Estimation of variance components and prediction of breeding values in rubber tree breeding using the REML/BLUP procedure

The present paper deals with estimation of variance components, prediction of breeding values and selection in a population of rubber tree [Hevea brasiliensis (Willd. ex Adr. de Juss.) Müell.-Arg.] from Rio Branco, State of Acre, Brazil. The REML/BLUP (restricted maximum likelihood/best linear unbiased prediction) procedure was applied. For this purpose, 37 rubber tree families were obtained and assessed in a randomized complete block design, with three unbalanced replications. The field trial was carried out at the Experimental Station of UNESP, located in Selvíria, State of Mato Grosso do Sul, Brazil. The quantitative traits evaluated were: girth (G), bark thickness (BT), number of latex vessel rings (NR), and plant height (PH). Given the unbalanced condition of the progeny test, the REML/BLUP procedure was used for estimation. The narrow-sense individual heritability estimates were 0.43 for G, 0.18 for BT, 0.01 for NR, and 0.51 for PH. Two selection strategies were adopted: one short-term (ST - selection intensity of 8.85%) and the other long-term (LT - selection intensity of 26.56%). For G, the estimated genetic gains in relation to the population average were 26.80% and 17.94%, respectively, according to the ST and LT strategies. The effective population sizes were 22.35 and 46.03, respectively. The LT and ST strategies maintained 45.80% and 28.24%, respectively, of the original genetic diversity represented in the progeny test. So, it can be inferred that this population has potential for both breeding and ex situ genetic conservation as a supplier of genetic material for advanced rubber tree breeding programs. Copyright by the Brazilian Society of Genetics.

Mapeamento da produtividade e perímetro do tronco de clones de seringueira em argissolo vermelho amarelo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Investigation of the metal/porcelain interface in LASER-welded Ni-Cr-Mo alloy

The interface formed between the metal and the porcelain of laser-welded Ni-Cr-Mo alloy was studied on a metallurgical basis. The characterization was carried out by using optical microscope, electron scan microscopy and X-ray dispersive spectroscopy techniques and mechanical three-point flexion tests, in the laser-welded region, with and without porcelain. The union of the porcelain with the alloy is possible only after the oxidation of the metallic surface and the subsequent application of a bonding agent known as opaque. The porcelain applied to the base metal and weld bead showed different behaviours - after the flexion test, the base metal showed cracks, while that in the weld bead broke away completely. It was noted that the region subjected to laser welding had lower adherence to the porcelain than the base metal region, due to microstructural refinement of the weld bead. These results can be shown by the X-ray dispersive spectroscopy carried out on the regions studied. The flexion tests demonstrated that the Ni-Cr-Mo alloy subject to laser welding had significant alterations in its mechanical properties after application of the porcelain.

Digital radiography for the inspection of weld seams of pipelines - better sensitivity

Conventional radiography, using industrial radiographic films, has its days numbered. Digital radiography, recently, has taken its place in various segments of products and services, such as medicine, aerospace, security, automotive, etc. As well as the technological trend, the digital technique has brought proven benefits in terms of productivity, sensitivity, the environment, tools for image treatment, cost reductions, etc. If the weld to be inspected is on a serried product, such as, for example, a pipe, the best option for the use of digital radiography is the plane detector, since its use can reduce the length of the inspection cycle due to its high degree of automation. This work tested welded joints produced with the submerged arc process, which were specially prepared in such a way that it shows small artificial cracks, which served as the basis forcomparing the sensitivity levels of the techniques involved. After carrying out the various experiments, the digital meth odshowed the highest sensitivity for the image quality indicator (IQI) of the wire and also in terms of detecting small discontinuities, indicating that the use of digital radiography using the plane detector had advantages over the conventional technique (Moreira et al. Digital radiography, the use of plane detectors for the inspection of welds in oil pipes and gas pipes.9th COTEQ and XXV National Testing Congress for Non Destructive Testing and Inspection; Salvador, Bahia, Brazil and Bavendiek et al. New digital radiography procedure exceeds film sensitivity considerably in aerospace applications. ECNDT; 2006; Berlin). The works were carried out on the basis of the specifications for oil and gas pipelines, API 5L 2004 edition (American Petroleum Institute. API 5L: specification for line pipe. 4th ed. p. 155; 2004) and ISO 3183 2007 edition (International Organization for Standardization, ISO 3183. Petroleum and gas industries - steel pipes for pi pelines transportation systems. p. 143; 2007). © 2010 Taylor & Francis.

Desenvolvimento corporal de novilhas leiteiras suplementadas com minerais inorgânicos e orgânicos em pastejo na época das águas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito do genótipo paterno e sistemas de pastejo no desenvolvimento fetal e nas características ao nascimento de bovinos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo da microestrutura e da resistência à corrosão integranular em chapas soldadas de aços inoxidáveis austeníticos série 304L após goivagem ao arco elétrico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Soldagem em laminas finas de hastelloy c-276 por laser pulsado Nd:YAG

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da soldagem GMAW convencional e pulsada de aço estrutural temperado e revenido utilizando eletrodo de alma metálica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeitos do pré-aquecimento e parâmetros de pulso sobre a microestrutura e propriedades mecânicas de solda em aço ARBL

Pós-graduação em Engenharia Mecânica - FEB

Efeito dos parâmetros de pulso sobre as características geométricas e desempenho da soldagem com arame tubular autoprotegido e corrente pulsada

Pós-graduação em Engenharia Mecânica - FEB

Suplementação alimentar e índices de área foliar residual sobre as características de carcaça e qualidade da carne de cordeiros

Pós-graduação em Zootecnia - FCAV

Alívio de tensões residuais em juntas soldadas de caixa espiral de turbina hidraúlica

Pós-graduação em Engenharia Mecânica - FEG

Estudo da densidade óptica e da resistência à flexão de três pontos em corpos-de-prova fundidos com a liga metálica High Bond (Co-Cr), com secções vertical 90°, diagonal 45° e diagonal 22,5°, soldados pelas técnicas convencional e TIG

Pós-graduação em Odontologia - FOA

Componentes principais na elaboração de índices de provas de desempenho em bovinos

The principal component analysis assists the producers in making decision of which evaluated features must be maintained in performance tests indexes, according to the variation present in these animals evaluated. The objective in this study was to evaluate a set of characteristics measured in a performance test in semifeedlot cattle of the Simmental and Angus breeds, by means principal component analysis (PC), aim to identify the features that represent most of the phenotypic variation for preparation of indexes. It was used data from 39 Angus and 38 Simmental bulls from the Santa Éster farm, located in Silvianópolis - MG. The performance test period was from october 2014 to february 2015. The features evaluated in the test were: final weight (FW), average daily gain weight (GW), respiratory rate (RR), haircoat temperature (HT) and rectal (RT), hair number (HN), hair length (HL), hair thickness (HT), muscularity (MUSC), racial characteristics, angulation, reproductive and balance (BAL), height of the front and back, width and length of croup, body length, depth and heart girth, subcutaneous fat thickness and rump (FTR), loin eye area and marbling (MAR). It was used PRINCOMP from SAS program for procedure the PC analysis. It was found that of the 27 features evaluated, the first four PC for Simmental breed explained 74% total variation data. The four PC selected with the corresponding weighting coefficients formed the following index: (0.27 * FW) + (0.47 * MUSC) + (0.50 * HL) + (0.39 * HT). Since the characteristics related to the adaptability of great importance for the studied breed, it was decided to keep the index of evidence for the Angus breed, the feature hair number, because there is a feature that presented a great variability and occupied one of the first principal component. Thus, the Angus index was composed by five features, with 79% total variation data, resulting in the following formula: (0.26 * FW) + (0.33 * BAL) + (0.58 * MAR) - (0.43 * FTR) – (0.38 * HN). By the principal component analysis it was possible to minimize the features number to be evaluated on performance tests from that farm, making the animal selection rapidly and accurate.