Techniques for detailed heat transfer measurements in cold supersonic blowdown tunnels using thermochromic liquid crystals

The paper presents methods for measurement of convective heat transfer distributions in a cold flow, supersonic blowdown wind tunnel. The techniques involve use of the difference between model surface temperature and adiabatic wall temperature as the driving temperature difference for heat transfer and no active heating or cooling of the test gas or model is required. Thermochromic liquid crystals are used for surface temperature indication and results presented from experiments in a Mach 3 flow indicate that measurements of the surface heat transfer distribution under swept shock wave boundary layer interactions can be made. (C) 2002 Elsevier Science Ltd. All rights reserved.

Assessing the self-heating behaviour of Callide coal using a 2-metre column

A 2-m, adiabatic column has been successfully refurbished and recommissioned for coal self-heating research at The University of Queensland. Subbituminous coal from the Callide Coalfields reached thermal runaway in just under 19 days from a starting temperature of 20-22 degreesC. The coal was loaded as two layers, with an R-70 index of 2.73 degreesC h(-1) and 5.90 degreesC h(-1) for the upper layer and lower layer respectively. Initially, a hotspot developed in the upper layer between 120 and 140 cm from the air inlet due to moisture adsorption. After 7 days, self-heating in the lower half of the column began to take over, consistent with the higher R-70 index of this coal. The location of the final hotspot was approximately 60 cm from the air inlet. Further tests on Australian coals, with the column, will enable a better understanding of coal self-heating under conditions closely resembling mining, transport and storage of coal. The results from the column will also provide industry with the information needed to manage the coal self-heating hazard. (C) 2002 Elsevier Science Ltd. All rights reserved.

Ultra-high-temperature (UHT) treatment of milk: comparison of direct and indirect modes of heating

UHT processing of milk and its subsequent storage causes several changes which affect the shelf-life of UHT milk although it remains 'commercially sterile'. These changes include whey protein denaturation, protein-protein interaction, lactose-protein interaction, isomerisation of lactose, Maillard browning, sulphydryl compound formation, formation of a range of carbonyl and other flavoursome compounds, and formation of insoluble substances. They ultimately reduce the quality and limit the shelf life of UHT milk through development of off-flavours, fat separation, age gelation and sedimentation. The extent of these changes depends on many factors, a major one being the type of UHT heating. This review compares the effect heating milk by direct and indirect modes on various aspects of processing and quality of UHT milk.

Behavior of argon gas release from manganese oxide minerals as revealed by Ar-40/Ar-39 laser incremental heating analysis

Manganese oxides in association with paleo-weathering may provide significant insights into the multiple factors affecting the formation and evolution of weathering profiles, such as temperature, precipitation, and biodiversity. Laser probe step-heating analysis of supergene hollandite and cryptomelane samples collected from central Queensland, Australia, yield well-defined plateaus and consistent isochron ages, confirming the feasibility, dating very-fined supergene manganese oxides by Ar-40/(39) Ar technique. Two distinct structural sites hosting Ar isotopes can be identified in light of their degassing behaviors obtained by incremental heating analyses. The first site, releasing its gas fraction at the laser power 0.2-0.4 W, yields primarily Ar-40(atm), Ar-38(atm), and Ar-36(atm), (atmospheric Ar isotopes). The second sites yield predominantly Ar-40* (radiogenic Ar-40), Ar-39(K), and Ar-38(K) (nucleogenic components), at similar to0.5-1.0 W. There is no significant Ar gas released at the laser power higher than 1.0 W, indicating the breakdown of the tunnel sites hosting the radiogenic and nucleogenic components. The excellent match between the degassing behaviors of Ar-40*, Ar-39(K), and Ar-38(K) suggests that these isotopes occupy the same crystallographic sites and that Ar-39(K) loss from the tunnel site by recoil during neutron irradiation and/or bake-out procedure preceding isotopic analysis does not occur. Present investigation supports that neither the overwhelming atmospheric Ar-40 nor the very-fined nature of the supergene manganese oxides poses problems in extracting meaningful weathering geo-chronological information by analyzing supergene manganese oxides minerals.

Repetitive brief ischemia: Intermittent reperfusion during ischemia ameliorates the extent of injury in the perfused kidney

Acute renal failure commonly follows reduced renal perfusion or ischemia. Reperfusion is essential for recovery but can itself cause functional and structural injury to the kidney. The separate contributions of ischemia and of reperfusion were examined in the isolated perfused rat kidney. Three groups were studied: brief (5 min) ischemia, 20 min ischemia, and repetitive brief ischemia (4 periods of 5 min) with repetitive intervening reperfusion of 5 min. A control group had no intervention, the three ischemia groups were given a baseline perfusion of 30 min before intervention and all groups were perfused for a total of 80 min. In addition, the effects of exogenous (NO)-N-. from sodium nitroprusside and xanthine oxidase inhibition by allopurinol were assessed in the repetitive brief ischemia-reperfusion model. Brief ischemia produced minimal morphological injury with near normal functional recovery. Repetitive brief ischemia reperfusion caused less functional and morphological injury than an equivalent single period of ischemia (20 min) suggesting that intermittent reperfusion is less injurious than ischemia alone over the time course of study. Pretreatment with allopurinol improved renal function after repetitive brief ischemia-reperfusion compared with the allopurinol-untreated repetitive brief ischemia-reperfusion group. Similarly, sodium nitroprusside reduced renal vascular resistance but did not improve the glomerular filtration rate or sodium reabsorption in the repetitive brief ischemia-reperfusion model. Thus, these studies show that the duration of uninterrupted ischemia is more critical than reperfusion in determining the extent of renal ischemia-reperfusion injury and that allopurinol, in particular, counteracts the oxidative stress of reperfusion.

Kinetic parameters associated with self-heating of New Zealand coals under adiabatic conditions

Adiabatic self-heating tests were carried out on five New Zealand coal samples ranging in rank from lignite to high-volatile bituminous. Kinetic parameters of oxidation were obtained front the self-heating curves assuming Arrhenius behaviour. The activation energy E (kJ mol(-1)) and the pre-exponential factor A (s(-1)) were determined in the temperature range of 70-140 degreesC. The activation energy exhibited a definite rank relationship with a minimum E of 55 kJ mol(-1) occurring at a Suggate rank of similar to6.2 corresponding to subbituminous C. Either side of this rank there was a noticeable increase in the activation energy indicating lower reactivity of the coal. A similar rank trend was also observed in the R-70 self-heating rate index values that were taken from the initial portion of the self-heating curve front 40 to 70 degreesC. From these results it is clear that the adiabatic method is capable of providing reliable kinetic parameters of coal oxidation.

Alterations in pulmonary vascular function in rats exposed to intermittent hypoxia

Vasoactive agents were examined in arteries from control rats and rats exposed to intermittent hypoxia (10% oxygen; 8 h/day) for 3, 5 or 20 days. Hypoxic rats developed right ventricular hypertrophy after 5 days, but became pulmonary hypertensive (elevated right ventricular systolic pressure; RVSP) only after 20 days. In pulmonary arteries (main and intralobar), responses to acetylcholine and ionomycin (endothelium-dependent vasodilators) were reduced after 20 and 5 days of intermittent hypoxia, whereas contractions to 5-hydroxytryptamine (5-HT) were enhanced (potency increase >10-fold) after 20, 5 and 3 days. Contractions to endothelin-1 and a thromboxane-mimetic, but not Ca-2divided by, were also increased. No changes in vascular function occurred in aorta. Since changes in pulmonary vascular function preceded the increase in RVSP they do not result from, but may contribute to, the development of hypoxia-induced pulmonary hypertension. If similar changes occur in humans, they may be important in conditions characterised by intermittent, as opposed to continuous, hypoxia. (C) 2003 Elsevier B.V. All rights reserved.

Surface stickiness of drops of carbohydrate and organic acid solutions during convective drying: Experiments and modeling

Drying kinetics of low molecular weight sugars such as fructose, glucose, sucrose and organic acid such as citric acid and high molecular weight carbohydrate such as maltodextrin (DE 6) were determined experimentally using single drop drying experiments as well as predicted numerically by solving the mass and heat transfer equations. The predicted moisture and temperature histories agreed with the experimental ones within 6% average relative (absolute) error and average difference of +/- 1degreesC, respectively. The stickiness histories of these drops were determined experimentally and predicted numerically based on the glass transition temperature (T-g) of surface layer. The model predicted the experimental observations with good accuracy. A nonsticky regime for these materials during spray drying is proposed by simulating a drop, initially 120 mum in diameter, in a spray drying environment.

Potássio : fontes alternativas, tratamentos térmicos e disponibilidade para plantas de milho (Zea Mays L.)

Nosso país é um dos principais produtores agrícolas do mundo e altamente dependente da importação de fertilizantes, principalmente o potássio. Visando reduzir essa dependência, materiais provenientes de rochas para fornecimento desse elemento estão sendo testados. Este estudo foi divido em dois experimentos: um experimento em laboratório e um em casa de vegetação. O experimento em laboratório teve por objetivo avaliar os diferentes tipos de tratamentos térmicos e extratores, associados a fontes alternativas de potássio, no aumento da disponibilidade de K. O ensaio foi realizado num delineamento experimental inteiramente casualizado num esquema fatorial 4 x 5 x 3, com quatro repetições. Os fatores estudados foram: quatro fontes alternativas de potássio (verdete, fonolito, gnaisse e granito); cinco tratamentos térmicos (radiação em forno micro-ondas; autoclavagem; aquecimento em forno mufla com resfriamento rápido; aquecimento em forno mufla com resfriamento lento; e o material in natura); e três extratores: água, ácido cítrico 2 % e solução Mehlich-1. As extrações foram realizadas utilizando 4 g das fontes alternativas, adicionando-se 40 mL de cada extrator, as amostras foram agitadas, centrifugadas, filtradas e avolumadas. Foram realizadas seis extrações sucessivas e determinada a concentração de potássio nos extratos. Os dados obtidos foram submetidos à análise de variância, sendo seus efeitos desdobrados em contrastes ortogonais. O experimento em casa de vegetação teve por objetivo avaliar o efeito da utilização de fontes alternativas de potássio, submetidas a tratamentos térmicos, no fornecimento de potássio para plantas de milho (Zea mays L.). O delineamento experimental adotado foi em blocos casualizados, em um esquema fatorial (3 x 5) + 1, sendo três fontes alternativas de K (verdete, fonolito e granito), submetidas à cinco diferentes tratamentos (aquecimento em forno mufla com resfriamento lento, aquecimento em forno mufla com resfriamento rápido, radiação em forno micro-ondas, autoclavagem, e o material in natura). As fontes alternativas foram comparadas com o cloreto KCl. Amostras de solo contendo 2 dm³ de TFSA, foram incubadas durante 20 dias. Após a adubação, em cada vaso foram aplicadas as fontes alternativas de potássio. Realizou-se o plantio com cinco sementes de milho e posterior desbaste, deixando três plantas por vaso. Decorridos 40 dias da semeadura, foi realizado o corte da parte aérea das plantas, a coleta de amostras de solo para análise dos teores de potássio e separação das raízes. Os dados obtidos foram submetidos à análise de variância e desdobrados em contrastes ortogonais. Observando os resultados obtidos nos experimentos de laboratório e casa de vegetação, podemos concluir que a fonte alternativa e proporcionou melhores resultados e que possui potencial agronômico para ser utilizada como fonte alternativa de potássio foi o fonolito. Utilizando o fonolito como fonte alternativa de nutrientes, o tratamento térmico que proporcionou melhores resultados foi o com aquecimento em forno mufla, principalmente quando o resfriamento foi realizado lentamente.

Intermittent claudication and physical exercise: effectiveness of a home-based program

Peripheral arterial disease (PAD) as a high incidence in general population and 12% to 20% of population with more than 60 years has already clinical symptoms, such as intermittent claudication (IC), pain, loss of strength and functional incapacity. There are already some studies who refer the possible positive effects of physical exercise in functional consequences of PAD.

Intermittent claudication and physical exercise: effectiveness of a home-based program

Peripheral arterial disease (PAD) as a high incidence in general population and 12% to 20% of population with more than 60 years has already clinical symptoms, such as intermittent claudication (IC), pain, loss of strength and functional incapacity. There are already some studies that refer the possible positive effects of physical exercise in functional consequences of PAD. The purpose of this study was to verify the results of a home-based (HB) weekly supervised physical exercise program in patients with IC in consequence of PAD in lower limbs, and observe the medium number of diary steps walked by the subjects of our study.

Study of the one dimensional and transient bioheat transfer equation: Multi-layer solution development and applications

: In this work we derive an analytical solution given by Bessel series to the transient and one-dimensional (1D) bioheat transfer equation in a multi-layer region with spatially dependent heat sources. Each region represents an independent biological tissue characterized by temperature-invariant physiological parameters and a linearly temperature dependent metabolic heat generation. Moreover, 1D Cartesian, cylindrical or spherical coordinates are used to define the geometry and temperature boundary conditions of first, second and third kinds are assumed at the inner and outer surfaces. We present two examples of clinical applications for the developed solution. In the first one, we investigate two different heat source terms to simulate the heating in a tumor and its surrounding tissue, induced during a magnetic fluid hyperthermia technique used for cancer treatment. To obtain an accurate analytical solution, we determine the error associated with the truncated Bessel series that defines the transient solution. In the second application, we explore the potential of this model to study the effect of different environmental conditions in a multi-layered human head model (brain, bone and scalp). The convective heat transfer effect of a large blood vessel located inside the brain is also investigated. The results are further compared with a numerical solution obtained by the Finite Element Method and computed with COMSOL Multi-physics v4.1 (c). (c) 2013 Elsevier Ltd. All rights reserved.

A novel application of microwave-assisted extraction of polyphenols from brewer’s spent grain with HPLC-DAD-MS analysis

This paper reports a novel application of microwave-assisted extraction (MAE) of polyphenols from brewer’s spent grains (BSG). A 24 orthogonal composite design was used to obtain the optimal conditions of MAE. The influence of the MAE operational parameters (extraction time, temperature, solvent volume and stirring speed) on the extraction yield of ferulic acid was investigated through response surface methodology. The results showed that the optimal conditions were 15 min extraction time, 100 °C extraction temperature, 20 mL of solvent, and maximum stirring speed. Under these conditions, the yield of ferulic acid was 1.31±0.04% (w/w), which was fivefold higher than that obtained with conventional solid–liquid extraction techniques. The developed new extraction method considerably reduces extraction time, energy and solvent consumption, while generating fewer wastes. HPLC-DADMS analysis indicated that other hydroxycinnamic acids and several ferulic acid dehydrodimers, as well as one dehydrotrimer were also present, confirming that BSG is a valuable source of antioxidant compounds.

Analysis of polycyclic aromatic hydrocarbons in fish: optimisation and validation of microwave-assisted extraction

An accurate and sensitive method for determination of 18 polycyclic aromatic hydrocarbons (PAHs) (16 PAHs considered by USEPA as priority pollutants, dibenzo[a,l]pyrene and benzo[j]fluoranthene) in fish samples was validated. Analysis was performed by microwave-assisted extraction and liquid chromatography with photodiode array and fluorescence detection. Response surface methodology was used to find the optimal extraction parameters. Validation of the overall methodology was performed by spiking assays at four levels and using SRM 2977. Quantification limits ranging from 0.15–27.16 ng/g wet weight were obtained. The established method was applied in edible tissues of three commonly consumed and commercially valuable fish species (sardine, chub mackerel and horse mackerel) originated from Atlantic Ocean. Variable levels of naphthalene (1.03–2.95 ng/g wet weight), fluorene (0.34–1.09 ng/g wet weight) and phenanthrene (0.34–3.54 ng/g wet weight) were detected in the analysed samples. None of the samples contained detectable amounts of benzo[a]pyrene, the marker used for evaluating the occurrence and carcinogenic effects of PAHs in food.

Convective patterns under the Indo-Atlantic << box >>

Using fluid mechanics, we reinterpret the mantle images obtained from global and regional tomography together with geochemical, geological and paleomagnetic observations, and attempt to unravel the pattern of convection in the Indo-Atlantic "box" and its temporal evolution over the last 260 Myr. The << box >> presently contains a) a broad slow seismic anomaly at the CMB which has a shape similar to Pangea 250 Myr ago, and which divides into several branches higher in the lower mantle, b) a "superswell, centered on the western edge of South Africa, c) at least 6 "primary hotspots" with long tracks related to traps, and d) numerous smaller hotspots. In the last 260 Myr, this mantle box has undergone 10 trap events, 7 of them related to continental breakup. Several of these past events are spatially correlated with present-day seismic anomalies and/or upwellings. Laboratory experiments show that superswells, long-lived hotspot tracks and traps may represent three evolutionary stages of the same phenomenon, i.e. episodic destabilization of a hot, chemically heterogeneous thermal boundary layer, close to the bottom of the mantle. When scaled to the Earth's mantle, its recurrence time is on the order of 100-200 Myr. At any given time, the Indo-Atlantic box should contain 3 to 9 of these instabilities at different stages of their development, in agreement with observations. The return flow of the downwelling slabs, although confined to two main << boxes >> (Indo-Atlantic and Pacific) by subduction zone geometry, may therefore not be passive, but rather take the form of active thermochemical instabilities. (c) 2005 Elsevier B.V. All rights reserved.