The future of distance education : reformed, scrapped or recycled

A mass of under-educated people, an expanding population, major global crises and an expanding knowledge economy all combine to sustain a massive demand for basic, further, higher, continuing and lifelong education.This demand cannot be met solely in the world’s classrooms; even if there were enough classrooms, many people will be unwilling or unable to attend them to learn. In this sense, distance education is essential for the future, but the fluidity around educational terms and practices means that it is also quite possible that ‘distance education’—the term and its history—will be towed to the scrap yard for many of its useful parts to be recycled. This chapter considers three key elements of distance education—technology, students and educational institutions—and the educational possibilities that surround them by reflection on past and present changes. The future of distance education is intimately connected to broader social, economic and cultural changes. These changes are strongly influenced by the ‘disruptive’ technologies, demographic transformations in the nature of distance learners and the pressures of global techno-capitalism on educational institutions.

Performance comparison of abrasion resistant textile motorcycle clothing

 Falling at speed onto a tarmac surface during cycling can cause abrasion and laceration of the skin and body tissue. Motorcycle clothing designed to reduce or avoid this type of injury has traditionally been made of animal leather as it has well known resistance to abrasion. In the last 20 years there has been an emergence of textile clothing reinforced with high performance/tenacity fibres such as those made from polyamides, aramids, ultra high molecular weight polyethylene and liquid crystal. Almost no comparative work has been undertaken to provide insight into the level of protection these clothing layers can provide.
This work has used a CE standard test method to evaluate a number of abrasion resistant textile pant products and compare them with a leather race product. It analysed the protective fabric layer structure for mass, thickness, construction method and resistance to abrasion.
Structures manufactured from high tenacity fibres performed better than those from lower tenacity ones. Fabric construction method and mass per unit area were the two key variables in providing an abrasion protective layer. Structures manufactured from knitted para-aramid fibres performed better than their woven counterparts due to the method of fabric failure. Several well designed protective layers performed at a similar level to that of leather; however, most garments tested failed to meet the lower level European standard of abrasion resistance (CE level 1), which may put their wearer at risk in the advent of a collision.

Ah, Libraries: How I Love the Smell of... Electronic Access?!

In the olden days, we Baby-Boomers would walk into our university or college libraries and pause just long enough to take in that wonderful smells of high grade cowhide leather and aging papyrus before rushing off to study. There was something about opening any leather bound edition of anything and being transported by the smell to some distant land, not unlike Charles Swann in Marcel Proust’s famous French novel, A La Recherché du Temps Perdu, Remembrance of Things Past.

The online distribution strategy of luxury products and their vertical extensions

Uma importante tendência do mercado de luxo é a extensão de marca em um novo segmento de mercado por meio da chamada extensão vertical, que pode ser para cima ou para baixo. Em outras palavras, significa que a organização passa a atuar em um novo segmento dentro de uma mesma categoria de produtos, mas com diferente público-alvo que sua marca original. Nesse processo, a empresa inicia atividade em um novo segmento com diferente nível de luxo. A distribuição é um aspecto fundamental do composto de Marketing e a importância da internet como canal de distribuição dessa indústria tem aumentado expressivamente nos últimos anos. Dessa forma, faz-se necessário compreender como as marcas de luxo gerenciam suas estratégias de distribuição online quando desenvolvem processos de extensão de marca e penetração em novos segmentos. Com o objetivo de analisar a estratégia de distribuição da indústria de luxo, um estudo exploratório foi desenvolvido focando bens de luxo pessoal (em categorias como costura, relógios & jóias, couro e sapatos). Uma amostra significativa constituída de marcas originais e suas extensões foi analisada para constituir um modelo comparativo entre duas variáveis: o nível de diferenciação entre os canais de distribuição da marca original e suas extensões; e a distância entre as próprias marcas no que concerne ao seus posicionamentos. Esse estudo contribui para o entendimento da dinâmica de distribuição do mercado e colabora com a compreensão do comportamento das empresas que atuam nele, dependendo do tipo de extensões que elas desenvolvem e da forma como elas são conduzidas.

Vegetable-origin foam employed in dye extraction in tanning and leather processing facilities

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Cytotaxonomic analysis of Brazilian species of the genus Amazona (Psittacidae, Aves) and confirmation of the genus Salvatoria (Ribeiro, 1920)

The karyotypes of 12 species of Psittacidae of the genus Amazona were studied: A. aestiva, A. amazonica, A. brasiliensis, A. autumnalis, A. farinosa, A, festiva, A. kawalli, A. ochrocephala, A. pretrei, A. rhodocorytha, A. vinacea and A. xanthops. The metaphases were obtained using a short term culture of leather pulp. Eleven of the twelve analyzed species were karyotypically homogeneous, with only a few divergences in chromosomes 2 and 3. The species A. xanthops showed large karyotypic differences compared to the genus Amazona. Consequently, the genus Salvatoria (Ribeiro, Rev. Mus. Paul. 12: 1-82, 1920) was confirmed, and A. xanthops renamed Salvatoria xanthops. The study showed the chromosomic conservation of the genus Amazona and the need for further taxonomic studies of the karyotype of the Psittacidae.

Development of a voltammetric sensor for chromium(VI) determination in wastewater sample

Screen-printed carbon electrode (SPCE) modified with poly-L-histidine film can be successfully applied for chromium(VI) determination based on its pre-concentration. Optimum adherence and stability of the POIY-L-histidine film was obtained by direct addition of PH solution 1% (w/v) on the electrode surface, followed by heating at 80 degrees C during 5 min. Linear response range, sensitivity and limit of detection were 0. 1-150 [mu mol L-1, 4. 13 LA mu mol L` and 0.046 mu mol L-1. The repeatability of the proposed sensor, evaluated in terms of relative standard deviation, was measured as 3.2% for 10 experiments in 40 mu mol L-1 using the same electrode and 4.0% using screen-printed electrode as disposable sensor, respectively. The voltammetric sensor was applied to determination of Cr(VI) and indirect determination of Cr(III) in wastewater samples previously treated by a leather dyeing industry and the average recovery for these samples was around 97%. (C) 2006 Elsevier B.V. All rights reserved.

Bioremediation of direct dyes in simulated textile effluents by a paramorphogenic form of Aspergillus oryzae

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Barriers to environmental management in clusters of small businesses in Brazil and Japan: from a lack of knowledge to a decline in traditional knowledge

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Screen-printed carbon electrode modified with poly-L-histidine applied to voltammetric determination of chromium (VI)

The present work reports the use of a screen-printed carbon electrode (SPCE) modified by poly-L-histidine film to determine chromium (VI). Stable films can be formed by direct addition of PH solution 1 % (w/v) on the electrode surface, followed by heating at 80°C during 5 min. Calibration curves can be constructed for Cr(VI) from 1.0 × 10-5 mol L-1 to 7.0 × 10-5 mol L-1 Cr (VI) in acetate buffer pH 4 using a preconcentration step of 60s at open circuit potential. A relative standard deviation of 3.2% was for five determination of 4.0 × 10 -5 mol L-1 Cr (VI). The method was successful applied to determination of Cr(VI) in wastewater samples from a leather dyeing industry. copyright The Electrochemical Society.

Production and partial characterization of keratinase produced by a microorganism isolated from poultry processing plant wastewater

A Streptomyces was isolated from poultry plant wastewater, showed high keratinolytic activity when cultured on feather meal medium. Optimum keratinolytic activity was observed at 40°C and pH 8.0. The enzyme also showed to be stable between 40 and 60°C. The keratinolytic activity was not inhibited by EDTA, DMSO and Tween 80. On the other hand, CaCl2, ZnCl2, and BaCl2 slightly inhibited the keratinolytic activity. The Streptomyces isolated might be useful in leather, keratin waste treatment, animal feeding industry, and also cosmetic industry. © 2008 Academic Journals.

Keratinase production by new strain of Bacillus Amyloliquefaciens: Application of statistical experimental design for optimization of keratinase production

Feathers are rich in amino acids and can be employed as a dietary protein supplement for animal feed. Microbial degradation is an alternative technology for improving the nutritional value of feathers. Other potential applications of keratinase include use in the leather industry, detergents and medicine as well as the pharmaceutical for the treatment of acne, psoriasis and calluses. A new keratinolytic enzyme production bacterium was isolated from a poultry processing plant. To improve keratinase yield, statistically based experimental designs were applied to optimize three significant variables: temperature, substrate concentration (feathers) and agitation speed. Response surface methodology demonstrated an increase in keratinolytic activity at temperature, agitation speed and substrate concentration of 26.6°C, 150 rpm and 2%, respectively. Liquid chromatography revealed the release of amino acids in the Bacillus amyloliquefaciens culture broth, thereby demonstrating the potential of feather meal in the animal feed industry. © Global Science Publications.

Allometry of Organs and the Gastrintestinal Tract from Water Buffaloes (Bubalus bubalis) Finished in Feedlot

The objective of present study was to evaluate the relative growth of organs and viscera from water buffaloes. Fifteen Mediterranean intact males, averaging, 356.7 kg initial live weight and twenty four months of age, were used. The animals were ramdomly assigned into three groups (categories). One group was ramdomly assigned to immediate slaughter (AR), the rest two groups were full-fed a ration containing 50% concentrate, dry matter basis until reaching the slaughter weights of 450 and 500kg, respectively. At slaughter the empty body weight was determined and the weights of head, feet, leather, lungs, heart, liver, spleen, rumen-reticulum, omasum, abomasum, small intestine, large intestine were recorded. Regression equations of log weight of organs and viscera as a function of log empty-body-weight (EBW), were fitted. All body components studied, with exception of liver and spleen, developed slower than in relation to EBW.

An innovative material based on natural rubber and leather tannery waste to be applied as antistatic flooring

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bioremediation of direct dyes in simulated textile effluents by paramorphogenic form of Aspergillus oryzae

Azo dyes are extensively used for coloring textiles, paper, food, leather, drink, pharmaceutical products, cosmetics and inks. The textile industry consumes the largest amount of azo dyes, and it is estimated that approximately 10 - 15% of dyes used for coloring textiles might be lost in waste streams. Almost all azo dyes are synthetic and resist biodegradation, however, they can be readly reduced by a number of chemical and biological reducing systems. Biological treatment is advantageous over physical and chemical method as result of its low cost and little disturbance to the environment. This research focuses on the utilization of Aspergillus oryzae, to remove some kinds of azo dyes from aqueous solutions. The fungi, physically induced in its paramorphogenic form (called, pellets), were used in the dyes biosorption studies with both non autoclave and autoclaved hyphas, at differents pH values. Thus the goals are the removal of dyes by biosorption and the decrease of its toxicity.