The potential of electrospinning in rapid manufacturing processes

We review the process of electrospinning and how this new technique for generating a rich morphology of nano and micro scale fibres sits alongside established procedures for rapid manufacturing. We introduce the key elements of electrospinning and how these influence the nature and distribution of the fibres produced. We describe the range of polymers available for electrospinning and the limitations to the use of these materials. Using this base we review the potential approaches to using electrospinning as part of a broader rapid manufacturing system and the possible applications for such a hybrid system.

Change, rigidity & delay in the UK system of land-use development control

The British system of development control is time-consuming and uncertain in outcome. Moreover, it is becoming increasingly overloaded as it has gradually switched away from being centred on a traditional ‘is it an appropriate land-use?’ type approach to one based on multi-faceted inspections of projects and negotiations over the distribution of the potential financial gains arising from them. Recent policy developments have centred on improving the operation of development control. This paper argues that more fundamental issues may be a stake as well. Important market changes have increased workloads. Furthermore, the UK planning system's institutional framework encourages change to move in specific directions, which is not always helpful. If expectations of increased long-term housing supply are to be met more substantial changes to development control may be essential but hard to achieve.

A real-time measurement system for long-life flood monitoring and warning applications

A flood warning system incorporates telemetered rainfall and flow/water level data measured at various locations in the catchment area. Real-time accurate data collection is required for this use, and sensor networks improve the system capabilities. However, existing sensor nodes struggle to satisfy the hydrological requirements in terms of autonomy, sensor hardware compatibility, reliability and long-range communication. We describe the design and development of a real-time measurement system for flood monitoring, and its deployment in a flash-flood prone 650 km2 semiarid watershed in Southern Spain. A developed low-power and long-range communication device, so-called DatalogV1, provides automatic data gathering and reliable transmission. DatalogV1 incorporates self-monitoring for adapting measurement schedules for consumption management and to capture events of interest. Two tests are used to assess the success of the development. The results show an autonomous and robust monitoring system for long-term collection of water level data in many sparse locations during flood events.

Contrasting behaviour of cadmium and zinc in a soil–plant–arthropod system

This study investigates the transfer of Cd and Zn from a soil amended with sewage sludge at rates up to 100 t ha(-1) through a multi-trophic system consisting of barley, the aphid Sitobion avenae and the larvae of the lacewing Chrysoperla carnae. Results show marked differences in the transfer of the two metals. Cadmium was freely accumulated in barley roots, but accumulation in the shoot was restricted to a concentration of around 0.22 mg kg(-1) (dry weight). This limited the transfer of Cd to higher trophic levels and resulted in no significant accumulation of Cd in S. avenae or in C. carnae. Zinc transfer in the system was largely unrestricted, resulting in significant accumulation in roots and shoots, in S. avenae and in C. carnae. Cadmium biomagnification occurred in lacewing pupae, with concentrations up to 3.6 times greater than in aphids. S. avenae biomagnified Zn by a factor of ca. 2.5 at low sludge amendment rates, but biomagnification decreased to a factor of 1.4 at the highest amendment rate. Biomagnification of Zn did not occur in C. carnae, but concentrations were up to 3.5 time higher than in soil. Results are discussed in light of the mechanisms regulating transfer of the two metals in the system.

Real-Time Recognition System for Traffic Signs

The aim of this thesis project is to develop the Traffic Sign Recognition algorithm for real time. Inreal time environment, vehicles move at high speed on roads. For the vehicle intelligent system itbecomes essential to detect, process and recognize the traffic sign which is coming in front ofvehicle with high relative velocity, at the right time, so that the driver would be able to pro-actsimultaneously on instructions given in the Traffic Sign. The system assists drivers about trafficsigns they did not recognize before passing them. With the Traffic Sign Recognition system, thevehicle becomes aware of the traffic environment and reacts according to the situation.The objective of the project is to develop a system which can recognize the traffic signs in real time.The three target parameters are the system’s response time in real-time video streaming, the trafficsign recognition speed in still images and the recognition accuracy. The system consists of threeprocesses; the traffic sign detection, the traffic sign recognition and the traffic sign tracking. Thedetection process uses physical properties of traffic signs based on a priori knowledge to detect roadsigns. It generates the road sign image as the input to the recognition process. The recognitionprocess is implemented using the Pattern Matching algorithm. The system was first tested onstationary images where it showed on average 97% accuracy with the average processing time of0.15 seconds for traffic sign recognition. This procedure was then applied to the real time videostreaming. Finally the tracking of traffic signs was developed using Blob tracking which showed theaverage recognition accuracy to 95% in real time and improved the system’s average response timeto 0.04 seconds. This project has been implemented in C-language using the Open Computer VisionLibrary.

Simulation-based support tool for operator performance in batch manufacturing

In industry, the workload and utilization of shop floor operators is often misunderstood. In this paper, we will present several real case studies, using Discrete Event Simulation (DES) models, which allow us to better understand operators in a batch manufacturing environment. The first study investigates labour in a machining plant consisting of multiple identical CNC machines that batch produce parts. The second study investigates labour in an eight station, gravity die casting rotary table. The results from these studies have shown that there can be potential improvements made by the production planners in the current labour configuration. In the first case study, a matrix is produced that estimates what the operator's utilization levels will be for various configurations. From this, the preferred operator to machine ratio over a range of cycle times is presented. In the second study, the results have shown that by reducing the casting cycle time, the operator would be overloaded. A discrete event simulation of these two cases highlighted areas that were misunderstood by plant management, and provided them with a useful decision support tool for production planning.

Productivity growth and efficiency change in Malaysian manufacturing: recent evidence from disaggregated data

This paper estimates productivity growth in Malaysian manufacturing over the period 1983-1999. Malmquist productivity Indices (MPIs) have been computed using non parametric Data Envelopment Analysis (DEA) type linear programming, which show productivity growth sourced from efficiency change and growth in technology. Unlike previous studies, this study identifies the sources of productivity growth in Malaysian manufacturing industries at the five digit breakdown of Malaysian Standard Industrial Classification (MSIC) thereby revealing more industry specific efficiency and technical growth patterns. Results indicated that a high majority of the industries operated with low levels of technical efficiency with little or no improvement over time. Growth estimates revealed that two third of the industries (76 out of total 114 categories) experienced average annual productivity improvement ranging from 0.1% to 7.8%. Average annual technical progress was recorded by 95 industry categories while technical efficiency improvement was achieved by 53 industries. Overall yearly average indicated relatively low productivity growth from the mid 1990’s onwards caused by either efficiency decline or technical regress. Summary results for industries showed that some of the high rates of productivity growth have been recorded in glass and glass products (7.3%), Petroleum and coal (7.2%), industrial chemicals (4.9%) contributed from both efficiency improvement and technical progress ranging from 0.8% to 5.4% and from 1.7% to 4.1%, respectively. These results are expected to have some implications for ongoing and future strategic policy reform in Malaysian manufacturing generating a more sustainable growth for specific industry categories.

MRP-production planning in agile manufacturing

The research studied a production planning problem in a manufacturing firm. Some production planning software was developed that enabled the efficient and rapid reproduction of an optimum production forecast. Not only was the production cost reduced but a significant length of planning time cn be saved using the software.

Analysing business processes to manage and resolve strategic issues in a manufacturing business

This paper demonstrates the value of applying heuristics to knowledge systems of business processes in a manufacturing company to resolve strategic issues and enable the attainment of strategic business goals. The manufacturing company was losing market share through not being able to get its new products to market quickly enough. The research illustrates the ‘location’ and use of information systems in a manufacturing context. The researchers collected the specific business process knowledge in the company and developed a knowledge management system and then applied heuristics to the ‘AS IS’ manufacturing process to determine better models of manufacturing that would enable faster to market product development and thus enable better strategic alignment between company expectations and realisation of market share. The paper highlights the strategic use of information systems as a means of directly solving business problems.

Effects of load modeling in power distribution system with distributed wind generation

This paper presents the impact of different types of load models in distribution network with distributed wind generation. The analysis is carried out for a test distribution system representative of the Kumamoto area in Japan. Firstly, this paper provides static analysis showing the impact of static load on distribution system. Then, it investigates the effects of static as well as composite load based on the load composition of IEEE task force report [1] through an accurate time-domain analysis. The analysis shows that modeling of loads has a significant impact on the voltage dynamics of the distribution system with distributed generation.

Collective bargaining in Brazilian manufacturing, 1978-95

Collective bargaining, it is widely claimed, has been on the increase in Brazil since the late 1970s. This is seen as part of a broader change in Brazilian industrial relations towards a hybrid system of interest representation, in which elements of both the old state corporatism and pluralism now coexist. However, there is little or no systematic empirical evidence available to support this conclusion. This thesis addresses the question of the strengthening of collective bargaining as a method of job regulation in Brazil by providing a detailed empirical study. The questions of this study are: (a) how important has collective bargaining become in establishing provisions on the terms and conditions of the employment relationship which are not simply reproducing rules established via state regulation?; and (b) what factors accounted for changes in the content of these provisions? An analysis of 10,734 provisions in 287 collective agreements in manufacturing industries in the Metropolitan Area of Porto Alegre, the capital of the southernmost state of Rio Grande do Sul, was carried out for the period of 1978-95. This analysis offers support for the thesis that the significance of collective bargaining has increased. It shows that: (a) most substantive provisions created rules that were not established in other forms of regulation; (b) provisions that replicate the contents of regulatory legislation accounted for one out of seven substantive provisions, but in spite of being a copy of the law, these provisions are not entirely neutral for job regulation; (c) collective agreements also laid down substantive provisions benefiting employers, and not simply employees; and (d) the pace of change in bargaining outcomes oscillated with changes in the economic, legal and judicial contexts. This pace of change was mostly affected by (i) the rate of unemployment, (ii) the degree of openness of the economy to foreign competition, (iii) the capacity of employers to pass on costs to costumers, (iv) stabilisation policies aimed at curbing inflation, (v) the Federal Constitution made in 1988, (vi) the official rate of minimum wages, and (vii) the conduct of the labour judicial system in settling collective disputes.

Applying DEMO to model and automate a process in a workflow system: a case study in a city hall

Organizations are Complex systems. A conceptual model of the enterprise is needed that is: coherent the distinguished aspect models constitute a logical and truly integral comprehensive all relevant issues are covered consistent the aspect models are free from contradictions or irregularities concise no superfluous matters are contained in it essential it shows only the essence of the enterprise, i.e., the model abstracts from all realization and implementation issues. The world is in great need for transparency about the operation of all the systems we daily work with, ranging from the domestic appliances to the big societal institutions. In this context the field of enterprise ontology has emerged with the aim to create models that help to understand the essence of the construction and operation of complete systems; more specifically, of enterprises. Enterprise ontology arises in the way to look through the distracting and confusing appearance of an enterprise right into its deep kernel. This, from the perspective of the system designer gives him the tools needed to design a successful system in a way that’s reflects the desires and needs of the workers of the enterprise. This project’s context is the use of DEMO (Design and Engineering Methodology for Organizations) for (re)designing or (re)engineering of an enterprise, namely a process of the construction department of a city hall, the lack of a well-founded theory about the construction and operation of this processes that was the motivation behind this work. The purpose of studying applying the DEMO theory and method was to optimize the process, automating it as much as possible, while reducing paper and time spent between tasks and provide a better service to the citizens.

Beam Search Algorithms for Minimizing Tool Switches on a Flexible Manufacturing System

In the minimization of tool switches problem we seek a sequence to process a set of jobs so that the number of tool switches required is minimized. In this work different variations of a heuristic based on partial ordered job sequences are implemented and evaluated. All variations adopt a depth first strategy of the enumeration tree. The computational test results indicate that good results can be obtained by a variation which keeps the best three branches at each node of the enumeration tree, and randomly choose, among all active nodes, the next node to branch when backtracking.

CHARGED PARTICLE DYNAMICS IN TIME DEPENDENT MAGNETIC FIELDS

In this work we study the behavior of charged particles immersed in a peculiar configuration of magnetic fields, which has a main constant field B(0) and a superimposed, transversal perturbation field B(1) sin(omega(p)t), with B(1) << B(0). By taking Cartesian coordinates and placing B(0) along the z axis and B(1) sin (omega(p)t) on the x axis, an analytical solution for y(t) may be obtained by solving an integrodifferential equation. Besides, the solution z(t) also exhibits a very interesting dynamics, and the entire system is conditioned by resonances between the particle orbit frequencies and the frequency of the magnetic transversal perturbation, omega(p). In this work we also discuss numerical simulations for the related particle trajectories, as well as potential applications in the context of separation phenomena.

Production and evaluation of lettuce seedlings and plants in hydroponic floating system

The investigation was conducted under greenhouse conditions at UNESP, Brazil, to evaluate the effects of the commercial substrates Plantmax and Sunshine and its mixtures with charred rice hulls, and the effects of floating and conventional seedling production systems in lettuce cultivation. The experiment was a randomized block experimental design, in 4 x 4 factorial treatment arrangement with two replications. Seedlings produced in the floating system were more precocious in relation to the conventional system. From transplant to harvest, the seedling production systems had similar mean time of production.