Study of band offsets at the Cu2SnS3/In2O3: Sn interface using x-ray photoelectron spectroscopy

Cu2SnS3 thins films were deposited onto In2O3: Sn coated soda lime glass substrates by spin coating technique. The films have been structurally characterized using x-ray Diffraction (XRD) and Atomic Force Microscopy (AFM). The morphology of the films was studied using Field Emission Scanning Electron Microscopy (FESEM). The optical properties of the films were determined using UV-vis-NIR spectrophotometer. The electrical properties were measured using Hall effect measurements. The energy band offsets at the Cu2SnS3/In2O3: Sn interface were calculated using x-ray photoelectron spectroscopy (XPS). The valence band offset was found to be -3.4 +/- 0.24 eV. From the valence band offset value, the conduction band offset is calculated to be -1.95 +/- 0.34 eV. The energy band alignment indicates a type-II misaligned heterostructure formation.

Ballistic impact of ceramics

The impact behaviour of a range of glass and ceramic materials has been studied using high-speed photography. A gas gun was used to project hardened spheres at plate specimens in the velocity range 30 to 1000m s-1. The target materials included soda-lime glass, boron carbide and various glass ceramics and aluminas. The performance of a particular ceramic was found to depend on a combination of parameters but of key importance was the relative hardness of the projectile and target materials. The fracture toughness, K(IC), had only a secondary effect.

Environmental impact assessment of agrochemicals for fish production - a review paper

The environmental impact of agro-chemicals for fish production was extensively reviewed. The positive contribution of agro- chemicals and the devastating effect on aquaculture was x-rayed to alert users to this obvious environmental problem. Lime and fertilizers are commonly used in fish farming to increase pH of pond soil and water and to increase alkalinity and hardness, reduce humic acid content and to initiate primary and secondary productivity. Devastating effect of lime on environment is likely to be minimal. In the case of fertilizers, over utilization of this agro-chemical could impair water quality as phytoplankton bloom become excessive which consequently raises BOD. The use of Therapeutants in aquaculture was discovered to be more popular in Europe and North America than in the tropics (Africa). Commonly used therapeutants include antibiotics and antimicrobials. For fish pathology chemicals like formalin, potassium permanganate, Dipterex and malachite green are widely in use. Effluent from farms where these chemicals are commonly in use can distort the aquatic ecosystem. The changes in water quality, aquatic community structure and productivity caused by intensive aquaculture are typical of the impacts of pollution from a wide variety of sources like sewage, agricultural run-off and effluent discharges from industry

Economic analysis of fish farming in Ogun State

This study examined the economic potential of fish farming in Abeokuta zone of Ogun State in the 2003 production season. Descriptive statistics cost returns and multiple regression analysis were used in analyzing the data. The farmers predominantly practiced monoculture. Inefficiency in the use of pond size, lime and labour with over-utilization of fingerlings stocked was revealed by the study. The average variable cost of N124.67 constituted 45% of the total while average fixed cost was N149.802.67 per average farm size. Fish farming was found to be a profitable venture in the study area with a net income of N761, 400.58 for an average pond size of 301.47sq.m. Based on these findings, it is suggested that for profit maximization, the fish farm will have to increase the level of their use of fingerlings and fertilizers and decrease the use of lime labour and pond size

Fluorescent Ag nanoclusters in glass induced by an infrared femtosecond laser

We report a method for the selective introduction of fluorescent Ag nanoclusters in glass. Extinction and photoluminescence spectra show that a fraction of the Ag atoms are generated through femtosecond laser induced multiphoton reduction and then aggregate to form Ag nanoclusters after heat treatment. Red luminescence from the irradiated region is observed under blue or green laser excitation. The fluorescence can be attributed to interband transitions within Ag nanoclusters. This method provides a novel route to fabricate fluorescent nanomaterials in 3D transparent materials. (c) 2007 Elsevier B.V. All rights reserved.

Origin of Chinese ancient glasses;study on the earliest Chinese ancient glasses

The earliest Chinese ancient glasses before the West Han Dynasty (200 BC) from different regions are studied. The glass samples were unearthed from Hunan, Hubei, Yunnan, Sichuan, Guizhou, Guangdong and Xinjiang of China. The chemical composition of these glasses samples is analyzed by proton induced X-ray emission (PIXE) technique, energy dispersive X-ray fluorescence (EDXRF) method and inductively coupled plasma atomic emission spectrometry (ICP-AES). It is shown that the glass chemical compositions belong to barium-lead silicate BaO-PbO-SiO2, potash soda lime silicate K2O (Na2O)-CaO-SiO2 (K2O/Na2O > 1), soda potash lime silicate Na2O (K2O)-CaO-SiO2 (K2O/Na2O < 1) and potash silicate K2O-SiO2 glass systems, respectively. The origins of the earliest Chinese ancient glasses are discussed from the archaeological and historical points of view. These four types of Chinese ancient glasses were all made in Chinese territory using local raw materials. The glass preparation technology was related to the Chinese ancient bronze metallurgy and proto-porcelain glaze technology. The glass technology relationship between the East and the West is analyzed at the same time.

Effect of water content in sol on optical properties of hybrid sol-gel derived TiO2/SiO2/ormosil film

Sol-gel derived TiO2/SiO2/ormosil hybrid planar waveguides have been deposited on soda-lime glass slides and silicon substrates, films were heat treated at 150 degreesC for 2 h or dried at room temperature. Different amounts of water were added to sols to study their impacts on microstructures and optical properties of films. The samples were characterized by m-line spectroscopy, Fourier transform infrared spectroscopy (FT-IR), UV/VIS/NIR spectrophotometer (UV-vis), atomic force microscopy (AFM), thermal analysis instrument and scattering-detection method. The refractive index was found to have the largest value at the molar ratio H2O/OR = 1 in sol (OR means -OCH3, -OC2H5 and -OC4H9 in the sol), whereas the thickest film appears at H2O/OR = 1/2. The rms surface roughness of all the films is lower than 1.1 nm, and increases with the increase of water content in sol. Higher water content leads to higher attenuation of film. (C) 2004 Elsevier B.V. All rights reserved.

Biossorção de cobre (II) e cálcio (II) pela biomassa da macroalga marrom Sargassum filipendula

No presente trabalho, pretendeu-se avaliar a alga marinha Sargassum filipendula na sua capacidade de remoção do metal cobre na presença do metal cálcio, de modo a verificar o efeito da presença do cálcio, proveniente do hidróxido de cálcio (cal hidratada), utilizado no tratamento primário de efluentes por precipitação química. Para tanto, foi realizado primeiramente o estudo da cinética de biossorção de cobre e cálcio em regime de batelada, nas concentrações de 50 e 200 g/mL, e em seguida foi estudado o equilíbrio da biossorção de cobre e cálcio, também em regime de batelada, utilizando soluções isoladas e combinadas de cobre e cálcio, em concentrações variadas, com biomassa lavada com água corrente e com HCl 0,1 mol/L, de modo a verificar se houve melhora na biossorção com a protonação da biomassa. Os resultados do estudo cinético da biossorção do cobre e do cálcio mostraram, em todos os casos, que o equilíbrio ocorreu até os 30 minutos iniciais e que os resultados do cobre se ajustaram melhor a um modelo cinético de segunda ordem, enquanto que os resultados do cálcio não se ajustaram a nenhum dos dois modelos propostos. Foi possível verificar ainda uma relação direta entre biossorção de cobre e liberação de elementos alcalinos e alcalino-terrosos, sugerindo o envolvimento de troca-iônica durante o processo. Já com os resultados de estudo do equilíbrio da biossorção dos metais cobre e cálcio, foi possível obter algumas conclusões, dentre as quais podemos destacar a predileção pelo modelo de isotermas de Langmuir e a interferência na biosorção do cobre causada pela presença do cálcio na solução. Nesta etapa, foi possível ainda estabelecer novamente a correlação de permuta entre os metais cobre e alcalinos/alcalino terrosos. Os modelos de pseudo-primeira ordem e segunda ordem foram utilizados para avaliar a cinética de adsorção dos íons metálicos pela biomassa, enquanto que os modelos das isotermas de Langmuir e de Freundlich, foram utilizados para a representação do equilíbrio da biossorção

The History of Oyster Farming in Australia

Aboriginal Australians consumed oysters before settlement by Europeans as shown by the large number of kitchen middens along Australia's coast. Flat oysters, Ostrea angasi, were consumed in southeastern Australia, whereas both flat and Sydney rock oysters, Saccostrea glomerata, are found in kitchen middens in southern New South Wales (NSW), but only Sydney rock oysters are found in northern NSW and southern Queensland. Oyster fisheries began with the exploitation of dredge beds, for the use of oyster shell for lime production and oyster meat for consumption. These natural oyster beds were nealy all exhausted by the late 1800's, and they have not recovered. Oyster farming, one of the oldest aquaculture industries in Australia, began as the oyster fisheries declined in the late 1800's. Early attempts at farming flat oysters in Tasmania, Victoria, and South Australia, which started in the 1880's, were abandoned in the 1890's. However, a thriving Sydney rock oyster industry developed from primitive beginnings in NSW in the 1870's. Sydney rock oysters are farmed in NSW, southern Queensland, and at Albany, Western Australia (WA). Pacific oysters, Crassostrea gigas, are produced in Tasmania, South Australia, and Port Stephens, NSW. FLant oysters currently are farmed only in NSW, and there is also some small-scale harvesting of tropical species, the coarl rock or milky oyster, S. cucullata, and th black-lip oyster, Striostrea mytiloides, in northern Queensland. Despite intra- and interstate rivalries, oyster farmers are gradually realizing that they are all part of one industry, and this is reflected by the establishment of the national Australian Shellfish Quality Assuarance Program and the transfer of farming technology between states. Australia's oyster harvests have remained relatively stable since Sydney rock oyster production peaked in the mid 1970's at 13 million dozen. By the end of the 1990's this had stabilized at around 8 million dozen, and Pacific oyster production reached a total of 6.5 million dozen from Tasmania, South Australia, and Port Stephens, a total of 14.5 million dozen oysters for the whole country. This small increase in production during a time of substantial human population growth shows a smaller per capita consumption and a declining use of oysters as a "side-dish."

Biofiltração de compostos orgânicos voláteis e gás sulfídrico em estações de despejos industriais de processamento de hidrocarbonetos.

Neste trabalho foi estudado o tratamento simultâneo por biofiltração de emissões de compostos orgânicos voláteis, COV e gás sulfídrico, H2S, em estações de tratamento de despejos industriais, de refinaria de petróleo, ETDI. A biofiltração dos gases emanados da EDTI mostrou ser uma técnica de alta eficiência, atingindo valores de 95 a 99 % para tratamento simultâneo de COV e H2S em concentrações de 1000 e 100 ppmv, respectivamente. Foram realizados testes em 95 dias consecutivos de operação, em uma planta piloto instalada na Superintendência da Industrialização do Xisto, SIX, em São Mateus do Sul, Paraná, de março a agosto de 2006. O biofiltro foi do tipo fluxo ascendente, com 3,77 m3 de leito orgânico, composto de turfa, carvão ativado, lascas de madeira, serragem brita fina além de outros componentes menores. Foi realizada inoculação biológica com lodo filtrado de estação de tratamento de esgoto sanitário. As vazões de gás aplicadas variaram de 85 a 407 m3/h, resultando em taxas de carga de massa de 11,86 a 193,03 g de COV/h.m3 de leito e tempos de residência de 24 segundos a 6,5 minutos, com tempo ótimo de 1,6 minutos. A capacidade máxima de remoção do sistema encontrada, nas condições testadas, foi de 15 g de COV/h. m3, compatível com os valores encontrados na literatura para depuração biológica de COV na escala praticada. Também foi verificada a redução de componentes específicos de BTX, demonstrando boa degradabilidade dos compostos orgânicos. Finalmente o biofiltro demonstrou boa robustez biológica diante dos desvios operacionais intencionalmente provocados, tais como falta de umidade do leito, baixa temperatura, alta vazão, falta de carga de COV e baixo pH do leito. Depois de retomada a condição de operação estável, a biofiltração rapidamente atingiu o estado de equilíbrio, assegurando o uso eficiente e confiável da técnica no tratamento de gases de EDTI na indústria do hidrocarbonetos ou em refinarias de petróleo.

Carbon dioxide from earthworks: A bottom-up approach

Concerns over climate change mean engineers need to understand the greenhouse gas emissions associated with infrastructure projects. Standard coefficients are increasingly used to calculate the embodied emissions of construction materials, but these are not generally appropriate to inherently variable earthworks. This paper describes a new tool that takes a bottom-up approach to calculating carbon dioxide emissions from earthworks operations. In the case of bulk earthworks this is predominantly from the fuel used by machinery moving materials already on site. Typical earthworks solutions are explored along with the impact of using manufactured materials such as lime.

Water quality management on the enhancement of shrimp (Penaeus monodon Fab.) production in the traditional and improved-traditional ghers of Bangladesh

On-farm research on enhancement of P. monodon production through water quality management was carried out in five ghers of Paikgacha, Khulna. Based on the prevailing condition of the ghers, lime in the form of CaCO(sub 3), urea and TSP were used as the major inputs to minimize the soil-water acidity and to ensure the availability of natural food particles in the water bodies. Exchange of water at required level also practiced for the qualitative improvement of culture water. Ghers of varying sizes showed that water quality management and fertilization have a positive impact on production performance of P. monodon (61.59% increment) that yielded an average production of 385.43 kg/ha/crop against the present traditional rate of 238.50 kg/ha/year.

The effect of dopants on the twist elastic constant and the rotational viscosity coefficient for nematics

The twist elastic constant, K2, and the rotational viscosity coefficient, γ1, are of importance when the response lime for the in-plane switching mode is studied. Since adding dopants is one technique to improve the response characteristics, the effect of dopants on these physical properties is significant. The effect on K2 and γ1 of adding alkyl(alkoxy) phenylcyclopentenones and alkyl(alkoxy) cyanobiphenyls to the base mixture ZLI-4792 together with their temperature dependence have been investigated using different temperature scales. The reduced temperature scale showed the effect of these dopants on K2 is small. On the other hand, the temperature dependence of γ1 depends on both the absolute temperature scale and the reduced temperature scale. Therefore, it is clear that the choice of temperature scale with which to compare γ1 for different systems raises fundamental questions which way not have a unique answer. 2000 OPA (Overseas Publishers Association) N.V. Published by license under the Gordon and Breach Science Publishers imprint.

Input-output relationship and economics of pangas monoculture and carp-pangas polyculture in two districts of Bangladesh

An attempt was made to study the input-output relationships and economics of pangas monoculture and carp-pangas polyculture in Bangladesh. By analyzing the data collected from 50 pangas farms and 55 carp-pangas farms, the study has investigated the production systems of two technologies and the effects of fingerling stocking and applications of feed and fertilizer on fisheries income. The data were collected from the fishermen of Trishal and Bhaluka of Mymensingh district, and Kahaloo and Adamdighee of Bogra district during 2001-02. For pangas monoculture, the stocking density was 31,561 per ha while it was 55,017 per ha in carp-pangas polyculture. Most of the farmers used urea, TSP and lime before stocking. Rice and wheat bran happened to be the most common feed ingredients for both types of culture in general. Other important ingredients used were mustard oil-cakes, rice polish, wheat flour, fish meal, bone meal, soybean meal and poultry litter. In terms of quantities, rice bran and wheat bran dominated the farmers list. Rice and wheat bran together constituted about 60% of all studied feeds. Feed cost constituted 59.13% of total costs for pangas monoculture and 67.44% for carp-pangas polyculture. Per ha productions of pangas and carp-pangas in a single culture cycle were 15,508 kg and 19,745 kg, respectively. Per ha gross profits were estimated to be Tk 310,311 and Tk 464,418 for pangas monoculture and carp-pangas polyculture, respectively. Net profit appeared to be Tk 264,216 per ha for pangas monoculture and Tk 416,509 per ha for carp-pangas polyculture. The BCRs calculated were 1.46 and 1.68 for monoculture and polyculture, respectively. The break-even costs per kg of fish were estimated at Tk 36.93 for pangas and Tk 30.93 for mixed species which was much lower than the prices the producers received. Break-even productions were estimated at 10,702 kg per ha for pangas monoculture and 11,784 kg per ha for carp-pangas polyculture. Fingerling and feed cost, and pond size significantly explained the variation of income from pangas monoculture. These factors have significantly influenced the income from the crop. Functional analysis shows that 1% increase in the feed cost might increase 0.51% of pangas income and 0.41% in carp-pangas income. No other inputs had shown this much of responses to increasing income from a fish.

Management of euglenophytes in aquaculture ponds for improvement of fish production

Four experiments each with three replications were conducted in 12 experimental ponds to control the euglenophytes bloom viz. treatment 1 (T1, covering of one third of the water surface by duckweed (Lemna minor); treatment 2 (T2), application of 123.5 kg lime/ha/month; treatment 3 (T3), use of both duckweed as in T1 and lime as in T2; treatment 4 (T4) was considered as control where neither duckweed nor lime was applied. Fishes comprising of rohu (Labeo rohita), catla (Catla catla), mrigal ( Cirrhinus cirrhosus), silver carp (Hypophthalmichthys molitrix) and silver barb (Barbonymus gonionotus) were stocked at the rate of 1080 fishes/ha with the species ratio of 8:4:6:9:13, respectively. The lowest cell density of euglenophytes was found in the ponds of T3 followed by T2, and T1. In the ponds of T3, euglenophytes bloom did not occur possibly due to alkaline pH, shade and nutrient absorption by duckweed. Thin bloom was observed in the ponds of T1 where pH was neutral or slightly alkaline. The grazing on euglenophytes by the silver carp and silver barb also had some contribution in controlling the bloom. Growth of fishes was comparatively higher in the ponds of T3 and T1, which might be due to better water quality and availability of adequate food while the lower fish growth as recorded from the ponds of T4 might be due to euglenophytes bloom. Thick bloom inhibited light penetration which hampered photosynthesis and growth of other phytoplankton that are the preferred food of planktivorous fishes. Mortality of fishes in ponds having euglenophytes bloom was possibly due to formation of anoxic situation in the early morning or due to the combined effect of anoxic situation and toxic metabolites secretion by the euglenophytes.