New graduate occupational therapists' perceptions of near-misses and mistakes in the workplace

Purpose - The purpose of this paper is to explore the perceptions of near-misses and mistakes among new graduate occupational therapists from Australia and Aotearoa/New Zealand (NZ), and their knowledge of current incident reporting systems. Design/methodology/approach - New graduate occupational therapists in Australia and Aotearoa/NZ in their first year of practice (n=228) participated in an online electronic survey that examined five areas of work preparedness. Near-misses and mistakes was one focus area. Findings - The occurrence and disclosure of practice errors among new graduate occupational therapists are similar between Australian and Aotearoa/NZ participants. Rural location, structured supervision and registration status significantly influenced the perceptions and reporting of practice errors. Structured supervision significantly impacted on reporting procedure knowledge. Current registration status was strongly correlated with perceptions that the workplace encouraged event reporting. Research limitations/ implications - Areas for further investigation include investigating the perceptions and knowledge of practice errors within a broader profession and the need to explore definitional aspects and contextual factors of adverse events that occur in allied health settings. Selection bias may be a factor in this study. Practical implications - Findings have implications for university and workplace structures, such as clinical management, supervision, training about practice errors and reporting mechanisms in allied health. Originality/value - Findings may enable the development of better strategies for detecting, managing and preventing practice errors in the allied health professions.

Factor Five : Transforming the Global Economy through 80% Improvements in Resource Productivity

The 21st century will see monumental change. Either the human race will use its knowledge and skills and change the way it interacts with the environment, or the environment will change the way it interacts with its inhabitants. In the first case, the focus of this book, we would see our sophisticated understanding in areas such as physics, chemistry, engineering, biology, planning, commerce, business and governance accumulated over the last 1,000 years brought to bear on the challenge of dramatically reducing our pressure on the environment. The second case however is the opposite scenario, involving the decline of the planet’s ecosystems until they reach thresholds where recovery is not possible, and following which we have no idea what happens. For instance, if we fail to respond to Sir Nicolas Stern’s call to meet appropriate stabilisation trajectories for greenhouse gas emissions, and we allow the average temperature of our planets surface to increase by 4-6 degrees Celsius, we will see staggering changes to our environment, including rapidly rising sea level, withering crops, diminishing water reserves, drought, cyclones, floods… allowing this to happen will be the failure of our species, and those that survive will have a deadly legacy. In this update to the 1997 International Best Seller, Factor Four, Ernst von Weizsäcker again leads a team to present a compelling case for sector wide advances that can deliver significant resource productivity improvements over the coming century. The purpose of this book is to inspire hope and to then inform meaningful action in the coming decades to respond to the greatest challenge our species has ever faced – that of living in harmony with our planet and its other inhabitants.

Biophilic urbanism : harnessing natural elements to enhance the performance of constructed assets

Creating climate resilient, low-carbon urban environments and assets is a policy goal of many governments and city planners today, and an important issue for constructed asset owners. Stakeholders and decision makers in urban environments are also responding to growing evidence that cities need to increase their densities to reduce their footprint in the face of growing urban populations. Meanwhile, research is highlighting the importance of balancing such density with urban nature, to provide a range of health and wellbeing benefits to residents as well as to mitigate the environmental and economic impacts of heavily built up, impervious urban areas. Concurrently achieving this suite of objectives requires the coordination and cooperation of multiple stakeholder groups, with urban development and investment increasingly involving many private and public actors. Strategies are needed that can provide ‘win-win’ outcomes to benefit these multiple stakeholders, and provide immediate benefits while also addressing the emerging challenges of climate change, resource shortages and urban population growth. Within this context, ‘biophilic urbanism’ is emerging as an important design principle for buildings and urban areas. Through the use of a suite of natural design elements, biophilic urbanism has the potential to address multiple pressures related to climate change, increasing urban populations, finite resources and human’s inherent need for contact with nature. The principle directs the creation of urban environments that are conducive to life, delivering a range of benefits to stakeholders including building owners, occupiers and the surrounding community. This paper introduces the principle of biophilic urbanism and discusses opportunities for improved building occupant experience and performance of constructed assets, as well as addressing other sustainability objectives including climate change mitigation and adaptation. The paper presents an emerging process for considering biophilic design opportunities at different scales and highlights implications for the built environment industry. This process draws on findings of a study of leading cities internationally and learnings related to economic and policy considerations. This included literature review, two stakeholder workshops, and extensive industry consultation, funded by the Sustainable Built Environment National Research Centre through core project partners Western Australian Department of Finance, Parsons Brinckerhoff, Townsville City Council CitySolar Program, Green Roofs Australasia, and PlantUp.

Engineering education for sustainable development : a review of international progress

Since the late 1980s there have been increasing calls around the world for embedding sustainability content throughout engineering curricula, particularly over the past decade. However in general there has been little by way of strategic or systematic integration within programs offered by higher education institutions(HEIs). Responding to a growing awareness towards the issues surrounding sustainability, a number of professional engineering institutions (PEIs) internationally have placed increasing emphasis on policies and initiatives relating to the role of engineering in addressing 21st Century challenges. This has resulted in some consideration towards integrating sustainable development into engineering curricula as envisaged by accreditation guidelines. This paper provides a global overview of such accreditation developments, highlighting emerging sustainability competencies (or ‘graduate attributes’) and places these in the context of relevant PEI declarations, initiatives, policies, codes of ethics and guideline publications. The paper concludes by calling for urgent action by PEIs, including strategic accreditation initiatives that promote timely curriculum renewal towards EESD.

Airports of the future : improving operation, security and experience

The final report for the ARC project "Airports of the Future". It contains the findings and recommendations provided by the various teams to the industry partners.

Decoupling 2 : technologies, opportunities and policy options

This report was produced by the Decoupling Working Group of the International Resource Panel. It explores technological possibilities and opportunities for both developing and developed countries to accelerate decoupling and reap the environmental and economic benefits of increased resource productivity. It also examines several policy options that have proved to be successful in helping different countries to improve resource productivity in various sectors of their economy, avoiding negative impacts on the environment. It does not seem possible for a global economy based on the current unsustainable patterns of resource use to continue into the future. The economic consequences of these patterns are already apparent in three areas: increases in resource prices, increased price volatility and disruption of environmental systems. The environment impacts of resource use are also leading to potentially irreversible changes to the world’s ecosystems, often with direct effects on people and the economy – for example through damage to health, water shortages, loss of fish stocks or increased storm damage. But there are alternatives to these scary patterns. Many decoupling technologies and techniques that deliver resource productivity increases as high as 5 to 10-fold are already available, allowing countries to pursue their development strategies while significantly reducing their resource footprint and negative impacts on the environment. This report shows that much of the policy design “know-how” needed to achieve decoupling is present in terms of legislation, incentive systems, and institutional reform. Many countries have tried these out with tangible results, encouraging others to study and where appropriate replicate and scale up such practices and successes.

Systematic integration of human factors in the specification of requirements for new railway technologies

Engineering design processes are necessary to attain the requisite standards of integrity for high-assurance safety-related systems. Additionally, human factors design initiatives can provide critical insights that parameterise their development. Unfortunately, the popular perception of human factors as a “forced marriage” between engineering and psychology often provokes views where the ‘human factor’ is perceived as a threat to systems design. Some popular performance-based standards for developing safety-related systems advocate identifying and managing human factors throughout the system lifecycle. However, they also have a tendency to fall short in their guidance on the application of human factors methods and tools, let alone how the outputs generated can be integrated in to various stages of the design process. This case study describes a project that converged engineering with human factors to develop a safety argument for new low-cost railway level crossing technology for system-wide implementation in Australia. The paper enjoins the perspectives of a software engineer and cognitive psychologist and their involvement in the project over two years of collaborative work to develop a safety argument for low-cost level crossing technology. Safety and reliability requirements were informed by applying human factors analytical tools that supported the evaluation and quantification of human reliability where users interfaced with the technology. The project team was confronted with significant challenges in cross-disciplinary engagement, particularly with the complexities of dealing with incongruences in disciplinary language. They were also encouraged to think ‘outside the box’ as to how users of a system interpreted system states and ehaviour. Importantly, some of these states, while considered safe within the boundary of the constituent systems that implemented safety-related functions, could actually lead the users to engage in deviant behaviour. Psychology explained how user compliance could be eroded to levels that effectively undermined levels of risk reduction afforded by systems. Linking the engineering and psychology disciplines intuitively, overall safety performance was improved by introducing technical requirements and making design decisions that minimized the system states and behaviours that led to user deviancy. As a commentary on the utility of transdisciplinary collaboration for technical specification, the processes used to bridge the two disciplines are conceptualised in a graphical model.

Advances in gyro-stabilisation of vessel roll motion

The use of gyro-dynamic forces to counteract the wave-induced roll motion of marine vessels in a seaway was proposed over 100 years ago. These early systems showed a remarkable performance, reporting roll reductions of up to 95% in some sailing conditions. Despite this success, further developments were not pursued since the systems were unable to provide acceptable performance over an extended envelope of sailing and environmental conditions, and the invention of fin roll stabilisers provided a satisfactory alternative. This has been attributed to simplistic controls, heavy drive systems, and large structural mass required to withstand the loads given the low strength materials available at the time. Today, advances in material strength, bearings, motor technology and mechanical design methods, together with powerful signal processing algorithms, has resulted in a revitalized interest in gyro-stabilisers for ships. Advanced control systems have enabled optimisation of restoring torques across a range of wave environments and sailing conditions through adaptive control system design. All of these improvements have resulted in increased spinning speed, lower mass, and dramatically increased stabilising performance. This brief paper provides an overview of recent developments in the design and control of gyro-stabilisers of ship roll motion. In particular, the novel Halcyon Gyro-Stabilisers are introduced, and their performance is illustrated based on a simulation case study for a naval patrol vessel. Given the growing national and global interest in small combatants and patrol vessels, modem gyro-stabilisers may offer a significant technological contribution to the age old problem of comfort and mission operability on small ships, especially at loiter speeds.

Innovate triple constraints model for better construction projects results

The continuous changing impacts appeared in all solution understanding approaches in the projects management field (especially in the construction field of work) by adopting dynamic solution paths. The paper will define what argue to be a better relational model for project management constraints (time, cost, and scope). This new model will increase the success factors of any complex program / project. This is a qualitative research adopting a new avenue of investigation by following different approach of attributing project activities with social phenomena, and supporting phenomenon with field of observations rather than mathematical method by emerging solution from human, and ants' colonies successful practices. The results will show the correct approach of relation between the triple constraints considering the relation as multi agents system having specified communication channels based on agents locations. Information will be transferred between agents, and action would be taken based on constraint agents locations in the project structure allowing immediate changes abilities in order to overcome issues of over budget, behind schedule, and additional scope impact. This is complex adaptive system having self organizes technique, and cybernetic control. Resulted model can be used for improving existing project management methodologies.

Mini-Orb : A personal indoor climate preference feedback interface

The control of environmental factors in open-office environments, such as lighting and temperature is becoming increasingly automated. This development means that office inhabitants are losing the ability to manually adjust environmental conditions according to their needs. In this paper we describe the design, use and evaluation of MiniOrb, a system that employs ambient and tangible interaction mechanisms to allow inhabitants of office environments to maintain awareness of environmental factors, report on their own subjectively perceived office comfort levels and see how these compare to group average preferences. The system is complemented by a mobile application, which enables users to see and set the same sensor values and preferences, but using a screen-based interface. We give an account of the system’s design and outline the results of an in-situ trial and user study. Our results show that devices that combine ambient and tangible interaction approaches are well suited to the task of recording indoor climate preferences and afford a rich set of possible interactions that can complement those enabled by more conventional screen-based interfaces.

Biophilic urbanism: Contributions to holistic urban greening for urban renewal

Purpose – The purpose of this paper is to consider how biophilic urbanism complements and potentially enhances approaches for the built environment profession to holistically integrate nature into cities. Urban nature – also referred to as urban greening and green infrastructure – has increasingly been considered from many perspectives to address challenges such as population pressures, climate change and resource shortages. Within this context, the authors highlight how “biophilic urbanism” complements and may enhance approaches and efforts for urban greening. Design/methodology/approach – The paper provides a review of existing literature in “urban nature” to clarify and discuss the concept of biophilic urbanism. Drawing on this literature review, the authors present a systematic clustering and scaling of “biophilic elements” that could facilitate responding to twenty-first century challenges. Findings – Biophilic urbanism can be applied at multiple scales in urban environments, through a range of multi-functional features that address the pervasive false dichotomy of urban development and environmental protection. Biophilic urbanism can complement urban greening efforts to enable a holistic approach, which is conducive to comprehensive, intentional and strategic urban greening. Originality/value – This paper situates the emerging concept of biophilic urbanism within existing research from multiple disciplines, providing insight for how this can be applied in practice, particularly to the topical challenge of “urban renewal”.

Effect Of Directionality Of Grinding Marks On Friction And Formation Of Transfer Layer

Surface texture influences friction and transfer layer formation during sliding. In the present investigation, basic studies were conducted using inclined pin-on-plate sliding tester to understand the effect of directionality of surface grinding marks of hard material on friction and transfer layer formation during sliding against soft materials. 080 M40 steel plates were ground to attain different surface roughness with unidirectional grinding marks. Then pins made of soft materials such as pure Al, pure Mg and Al-Mg alloy were slid against the prepared steel plates. Grinding angle (i.e., the angle between direction of sliding and grinding marks) was varied between 0 degrees and 90 degrees in the tests. Experiments were conducted under both dry and lubricated conditions on each plate in ambient environment. It was observed that the transfer layer formation and the coefficient of friction, which has two components adhesion and plowing - depend primarily on the directionality of grinding marks of the harder mating surface, and independent of surface roughness of the harder mating surface. For the case of pure Mg, stick-slip phenomenon was observed under dry condition for all grinding angles and it was absent upto 20 degrees grinding angles under lubricated condition. However, for the case of Al, it was observed only under lubricated conditions for angles exceeding 20 degrees. As regards the alloy, namely, Al-Mg alloy, it, was absent in both conditions. For the case of pure Mg and Al, it was observed that the amplitude of stick-slip motion primarily depends on plowing component of friction. The grinding angle effect on coefficient of friction was attributed to the variation of plowing component of friction with grinding angle.

Correlating The Features Of Topography To Friction By Sliding Experiments

Friction can influence the quality of the finished product to a large extent in certain manufacturing processes. Sheet metal forming is a particular case, where the friction between the hard-die and the relatively soft work-piece can be extremely important. Under such conditions, topography of the harder surface can influence the resistance to traction at the interface. This paper discusses about the correlation between certain features of the surface; topography and coefficient of friction based on experiments involving sliding of a few soft metal pins against a harder material. A brief description of the experimental procedure and the analysis are presented. A hybrid parameter which encapsulates both the amplitude features as well as the relative packing of peaks is shown to correlate well with the coefficient of friction.

Fatigue Laws Via Functional Equations

In routine industrial design, fatigue life estimation is largely based on S-N curves and ad hoc cycle counting algorithms used with Miner's rule for predicting life under complex loading. However, there are well known deficiencies of the conventional approach. Of the many cumulative damage rules that have been proposed, Manson's Double Linear Damage Rule (DLDR) has been the most successful. Here we follow up, through comparisons with experimental data from many sources, on a new approach to empirical fatigue life estimation (A Constructive Empirical Theory for Metal Fatigue Under Block Cyclic Loading', Proceedings of the Royal Society A, in press). The basic modeling approach is first described: it depends on enforcing mathematical consistency between predictions of simple empirical models that include indeterminate functional forms, and published fatigue data from handbooks. This consistency is enforced through setting up and (with luck) solving a functional equation with three independent variables and six unknown functions. The model, after eliminating or identifying various parameters, retains three fitted parameters; for the experimental data available, one of these may be set to zero. On comparison against data from several different sources, with two fitted parameters, we find that our model works about as well as the DLDR and much better than Miner's rule. We finally discuss some ways in which the model might be used, beyond the scope of the DLDR.

Axially Loaded Timoshenko Rotors From A Prestressed Continuum Approach

We consider an axially loaded Timoshenko rotor rotating at a constant speed and derive its governing equations from a continuum viewpoint. The primary aim of this paper is to understand the source and role of gyroscopic terms, when the rotor is viewed not as a Timoshenko beam but as a genuine 3D continuum. We offer the primary insight that macroscopically observed gyroscopic terms may also, quite equivalently, be viewed as external manifestations of internally existing spin-induced prestresses at the continuum level. To demonstrate this idea with an analytical example (the Timoshenko rotor), we have studied the reliable equations of Choi et al. (Journal of Vibration and Acoustics, 114, 1992, 249-259). Using a straightforward application of our insight in the framework of nonlinear elasticity, we obtain equations that exactly match Choi et al. for the case with no axial load. For the case of axial preload, our straightforward formulation leads to a slightly different set of equations that have negligible numerical consequence for solid rotors. However, we offer a macroscopic, intuitive, justification for modifying our formulation so as to obtain the exact equations of Choi et al. with the axial load included.