for returning irrigation (m at 13cm of soil depth): -15, -30, -45, -60 and -75 kPa. The results obtained showed that the soil water matrix potential of -28.5 kPa resulted in maximum yields for tomato crop; whereas the value of -50.8 kPa resulted in the maximum fruit soluble solids concentration.

Foliar and Radicular Absorption of Boron by Beetroot and Tomato Plants

The isotopic technique was employed to study boron (B) mobility in tomato and beetroot plants under protected cultivation conditions. An experiment was conducted in which both species grew in 10-dm3 vases filled with coconut fiber, under hydroponic conditions. The plants were subjected to four different treatments: (1) no B in the substratum and no foliar fertilization; (2) no B in the substratum, with foliar 10B fertilization; (3) B in the substratum, with foliar 10B fertilization; and (4) 10B in the substratum and no foliar fertilization. The biological growth variables and total B and 10B contents in the plant parts grown after the application of the nutrient were evaluated. For increasing B content in young tissues, the foliar application of this element was not as efficient as application via root system, indicating low mobility of B in the tissues of both beetroot and tomato plants. © 2013 Copyright Taylor & Francis Group, LLC.

Plant-derived essential oils affecting settlement and oviposition of Bemisia tabaci (Genn.) biotype B on tomato

The silverleaf whitefly Bemisia tabaci (Genn.) biotype B (Hemiptera: Aleyrodidae) is an economically important pest of tomatoes Solanum lycopersicum (L.), causing irregular ripening on fruits and transmitting several plant pathogenic geminiviruses. The management of this pest is commonly based on repetitive spraying with synthetic pesticides, causing serious environmental damages and increase of resistance by insect population. In the present study, essential oils from the leaves of Artemisia camphorata Vill., Ageratum conyzoides L., Foeniculum vulgare Mill., Lippia alba (Mill.) N. E. Br., Plectranthus neochilus Schltr., and Tagetes erecta L. were investigated for their possible repellent and oviposition-deterrent effects against B. tabaci biotype B on tomato. In a multi-choice assay, P. neochilus essential oil was the most active repellent and oviposition deterrent. Essential oils of A. conyzoides and T. erecta significantly deterred the female B. tabaci biotype B from laying eggs on treated tomato leaflets compared with the control. (E)-Caryophyllene (30.67 %) and the monoterpenes α-pinene (15.02 %) and α-thujene (11.70 %) were identified as the major constituents of the essential oil of P. neochilus. Our findings demonstrated the potential of essential oil of P. neochilus and other oils in the reduction of settlement and oviposition of B. tabaci biotype B on tomato. © 2012 Springer-Verlag Berlin Heidelberg.

Neoleucinodes elegantalis (Guenée) (Lep.: Crambidae) em tomateiro estaqueado: dinâmica populacional, nível de controle com feromônio sexual e eficiência de agrotóxicos

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Teor de nutrientes e produtividade em híbridos de tomateiro em função de doses de COø aplicadas via água de irrigação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Absorção e mobilidade do boro em plantas de tomate e de beterraba

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito do processo de obtenção do catchup sobre seus compostos antioxidantes, capacidade seqüestrante do radical DPPH e cor

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)