Columnar joints in the Patino Formation sandstones, Eastern Paraguay: a dynamic interaction between dyke intrusion, quartz dissolution and cooling-induced fractures

The Patino Formation sandstones, which crop out in Aregua neighborhood in Eastern Paraguay and show columnar joints near the contact zone with a nephelinite dyke, have as their main characteristics the high proportion of syntaxial quartz overgrowth and a porosity originated from different processes, initially by dissolution and later by partial filling and fracturing. Features like the presence of floating grains in the syntaxial cement, the transitional interpenetrative contact between the silica-rich cement and grains as well as the intense fracture porosity are strong indications that the cement has been formed by dissolution and reprecipitation of quartz from the framework under the effect of thermal expansion followed by rapid contraction. The increase of the silica-rich cement towards the dyke in association with the orthogonal disposition of the columns relative to dyke walls are indicative that the igneous body may represent the main heat source for the interstitial aqueous solutions previously existing in the sediments. At macroscopic scale, the increasing of internal tensions in the sandstones is responsible for the nucleation of polygons, leading to the individualization of prisms, which are interconnected by a system of joints, formed firstly on isotherm surfaces of low temperature and later on successive adjacent planes towards the dyke heat source.

Head, tail, rail: imagens periféricas ou o obtuso das imagens fílmicas

Tendo como ponto de partida um conjunto de trailers cinematográficos, provenientes de salas de cinemas em declínio, este trabalho de investigação artística explora uma série de códigos, imagens gráficas e informações industriais, encontradas na periferia dessas bobinas fílmicas, que servem de orientação aos técnicos laboratoriais e aos projeccionistas. Sustentado nos conceitos de esconderijo (Bazin), intervalo (Vertov) e obtuso (Barthes), Head, Tail, Rail procura reflectir sobre o que está para além daquilo que os filmes, normalmente, mostram. Com recurso ao found footage e a várias técnicas de montagem, este trabalho pretende transformar as matérias fílmicas (película, imagem e som) em novas e regeneradas composições audiovisuais, sem qualquer referencial, extraindo daí o obtuso das imagens fílmicas.

Evaluation of Electrical Properties of Lap Joints for BSCCO and YBCO Tapes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effects of several TIG weld repairs on the axial fatigue strength of AISI 4130 aeronautical steel-welded joints

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Fatigue strength of tungsten inert gas-repaired weld joints in airplane critical structures

In this work the effect of Gas Tungsten Arc Welding (GTAW) repairs on the axial fatigue strength of an AISI 4130 steel welded joint used in airframe critical to the flight-safety was investigated. Fatigue tests were performed at room temperature on 0.89 mm thick hot-rolled plates with constant amplitude and load ratio of R = 0.1, at 20 Hz frequency. Monotonic tensile tests, optical metallography and microhardness, residual stress and weld geometric factors measurements were also performed. The fatigue strength decreased with the number of GTAW repairs, and was related to microstructural and microhardness changes, as well as residual stress field and weld profile geometry factors, which gave origin to high stress concentration at the weld toe. (C) 2011 Elsevier B.V. All rights reserved.

Goniometric measurements of the forelimb and hindlimb joints in sheep

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fatigue performance of joints executed in pure titanium structures with several diameters

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Machined and plastic copings in three-element prostheses with different types of implant-abutment joints: a strain gauge comparative analysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

On a control of a non-ideal mono-rail system with periodics coefficients

In this work, the problem in the loads transport (in platforms or suspended by cables) it is considered. The system in subject is composed for mono-rail system and was modeled through the system: inverted pendulum, car and motor and the movement equations were obtained through the Lagrange equations. In the model, was considered the interaction among of the motor and system dynamics for several potencies motor, that is, the case studied is denominated a non-ideal periodic problem. The non-ideal periodic problem dynamics was analyzed, qualitatively, through the comparison of the stability diagrams, numerically obtained, for several motor torque constants. Furthermore, one was made it analyzes quantitative of the problem through the analysis of the Floquet multipliers. Finally, the non-ideal problem was controlled. The method that was used for analysis and control of non-ideal periodic systems is based on the Chebyshev polynomial expansion, in the Picard iterative method and in the Lyapunov-Floquet transformation (L-F trans formation). This method was presented recently in [3-9].

SAE 1045 steel/WC-Co/Ni-Cu-Ni/SAE 1045 steel joints prepared by dynamic diffusion bonding: Microelectrochemical studies in 0.6 M NaCl solution

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Concessions and road and rail transport optimization

Includes bibliography

Port-rail integration: challenges and opportunities for Latin America

This issue of FAL Bulletin analyses the role of good modal integration between port facilities and the rail network to ensure port competitiveness.

Competition and complementarity between road and rail transport in the carriage of freight

A seminar on competition and complementarity between road and rail transport in the carriage of freight was conducted at ECLAC Headquarters on 6-7 November 2001. The seminar was attended by experts on transport matters from a range of countries, and their presentations covered the current state of integration of transport in countries like Argentina, Brazil, Chile and Mexico. Also in attendance was an expert from Central America, who spoke about modal integration of freight transport in that region. Three round-table discussions were held with the participation of representatives of the trucking and rail sectors, drawn from both the private and public spheres.

Rail, urban transport and road maintenance: current trends and prospects

This edition of the FAL Bulletin provides an account of recent developments and trends in rail and urban transport and road maintenance in Latin America and the Caribbean.