Enabling Blocks for Integrated CMOS UWB Transceivers

The last decades have seen an unrivaled growth and diffusion of mobile telecommunications. Several standards have been developed to this purposes, from GSM mobile phone communications to WLAN IEEE 802.11, providing different services for the the transmission of signals ranging from voice to high data rate digital communications and Digital Video Broadcasting (DVB). In this wide research and market field, this thesis focuses on Ultra Wideband (UWB) communications, an emerging technology for providing very high data rate transmissions over very short distances. In particular the presented research deals with the circuit design of enabling blocks for MB-OFDM UWB CMOS single-chip transceivers, namely the frequency synthesizer and the transmission mixer and power amplifier. First we discuss three different models for the simulation of chargepump phase-locked loops, namely the continuous time s-domain and discrete time z-domain approximations and the exact semi-analytical time-domain model. The limitations of the two approximated models are analyzed in terms of error in the computed settling time as a function of loop parameters, deriving practical conditions under which the different models are reliable for fast settling PLLs up to fourth order. Besides, a phase noise analysis method based upon the time-domain model is introduced and compared to the results obtained by means of the s-domain model. We compare the three models over the simulation of a fast switching PLL to be integrated in a frequency synthesizer for WiMedia MB-OFDM UWB systems. In the second part, the theoretical analysis is applied to the design of a 60mW 3.4 to 9.2GHz 12 Bands frequency synthesizer for MB-OFDM UWB based on two wide-band PLLs. The design is presented and discussed up to layout level. A test chip has been implemented in TSMC CMOS 90nm technology, measured data is provided. The functionality of the circuit is proved and specifications are met with state-of-the-art area occupation and power consumption. The last part of the thesis deals with the design of a transmission mixer and a power amplifier for MB-OFDM UWB band group 1. The design has been carried on up to layout level in ST Microlectronics 65nm CMOS technology. Main characteristics of the systems are the wideband behavior (1.6 GHz of bandwidth) and the constant behavior over process parameters, temperature and supply voltage thanks to the design of dedicated adaptive biasing circuits.

IEEE 802.21: Media Independent Handover

In questo lavoro, dopo un'introduzione sul panorama contemporaneo, si è analizzato lo standard IEEE 802.21, illustrandone i motivi che hanno portato al suo sviluppo, la timeline del processo di standardizzazione, gli obbiettivi del working group, l'architettura del sistema specificato e le sue funzionalità, con particolare riguardo all'utilità in applicazioni reali, al fine di darne un giudizio completo sulla sua effettiva efficacia. Dopo aver citato qualche esempio di possibile applicazione dello standard e descritto lo stato attuale dell'arte, si è studiata una sua implementazione cross-platform chiamata ODTONE, descrivendone i vari componenti e le loro funzionalità, ma anche sottolineando le attuali mancanze per arrivare ad una implementazione completa sotto tutti i punti di vista. Successivamente si è studiata ed implementata un'applicazione, MIH-proxy, che potesse sfruttare in modo costruttivo i servizi specificati dallo standard per creare un proxy che potesse scegliere su quale interfaccia instradare i pacchetti a seconda dello stato attuale di tutti i collegamenti, realizzato in versione unidirezionale e bidirezionale. In particolare questa applicazione è in grado di restare in ascolto di cambiamenti di stato delle interfacce di rete, e.g. quando viene stabilita una connessione oppure cade, e, di conseguenza, stabilire di volta in volta quali collegamenti utilizzare per inviare dati. Nella versione bidirezionale è anche possibile far comunicare tra loro applicazioni che normalmente utilizzerebbero il protocollo di trasporto TCP attraverso un ulteriore componente, phoxy, che si preoccupa di convertire, in modo trasparente, un flusso TCP in datagrammi UDP eventualmente cifrati. Sarà quindi possibile creare un collegamento criptato ad alta affidabilità tra le applicazioni che possa sfruttare tutte le interfacce disponibili, sia per inviare, sia per ricevere.

Una rassegna delle tecnologie di rete wireless WRAN IEEE 802.22 e mobile WiMAX IEEE 802.16e

Lo scopo di questa tesi è quello di illustrare gli standard IEEE 802.22 WRAN e IEEE 802.16e Mobile WiMAX. Di questi standard verranno analizzate le caratteristiche principali, i metodi di funzoinamento ed alcuni protocolli. Nel primo capitolo viene fatta una breve spiegazione delle tecnologie wireless con un focus sullo spettro radio, sulle tecniche di modulazione dell’onda radio, sugli scenari operativi LOS, nLOS ed NLOS, sulle tecniche di duplexing e le tecniche di accesos multiplo, inoltre vengono brevente illustrate alcune delle problematiche che affliggono le trasmissioni senza fili ed infine vengono illustrate i quattro più comuni livelli di QoS. Nel secondo capitolo viene illustrato lo standard IEEE 802.22 con un focus sullo stato dell’arte della tecnologia WRAN, come si è sviluppato lo standard e per quali motivi è stato redatto, lo spettro di frequeza utilizzato e come, il funzionamento delle Cognitive Radio, i dispositivi che caratterizzano le reti WRAN e la topologia di rete utilizzata. In seguito sono spiegati nello specifico i livelli fisico e MAC e le loro caratteristiche e metodi di funzionamento. Nel terzo capitolo vengono illustrate le caratteristiche dello standard IEEE 802.16e cercando di riprendere gli stessi punti toccati nel capitolo precedente con una caratterizzazione dello standard nei suoi particolari.

Comunicazioni wireless ieee 802.15.4 in sistemi a microcontrollore

Studio e realizzazione di una rete wireless di microcontrollori dotati di sensori, che comunicano mediante protocollo ZigBee (basato sul protocollo IEEE 802.15.4).

A Passive Source Localization System for IEEE 802.15.4 Signal

In this work, we provide a passive location monitoring system for IEEE 802.15.4 signal emitters. The system adopts software defined radio techniques to passively overhear IEEE 802.15.4 packets and to extract power information from baseband signals. In our system, we provide a new model based on the nonlinear regression for ranging. After obtaining distance information, a Weighted Centroid (WC) algorithm is adopted to locate users. In WC, each weight is inversely proportional to the nth power of propagation distance, and the degree n is obtained from some initial measurements. We evaluate our system in a 16m-18m area with complex indoor propagation conditions. We are able to achieve a median error of 2:1m with only 4 anchor nodes.

A low power routing algorithm for localization in IEEE 802.15.4 networks

Many context-aware applications rely on the knowledge of the position of the user and the surrounding objects to provide advanced, personalized and real-time services. In wide-area deployments, a routing protocol is needed to collect the location information from distant nodes. In this paper, we propose a new source-initiated (on demand) routing protocol for location-aware applications in IEEE 802.15.4 wireless sensor networks. This protocol uses a low power MAC layer to maximize the lifetime of the network while maintaining the communication delay to a low value. Its performance is assessed through experimental tests that show a good trade-off between power consumption and time delay in the localization of a mobile device.

Análise do padrão IEEE 802.11g para a comunicação do sistema de controle distribuído de semáforos.

Este trabalho propõe a análise da comunicação sem fio para um sistema de controle distribuído de semáforos, a partir da revisão das literaturas, realização de simulações e experimentos, os quais consideram as especificações estabelecidas para o sistema de semáforos. As simulações e os experimentos se baseiam na avaliação do comportamento da comunicação perante a alteração de alguns parâmetros de configuração da rede. O estudo apresentado envolve análises relacionadas ao padrão IEEE 802.11g e às definições da camada física apresentadas nas especificações do padrão. Os métodos utilizados envolvem o estudo e experimentação de parâmetros relacionados à potência de transmissão e recepção, além de análise dos esquemas de modulação utilizados pelo padrão IEEE 802.11g. A metodologia aplicada a este trabalho envolve o conhecimento das características e capacidade dos esquemas de modulação responsáveis pela definição das taxas de transmissão. As análises mostram que a possibilidade de adequação dos parâmetros de configuração de rede, levando em consideração o cenário de aplicação, pode ser um fator essencial para o bom desempenho de todo o sistema.

Layer 2.5 Network Coding to Improve 802.11 Network Efficiency

Thesis (Master's)--University of Washington, 2016-06

An accurate and scalable analytical model for IEEE 802.15.4 slotted CSMA/CA networks

In this paper a Markov chain based analytical model is proposed to evaluate the slotted CSMA/CA algorithm specified in the MAC layer of IEEE 802.15.4 standard. The analytical model consists of two two-dimensional Markov chains, used to model the state transition of an 802.15.4 device, during the periods of a transmission and between two consecutive frame transmissions, respectively. By introducing the two Markov chains a small number of Markov states are required and the scalability of the analytical model is improved. The analytical model is used to investigate the impact of the CSMA/CA parameters, the number of contending devices, and the data frame size on the network performance in terms of throughput and energy efficiency. It is shown by simulations that the proposed analytical model can accurately predict the performance of slotted CSMA/CA algorithm for uplink, downlink and bi-direction traffic, with both acknowledgement and non-acknowledgement modes.

On bandwidth request mechanism with piggyback in fixed IEEE 802.16 networks

This paper investigates the random channel access mechanism specified in the IEEE 802.16 standard for the uplink traffic in a Point-to-MultiPoint (PMP) network architecture. An analytical model is proposed to study the impacts of the channel access parameters, bandwidth configuration and piggyback policy on the performance. The impacts of physical burst profile and non-saturated network traffic are also taken into account in the model. Simulations validate the proposed analytical model. It is observed that the bandwidth utilization can be improved if the bandwidth for random channel access can be properly configured according to the channel access parameters, piggyback policy and network traffic.

An accurate Markov model for slotted CSMA/CA algorithm in IEEE 802.15.4 networks

In this letter we propose an Markov model for slotted CSMA/CA algorithm working in a non-acknowledgement mode, specified in IEEE 802.15.4 standard. Both saturation throughput and energy consumption are modeled as functions of backoff window size, number of contending devices and frame length. Simulations show that the proposed model can achieve a very high accuracy (less than 1% mismatch) if compared to all existing models (bigger than 10% mismatch).

Performance comparison of OFDM bandwidth request schemes in fixed IEEE 802.16 networks

IEEE 802.16 standard specifies two contention based bandwidth request schemes working with OFDM physical layer specification in point-to-multipoint (PMP) architecture, the mandatory one used in region-full and the optional one used in region-focused. This letter presents a unified analytical model to study the bandwidth efficiency and channel access delay performance of the two schemes. The impacts of access parameters, available bandwidth and subchannelization have been taken into account. The model is validated by simulations. The mandatory scheme is observed to perform closely to the optional one when subchannelization is active for both schemes.

A dynamic bandwidth reservation scheme for hybrid IEEE 802.16 wireless networks

A dynamic bandwidth reservation (DBR) scheme for hybrid IEEE 802.16 wireless networks is investigated, in which 802.16 networks serve as the backhaul for client networks, such as WiFi hotspots and cellular networks. The DBR scheme implemented in the subscription stations (SSs) (co-locating with access pointers) consists of two components: connection admission controller (CAC), and bandwidth controller (BC). The CAC processes the received connection set-up requests from the client networks connected to the SSs. The BC manages the request and release of bandwidth from the base station (BS). It dynamically changes the reserved bandwidth between a small number of values. Hysteresis is incorporated in bandwidth release to reduce bandwidth request signalling load and connection blocking probability. An analytical model is proposed to evaluate the performances of reserved bandwidth, connection blocking probability and signalling load. The impacts of hysteresis mechanism and probability of reservation request blocking are taken into account. Simulation verifies the analytical model. ©2008 IEEE.

Investigation of uncoordinated coexisting IEEE 802.15.4 networks with sleep mode for machine-to-machine communications

The low-energy consumption of IEEE 802.15.4 networks makes it a strong candidate for machine-to-machine (M2M) communications. As multiple M2M applications with 802.15.4 networks may be deployed closely and independently in residential or enterprise areas, supporting reliable and timely M2M communications can be a big challenge especially when potential hidden terminals appear. In this paper, we investigate two scenarios of 802.15.4 network-based M2M communication. An analytic model is proposed to understand the performance of uncoordinated coexisting 802.15.4 networks. Sleep mode operations of the networks are taken into account. Simulations verified the analytic model. It is observed that reducing sleep time and overlap ratio can increase the performance of M2M communications. When the networks are uncoordinated, reducing the overlap ratio can effectively improve the network performance. © 2012 Chao Ma et al.