Levels of nutrients and grain yield of maize intercropped with signalgrass (Brachiaria) in different arrangements of plants

Competition between maize and signalgrass can economically cripple the intercropping by the reduced yield of maize and dry matter content of the forage. In seeking to define plant arrangements which make this system more efficient, this research was held with the objective of assessing the effects of interference of densities of signalgrass (Urochloa Brizantha) on nutrition and on maize grain yield. Two field experiments were conducted in a randomized block design with four replications. Treatments were arranged similarly in both experiments, in a 2 x 4 factorial design, the first factor being the dose of Nicosulfuron herbicide applied (0 and 8 g ha-1) and the second factor being the forage seeding rates (0, 2, 4 and 6 kg of seeds per hectare). The interference of signalgrass reduced foliar nitrogen, potassium and phosphorus content in maize plants intercropped with the forage. Higher values of grain yield were observed with the reduction of the spacing and the application of the recommended herbicide underdose (8 g ha-1). It was concluded that, regardless of the seeding density of U. Brizantha, reducing the maize seeding inter-rows spacing, combined with the application of an underdose of Nicosulfuron, caused a positive effect by reducing the initial forage growth, resulting in less interference of Urochloa brizantha on nutrient uptake by the maize plants and grain yield of the crop.

Storage substances in the androgametogenesis and mature pollen grain of Ilex paraguariensis St. Hil. (Aquifoliaceae)

Storage substances such as starch grains, proteins and lipids were studied during the male gametogenesis and in the mature pollen grain of Ilex paraguariensis St. Hil. (Aquifoliaceae). There are two cycles of amylogenesis and amylolyse. The first cycle lasts until the vacuolated stage when the starch is hydrolyzed and amorphous proteins are stored inside the single vacuole. The next cycle begins after mitosis with the formation of the vegetative and generative cells. At this point, the young vegetative cell stores many starch grains that are bigger than in the first cycle. During the maturation of the male gametophyte, the starch is hydrolyzed and it is absent in the mature pollen grain. Small lipid droplets surround the young generative cell after the mitosis of the androspore and are dispersed in the vegetative cytoplasm during its maturity. The relationship between the pollen storage substances and the ontogeny of the layers in the sporoderm, formation of the generative cell, and the male germ unit were discussed.

Cypsela or achene? Refining terminology by considering anatomical and historical factors

The worry about the indiscriminate use of the terms cypsela and achene for the fruits of Asteraceae has been frequently detached by specialists in this family. The present work was developed aiming to verify the existence of arguments to justify the adoption of a term against the other. After historical and anatomical analysis, we concluded that there is technical basis to consider cypsela and achene as different types of fruits. For Asteraceae, the correct is to call cypsela; achenes are only derived from superior ovaries, as in Plumbaginaceae.

Two point deterministic model for acquisition of in vitro pollen grain androgenetic capacity based on wheat studies

This article discusses, from the standpoint of cellular biology, the deterministic and indeterministic androgenesis theories. The role of the vacuole and of various types of stresses on deviation of the microspore from normal development and the point where androgenetic competence is acquired are examined. Based on extensive literature review and data on wheat studies from our laboratory, a model for androgenetic capacity of pollen grain is proposed. A two point deterministic model for in vitro androgenesis is our proposal for acquisition of androgenetic potential of the pollen grain: the first switch point would be early meiosis and the second switch point the uninucleate pollen stage, because the elimination of cytoplasmatic sporophytic determinants takes place at those two strategic moments. Any abnormality in this process allowing the maintenance of sporophytic informational molecules results in the absence of establishment of a gametophytic program, allowing the reactivation of the embryogenic process

Silicon-containing species in used lube oil re-refining

Nowadays, the re-refining of the used lube oils has gained worldwide a lot of attention due to the necessity for added environmental protection and increasingly stringent environmental legislation. One of the parameters determining the quality of the produced base oils is the composition of feedstock. Estimation of the chemical composition of the used oil collected from several European locations showed that the hydrocarbon structure of the motor oil is changed insignificantly during its operation and the major part of the changes is accounted for with depleted oil additives. In the lube oil re-refining industry silicon, coming mainly from antifoaming agents, is recognized to be a contaminant generating undesired solid deposits in various locations in the re-refining units. In this thesis, a particular attention was paid to the mechanism of solid product formation during the alkali treatment process of silicon-containing used lube oils. The transformations of a model siloxane, tetramethyldisiloxane (TMDS), were studied in a batch reactor at industrially relevant alkali treatment conditions (low temperature, short reaction time) using different alkali agents. The reaction mechanism involving solid alkali metal silanolates was proposed. The experimental data obtained demonstrated that the solids were dominant products at low temperature and short reaction time. The liquid products in the low temperature reactions were represented mainly by linear siloxanes. The prolongation of reaction time resulted in reduction of solids, whereas both temperature and time increase led to dominance of cyclic products in the reaction mixture. Experiments with the varied reaction time demonstrated that the concentration of cyclic trimer being the dominant in the beginning of the reaction diminished with time, whereas the cyclic tetramer tended to increase. Experiments with lower sodium hydroxide concentration showed the same effect. In addition, a decrease of alkali agent concentration in the initial reaction mixture accelerated TMDS transformation reactions resulting in solely liquid cyclic siloxanes yields. Comparison of sodium and potassium hydroxides applied as an alkali agent demonstrated that potassium hydroxide was more efficient, since the activation energy in KOH presence was almost 2-fold lower than that for sodium hydroxide containing reaction mixture. Application of potassium hydroxide for TMDS transformation at 100° C with 3 hours reaction time resulted in 20 % decrease of solid yields compared to NaOH-containing mixture. Moreover, TMDS transformations in the presence of sodium silanolate applied as an alkali agent led to formation of only liquid products without formation of the undesired solids. On the basis of experimental data and the proposed reaction mechanism, a kinetic model was developed, which provided a satisfactory description of the experimental results. Suitability of the selected siloxane as a relevant model of industrial silicon-containing compounds was verified by investigation of the commercially available antifoam agent in base-catalyzed conditions.

Wooden packaging waste reuse and refining

The aim of the thesis was both to study wooden packaging waste reuse and refining generated in the forestry machine factory environment, and to find alternative wooden packaging waste utilization options in order to create a new operating model which would decrease the overall amount of waste produced. As environmental and waste legislation has become more rigid and companies' own environmental management systems’ requirements and control have increased, companies have had to consider their environmental aspects more carefully. Companies have to take into account alternative ways of reducing waste through an increase in reuse and recycling. A part of this waste is from different forms of packaging. In the metal industry the most heavily used packaging material is wooden packaging, as such material is heavy and the packaging has to be able to bear heavy stress. In the theoretical part of the thesis, the requirements of packaging and packaging waste legislation, as well as environmental management systems governing companies’ processing of their packaging waste, are studied. The theoretical part includes a process study of systems, which direct packaging waste and wooden packaging waste refining. In addition, methods related to the continuous improvement of these processes are introduced. This thesis concentrates on designing and creating a new operating model in relation to wooden packaging waste processing. The main target was to find an efficient model in order to decrease the total amount of wooden packaging waste and to increase refining. The empirical part introduces methods for approaches to wooden packaging waste re-utilization, as well as a description of a new operating model and its impact.

Application of the Hsu model to soybean grain hydration

A comparative analysis of the theoretical-experimental study, developed by Hsu on the hydration of Amsoy 71 soybean grain, was performed through several soaking experiments using CD 202 soybean at 10, 20, 30, 40, and 50 °C, measuring moisture content over time. The results showed that CD 202 soybean equilibrium moisture content, Xeq, does not depend on temperature and is 21% higher than that found by Hsu, suggesting that soybean cultivar exerts great influence on Xeq. The Hsu model was numerically solved and its parameters were adjusted by the least squares method, with maximum deviations of +/- 10% relative to the experimental values. The limiting step in the mass transfer process during hydration corresponds to water diffusion inside the grain, leading to radial moisture gradients that decrease over time and with an increase in temperature. Regardless of the soybean cultivar, diffusivity increases as temperature or moisture content increases. However, the values of this transport property for Amsoy 71 were superior to those of CD 202, very close at the beginning of hydration at 20 °C and almost three times higher at the end of hydration at 50 °C.

Influence of xylanase addition on the characteristics of loaf bread prepared with white flour or whole grain wheat flour

The aim of this study was to verify the influence of the addition of the enzyme xylanase (four concentrations: 0, 4, 8, and 12 g.100 kg-1 flour) on the characteristics of loaf bread made with white wheat flour or whole grain wheat flour. Breads made from white flour and added with xylanase had higher specific volumes than those of the control sample (no enzyme); however, the specific volume did not differ significantly (p < 0.05) among the breads with different enzyme concentrations. All formulations made from whole grain wheat flour and added with xylanase also had specific volumes significantly higher than those of the control sample, and the highest value was found for the 8 g xylanase.100 kg-1 flour formulation. With respect to moisture content, the formulations with different enzyme concentrations showed small significant differences when compared to the control samples. In general, breads made with the addition of 8 g enzyme.100 kg-1 flour had the lowest firmness values, thus presenting the best technological characteristics.

Effects of genotype and environment on grain yield and quality traits in bread wheat (T. aestivum L.)

Genotype (G), environment (E) and their interaction (GEI) play an important role in the final expression of grain yield and quality attributes. A multi-environment trial in wheat was conducted to evaluate the magnitude of G, E and GEI effects on grain yield and quality of wheat genotypes under the three rainfed locations (hereafter environment) of Central Anatolian Plateau of Turkey, during the 2012-2013 cropping season. Grain yield (GY) and analyses of test weight (TW), protein content (PC), wet gluten content (WGC), grain hardness (GH), thousand kernel weight (TKW) and Zeleny sedimentation volume (ZSV) were determined. Allelic variations of high and low molecular weight glutenin subunits (HMW-GS and LMW-GS) and 1B/1R translocation were determined in all genotypes evaluated. Both HMW-Glu-1, 17+18, 5+10 and LMW-Glu-3 b, b, b corresponded to genotypes possessing medium to good quality attributes. Large variability was found among most of the quality attributes evaluated; wider ranges of quality traits were observed in the environments than among the genotypes. The importance of the growing environment effects on grain quality was proved, suggesting that breeders' quality objectives should be adapted to the targeted environments.

Performance of different drying methods and their effects on the physiological quality of grain sorghum seeds (S. bicolor (L.) Moench)

This experiment viewed to evaluate the physiological quality of grain sorghum seeds as well as to determine the respective drying curve of each of three drying methods. The seeds harvested at 18.9%, 18.1%, and 18.2% of moisture content were submitted to the following drying methods : a) under natural conditions, b) an intermittent dryer in which the combustion of firewood was the source of caloric energy, and c) a stationary dryer in which the source of caloric energy was the burning of liquefied petroleum gas. The experimental design was a completely randomized one with 25 repetitions of one hundred seeds each. The water contents and weight of one thousand seeds were evaluated. Seeds physiological quality was evaluated by germination and vigor tests. Seed drying rates were of 0.11, 1.25, and 0.55 percent points per hour (pph -1) for the natural, intermittent and stationary drying methods, respectively. The intermittent treatment permits the highest loss of water in the shortest period of time, and germination and vigor remaining unchanged.

Pollen and grain size records in abyssal sediments of the northwest Pacific Ocean as proxies of Plio-Pleistocene climate change /

A distinctive period of global change occurred during the PUocene between the warm Miocene and subsequent Quaternary cooling. Samples from Ocean Drilling Project Site 11 79 (-5586 mbsl, 41°4'N, 159°57'E), Site 881 (-5765 mbsl, 47°6.133'N, 161°29.490'E) and Site 882 (-3255 mbsl, 50°22'N, 167°36'E) were studied to determine the magnitude and composition ofterrigenous flux to the western mid-latitude North Pacific and its relation to climate change in East Asia since the mid-Pliocene. Dust-sized particles (including pollen), sourced from the arid regions and loess plateaus in East Asia are entrained by prevailing westerly winds and transported to the midlatitude northwest North Pacific Ocean. This is recorded by peaks in the total concentration of pollen and spores, as well as the mean grain size of allochthonous and autochthonous silicate material in abyssal marine sediments. Aridification of the Asian interior due to the phased uplift of the Himalayan-Tibetan Plateau created the modem East Asian Monsoon system dominated by a strengthening of the winter monsoon. The winter monsoon is further enhanced during glacials due to the expansion of desert and steppe environments at the expense ofwoodlands and forests recorded by the composition of palynological assemblages. The late Pliocene-Pleistocene glacials at ODP Sites 1 179, 881, and 882 are characterized by increases in grain size, magnetic susceptibility, pollen and spore concentrations around 3.5-3.3, 2.6-2.4, 1.7-1.6, and 0.9-0.7 Ma (ages based on magnetostratigraphic and biostratigraphic datums). The peaks during these times are relatively rich in pollen taxa derived primarily from steppe and boreal vegetation zones, recording cool, dry climates. The overall size increase of sediment and abundance of terrestrial palynomorphs record enhanced wind strength. The increase in magnitude of pollen and spore concentrations as well as grain size record global cooling and Northern Hemisphere glaciation. The peaks in grain size as well as pollen and spore abundance in marine sediments correlate with the mean grain size of loess in East Asia, consistent with the deflation of unarmoured surfaces during glacials. The transport of limiting nutrients to marine environments enhanced sea surface productivity and increased the rate of sediment accumulation.

Voucher #22 to James McCoppen (copy) which includes a letter from James McCoppen regarding a claim for having water backed up into his grain and grass by the embankment of the railroad. The letter is dated June 24, 1857 and the voucher is dated Jul. 1, 1857

Voucher #22 to James McCoppen (copy) which includes a letter from James McCoppen regarding a claim for having water backed up into his grain and grass by the embankment of the railroad. The letter is dated June 24, 1857 and the voucher is dated Jul. 1, 1857.

Évaluation de la vulnérabilité des fermes productrices de maïs-grain du Québec aux variabilités et changements climatiques : les cas de Montérégie-Ouest et du Lac-Saint-Jean-Est

Réalisées aux échelles internationales et nationales, les études de vulnérabilité aux changements et à la variabilité climatiques sont peu pertinentes dans un processus de prise de décisions à des échelles géographiques plus petites qui représentent les lieux d’implantation des stratégies de réponses envisagées. Les études de vulnérabilité aux changements et à la variabilité climatiques à des échelles géographiques relativement petites dans le secteur agricole sont généralement rares, voire inexistantes au Canada, notamment au Québec. Dans le souci de combler ce vide et de favoriser un processus décisionnel plus éclairé à l’échelle de la ferme, cette étude cherchait principalement à dresser un portrait de l’évolution de la vulnérabilité des fermes productrices de maïs-grain des régions de Montérégie-Ouest et du Lac-St-Jean-Est aux changements et à la variabilité climatiques dans un contexte de multiples sources de pression. Une méthodologie générale constituée d'une évaluation de la vulnérabilité globale à partir d’une combinaison de profils de vulnérabilité aux conditions climatiques et socio-économiques a été adoptée. Pour la période de référence (1985-2005), les profils de vulnérabilité ont été dressés à l’aide d’analyses des coefficients de variation des séries temporelles de rendements et de superficies en maïs-grain. Au moyen de méthodes ethnographiques associées à une technique d’analyse multicritère, le Processus d’analyse hiérarchique (PAH), des scénarios d’indicateurs de capacité adaptative du secteur agricole susmentionné ont été développés pour la période de référence. Ceux-ci ont ensuite servi de point de départ dans l’élaboration des indicateurs de capacité de réponses des producteurs agricoles pour la période future 2010-2039. Pour celle-ci, les deux profils de vulnérabilité sont issus d’une simplification du cadre théorique de « Intergovernmental Panel on Climate Change » (IPCC) relatif aux principales composantes du concept de vulnérabilité. Pour la dimension « sensibilité » du secteur des fermes productrices de maïs-grain des deux régions agricoles aux conditions climatiques, une série de données de rendements a été simulée pour la période future. Ces simulations ont été réalisées à l’aide d’un couplage de cinq scénarios climatiques et du modèle de culture CERES-Maize de « Decision Support System for Agrotechnology Transfer » (DSSAT), version 4.0.2.0. En ce qui concerne l’évaluation de la « capacité adaptative » au cours de la période future, la construction des scénarios d’indicateurs de cette composante a été effectuée selon l’influence potentielle des grandes orientations économiques et environnementales considérées dans l’élaboration des lignes directrices des deux familles d’émissions de gaz à effet de serre (GES) A2 et A1B. L’application de la démarche méthodologique préalablement mentionnée a conduit aux principaux résultats suivants. Au cours de la période de référence, la région agricole du Lac-St-Jean-Est semblait être plus vulnérable aux conditions climatiques que celle de Montérégie-Ouest. En effet, le coefficient de variation des rendements du maïs-grain pour la région du Lac-St-Jean-Est était évalué à 0,35; tandis que celui pour la région de Montérégie-Ouest n’était que de 0,23. Toutefois, par rapport aux conditions socio-économiques, la région de Montérégie-Ouest affichait une vulnérabilité plus élevée que celle du Lac-St-Jean-Est. Les valeurs des coefficients de variation pour les superficies en maïs-grain au cours de la période de référence pour la Montérégie-Ouest et le Lac-St-Jean-Est étaient de 0,66 et 0,48, respectivement. Au cours de la période future 2010-2039, la région du Lac-St-Jean-Est serait, dans l’ensemble, toujours plus vulnérable aux conditions climatiques que celle de Montérégie-Ouest. Les valeurs moyennes des coefficients de variation pour les rendements agricoles anticipés fluctuent entre 0,21 et 0,25 pour la région de Montérégie-Ouest et entre 0,31 et 0,50 pour la région du Lac-St-Jean-Est. Néanmoins, en matière de vulnérabilité future aux conditions socio-économiques, la position relative des deux régions serait fonction du scénario de capacité adaptative considéré. Avec les orientations économiques et environnementales considérées dans l’élaboration des lignes directrices de la famille d’émission de GES A2, les indicateurs de capacité adaptative du secteur à l’étude seraient respectivement de 0,13 et 0,08 pour la Montérégie-Ouest et le Lac-St-Jean-Est. D’autre part, en considérant les lignes directrices de la famille d’émission de GES A1B, la région agricole du Lac-St-Jean-Est aurait une capacité adaptative légèrement supérieure (0,07) à celle de la Montérégie-Ouest (0,06). De façon générale, au cours de la période future, la région du Lac-St-Jean-Est devrait posséder une vulnérabilité globale plus élevée que la région de Montérégie-Ouest. Cette situation s’expliquerait principalement par une plus grande vulnérabilité de la région du Lac-St-Jean-Est aux conditions climatiques. Les résultats de cette étude doivent être appréciés dans le contexte des postulats considérés, de la méthodologie suivie et des spécificités des deux régions agricoles examinées. Essentiellement, avec l’adoption d’une démarche méthodologique simple, cette étude a révélé les caractéristiques « dynamique et relative » du concept de vulnérabilité, l’importance de l’échelle géographique et de la prise en compte d’autres sources de pression et surtout de la considération d’une approche contraire à celle du « agriculteur réfractaire aux changements » dans les travaux d’évaluation de ce concept dans le secteur agricole. Finalement, elle a aussi présenté plusieurs pistes de recherche susceptibles de contribuer à une meilleure évaluation de la vulnérabilité des agriculteurs aux changements climatiques dans un contexte de multiples sources de pression.

SUPPLY CHAIN MANAGEMENT IN INDIAN PETROLEUM REFINING INDUSTRY

Model development for selection of location for refinery in India and identification of characteristics to be looked into when configuring it and to develop models for integrated supply chain planning for a refinery. Locating and removing inbound, internal and outbound logistic problems in an existing refinery and overall design of a logistic information system for a refinery are the main objectives of the study. A brief description of supply chain management (SCM), elements of SCM and their significance, logistics cost in petroleum industry and its impacts, and dynamics of petroleum its logistic practices are also to be presented. Scope of application of SCM in petroleum refinery will also be discussed. A review of the investigations carried out by earlier researches in the area of supply chain management in general and with specific reference to petroleum refining.