Spontaneous and stimulated light emission due to radiative recombination in forward biased lead telluride P-N junctions

Since the discovery in 1962 of laser action in semiconductor diodes made from GaAs, the study of spontaneous and stimulated light emission from semiconductors has become an exciting new field of semiconductor physics and quantum electronics combined. Included in the limited number of direct-gap semiconductor materials suitable for laser action are the members of the lead salt family, i.e . PbS, PbSe and PbTe. The material used for the experiments described herein is PbTe . The semiconductor PbTe is a narrow band- gap material (E_g = 0.19 electron volt at a temperature of 4.2°K). Therefore, the radiative recombination of electron-hole pairs between the conduction and valence bands produces photons whose wavelength is in the infrared (λ ≈ 6.5 microns in air).

The p-n junction diode is a convenient device in which the spontaneous and stimulated emission of light can be achieved via current flow in the forward-bias direction. Consequently, the experimental devices consist of a group of PbTe p-n junction diodes made from p –type single crystal bulk material. The p - n junctions were formed by an n-type vapor- phase diffusion perpendicular to the (100) plane, with a junction depth of approximately 75 microns. Opposite ends of the diode structure were cleaved to give parallel reflectors, thereby forming the Fabry-Perot cavity needed for a laser oscillator. Since the emission of light originates from the recombination of injected current carriers, the nature of the radiation depends on the injection mechanism.

The total intensity of the light emitted from the PbTe diodes was observed over a current range of three to four orders of magnitude. At the low current levels, the light intensity data were correlated with data obtained on the electrical characteristics of the diodes. In the low current region (region A), the light intensity, current-voltage and capacitance-voltage data are consistent with the model for photon-assisted tunneling. As the current is increased, the light intensity data indicate the occurrence of a change in the current injection mechanism from photon-assisted tunneling (region A) to thermionic emission (region B). With the further increase of the injection level, the photon-field due to light emission in the diode builds up to the point where stimulated emission (oscillation) occurs. The threshold current at which oscillation begins marks the beginning of a region (region C) where the total light intensity increases very rapidly with the increase in current. This rapid increase in intensity is accompanied by an increase in the number of narrow-band oscillating modes. As the photon density in the cavity continues to increase with the injection level, the intensity gradually enters a region of linear dependence on current (region D), i.e. a region of constant (differential) quantum efficiency.

Data obtained from measurements of the stimulated-mode light-intensity profile and the far-field diffraction pattern (both in the direction perpendicular to the junction-plane) indicate that the active region of high gain (i.e. the region where a population inversion exists) extends to approximately a diffusion length on both sides of the junction. The data also indicate that the confinement of the oscillating modes within the diode cavity is due to a variation in the real part of the dielectric constant, caused by the gain in the medium. A value of τ ≈ 10^-9 second for the minority- carrier recombination lifetime (at a diode temperature of 20.4°K) is obtained from the above measurements. This value for τ is consistent with other data obtained independently for PbTe crystals.

Data on the threshold current for stimulated emission (for a diode temperature of 20. 4°K) as a function of the reciprocal cavity length were obtained. These data yield a value of J’_th = (400 ± 80) amp/cm² for the threshold current in the limit of an infinitely long diode-cavity. A value of α = (30 ± 15) cm^-1 is obtained for the total (bulk) cavity loss constant, in general agreement with independent measurements of free- carrier absorption in PbTe. In addition, the data provide a value of n_s ≈ 10% for the internal spontaneous quantum efficiency. The above value for n_s yields values of t_b ≈ τ ≈ 10^-9 second and t_s ≈ 10^-8 second for the nonradiative and the spontaneous (radiative) lifetimes, respectively.

The external quantum efficiency (n_d) for stimulated emission from diode J-2 (at 20.4° K) was calculated by using the total light intensity vs. diode current data, plus accepted values for the material parameters of the mercury- doped germanium detector used for the measurements. The resulting value is n_d ≈ 10%-20% for emission from both ends of the cavity. The corresponding radiative power output (at λ = 6.5 micron) is 120-240 milliwatts for a diode current of 6 amps.

Length-weight relationships of fishes from tributaries of the Volta River, Ghana: Part II and Conclusion

Slopes and intercepts of length-weight relationships obtained from 37 populations from the rivers Oti, Pru and Black Volta in Ghana were compared using a one way analysis of covariance with fixed effects. Although no significant differences were obtained from this analysis, an ANOVA comparing the magnitudes of mean condition factors (Wx100/SL3) found 9 out of 37 populations significantly different at the 0.05 level. A two-way nested ANOVA using all populations combined, however, did not yield any significant differences between the three rivers. Thus, pooling the data to obtain the results presented in Part I (see Entsua-Mensah et al. Naga 1995) is justified here.

Length-weight relationships for some important forage crustaceans from South Africa

The diet of marine animals is usually determined by stomach content analysis. Although partially digested prey fragments can often be identified to species level, it is difficult to estimate the original mass of the prey organism. This information, however, is essential for calculating both the total food intake as well as the relative contribution of each prey item. In this study we present regression equations that can be used to estimate the original mass of 18 common South African crustaceans from various indigestible fragments such as the carapace (length and width), chelae (length and width of left and right dactylus) and eye (length and width).

Age, growth, mortality, and radiometric age validation of gray snapper (Lutjanus griseus) from Louisiana

The gray snapper (Lutjanus griseus) is a temperate and tropical reef fish that is found along the Gulf of Mexico and Atlantic coasts of the southeastern United States. The recreational fishery for gray snapper has developed rapidly in south Louisiana with the advent of harvest and seasonal restrictions on the established red snapper (L. campechanus) fishery. We examined the age and growth of gray snapper in Louisiana with the use of cross-sectioned sagittae. A total of 833 specimens, (441 males, 387 females, and 5 of unknown sex) were opportunistically sampled from the recreational fishery from August 1998 to August 2002. Males ranged in size from 222 to 732 mm total length (TL) and from 280 g to 5700 g total weight (TW) and females ranged from 254 to 756 mm TL and from 340 g to 5800 g TW. Both edge analysis and bomb radiocarbon analyses were used to validate otolith-based age estimates. Ages were estimated for 718 individuals; both males and females ranged from 1 to 28 years. The von Bertalanffy growth models derived from TL at age were Lt = 655.4{1–e[–0.23(t)]} for males, Lt = 657.3{1–e[– 0.21(t)]} for females, and L t = 656.4{1–e[– 0.22 (t)]} for all specimens of known sex. Catch curves were used to produce a total mortality (Z) estimate of 0.17. Estimates of M calculated with various methods ranged from 0.15 to 0.50; however we felt that M= 0.15 was the most appropriate estimate based on our estimate of Z. Full recruitment to the gray snapper recreational fishery began at age 4, was completed by age 8, and there was no discernible peak in the catch curve dome.

Comparison of Standard Length, Fork Length, and Total Length for Measuring West Coast Marine Fishes

Measurements of adult marine fishes on the U.S. west coast are usually made using one of three methods: standard length, fork length, or total length. Each method has advantages and disadvantages. In this paper we attempt to determine whether one method is faster and/or more reliable than the other methods. We found that all three methods were comparable. There was no appreciable difference in the time it took to measure fish using the different methods. Fork length had the most reproducible results; however, it had the highest level of bias between researchers. We therefore suggest that selection of measurement type be based on what other researchers have used for the species under study. The best improvement in measurement reliability probably occurs by adequate training of personnel and not type of measurement used.

Temporal and spatial dynamics of spawning, settlement, and growth of gray snapper (Lutjanus griseus) from the West Florida shelf as determined from otolith microstructures

The goal of our study was to understand the spatial and temporal variation in spawning and settlement of gray snapper (Lutjanus griseus) along the West Florida shelf (WFS). Juvenile gray snapper were collected over two consecutive years from seagrass meadows with a benthic scrape and otter trawl. Spawning, settlement, and growth patterns were compared across three sampling regions (Panhandle, Big bend, and Southwest) by using otolith microstructure. Histology of adult gonads was also used for an independent estimate of spawning time. Daily growth increments were visible in the lapilli of snapper 11–150 mm standard length; ages ranged from 38 to 229 days and estimated average planktonic larval duration was 25 days. Estimated growth rates ranged from 0.60 to 1.02 mm/d and did not differ among the three sampling regions, but did differ across sampling years. Back-calculated fertilization dates from otoliths indicated that juveniles in the Panhandle and Big Bend were mainly summer spawned fish, whereas Southwest juveniles had winter and summer fertilization dates. Settlement occurred during summer both years and in the winter of 1997 for the southern portion of the WFS. Moon phase did not appear to be strongly correlated with fertilization or settlement. Histological samples of gonads from adults collected near the juvenile sampling areas indicated a summer spawning period.

Length-weight relationship of Upeneus sulphureus (Cuvier) collected off Maharashtra coast

The length-weight relationship of Upeneus sulphureus was studied on the basis of 125 females and 103 males, collected during the 27th cruise of research vessel M.V. Saraswati in the month of September, 1984. The correlation coefficient was found significant at 5% and 1% level respectively for male and female. In both the sexes, the regression co-efficient was found higher than three. Analysis of covariance was also carried out for the F test and F distribution.

Effect of dietary protein level on the growth of Deccan mahseer fry Tor khudree Sykes

Four feeds having different protein levels were separately tested on Tor khudree fry having an average length of 23.5 mm and weight 55 mg. The best average growth of 15.66 mg and 0.456 mm/day was obtained with Feed IV which comprised rice bran, ground nut oil cake, Acetes, wheat flour and mineral mix at the ratio of 1:1:1:0.7143:0.01428. These constitute 35.29% of proteins. The Feed II which comprised R.B + G.O.C. + prawn shell + wheat flour and mineral mix at a ratio of 1:1:1:0.7143:0.01428 contained 32.61% crude proteins. It provided a growth rate of 14.83 mg and 0.440 mm per day. The conversion rates were 38.258 and 37.776 for feeds IV and II respectively. Since Feed II is cheaper than Feed IV and provides almost equal growth rate, it can be used in the nurseries for intensive rearing of T. khudree fry.

Length weight relationship and biometric study on three species of sciaenids from Bombay water

The length-weight relationship and biometric study of three species of sciaenids viz. Othlithes cuvieri, Johnieops vogleri and Johnius macrorhynus are reported. For all the three species the regression coefficient between the sexes was found to be not significant at 5% level. Biometric study indicates that correlation among the various characters compared was fairly good while the meristic data agree well with published data.

Optical gap in carbon nitride films

In this paper we study the effect of introducing nitrogen into different carbon networks. Two kinds of carbon nitride films were deposited: (a) Using a DC-magnetron sputtering system sp2 bonded carbon nitride (a-CN) films were deposited and (b) Using a combination of filtered cathodic vacuum arc and a low-pressure N2 plasma source, N was introduced into sp3 carbon networks (ta-C), leading to the formation of a more dense CN film named ta-CN. For ta-CN films we found that the optical gap initially decreases as the N content and the sp2 fraction rises, but above a certain N quantity there is a level-off of the value, and the gap then remains constant despite further increases in the fraction and clustering of the sp2 phase. However, for a-CN films the optical gap increases with the nitrogen content. These two different trends are not easily explained using the same framework as that for carbon films, in which any decrease in the band gap is associated to an increase in the sp2 fraction or its clustering. Here we discuss the conditions that lead to high optical gap in sp2-bonded carbon nitride samples, which are clearly not associated to the presence of any crystalline super-hard phase. We also compared other differences in properties observed between the two films, such as deposition rate, infrared and Raman spectra. © 2003 Elsevier Science B.V. All rights reserved.

On the eye diameter-total length relationship of the Indian mackerel Rastrelliger kanagurta (Cuvier)

Results of studies of chemical, bacteriological and organoleptic quality of cured fish collected from four major curing centres along the Tamil Nadu coast are reported. Only 32.43% of the samples had moisture level below 35%, 0.9% had salt 25% and above. None of the samples showed acid insoluble ash below 1.5%. The main defects were unhygienic processing, inadequate salting, use of poor quality salt and incomplete drying. Recommendations for improvement of quality are given.

Length-weight relationship and relative condition factor in Daysciaena albida (Cuv.) and Gerres filamentosus (Cuv.)

The length-weight relationship of Daysciaena albida and Gerres filamentosus were calculated separately for indeterminants, mature males and mature females. The logarithmic regression equation obtained for D. albida - males: log w = -1.5055 + 2.8618 log l; females: log w = -0.9260 + 2.4089 log l; indeterminants: log w = -l.7188 + 3.0616 log l. The regression co-efficients between males and females, males and in determinants and female and in determinants showed significant differences. In G. filamentosus the relationship can be expressed as males: log w = -1.3224 + 2.8740 log 1; females: log w = -1.2874 + 2.8381 log l; indeterminants: log w = -0.8167 + 2.2558 log l. The difference in regression co-efficients between male and female are insignificant at 5% level whereas significant differences were observed between males and indeterminants and females and indeterminants. The relative condition factor (Kn) was calculated for the above two species. In D. albida the reasons for the fluctuations of Kn values can be attributed to both spawning cycle as well as feeding intensity whereas in G. filamentosus it synchronies mainly with spawning cycle.

Device and circuit-level performance of carbon nanotube field-effect transistor with benchmarking against a nano-MOSFET

The performance of a semiconducting carbon nanotube (CNT) is assessed and tabulated for parameters against those of a metal-oxide-semiconductor field-effect transistor (MOSFET). Both CNT and MOSFET models considered agree well with the trends in the available experimental data. The results obtained show that nanotubes can significantly reduce the drain-induced barrier lowering effect and subthreshold swing in silicon channel replacement while sustaining smaller channel area at higher current density. Performance metrics of both devices such as current drive strength, current on-off ratio (Ion/Ioff), energy-delay product, and power-delay product for logic gates, namely NAND and NOR, are presented. Design rules used for carbon nanotube field-effect transistors (CNTFETs) are compatible with the 45-nm MOSFET technology. The parasitics associated with interconnects are also incorporated in the model. Interconnects can affect the propagation delay in a CNTFET. Smaller length interconnects result in higher cutoff frequency. © 2012 Tan et al.

Closing the Energy Efficiency Gap: A study linking demographics with barriers to adopting energy efficiency measures in the home

This paper presents a study which linked demographic variables with barriers affecting the adoption of domestic energy efficiency measures in large UK cities. The aim was to better understand the 'Energy Efficiency Gap' and improve the effectiveness of future energy efficiency initiatives. The data for this study was collected from 198 general population interviews (1.5-10 min) carried out across multiple locations in Manchester and Cardiff. The demographic variables were statistically linked to the identified barriers using a modified chi-square test of association (first order Rao-Scott corrected to compensate for multiple response data), and the effect size was estimated with an odds-ratio test. The results revealed that strong associations exist between demographics and barriers, specifically for the following variables: sex; marital status; education level; type of dwelling; number of occupants in household; residence (rent/own); and location (Manchester/Cardiff). The results and recommendations were aimed at city policy makers, local councils, and members of the construction/retrofit industry who are all working to improve the energy efficiency of the domestic built environment. © 2012 Elsevier Ltd.

Industrial ecology at factory level: A prototype methodology

The concept of sustainable manufacturing is a form of pollution prevention that integrates environmental considerations in the production of goods while focusing on efficient resource use. Taking the industrial ecology perspective, this efficiency comes from improved resource flow management. The assessment of material, energy and waste resource flows, therefore, offers a route to viewing and analysing a manufacturing system as an ecosystem using industrial ecology biological analogy and can, in turn, support the identification of improvement opportunities in the material, energy and waste flows. This application of industrial ecology at factory level is absent from the literature. This article provides a prototype methodology to apply the concepts of industrial ecology using material, energy and waste process flows to address this gap in the literature. Various modelling techniques were reviewed and candidates selected to test the prototype methodology in an industrial case. The application of the prototype methodology showed the possibility of using the material, energy and waste resource flows through the factory to link manufacturing operations and supporting facilities, and to identify potential improvements in resource use. The outcomes of the work provide a basis to build the specifications for a modelling tool that can support those analysing their manufacturing system to improve their environmental performance and move towards sustainable manufacturing. © IMechE 2012.