Coca cola hbc italia: Modello per il calcolo di inventory stock target e production cycles ottimali

Approccio unificato alla gestione e alla valutazione del planning in stabilimenti e magazzini, presso Coca Cola HBC Italia

Quality assurance systems in the production and marketing of fresh peaches.

Due to the fast rate of peach post-harvest ripening, damage due to mechanical handling, externally appreciated as bruises and soft areas, is a real problem that leads to an early harvesting and poor quality of the fruits, as perceived by the consumers. More and more, the European consumer asks for good taste and freshness of fruits and vegetables, and these quality factors are not included in standards, nor in most of the producers' practices. Fruit processing and marketing centres (co-operatives) are increasingly interested in adopting quality controls in their processes. ISO 9000 procedures are being applied in some food areas, primarily milk and meat processors, but no generalised procedures have been developed until the present time to be applied to fresh product processes. All different peach and nectarine varieties that are harvested and handled in Murcia cooperatives and sold in a large supermarket in Madrid were analysed during the whole 1997 season (early May to late August). A total number of 78 samples of 25 fruits (co-operative) or 10 fruits (market), were tested in the laboratory for mechanical, optical, chemical and tasting quality. The variability and relationships between all these quality parameters are presented and discussed, and sampling unit sizes which would be advisable for quality control are calculated.

Responses in carcass lean pH at 24 hours post-mortem in lines of Large White pigs selected for growth rate on a fixed ration over a set time

A restricted maximum likelihood analysis applied to an animal model showed no significant differences (P > 0.05) in pH value of the longissimus dorsi measured at 24 h post-mortem (pH24) between high and low lines of Large White pigs selected over 4 years for post-weaning growth rate on restricted feeding. Genetic and phenotypic correlations between pH24 and production and carcass traits were estimated using all performance testing records combined with the pH24 measurements (5.05–7.02) on slaughtered animals. The estimate of heritability for pH24 was moderate (0.29 ± 0.18). Genetic correlations between pH24 and production or carcass composition traits, except for ultrasonic backfat (UBF), were not significantly different from zero. UBF had a moderate, positive genetic correlation with pH24 (0.24 ± 0.33). These estimates of genetic correlations affirmed that selection for increased growth rate on restricted feeding is likely to result in limited changes in pH24 and pork quality since the selection does not put a high emphasis on reduced fatness.

Green as the new Lean:how to use Lean practices as a catalyst to greening your supply chain

The aim of this research paper is to explore and evaluate previous work focussing on the relationship and links between Lean and Green supply chain management practices. Several explanatory frameworks are explored and discussed. It is intended that evidence and insights can be developed and used: (a) to assist our understanding of where Lean practices are synergistic for Green; (b) to clarify if Green practices are synergistic for Lean; and (c) to identify opportunities for companies to use their Lean framework as a catalyst to making their processes Green. The paper provides evidence suggesting that Lean is beneficial for Green practices and the implementation of Green practices in turn also has a positive influence on existing Lean business practices. © 2010 Elsevier Ltd. All rights reserved.

Aspects of the design and operation of production control systems in manufacturing industry

Computerised production control developments have concentrated on Manufacturing Resources Planning (MRP II) systems. The literature suggests however, that despite the massive investment in hardware, software and management education, successful implementation of such systems in manufacturing industries has proved difficult. This thesis reviews the development of production planning and control systems, in particular, investigates the causes of failures in implementing MRP/MRP II systems in industrial environments and argues that the centralised and top-down planning structure, as well as the routine operational methodology of such systems, is inherently prone to failure. The thesis reviews the control benefits of cellular manufacturing systems but concludes that in more dynamic manufacturing environments, techniques such as Kanban are inappropriate. The basic shortcomings of MRP II systems are highlighted and a new enhanced operational methodology based on distributed planning and control principles is introduced. Distributed Manufacturing Resources Planning (DMRP), was developed as a capacity sensitive production planning and control solution for cellular manufacturing environments. The system utilises cell based, independently operated MRP II systems, integrated into a plant-wide control system through a Local Area Network. The potential benefits of adopting the system in industrial environments is discussed and the results of computer simulation experiments to compare the performance of the DMRP system against the conventional MRP II systems presented. DMRP methodology is shown to offer significant potential advantages which include ease of implementation, cost effectiveness, capacity sensitivity, shorter manufacturing lead times, lower working in progress levels and improved customer service.

Searching for lean white-collar workers

The purpose of this research has been to investigate the extent to which Lean techniques have been applied to indirect or White Collar activities within manufacturing operations. The work has been based on a systematic review of the literature and six UK based case studies. Both are described in the paper. The findings from this work include, for example, that there are few reports off the application of Lean in this context. The more substantive papers focus on NPI and Project Management, where as, Support and ‘Front Office’ activities are covered only briefly in ‘trade journal’ articles. These do demonstrate that Lean techniques can be applied successfully to non-production related activities, and there are significant opportunities for work in this area. However, the definition of Lean is evolving and practitioners do not share a common understanding of terminology. This may undermine their accuracy when reporting the application of Lean techniques.

Towards the strategic adoption of Lean in aviation Maintenance Repair and Overhaul (MRO) industry:an empirical study into the industry's Lean status

Purpose - Despite many Maintenance Repair and Overhaul (MRO) organisations alluding their positive business performances to the adoption Lean initiatives, there is a paucity of direct literature that validates this assertion. Thus, the purpose of this paper is to study empirically via the use of an industry-wide survey to establish and extent of Lean adoption and to verify its suitability in mitigating prevalent MRO challenges. Design/methodology/approach - The empirical study contained in this paper is facilitated by an industry-wide survey to collect data from several firms across the MRO spectrum. The analysed responses from industry leaders, professionals and executives synthesised with existing literature was used in ascertaining the extent of Lean adoption within the operational framework of the industry. Findings - The empirical study helped in validating the suitability of Lean in MRO context. However, it was also observed that the focus of its application was skewed towards its production-orientated functions more than its service-orientated functions. Nonetheless, this paper presents results of the positive influence of Lean in MRO context. Research limitations/implications - This empirical study presented in this paper was carried out within a framework of key characteristics of operation. Although this approach is sufficient in assessing the industry's Lean status, further assessment can also be achieved within the context of relevant performance metrics which was not included in this paper. Practical implications - By exploring the industry's Lean status within the context of operational characteristics of operation, this study provides MRO practitioners with more awareness into some of the critical factors required for successful holistic Lean realisation. Social implications - The state-of-the-art of Lean within the aviation MRO context established through this research also contributes to the wider product-centric service environment by providing a platform that facilitates strategy development which ensures Lean success within this environment. Originality/value - Apart from validating the suitability of Lean in MRO contexts, by establishing the extent of Lean adoption within the context of the operational framework, this paper provides a clearer insight as to how successful Lean implementation can be achieved via a holistic implementation strategy balanced between the product-centric and service-centric aspects of the industry.

Revisiting the lean agile paradigm:an empirical study in the aerospace industry

Much has been written about the potential impact of Lean Agile paradigm on firm's supply chain performance. However, most of the existing studies mainly pointed out Lean is for cost reduction, whereas Agility is for attaining flexibility. There are little empirical studies in literature that examined how Lean Agile paradigm impacts on supply chain performance. This paper aims to address this gap by studying the influence of Lean and Agility paradigms on a single commodity supply chain delivery performance in the aerospace industry. Data was collected from four separate 'Rigid pipes' supply chains to study how manufacturing alignment impacts on the delivery performance. Implications of the study to practitioners and academia are discussed and future research outlined.

Bevezetés a lean menedzsmentbe – a lean stratégiai alapjai = Introduction to lean management – basic strategic elements of lean

A lean menedzsment az értékteremtő folyamatok stratégiai és operatív szintjének meghatározó formálójává vált az elmúlt évtizedekben. Jelen tanulmány stratégiai nézőpontból tárgyalja a lean menedzsment teljes bevezetését. Részletes áttekintést ad a Womack és Jones (2003) által lefektetett lean alapelvekről. Az operatív teljesítményjavulásból származó vevői értékteremtés mellett foglalkozik a tulajdonosi értékteremtéssel, az MRP és a lean szinergikus összekapcsolásával, valamint a lean ideális szervezeti környezetével is. A lean a kapcsolódó területek illesztését is megköveteli, a műhelytanulmány röviden kitér az emberi erőforrás, a teljesítménymérés, az ellátási lánc és a termékfejlesztés legfontosabb kérdéseire. = Lean management has become the dominant strategic and operative framework of value creating processes in the last decades. The working paper describes the strategic approach of full lean implementation. It is mainly built on Womack and Jones’s (2003) lean principles. Beside the five lean principles the study is concerned with customer and shareholder value creation, touches upon the relationship of lean and MRP, and describes ideal lean organizational environment. Lean redesigns value creating processes and requires functional fit of related departments, so the most important issues of human resource, performance, supply chain management and product design are discussed as well.

Factors influencing employee perceptions in lean transformations

The purpose of the study was to investigate employee perceptions during a lean transformation1. The combination of case study and survey methodologies was used to define elements influencing the perceived lean success of shop floor employees. According to our findings, belief, commitment, work method and communication all have a considerable direct impact on workers’ perceptions of lean success. However, their effects are very different based on the scope and focus of changes that is influenced by process characteristics. Perceptions regarding successful lean transformation during a moderate reorganisation of the company’s welding plant, where mainly males work, are affected only by commitment and work method, whereas the deep reorganisation of the sewing plant (populated by female employees) is only influenced by belief and communication.

A beosztás és a nemek hatása a változások érzékelésére egy lean projekt tapasztalatai egy magyar autóipari beszállítónál (Efficient possibilities of the customer complaints: compensation and apology)

Tanulmányukban a szerzők egy magyar tulajdonú autóipari beszállító lean (továbbiakban karcsú) átalakulását vizsgáljuk. Bár az új rendszer bevezetése alig több mint egy éve kezdődött el a vállalatnál, mégis a rövid idő ellenére komoly eredményekről számolhatnak be. Különösen látványos a pénzügyi mutatók és a vevői elégedettség területén elért javulás. Kutatásuk célja kettős volt: (1) megvizsgálni, hogyan érzékelik a vezetők és a beosztottak a változásokat, valamint (2) összehasonlítani a vállalat két üzemében dolgozó nők és férfiak átalakítással kapcsolatos reakcióit és érzeteit. Az eredmények alapján elmondható, hogy a vezetők és a beosztottak, csakúgy, mint a két nem képviselői, nagyon eltérően gondolkodnak a változásokról és az átalakítás sikerének hátteréről. Eredményeik tükrében megállapítható, hogy a vizsgált szervezetnél a női munkavállalóknál a hit, a férfiaknál az elkötelezettség az a tényező, amely leginkább hatással van a sikerérzetre. A kutatás tapasztalatait felhasználva tanácsokat fogalmaznak meg a karcsú menedzsment sikeres bevezetésével kapcsolatosan. ______________ Relatively little research attention has been given to what happens after service failure, how the organizations respond to the failure and how this response affects customers’ subsequent behaviours and attitudes. This article proposes to take an in-depth look at the different organizational responses to customer complaints. On the basis of the equity theory the concept of justice has been used that involves distributive, procedural and interactional justice. Using 2x2x2 factorial design experiment based on scenarios the main findings of the research is that interactional justice (explanation and apology) is as important as distributive justice (compensation). On the other hand the result is dependent on the failure type: different recovery effort is efficient in the case of outcome or process failure.

Leadership jellemvonások és lean menedzsment – elmélet és gyakorlat = Leadership attributes and lean management in theory and practice

A műhelytanulmány két kutatási kérdést vizsgál. Egyrészt kiemelt szakirodalom alapján megvizsgálja, hogy az elméleti ajánlások milyen vezetési stílust és vezetői stílusjegyeket fogalmaznak meg követendőnek egy lean vállalat számára. Másrészt megvizsgálja, hogy a lean menedzsment gyakorlatának alkalmazásában fejlettebb vállalatok vezetői valóban az irodalom által javasolt, kívánatosnak tekintett vezetői stílusjegyeket tekintik-e pozitívnak. Vizsgálatunkat a Versenyképesség Kutató Központ 2009-es kérdőívének adatbázisán végeztük el, melyben mintegy 300 vállalat négy vezetőjének válaszai állnak rendelkezésre. A rendelkezésre álló mintából mi az 50 fő feletti foglalkoztatottal rendelkező, feldolgozóipari vállalatokra fókuszáltunk, esetükben elemeztük a vezérigazgató és a termelésvezető által követendőnek, jónak tartott vezetői stílusjegyek alkalmazását. ----- Abstract: The working paper focuses on two connected research quesions: Ono ne hand based on selected literature it systematically looks at the ideal leadership style and connected leader attributes that help in transforming a company into a real lean organization. On the other hand the paper analyzes whether leaders of companies with more developed lean practice do or do not follow these leadership related suggestions formulated in the literature. The study uses the fourth round of the Hungarian Competitiveness Research Survey from 2009. The survey has 300 valid observations. Four different respondents in each company filled in questionnaires, all of them were top managers (CEO, marketing /sales, finance, production). Plants were quite different alongside the most important organizational dimensions (volume, number of employee, industry, ownership). Previous researches pointed out that lean management is more likely applied by larger manufacturer. Hence, this study is limited to the analysis of questionnaires filled in by producers that have more than 50 employees. We analyze the leadership styles of two managers, namely the CEO and production manager.

The impact of lean practices on inventory turnover

Lean manufacturing (LM) is currently enjoying its second heyday. Companies in several industries are implementing leanpractices to keep pace with the competition and achieve better results. In this article, we will concentrate on how companies can improve their inventoryturnover performance through the use ofleanpractices. According to our main proposition, firms that widely apply leanpractices have higher inventoryturnover than those that do not rely on LM. However, there may be significant differences in inventoryturnover even among lean manufacturers depending on their contingencies. Therefore, we also investigate how various contingency factors (production systems, order types, product types) influence theinventoryturnoveroflean manufacturers. We use cluster and correlation analysis to separate manufacturers based onthe extent of their leanness and to examine the effect of contingencies. We acquired the data from the International Manufacturing Strategy Survey (IMSS) in ISIC sectors 28–35.