Stratégies pédagogiques et leur effet sur la motivation et l’engagement des étudiants en sciences au collégial

Résumé : Cette recherche descriptive a pour origine une question de praticienne-chercheure : Quels sont les stratégies et les actes pédagogiques à privilégier par un enseignant en sciences au collégial, afin de stimuler la motivation des étudiants à s’engager dans leurs activités d’apprentissage? Les enjeux pédagogiques au niveau collégial sont d’importance. Les études scientifiques sont caractérisées par un grand nombre d’abandons, un faible niveau de motivation et d’engagement des étudiants dans leurs études et un taux de réussite sous les seuils visés. L’enseignant peut jouer un rôle-clef pour stimuler l’engagement des étudiants, tant par ses stratégies pédagogiques ou ses choix d’activité d’apprentissage que par le support qu’il peut apporter à l’apprenant. La particularité du milieu collégial, où se côtoient formation pré-universitaire et formation technique, n’a pas encore été étudiée, dans une perspective comparative sur la dynamique motivationnelle, en lien avec l’engagement dans une formation scientifique. L’objectif général de cette recherche est de décrire les perceptions des étudiants quant à leur motivation, selon différents actes et stratégies pédagogiques mis en place par les enseignants de deux programmes scientifiques au niveau collégial, soit le programme pré-universitaire Sciences de la nature et pour le programme Techniques de laboratoire, profil Biotechnologies. Chacun des 16 enseignants participants de biologie ou de physique des deux programmes ont été observés durant une ou deux séances de cours totalisant 58 heures d’enseignement, pour 29 groupes d’étudiants, de façon à identifier la stratégie pédagogique générale de la séance et les actes pédagogiques qui ont été concrétisés en classe. Les étudiants ont ensuite complété un questionnaire en ligne sur leurs perceptions en lien avec la motivation concernant ces stratégies et actes pédagogiques. Les questionnaires de 272 répondants ont été traité, analysés et interprétés, de façon à dresser un portrait de la dynamique motivationnelle par groupes de comparaison, par analyses statistiques et analyse qualitative des commentaires spontanés des répondants. Les étudiantes et étudiants de Biotechnologies ont des perceptions plus favorables à la motivation en accordant plus de valeur aux activités d’apprentissage que les répondants de Sciences de la nature. Ils ont également un désir d’engagement plus élevé. Les hommes de Biotechnologies se sentent significativement plus compétents que les femmes du même programme et les répondants des deux genres en Sciences de la nature, ils ont une plus grande facilité à participer aux activités d’apprentissage en classe et ne mentionnent que très peu d’émotions négatives en lien avec les activités de leurs séances de cours. Les étudiantes et étudiants des deux programmes ont des perceptions très diversifiées sur les activités d’apprentissage et stratégies pédagogiques; elles sont même opposées entre certains étudiants pour une même séance de cours, ce qui indique que d’offrir une bonne variété d’actes pédagogiques à chaque séance de cours est à privilégier pour stimuler la motivation du plus grand nombre.

Pattern peristaltico uterino nell'adenomiosi isolata: studio prospettico

Obiettivi dello studio: valutare con l’ecografia transvaginale la peristalsi uterina in fase periovulatoria in donne con adenomiosi isolata, confrontandola con un gruppo di controllo e, secondariamente, valutare il grado di accordo tra gli sperimentatori nella descrizione dei pattern di contrattilità. Disegno dello studio: studio osservazione prospettico condotto presso il Policlinico S. Orsola- Malpighi di Bologna, Italia. Materiali e Metodi: sono state reclutate pazienti afferenti al Centro per valutazione ambulatoriale, suddivise sulla base dei criteri di inclusione ed esclusione nei gruppi A (adenomiosi) e B (controlli) e sono state sottoposte da un unico ecografista esperto a ecografia transvaginale con registrazione di un video della durata di 180 secondi della scansione sagittale dell’utero. La registrazione è stata rivalutata off line da due sperimentatori esperti ecografisti, non a conoscenza della storia clinica delle pazienti e in cieco l’uno rispetto all’altro, che hanno descritto il pattern contrattile. È stata stimata una numerosità campionaria di 18 pazienti per gruppo per ottenere una differenza del 20% nell’obiettivo primario con una significatività del 5% (power 80%). Risultati: di 51 pazienti reclutate nello studio, a seguito di drop out 36 sono state sottoposte alla videoregistrazione ecografica (18 per gruppo). Il pattern peristaltico nel gruppo A è risultato alterato in maniera statisticamente significativa rispetto al gruppo B con un p value= 0,02. Sono stati osservati un pattern retrogrado nel 27,8% vs 72,2%, anterogrado del 11,1% vs 16,7%, opposto 38,9% vs 5,6% e random nel 22,2% vs 5,6%, rispettivamente nel gruppo A e B. Il calcolo dell’accordo interosservatore ha portato a un κ value di 0,92. Conclusioni: l’adenomiosi isolata è associata a disperistalsi uterina, che concorrerebbe nello sviluppo dei sintomi tipici dell’adenomiosi. L’ecografia transvaginale rappresenta uno strumento accessibile e utile nella valutazione della contrattilità uterina in quanto il grado di accordo tra gli sperimentatori è ottimo.

Valutazione cinematica complessiva, in vivo e sotto carico, di un modello protesico di caviglia a 3 componenti.

Nonostante le importanti ricadute che gli impianti protesici di caviglia hanno nella qualità della vita dei pazienti che si sottopongono ad intervento di sostituzione articolare, le reali proprietà biomeccaniche e cinematiche in-vivo e sotto carico degli impianti protesici sono state scarsamente studiate e descritte in letteratura. Lo scopo di questa trattazione è quella di valutare la cinematica protesica complessiva, in vivo, attraverso l’utilizzo dell’Analisi Radiostereometrica model-based (MB-RSA) e di ulteriori metodiche clinico-strumentali. La valutazione cinematica è stata permessa dall’analisi della posizione degli impianti attraverso la MB-RSA. Tra gli obiettivi secondari, i pazienti sono stati valutati clinicamente mediante AOFAS Ankle-Hindfoot score e SF-36, mediante full-body gait analysis con sensori inerziali e valutazione posturale-stabilometrica mediante Y Balance Test e workstation dedicata Delos DPPS. I pazienti sottoposti ad iter completo con valutazione clinica e strumentale a fine follow-up sono risultati 18 (2 drop-out). Il ROM complessivo a catena cinetica chiusa ha evidenziato una dorsi-plantarflessione complessiva media di 19.84°. Gli score clinici hanno mostrato tutti un netto miglioramento nel post-operatorio. La gait analysis ha evidenziato uno schema del passo composto dai tre principali spike e compatibile con schemi fisiologici. Dal punto di vista cinematico, i risultati angolari MB-RSA ricavati durante questo lavoro di tesi evidenziano tutti e 6 i gradi di libertà, dato coerente con la mobilità di una caviglia nativa. Valori di articolarità differenti sono stati registrati mediante sensori inerziali. Infine, in una valutazione cinematica complessiva, le possibili implicazioni sul bilanciamento posturale e propriocettivo presente nelle caviglie artrosiche e successivamente sottoposte a sostituzione protesica totale sono ampiamente descritte e discusse. I dati raccolti in questo lavoro di tesi rappresentano il risultato di una valutazione cinematica complessiva, e potranno aiutare a definire una tipologia di soggetto artrosico in cui i risultati siano verosimilmente migliori ed eventualmente a migliorare design e strumentari futuri.

Robust relations between CCN and the vertical evolution of cloud drop size distribution in deep convective clouds

In-situ measurements in convective clouds (up to the freezing level) over the Amazon basin show that smoke from deforestation fires prevents clouds from precipitating until they acquire a vertical development of at least 4 km, compared to only 1-2 km in clean clouds. The average cloud depth required for the onset of warm rain increased by similar to 350 m for each additional 100 cloud condensation nuclei per cm(3) at a super-saturation of 0.5% (CCN0.5%). In polluted clouds, the diameter of modal liquid water content grows much slower with cloud depth (at least by a factor of similar to 2), due to the large number of droplets that compete for available water and to the suppressed coalescence processes. Contrary to what other studies have suggested, we did not observe this effect to reach saturation at 3000 or more accumulation mode particles per cm(3). The CCN0.5% concentration was found to be a very good predictor for the cloud depth required for the onset of warm precipitation and other microphysical factors, leaving only a secondary role for the updraft velocities in determining the cloud drop size distributions. The effective radius of the cloud droplets (r(e)) was found to be a quite robust parameter for a given environment and cloud depth, showing only a small effect of partial droplet evaporation from the cloud's mixing with its drier environment. This supports one of the basic assumptions of satellite analysis of cloud microphysical processes: the ability to look at different cloud top heights in the same region and regard their r(e) as if they had been measured inside one well developed cloud. The dependence of r(e) on the adiabatic fraction decreased higher in the clouds, especially for cleaner conditions, and disappeared at r(e)>=similar to 10 mu m. We propose that droplet coalescence, which is at its peak when warm rain is formed in the cloud at r(e)=similar to 10 mu m, continues to be significant during the cloud's mixing with the entrained air, cancelling out the decrease in r(e) due to evaporation.

Colletotrichum gloeosporioides, a new causal agent of citrus post-bloom fruit drop

Citrus post-bloom fruit drop (caused by Colletotrichum acutatum) frequently occurs in the southwestern region of So Paulo State, Brazil. A survey of Colletotrichum isolates associated with symptoms of post-bloom fruit drop in So Paulo State showed C. gloeosporioides in addition to C. acutatum. The objectives of this study were to confirm the identification of C. gloeosporioides isolated from symptomatic citrus flowers, to test the pathogenicity of C. gloeosporioides isolates, to compare the development of disease caused by C. gloeosporioides and C. acutatum, and to determine the frequency of C. gloeosporioides in a sample of isolates obtained from symptomatic flowers in different regions of So Paulo State. Through the use of species-specific primers by PCR, 17.3% of 139 isolates were C. gloeosporioides, and the remaining 82.7% were C. acutatum. The pathogenicity tests, carried out in 3-year old potted plants of sweet oranges indicated that both species caused typical symptoms of the disease including blossom blight and persistent calyces. Incubation periods (3.5 and 3.9 days, respectively, for C. acutatum and C. gloeosporioides) and fruit sets (6.7 and 8.5%, respectively for C. acutatum and C. gloeosporioides) were similar for both species. The incidences of blossom blight and persistent calyces were higher on plants inoculated with C. acutatum than in those inoculated with C. gloeosporioides. Conidial germination was similar for both species under different temperatures and wetness periods. Under optimal conditions, appressorium formation and melanisation were higher for C. gloeosporioides than for C. acutatum. These results indicated that Colletotrichum gloeosporioides is a new causal agent of post-bloom fruit drop.

Experimental study of drop-interface coalescence in the presence of polymer stabilisers

An experimental study has been carried out to characterise the performance of polymer stabilisers, partially hydrolysed polyvinyl acetate (PVAc), used in suspension polymerisation processes. The stabilisers are ranked by their ability to stabilise the dispersion characterised by the median coalescence time of a single drop with its homophase at a planar liquid/liquid interface. Results show that the stability of the dispersion relates closely to the molecular properties of the PVAcs. Other conditions being equal, PVAcs with higher molecular weights or lower degrees of hydrolysis can better stabilise a liquid-liquid dispersion. The stability of the dispersion also depends strongly on where the PVAc resides. The presence of a PVAc in the dispersed phase significantly reduces stability. Consistent with results reported in the literature, considerable scatter has been observed on the coalescence times of identical drops under the same conditions. An explanation for the scatter is also proposed in the paper, based on the classical Reynolds model for film thinning. (C) 2002 Elsevier Science B.V. All rights reserved.

Carlos Chagas Discoveries as a Drop Back to Scientific Construction of Chronic Chagas Heart Disease

Abstract The scientific construction of chronic Chagas heart disease (CCHD) started in 1910 when Carlos Chagas highlighted the presence of cardiac arrhythmia during physical examination of patients with chronic Chagas disease, and described a case of heart failure associated with myocardial inflammation and nests of parasites at autopsy. He described sudden cardiac death associated with arrhythmias in 1911, and its association with complete AV block detected by Jacquet's polygraph as Chagas reported in 1912. Chagas showed the presence of myocardial fibrosis underlying the clinical picture of CCHD in 1916, he presented a full characterization of the clinical aspects of CCHD in 1922. In 1928, Chagas detected fibrosis of the conductive system, and pointed out the presence of marked cardiomegaly at the chest X-Ray associated with minimal symptomatology. The use of serological reaction to diagnose CCHD was put into clinical practice in 1936, after Chagas' death, which along with the 12-lead ECG, revealed the epidemiological importance of CCHD in 1945. In 1953, the long period between initial infection and appearance of CCHD was established, whereas the annual incidence of CCHD from patients with the indeterminate form of the disease was established in 1956. The use of heart catheterization in 1965, exercise stress testing in 1973, Holter monitoring in 1975, Electrophysiologic testing in 1973, echocardiography in 1975, endomyocardial biopsy in 1981, and Magnetic Resonance Imaging in 1995, added to the fundamental clinical aspects of CCHD as described by Carlos Chagas.

Safety Impacts of Pavement Edge Drop-offs, 2006

A vehicle may leave its travel lane for a number of reasons, such as driver error, poor surface conditions, or avoidance of a collision with another vehicle in the travel lane. When a vehicle leaves the travel lane, pavement edge drop-off poses a potential safety hazard because significant vertical differences between surfaces can affect vehicle stability and reduce a driver’s ability to handle the vehicle. Numerous controlled studies have tested driver response to encountering drop-offs under various conditions, including different speeds, vehicle types, drop-off height and shape, and tire scrubbing versus non-scrubbing conditions. The studies evaluated the drivers’ ability to return to and recover within their own travel lane after leaving the roadway and encountering a drop-off. Many of these studies, however, have used professional drivers as test subjects, so results may not always apply to the population of average drivers. Furthermore, test subjects are always briefed on what generally is to be expected and how to respond; thus, the sense of surprise that a truly naïve driver may experience upon realizing that one or two of his or her tires have just dropped off the edge of the pavement, is very likely diminished. Additionally, the studies were carried out under controlled conditions. The actual impact of pavement edge drop-off on drivers’ ability to recover safely once they leave the roadway, however, is not well understood under actual driving conditions. Additionally, little information is available that quantifies the number or severity of crashes that occur where pavement edge drop-off may have been a contributing factor. Without sufficient information about the frequency of edge drop-off-related crashes, agencies are not fully able to measure the economic benefits of investment decisions, evaluate the effectiveness of different treatments to mitigate edge drop-off, or focus maintenance resources. To address these issues, this report details research to quantify the contribution of pavement edge drop-off to crash frequency and severity. Additionally, the study evaluated federal and state guidance in sampling and addressing pavement edge drop-off and quantified the extent of pavement edge drop-off in two states. This study focused on rural two-lane paved roadways with unpaved shoulders, since they are often high speed facilities (55+ mph), have varying levels of maintenance, and are likely to be characterized by adverse roadway conditions such as narrow lanes or no shoulders.

Intergenerational mobility and the informative content of surnames

We propose an alternative method for measuring intergenerational mobility. Measurements obtained fromtraditional methods (based on panel data) are scarce, difficult to compare across countries and almost impossible to get across time. In particular, this means that we do not know how intergenerational mobility is correlated with growth, income or the degree of inequality.Our proposal is to measure the informative content of surnames in one census. The more information thesurname has on the income of an individual, the more important is her background in determining her outcomes; and thus, the less mobility there is.The reason is that surnames provide information about family relationships because the distribution ofsurnames is necessarily very skewed. A large percentage of the population is bound to have a very unfrequent surname. For them the partition generated by surnames is very informative on family linkages.First, we develop a model whose endogenous variable is the joint distribution of surnames and income.There, we explore the relationship between mobility and the informative content of surnames. We allow for assortative mating to be a determinant of both.Second, we use our methodology to show that in large Spanish region the informative content of surnamesis large and consistent with the model. We also show that it has increased over time, indicating a substantial drop in the degree of mobility. Finally, using the peculiarities of the Spanish surname convention we show that the degree of assortative mating has also increased over time, in such a manner that might explain the decrease in mobility observed.Our method allows us to provide measures of mobility comparable across time. It should also allow us tostudy other issues related to inheritance.

Turbulent heat transfer and pressure drop in pinned annular regions

Experiments were performed to determine average heat transfer coefficients and friction factors for turbulent flow through annular ducts with pin fins. The measurements were carried out by means of a double-pipe heat exchanger. The total number of pins attached to the inner wall of the annular region was 560. The working fluids were air, flowing in the annular channel, and water through the inner circular tube. The average heat transfer coefficients of the pinned air-side were obtained from the experimental determination of the overall heat transfer coefficients of the heat exchanger and from the knowledge of the average heat transfer coefficients of the circular pipe (water-side), which could be found in the pertinent literature. To attain fully developed conditions, the heat exchanger was built with additional lengths before and after the test section. The inner circular duct of the heat exchanger and the pin fins were made of brass. Due to the high thermal conductivity of the brass, the small tube thickness and water temperature variation, the surface of the internal tube was practically isothermal. The external tube was made of an industrial plastic which was insulated from the environment by means of a glass wool batt. In this manner, the outer surface of the annular channel can be considered adiabatic. The results are presented in dimensionless forms, in terms of average Nusselt numbers and friction factors as functions of the flow Reynolds number, ranging from 13,000 to 80,000. The pin fin efficiency, which depends on the heat transfer coefficient, is also determined as a function of dimensionless parameters. A comparison of the present results with those for smooth sections (without pins) is also presented. The purpose of such a comparison is to study the influence of the presence of the pins on the pressure drop and heat transfer rate.

Velocity profiles and frictional pressure drop for shear thinning materials in lid-driven cavities with fully developed axial flow

A finite element numerical study has been carried out on the isothermal flow of power law fluids in lid-driven cavities with axial throughflow. The effects of the tangential flow Reynolds number (Re-U), axial flow Reynolds number (Re-W), cavity aspect ratio and shear thinning property of the fluids on tangential and axial velocity distributions and the frictional pressure drop are studied. Where comparison is possible, very good agreement is found between current numerical results and published asymptotic and numerical results. For shear thinning materials in long thin cavities in the tangential flow dominated flow regime, the numerical results show that the frictional pressure drop lies between two extreme conditions, namely the results for duct flow and analytical results from lubrication theory. For shear thinning materials in a lid-driven cavity, the interaction between the tangential flow and axial flow is very complex because the flow is dependent on the flow Reynolds numbers and the ratio of the average axial velocity and the lid velocity. For both Newtonian and shear thinning fluids, the axial velocity peak is shifted and the frictional pressure drop is increased with increasing tangential flow Reynolds number. The results are highly relevant to industrial devices such as screw extruders and scraped surface heat exchangers. (c) 2006 Elsevier Ltd. All rights reserved.

Evaluation of fungicide applications to sweet orange at different flowering stages for control of postbloom fruit drop caused by Colletotrichum acutatum

Postbloom fruit drop (PFD), caused by Colletotrichum acutatum, produces blossom blight, fruit abscission and persistent calyces. in groves of Pera-Rio and Natal sweet orange located in Santa Cruz do Rio Pardo and Rincao, São Paulo, Brazil, four experiments were carried out to evaluate the effectiveness of fungicides sprayed alone or as mixtures, at different flowering stages for the control of PFD of citrus. The number of symptomatic flowers, the percentage of fruit set (FS), and the relationship between persistent calyces and total fruit weight per plant were evaluated. The fungicides carbendazim and folpet were sprayed at 0.50 ml and 1.25 ga.i. l(-1) of water, respectively, were superior by all the criteria to the other treatments. Carbendazim and folpet fungicides performed best when they were applied at the green bud through hollow ball stages. Difenoconazole, independent of application timing, was less effective by all criteria used. Application of mancozeb at 1.60 ga.i. l(-1) at the green bud stage followed by application of mancozeb in a tank mix with carbendazim or folpet at 1.0 ml and 1.25 g a.i. l(-1), respectively, during green bud bloom and hollow ball stages were effective for disease control. Carbendazim combined with 0.25% KNO3, reduced the number of persistent calyces and increased fruit production significantly. Applications must be made between green bud and hollow ball stages for best control. Applications only at hollow ball or open flower stages did not provide effective disease control. (C)2007 Elsevier Ltd. All rights reserved.

Análise de desempenho de um refrigerador de pequeno porte com drop in de refrigerantes hidrocarbonetos

From what was stated in the Montreal Protocol, the researchers and refrigeration industry seek substitutes for synthetic refrigerants -chlorofluorocarbons (CFCs) and HCFCs (HCFC) - that contribute to the depletion of the ozone layer. The phase-out of these substances was started using as one of the replacement alternatives the synthetic fluids based on hydro fluorocarbons (HFCs) that have zero potential depletion of the ozone layer. However, contribute to the process of global warming. HFC refrigerants are greenhouse gases and are part of the group of gases whose emissions must be reduced as the Kyoto Protocol says. The hydrocarbons (HC's), for not contribute to the depletion of the ozone layer, because they have very low global warming potential, and are found abundantly in nature, has been presented as an alternative, and therefore, are being used in new home refrigeration equipment in several countries. In Brazil, due to incipient production of domestic refrigerators using HC's, the transition refrigerants remain on the scene for some years. This dissertation deals with an experimental evaluation of the conduct of a drinking fountain designed to work with HFC (R-134a), operating with a mixture of HC's or isobutane (R-600a) without any modification to the system or the lubricating oil. In the refrigeration laboratory of Federal University of Rio Grande do Norte were installed, in a drinking fountain, temperature and pressure sensors at strategic points in the refrigeration cycle, connected to an acquisition system of computerized data, to enable the mapping and thermodynamics analysis of the device operating with R-134a or with a mixture of HC's or with R-600a. The refrigerator-test operating with the natural fluids (mixture of HC's or R-600a) had a coefficient of performance (COP) lower than the R-134a

Colorimetric determination of ammonia in air using a hanging drop

A simple and sensitive method for determining atmospheric ammonia (NH3), using a hanging drop, is described. A colorimetric sensor is composed of two optical fibers and the source of monochromatic light implemented was a red light emitting diode (LED) (635 nm). Preliminary experiments were carried out in order to optimize the geometry of the sensor. These tests showed that the best signal absorbance was obtained using a 22 muL deionized water drop for sampling the gas and as addition of 4 muL of each of the reactants to form the blue dye (indophenol). Some important analytical parameters were also studied, including sampling time and flow rate. The analytical curve was constructed with a concentration range of 3-20 ppbv of gaseous NH3 standard. The detection limit reached was of ca 0.5 ppbv. It was observed that formaldehyde and diethylamine did not interfere. However, studies showed that hydrogen sulfide caused a negative interference of 20%, when present in the atmosphere in a concentration equal to that of NE3. The method considered here was shown to be easy to apply, making it possible to make a determination every 17 min.

Seismic sequences analysis for estimation of earthquake source parameters: corner frequency, stress drop, and seismic moment observations

The present study has been carried out with the following objectives: i) To investigate the attributes of source parameters of local and regional earthquakes; ii) To estimate, as accurately as possible, M0, fc, Δσ and their standard errors to infer their relationship with source size; iii) To quantify high-frequency earthquake ground motion and to study the source scaling. This work is based on observational data of micro, small and moderate -earthquakes for three selected seismic sequences, namely Parkfield (CA, USA), Maule (Chile) and Ferrara (Italy). For the Parkfield seismic sequence (CA), a data set of 757 (42 clusters) repeating micro-earthquakes (0 ≤ MW ≤ 2), collected using borehole High Resolution Seismic Network (HRSN), have been analyzed and interpreted. We used the coda methodology to compute spectral ratios to obtain accurate values of fc , Δσ, and M0 for three target clusters (San Francisco, Los Angeles, and Hawaii) of our data. We also performed a general regression on peak ground velocities to obtain reliable seismic spectra of all earthquakes. For the Maule seismic sequence, a data set of 172 aftershocks of the 2010 MW 8.8 earthquake (3.7 ≤ MW ≤ 6.2), recorded by more than 100 temporary broadband stations, have been analyzed and interpreted to quantify high-frequency earthquake ground motion in this subduction zone. We completely calibrated the excitation and attenuation of the ground motion in Central Chile. For the Ferrara sequence, we calculated moment tensor solutions for 20 events from MW 5.63 (the largest main event occurred on May 20 2012), down to MW 3.2 by a 1-D velocity model for the crust beneath the Pianura Padana, using all the geophysical and geological information available for the area. The PADANIA model allowed a numerical study on the characteristics of the ground motion in the thick sediments of the flood plain.